View source for R-Car/Boards/HAD-Solution-Kit

{{TOC right}}

== Introduction ==
This is the official Wiki for [https://www.renesas.com/en-us/solutions/automotive/adas/solution-kits/had-solution-kit.html Renesas R-Car HAD Solution Kit]. <br>


Refer to [[R-Car/Boards/M3SK |R-Car Starter Kit Pro]] page <br>
Refer to [[R-Car/Boards/H3SK |R-Car Starter Kit Premier]] page <br>

== Where to buy ==
TBD

== HAD Solution Kit Documentation ==
TBD

=== System with LVDS cameras ===
TBD

== Quick Start ==
=== Build BSP images ===
Please follow these instruction to build BSP 2.19 http://elinux.org/R-Car/Boards/Yocto-Gen3-ADAS#Building_the_BSP_for_Renesas_ADAS_boards:

At step 8 use h3ulcb target name <br/>
At step 10 add MACHINE_FEATURES append 'h3ulcb-had'
At step 16 use images for HAD ADAS board.

NOTE: you can refer to http://elinux.org/R-Car/Boards/Yocto-Gen3-ADAS#Build_scripts_examples section and use scripts after adding append from step 10.

=== Build SDK ===
Please follow these instruction to build SDK http://elinux.org/R-Car/Boards/Yocto-Gen3-ADAS#Build_SDK

=== Flashing firmware ===
Please follow these instruction to flashing firmware http://elinux.org/R-Car/Boards/Yocto-Gen3-ADAS#Flashing_firmware (optional step)

=== U-Boot Environment ===

Please follow these instruction to  boot from SD card http://elinux.org/R-Car/Boards/Yocto-Gen3-ADAS#Configure_U-Boot_to_boot_from_SD_card <br/>
For HAD board you must use one of the following dtb files: 
<pre>
Image-es1-r8a7795-h3ulcb-had-alfa.dtb
Image-es1-r8a7795-h3ulcb-had-beta.dtb
Image-r8a7795-h3ulcb-had-alfa.dtb
Image-r8a7795-h3ulcb-had-beta.dtb
</pre>
alfa and beta are Starter Kit slots <br/>

=== ADAS test applications ===
Please follow these instruction to build and use ADAS tests http://elinux.org/R-Car/Boards/Yocto-Gen3-ADAS#ADAS_test_applications