Minnowboard:Toggling LED
Contents
Summary
In this guide, we will toggle a user LED on the MinnowBoard step-by-step. This guide is for beginners who are just getting started with the MinnowBoard.
Contents of the box
When you purchase a MinnowBoard, the following items are included in the box as shown in Figure -1:
- MinnowBoard
- 5V Power Adaptor
- 4GB micro SD card preloaded with Angstrom Linux Distribution(Yocto Project Compatible)
Anatomy of a MinnowBoard
Top Side
This section outlines the various components on the MinnowBoard. Figure -2 below annotates the important components on the top side of the MinnowBoard.
Below is a brief description of the micro USB and debugger ports which are annotated in Figure -2.
• Micro USB: This port can be used to access the contents of the MinnowBoard's microSD card as a removable drive on your desktop computer. Simply boot the MinnowBoard up and connect it to your desktop computer using a micro-USB cable.
• Debugger: This mini-USB port allows you to interact with the serial console of the MinnowBoard, so you can log into it and view debugging messages even when an external monitor and keyboard are not connected to the MinnowBoard. You need to use a terminal emulator on your desktop computer to access the serial console at a baud rate of 115200. This is demonstrated later in this guide in the Booting Angstrom section.
Bottom Side
Figure -3 below annotates the important components on the bottom side of the MinnowBoard.
Specifications
For detailed specifications of the MinnowBoard, please visit our website below:
http://www.minnowboard.org/technical-features/
Preparing the MicroSD Card
Please note that this section is completely optional. The MinnowBoard already comes with a microSD card that is preloaded with a working Angstrom Linux image. In case you want to use a newer image or want to program the microSD from scratch, this section covers it all. These steps were created using an Ubuntu 12.10 64-bit system.
Note:- This section is for Linux users only. If you are using Windows, please skip to the Windows Section. If you are using Mac, please skip to the OS X section.
Step-1:
First download the latest Angstrom Linux image for MinnowBoard using the following link:
Latest Angstrom Image for the MinnowBoard
At the time of writing this guide, the latest image available for download was 'Angstrom-development-GNOME-image-eglibc-ipk-v2012.12-minnow-2013.07.10.img.xz'
Step-2:
Insert the microSD card into a microSD compatible writer in your desktop computer. Now, identify the disk device filename for your microSD card. You can do this by opening the Disk Utility application (sometimes also called Disks) in Ubuntu and clicking on the microSD card entry. See the Device field to determine the raw device name of your microSD card. Note that this device name should specify an entire disk device (e.g, /dev/sde), and not an individual disk partition (e.g, /dev/sde1)
Step-3:
Now, make sure all possible disk partitions from the microSD card are unmounted by typing the command below into your terminal:
$ sudo umount /dev/sdX?*
Here 'sdX' stands for the raw device id of the microSD card.
Step-4:
Now unpack the image to the microSD card by typing the command below in a terminal window:
$ xzcat Angstrom-development-GNOME-image-eglibc-ipk-v2012.12-minnow-2013.07.10.img.xz | sudo dd of=/dev/sdX
User LED on the MinnowBoard
There are a total of five LED(s) on the MinnowBoard - D11, D12, D13, D14, D15 as shown in Figure -4. Their functions have been listed in the table below:
Sr. No. | LED | Function |
---|---|---|
1 | D11 | Heartbeat/USER LED* |
2 | D12 | microSD card activity/USER LED* |
3 | D13 | PWR |
4 | D14 | CPU HOT |
5 | D15 | PWROK |
Now, let us understand these functions in a bit more detail:
- Heartbeat: The Heartbeat LED blinks at a regular rate to indicate that the hardware is operating properly, and that the CPU hasn't locked up. This is useful in embedded systems where you may not always have a board connected to a display to confirm its operation.
- microSD Card Activity: This LED blinks when there is disk activity happening on the microSD card port.
- CPUHOT: When this LED is on, it indicates that the CPU temperature is abnormally high. This may suggest that the MinnowBoard is running in too hot of an environment, or that there is a problem with the CPU heatsink attachment. The MinnowBoard will shut off in the event that the CPU temperature reaches a level that could possibly damage itself, and CPUHOT represents a warning temperature before this state is reached.
- PWROK: This LED indicates that the power source is operating within required tolerances for the MinnowBoard.
So, there are two USER LED(s) on the MinnowBoard - D11 and D12 but by default they cannot be used as USER LED(s).
The user LED(s) are accessible via the user space in Linux at the location below on the filesystem:
/sys/class/leds
There is one directory per user LED, named as shown below:
/sys/class/leds/minnow_led0 /sys/class/leds/minnow_led1
Here, led0 is D11, while led1 is D12. Inside each one of those directories, there is a file named "brightness". If you write a "1" or a "0" to this file, then you can control the status of that led, i.e. , toggle it ON or OFF respectively.
Extra Credit
This is an optional section which you can read for further understanding. In a nutshell, we are trying to access the on board USER LED(s) via userspace in Linux. To be more precise we are using the sysfs interface. sysfs is a virtual filesystem which translates the hardware devices and busses attached to the system(board in our case) into a file system hierarchy that can be accessed from userspace. sysfs is generated by the kernel and always mounted at /sys. As discussed earlier, trigger for D11 and D12 LEDs has to be changed to make them function as USER LEDs. I would describe 'trigger' as the API used to link a LED to an 'event' in kernel space. Here, 'event' could be microSD card or Ethernet activity, heartbeat, power etc. To understand this better, take LED D11 for example. The trigger for D11 has been set by default to heartbeat. So, to use it as an USER LED, we have to change the trigger for it to 'none' as shown in Figure - 5 below:
Booting Angstrom
Step-1:
First insert the card into the microSD card slot label side up as shown in Figure -4.
Step-2:
Next, connect an external keyboard and mouse to the MinnowBoard. Then connect a USB mini cable to your computer and the MinnowBoard as shown in Figure -5. This connection will be used to access the serial console of the MinnowBoard.
Step-3:
Now power up the MinnowBoard, connect the 5V/2.5A power supply to it as shown in Figure -6:
Step-4:
Access the MinnowBoard's serial console via a terminal emulator:
$ sudo screen /dev/ttyUSB0 115200
Note:- You can also use minicom, but screen is much easier to use! Also in most cases the virtual USB serial port is ttyUSB0. If it does not work, try ttyUSB1
Step-5:
You should see a similar Angstrom login screen as shown in Figure - 7. The username is 'root' and there is no password - just press the Enter key.
If you have an external display connected to the MinnowBoard via the HDMI port, you should see output similar to that shown below in Figure - 8
My Setup
Figures - 9,10 show my setup
Windows Users
This section is for those who are using a Windows machine to interact with the MinnowBoard.
Serial Terminal
We will be using Teraterm as our terminal application. Please follow the steps below to set up Teraterm:
Step-1:
Download the latest version of Teraterm using the link below:
At the time of writing this guide, the latest version was '4.78' .
Step-2:
Install the Teraterm software by double clicking on the exe file downloaded earlier. If it displays a security warning, accept it and click on 'Run' as shown in Figure - 11 below:
Step-3:
Now just follow the on-screen instructions to install the software. It is advised to do the 'full' installation instead of the 'standard' one as shown in Figure - 12 below:
Step-4:
Launch Teraterm. Then go to Setup>Serial port and change the settings as shown in Figure - 13 below:
Step-5:
Then go to File>New connections and select the Serial option and chose the appropriate COM port as shown in Figure - 14 below
Step-6:
Then connect the required accessories as described earlier in this guide and power up the MinnowBoard. If all went well, you should see a login screen in Teraterm as shown in Figure - 15 below:
Preparing the microSD card
Step-1:
First, download the latest Angstrom Linux image from the link below:
Step-2:
Next, download the 7-zip utility from the link below and install it:
Step-2:
Decompress the previously downloaded Angstrom image using 7-zip as shown in Figure - 16 below. The resulting file should have an extension '.img' .
Step-3:
Image Writer for Windows is needed to write the .img file to a microSD card. Download and install Image Writer using the link below: :
Step-4:
Insert the mircoSD card into the computer using an appropriate adapter. Next, launch the image writer software we just installed earlier. Select the Angstrom image and write it to the microSD card as shown in Figure - 17 below.
Mac Users
This section is for those who are using OS X to interact with the MinnowBoard.
Serial Terminal
We will be using the 'screen' command which is by default a part of the bash shell on OS X. Now to use screen command, the FTDI driver(it is enables communication between the development board and computer over USB) has to be installed. Please follow the steps below to install it:
Step-1:
Download the latest ftdi driver for Mac OS X from the link below and make sure that you select the correct file corresponding to your computer architecture(32/64 bit):
Step-2:
Double click on the downloaded file to start the installation procedure.
Step-3:
You will have two files inside the downloaded driver package as shown below in Figure - 18. The first file, ending with 10_3 is specific for Mac OS X version 10.3 . The second file is for all other versions, newer than 10.3 .
Step-4:
Based on your Max OS X version, select the appropriate and double click it to proceed further.
Step-5:
You will now be greeted with an ftdi installer screen as shown in Figure - 19.
Step-6:
Proceed forward by pressing the 'continue' button till you reach the “installation type” screen as shown below in Figure -20.
Step-7:
Now press the 'install' button and wait for it to finish as shown in Figure - 21.
Step-8:
If the installation was successful, you should be greeted by a screen similar to the one shown in Figure - 22
Step-9:
Then connect the required accessories as described earlier in this guide and power up the MinnowBoard.
If everything went well, you will see new entries in the /dev directory:
/dev/cu.usbserial-xxxxxxxx /dev/tty.usbserial-xxxxxxxx
Here, xxxxxxxx is either the device's serial number or, for unserialized devices, a location string that depends on which USB port your device is connected to. /dev can be accessed through the Terminal application. The Terminal application can be launched by selecting Go > Applications > Utilities > Terminal. Now fire up the terminal in Mac OS X and type the following command in it:
$ cd /dev
Step-10:
Access the MinnowBoard's serial console via a terminal emulator and you should be greeted by the Angstrom screen as shown in Figure - 23:
$ sudo screen /dev/tty.usbserial-xxxxxxxx 115200
Preparing the microSD card
Step-1:
First, download the latest Angstrom Linux image from the link below:
Step-2:
Next, install the “The Unarchiver” application(it is free) from the app store on Mac OS X as shown in Figure - 24
Step-3:
Then unpack the downloaded angstrom image using the unarchiver application as shown below in Figure -25
Step-4:
Insert the microSD card into a microSD compatible writer in your computer. Now, identify the disk device filename for your microSD card. You can do this by typing the command below, before and after you insert the microSD card and comparing the outputs to see the newly added device:
$ df-h
Note:- If you notice closely, the microSD card entry will be in the form of /dev/diskNsX where 'N' and 'X' are numbers. diskNsX is basically the device id of your microSD card. So, to obtain the raw device id from this, remove the 's' and 'X' from the device id. The raw device id should be in the form of diskN .
Step-5:
Now, make sure all possible disk partitions from the microSD card are unmounted by typing the command below into your terminal: $ sudo umount /dev/diskN?* Here 'diskN' stands for the raw device id of the microSD card.
Step-6:
Now unpack the image to the microSD card by typing the command below in a terminal window:
$ sudo dd if=Angstrom-development-GNOME-image-eglibc-ipk-v2012.12-minnow-2013.07.10.img of=/dev/rdiskN
Note:- In the above command we subtly replaced “diskN” with “rdiskN” because in the latter case, you are writing to a buffered device and hence the process becomes much faster!
Resources
Please refer the websites below for more videos, tutorials, and projects you can do with your MinnowBoard: