View source for Minnowboard talk:MaxLures

as it doesn't match the current design files (per Revision A2). And, in particular, because it appears that the orientation of the Samtec BSH-030 is not correct on the Revision A1, at least per the image shown!

Note also, that IDP is not a conventional term of art - I believe that it should read as ITP (for in-target probe).

Aley asset (talk)

wait a minute! a closer examination of Revision A2 doesn't look right either!

per the prints and footprints at https://www.samtec.com/technical-specifications/Default.aspx?SeriesMaster=BSH:

- PDF File  BSH - .5mm (.0197") Basic Socket Strip
- PDF File  BSH - Surface Mount Footprint

shouldn't the alignment pins be on the pin-2 side?!

Aley asset (talk)

Has anyone successfully used this adapter, in any revision, in combination with an Intel ITP kit (XDP3) or equivalent (such as ASSET USB-XDP3, PODII or Arium XDP3/XDP3e?)??

Aley asset (talk)

We've got some internally that we know work, if it would be helpful I'm happy to double check the schematic vs. what we've got and know works, if they are wrong I can let the manufacturer know, see if we can get a more up to date set of files put together.

Warthog9 (talk)

Aley asset (talk)

Properly, yes, it should be called ITP vs. JTAG. We are working on a more normal openjtag interface but it wouldn't use this connector either

Warthog9 (talk)

I find it distressing that a Company can delete MY work without MY permission.

I don't know whether to attribute this to ineptitude or malice.

either way CCO should NOT be able to do this to other users.

May you PM the one that deleted that content and suggest to move it back it could be a mistake

Tom, what was deleted? I can easily undelete if it's not a legitimate deleted. Also, if you want, you can Protect any pages you work on.