Difference between revisions of "Opensourcemid"

From eLinux.org
Jump to: navigation, search
(Optional module - E380)
(Optional module - W338)
Line 96: Line 96:
Main functions:<br>
Main functions:<br>
Internet surfing, message, phonebook<br>
Support Micro-SD card(up to 8GB)、USIM card management<br>
Support Micro-SD card(up to 8GB)、USIM card management<br>
USB 2.0 high-speed transmission, driver installed automatically<br>
USB 2.0 high-speed transmission, driver installed automatically<br>

Revision as of 02:30, 4 May 2011


OpenSourceMID.org is founded by a group of engineers enthusiastic in modern technologies and open source software development and sponsored by Timll Technic Inc. in China. It is an open community to provide support and discussions for K7 MID or any other open source MID projects through this website.

OpenSourceMID.org, itself, is an Open Source project. This means, first, that we offer not only a product but a process, and second, that we depend upon the contributions of developers and endusers to make that process happen. The easiest way for you to help us out is to join the overall OpenSourceMID.org project by join OpenSourceMID Community.


K7 MID is a low-cost, high-performance handheld Mobile Internet Device featuring Texas Instruments' OMAP3530 ARM Cortex-A8 core processor with, wireless connectivity, touch screen control, GPS navigation systems and integrated power management with battery backup. It can support for both Android and WinCE operating systems and would be a complete solution that addresses all of the user's multimedia and communication needs on a single platform.

K7 schematic: Click here to download
K7 MID operation manual:
Click here to download (English)
Click here to download (Chinese)

K7 mainboard


Number Chip Description Datasheet
1 OMAP3530 The Processor File:OMAP3530-datasheet.pdf
2 MT29C2G48MAKLCJA-6IT 256MB NAND Flash + 256MB SDRAM File:MT29CxGxxMAxxxJA-6IT.pdf
3 TPS65930 Power Management File:TPS65930-datasheet.pdf
4 GSC3f/LPx GPS Chip File:GSC3f-datasheet.pdf
5 USB3320 High Speed USB Transceiver File:USB3320-datasheet.pdf
6 FE1.1 USB 2.0 High Speed 4-Port Hub Controller File:FE11-datasheet.pdf
7 APW7093 Step Down DC/DC Regulator File:APW7093-datasheet.pdf
8 TPS61032 Synchronous Boost Converter File:TPS61032-datasheet.pdf
9 BQ24070 Single-Chip Charge and System Power-Path Management IC File:BQ24070-datasheet.pdf
10 MMA8450Q 3-Axis, 8-bit/12-bit Digital Accelerometer File:MMA8450Q.pdf
11 74ALVC164245 16-bit Dual Supply Translating Transciever File:74ALVC164245-datasheet.pdf
12 WG7310 WLAN+BT+FM Module File:WG7310-datasheet.pdf
13 TSC2046 Touch Screen Controller File:TSC2046-datasheet.pdf
14 LM4890 1 Watt Audio Power Amplifier File:LM4890-datasheet.pdf

Optional module - E380

E380 is a Mini PCI-E 3G wireless communication card based on EV-DO Rev.A standard,it is applicable to CDMA 2000 1x and EVDO network,it supports CDMA 800MHz and 1900MHz frequency band,it can achieve global roaming.

Product features:
Size: 51mm(L)*30mm(W)*2.3mm(T)
Working voltage: 3.3 - 3.8V DC
Dual-antenna interface, support diversity antenna
Support CDMA 2000 1x ,EV-DO Rev.0,EV-DO Rev.A
Support CDMA 800/S1900 MHz

Performance parameters:
Maximum output power: (Class III) BAND CLASS 0 (800/1900MHz):+23dBm
Minimum controlled output power: <-50dBm
Sensitivity: <-104dBm (FER≤0.5%)
Spurious maximum output power: 900kHz: <-42dBc/30kHz 1.98MHz: <-54dBc/30kHz
Support high-speed data services
CDMA 1x UL:153.6kbit/s(Peak) DL:153.6kbit/s(Peak)
EVDO Rev.0 UL:153.6kbit/s(Peak) DL:2.4Mbit/s(Peak)
EVDO Rev.A UL:1.8Mbit/s(Peak) DL:3.1Mbit/s(Peak)

Main functions:
Support the China Telecom standard AT command set
Support the connection speed and traffic statistics
Support OTA function
Support 8K EVRC Voice Code
Embedded 3G wireless communication protocol stack

Optional module - E300


Optional module - W338

W338 is a HSDPA Internet card using USB interface. Its driver is installed automatically. It can also work as a Micro-SD card reader which supports up to 8GB.

Product features:
Size: 87.9mm(L)*27mm(W)*12.05mm(T)
Weight: 23g
Chipset: Qualcomm MSM6280

Performance parameters:
3G frequency band: UMTS 2100MHz
2G frequency band: GSM/GPRS/EDGE 850/900/1800/1900 MHz

Main functions:
Support Micro-SD card(up to 8GB)、USIM card management
USB 2.0 high-speed transmission, driver installed automatically
Single color LED can display a variety of state: real-time network state, working mode, error warning.

Environmental parameter:
Working temperature: -20~60℃
Storage temperature: -30~85℃
Shake: 15g(Peak), 10~500Hz


How to update the Android

1.You can download the system image files from OpensourceMID.
How to flash android2.JPG
2.You should insert the TF card before K7 is turned on.
How to flash android1.JPG

3.Connect the 5V power supply, press the Power key and Down key, the LCD will display the interface below:
How to flash android3.JPG
Press the enter key to select the "update system", the system updating will start.

4.Select the "exit", the system will reboot.

How to compile the Android source

Please download the pdf from K7_Android_Development_Manual, you can find the details on the pdf.
Chinese version pdf:Click here download.

Opensourcemid Googlecode

How to use the OTG port as the UART debug port

1. Download the USB driver for Windows "Littleton USB Driver for Windows.rar" and extract it.
2. Connect K7 to your computer's USB port. Windows will detect the device and launch the Found New Hardware wizard. Vista/7 users need to cancel the automatic driver update.
3. Select "Locate and install driver software."
4. Select "Browse my computer for driver software."
5. Click "Browse..." and locate the folder where you extracted the driver. As long as you specified the exact location of the installation package, you may leave "Include subfolders" checked or unchecked—it doesn't matter.
6. Click "Next." Vista/7 may prompt you to confirm the privilege elevation required for driver installation. Confirm it. The driver will be installed.
7. Download the Android SDK for Windows "android-sdk_r07-windows.zip" and extract it.
8. Run the cmd in Windows.
9. Enter the commands below:

cd D:\android-sdk-windows\tools
adb.exe shell

Now the OTG port is working as the UART debug port. You can install applications from computer. Enter the command below:

  adb.exe install D:\AdobeReaderv10.0.0.apk


How to update the WinCE

Please download the pdf from K7_MID_WinCE, you can find the details on the pdf.
Chinese version pdf:Click here download.

Opensourcemid Googlecode