Difference between revisions of "Minnowboard:SPI Boot flash"

From eLinux.org
Jump to: navigation, search
(Applications and Hardware)
Line 18: Line 18:
 
** [http://www.dediprog.com/SPI-flash-in-circuit-programming/ISP-Evaluation-Kit SF100] from [http://www.dediprog.com DediProg]
 
** [http://www.dediprog.com/SPI-flash-in-circuit-programming/ISP-Evaluation-Kit SF100] from [http://www.dediprog.com DediProg]
 
** [https://www.kernel.org/doc/Documentation/spi/spidev SPIDev] userspace interface for the Linux Kernel
 
** [https://www.kernel.org/doc/Documentation/spi/spidev SPIDev] userspace interface for the Linux Kernel
 +
 +
 +
 +
 +
[[Category: MinnowBoard]]
 +
[[Category: CircuitCo]]

Revision as of 21:00, 14 May 2013

the MinnowBoard uses a SPI based serial flash memory to load the initial code into the Intel Atom E640 series processor. The MinnowBoard uses a WinBond W25Q32 (datasheet) which has a total of 4096KB of storage which can be flashed with a UEFI image or other custom firmware.

Programming Interface

the MinnowBoard has a 2x4 header that has 0.1" spacing for programming the SPI based serial flash memory.

table


Applications and Hardware

  • Flashrom is an open source utility that allows you to work with the SPI based serial flash memory on the MinnowBoard.
  • Flashrom supports a wide range of flash devices (Supported Hardware) including the WinBond W25Q32.
  • Flashrom can automatically detect the presence of the WinBond W25Q32 and provide full read/erase/write functionality.
  • Flashrom can use the many open as well as proprietary hardware tools such as