View source for Minnowboard talk:MaxLures
|Thread title||Replies||Last modified|
|image for IDP JTAG Lure needs to be refreshed||5||11:32, 30 April 2015|
|CCO deleting other people's work||2||12:15, 24 February 2015|
You do not have permission to edit this page, for the following reasons:
- The action you have requested is limited to users in the group: Users.
- You must confirm your email address before editing pages. Please set and validate your email address through your user preferences.
You can view and copy the source of this page.
wait a minute! a closer examination of Revision A2 doesn't look right either!
per the prints and footprints at https://www.samtec.com/technical-specifications/Default.aspx?SeriesMaster=BSH:
shouldn't the alignment pins be on the pin-2 side?!
Has anyone successfully used this adapter, in any revision, in combination with an Intel ITP kit (XDP3) or equivalent (such as ASSET USB-XDP3, PODII or Arium XDP3/XDP3e?)??
We've got some internally that we know work, if it would be helpful I'm happy to double check the schematic vs. what we've got and know works, if they are wrong I can let the manufacturer know, see if we can get a more up to date set of files put together.
Thanks much for your reply, Warthog9! I've looked at the schematic and it seems fine - what seems to be the problem is that it seems it's not possible to mount the BSH-030 on the Revision A2 adapter such that the socket pins will line up with the signal traces as required! (of course, the error may be mine ...) Is your adapter internally built? If it's based on the CircuitCo PCB, which Revision? Thanks again!
I find it distressing that a Company can delete MY work without MY permission.
I don't know whether to attribute this to ineptitude or malice.
either way CCO should NOT be able to do this to other users.
May you PM the one that deleted that content and suggest to move it back it could be a mistake