Panda How to kernel 2 6 39
The merge window has closed and 2.6.39-rc1 has been released, There are many Pandaboard related changes, including HDMI, DVI and wl21xx support.
As of -rc1: * hdmi & dvi are broken due to some dss clocking issues, see: https://patchwork.kernel.org/patch/674062/ for details, a fix for dvi is available, see below. * abe sound is not supported. * Dave Anders patch to not configure the unused power regulators of VUSIM and VAUX1 is included. * wl12xx support is working to the extent that one can associate with an access point, get an IP address and ping out to the internet.
As of -rc2 * Neither OMAP nor PandaBoaqrd changes, no other changes to wlan, dvi or hdmi code, so stay tuned for rc-3 in about a week or so. ** looks like lots of interesting changes queued up for the next -rc so stay tuned..
As of -rc3 * Rebooting is broken (there was a post suggesting that it was broken in -rc2 as well) follow this thread for more info: http://www.spinics.net/lists/linux-omap/msg49746.html. ** a simple fix is to turn off OMAP2 support, which is done in the .config below for -rc3. * What at first looked like interesting changes to /arch/arm/mach-omap2/ /drivers/net/wireless/wl12xx/ /drivers/video/omap2/dss/ seemed to really be typo fixes in comments, Hopefully, some real fixes will be in -rc3. * New in -rc3 is that the usb ethernet adapter appears as eth0 rather than usb0.
As of -rc4 * Neither OMAP nor PandaBoaqrd changes, no other changes to wlan, dvi or hdmi code, so stay tuned for rc-5 in about a week or so.
As of -rc5 * Neither OMAP nor PandaBoaqrd changes, no other changes to wlan, dvi or hdmi code, * There have been lots of changes in other parts of the kernel, so it's time to see if anything in -rc5 breaks pandaboard. * Rebooting is still broken, so beware of using omap2plus_defconfig without changes. (see -rc3 above) * patching is still neccessary to get dvi working * wlan and ethernet both seem to work as in -rc3
The proper firmware for wl12xx support is available from: git://git.kernel.org/pub/scm/linux/kernel/git/romieu/linux-firmware.git, just clone that repository and copy the ti-connectivity directory to /lib/firmare/.
# pwd /lib/firmware/ti-connectivity # ls -la total 796 drwxr-xr-x 2 default default 1024 Mar 29 2011 . drwxr-xr-x 4 root root 1024 Mar 29 2011 .. -rw-r--r-- 1 default default 273040 Mar 29 2011 wl1271-fw-2.bin -rw-r--r-- 1 default default 262356 Mar 29 2011 wl1271-fw-ap.bin -rw-r--r-- 1 default default 271832 Mar 29 2011 wl1271-fw.bin -rw-r--r-- 1 default default 912 Mar 29 2011 wl1271-nvs.bin
Building 2.6.39-rc1, -rc3, or -rc5 is basically the same as How to build 2.6.38 kernel, but of course you need the rc1/3/5 sources. The omap2plus_defconfig works, but does not enable anything interesting. config.2.6.39-rc1 enables USB, its' ethernet adapter, and wl12xx support. Or config.2.6.39-rc3.1 for -rc3. config.2.6.39-rc1.2 enables USB, it's ethernet adapter, wl12xx support, and dvi support, for -rc3 use config.2.6.39-rc3.3 and config.2.6.39-rc5.1 for -rc5. However using either of those configs requires that the kernel sources be patched with 0001-omap4-pandaboard-fix-dvi-support.patch The patch also provices panda_dvi_defconfig which just enables dvi. This patch applies to both -rc1, -rc3 and -rc5.
Apply it like so: (from inside the kernel sources directory)
patch -p1 < 0001-omap4-pandaboard-fix-dvi-support.patch
Then use either of the above configs or
make ARCH=arm omap2plus_defconfig or make ARCH=arm panda_dvi_defconfig
Then compile with
make ARCH=arm CROSS_COMPILE=Path_to_your/arm-2009q3/bin/arm-none-linux-gnueabi- uImage or make ARCH=arm CROSS_COMPILE=Path_to_your/arm-2010q1/bin/arm-none-linux-gnueabi- uImage
NOTE: i2c character device driver support from user space is broken for OMAP44xx. a quick fix patch is File:Omap44xx-i2c-fix.patch
After booting run fbtest to see a nice test pattern from the dvi port.
More to come "real soon now"(tm)