Parallel RC Scripts

From eLinux.org
Revision as of 13:49, 13 December 2006 by Wmat (talk | contribs) (Legacy Content Conversion)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Description

One way to reduce bootup time is to run RC scripts in parallel. RC scripts are normally run in sequence in a desktop configuration of Linux. By running the scripts in parallel, it is possible to take advantage of the multi-processing capabilities of the OS (such as overlapping execution with I/O, etc.)

How to implement or use

See the projects listed below for details on different methods of doing this.

Expected Improvement

[Not determined yet.]

Resources

Projects

  • InitNG: a new replacement for SysV init. Boots your system much faster by running as much as possible asynchronously. See InitNG
  • IBM article on on using Makefile techniques to express dependencies between services

and support parallel service start. See BootFaster

  • Richard Gooch project to rewrite boot script system from scratch. Eliminates lots of

BSD and SYS V-isms, and introduces dependencies. See boot scripts

  • Serel project - for parallelizing service startup. Commands are inserted into RC scripts

to cause needed services to start (based on XML database of dependencies). See fastboot

Specifications

  • LSB specification for comments in RC Scripts which allow parallization. See [1]

Patches

None.

Case Studies

[None yet.]

Case 1

[put information about an actual use of this technique here. A case study should include:]

Hardware:: [hardware description here] Kernel Version:: [kernel version here] Configuration:: [information about the configuration used here] Time without change:: [put that here] Time with change:: [put that here]

[Add any additional notes as you see fit.]

Case 2

Case 3