Difference between revisions of "R-Car/Boards/Koelsch"

From eLinux.org
Jump to: navigation, search
(Initial Koelsch page)
 
(Add link to SCIF FIFO test page)
Line 25: Line 25:
 
bootz 41000000 - 40f00000
 
bootz 41000000 - 40f00000
 
</pre>
 
</pre>
 +
 +
 +
== Test procedures ==
 +
 +
* [[Tests:SCIF-FIFO]]: Test SCIF FIFO behavior, using SCIF3, SCIFA5, SCIFB0, and HSCIF1 on expansion I/O connectors

Revision as of 06:07, 26 May 2016

Renesas Koelsch

Introduction

This is the Wiki for the Renesas R-Car M2-W Koelsch board (RTP0RC7791SEB00010S). Refer to the R-Car page for information about Renesas' R-Car SoC family.

Serial Console

Use a micro-USB cable to connect to "Debug Serial 0". Serial settings are 115200 8N1.

Booting Linux

 * Kernel config: shmobile_defconfig
 * Kernel image: arch/arm/boot/zImage
 * DTB: arch/arm/boot/dts/r8a7791-koelsch.dtb

U-Boot boot command:

tftp 41000000 zImage
tftp 40f00000 r8a7791-koelsch.dtb
bootz 41000000 - 40f00000


Test procedures

  • Tests:SCIF-FIFO: Test SCIF FIFO behavior, using SCIF3, SCIFA5, SCIFB0, and HSCIF1 on expansion I/O connectors