Revision as of 06:07, 5 October 2015 by Ethernode (talk | contribs)
Jump to: navigation, search

Omxplayer is a video player specifically made for the Raspberry Pi's GPU made by Edgar (gimli) Hucek from the XBMC/Kodi project. It relies on the OpenMAX hardware acceleration API, which is the Broadcom's VideoCore officially supported API for GPU video/audio processing.

Raspberry Pi forum user spenning made precompiled binaries available on the forum. See here.


z           Show Info
1           Increase Speed
2           Decrease Speed
j           Previous Audio stream
k           Next Audio stream
i           Previous Chapter
o           Next Chapter
n           Previous Subtitle stream
m           Next Subtitle stream
s           Toggle subtitles
d           Subtitle delay -250 ms
f           Subtitle delay +250 ms
q           Exit OMXPlayer
Space or p  Pause/Resume
-           Decrease Volume
+           Increase Volume
Left Arrow  Seek -30
Right Arrow Seek +30
Down Arrow  Seek -600
Up Arrow    Seek +600



You do not need to download an MP4 file to watch it with Omxplayer. If you have the URL of a (H.264) rtmp:// stream, just stream it with:

omxplayer rtmp://...

To stream a (H.264) rtmpt://... URL with Omxplayer, just change the head rtmp:// to rtmpt://.


Support for RTSP was added in 2012[1] (for instance, allowing the use of VLC media player as the streaming server).


omxplayer -o local rtsp://


It is possible to select the audio output by specifying -o or --adev on the command line between:

  • local: analog output
  • hdmi: hdmi output (hdmi_drive=2 is then required in config.txt)
  • both: both outputs


omxplayer -o hdmi file.qt


Black screen after playback

If you get a black screen on your X11 desktop after Omxplayer is finished, you can use this command to restore your view:

xrefresh -display :0

Or you can use a small Bash script for video playback to do this every time:

omxplayer "$@"
xrefresh -display :0

On Raspbian, xrefresh is part of the x11-xserver-utils package (apt-get install x11-xserver-utils).

No rights to VCHIQ

On bare installations of the default distributions, Omxplayer often has insufficient permissions to access /dev/vchiq. One solution would be to run Omxplayer as root, but a nicer solution is to add a udev rule so that /dev/vchiq is also accessible from other users. To accomplish this, do the following under root:

# echo 'SUBSYSTEM=="vchiq",GROUP="video",MODE="0660"' > /etc/udev/rules.d/10-vchiq-permissions.rules

Now add yourself to the group named 'video':

# usermod -aGvideo USERNAME

Reboot the Raspberry Pi, and you should be able to run Omxplayer without the vchiq-error showing up.


When using HDMI make sure to pass '-o hdmi' to Omxplayer if you want the audio to play through the HDMI cable:

omxplayer -o hdmi videofile.mp4

Helpful Links