Difference between revisions of "Panda How to add Power Switch"
KenMcGuire (talk | contribs) (Created page with "== Introduction == * The J6 expansion header on the PandaBoard allows for the addition of a power switch. == This is a Work In Progress, don't go by anything below this line. ==...") |
KenMcGuire (talk | contribs) |
||
| (2 intermediate revisions by the same user not shown) | |||
| Line 11: | Line 11: | ||
These are the materials you will need in addition to your Pandaboard. | These are the materials you will need in addition to your Pandaboard. | ||
| − | * | + | * Momentary Push Button Switch |
* Available from: | * Available from: | ||
| − | ** [http://www. | + | ** [http://www.sparkfun.com/products/9807 SparkFun] |
| − | ** [http://www. | + | ** [http://www.radioshack.com/product/index.jsp?productId=2062546 Radio Shack] |
| − | ** [http://www. | + | ** [http://www.sparkfun.com/products/9181 SparkFun] |
| − | |||
| − | |||
| − | + | * A 2 x X pin header .1" centers | |
| − | |||
| − | * A 2 x | ||
* Available from: | * Available from: | ||
** [http://www.frys.com/product/2069003?site=sr:SEARCH:MAIN_RSLT_PG Fry's] | ** [http://www.frys.com/product/2069003?site=sr:SEARCH:MAIN_RSLT_PG Fry's] | ||
** [http://www.sparkfun.com/products/116 Sparkfun Electronics] | ** [http://www.sparkfun.com/products/116 Sparkfun Electronics] | ||
** [http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=SAM1034-50-ND Digikey] | ** [http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=SAM1034-50-ND Digikey] | ||
| − | [[File: | + | [[File:header2.jpg|240px]] |
== Pinout == | == Pinout == | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
* J6 Pinout | * J6 Pinout | ||
| Line 50: | Line 36: | ||
* Solder the header into the J6 pins closest to the WIFI module | * Solder the header into the J6 pins closest to the WIFI module | ||
* Detail of the header soldered into J6 | * Detail of the header soldered into J6 | ||
| − | [[File: | + | [[File:board3.jpg|320px]] |
| + | |||
<br> | <br> | ||
| + | |||
| + | * Detail of switch plugged into pins 12 and 8 of j6 | ||
| + | |||
| + | [[File:button3.jpg|320px]] | ||
| + | |||
<br> | <br> | ||
| − | * | + | * Another way to add the switch is just solder it to pins 12 and 8. |
| − | + | ||
| − | [[File: | + | [[File:button4.jpg|320px]] |
| + | |||
<br> | <br> | ||
<br> | <br> | ||
| + | |||
== Notes == | == Notes == | ||
| − | + | ||
* First few pins of J6 | * First few pins of J6 | ||
| − | [[image: | + | [[image:j6_detail3.jpg|800px]] |
[[Category:PandaBoard]] | [[Category:PandaBoard]] | ||
Latest revision as of 12:08, 4 May 2011
Contents
Introduction
- The J6 expansion header on the PandaBoard allows for the addition of a power switch.
This is a Work In Progress, don't go by anything below this line.
Materials
These are the materials you will need in addition to your Pandaboard.
- Momentary Push Button Switch
- Available from:
- A 2 x X pin header .1" centers
- Available from:
Pinout
- J6 Pinout
Assembly
Here is what the header will look like when soldered to J6 of the Pandaboard.
- Solder the header into the J6 pins closest to the WIFI module
- Detail of the header soldered into J6
- Detail of switch plugged into pins 12 and 8 of j6
- Another way to add the switch is just solder it to pins 12 and 8.
Notes
- First few pins of J6
