Difference between revisions of "R-Car/Boards/Lager"
< R-Car
(Change the kernel image and device tree load addresses to give more room for kernel decompression. This fixes boot failures due to the DTB being overwritten by the decompressed kernel.) |
m (Reduce section levels) |
||
Line 1: | Line 1: | ||
{{TOC right}} | {{TOC right}} | ||
− | + | = Introduction = | |
− | |||
− | |||
This is the Wiki for the Renesas R-Car H2 Lager board (RTP0RC7790SEB00010S). | This is the Wiki for the Renesas R-Car H2 Lager board (RTP0RC7790SEB00010S). | ||
Refer to the [[R-Car]] page for information about Renesas' R-Car SoC family. | Refer to the [[R-Car]] page for information about Renesas' R-Car SoC family. | ||
− | + | = Serial Console = | |
Use a micro-USB cable to connect to "Debug Serial 0". | Use a micro-USB cable to connect to "Debug Serial 0". | ||
Serial settings are 115200 8N1. | Serial settings are 115200 8N1. | ||
− | + | = Booting Linux = | |
* Kernel config: shmobile_defconfig | * Kernel config: shmobile_defconfig |
Latest revision as of 08:30, 10 November 2017
Introduction
This is the Wiki for the Renesas R-Car H2 Lager board (RTP0RC7790SEB00010S). Refer to the R-Car page for information about Renesas' R-Car SoC family.
Serial Console
Use a micro-USB cable to connect to "Debug Serial 0". Serial settings are 115200 8N1.
Booting Linux
* Kernel config: shmobile_defconfig * Kernel image: arch/arm/boot/zImage * DTB: arch/arm/boot/dts/r8a7790-lager.dtb
U-Boot boot command:
tftp 42000000 zImage tftp 41f00000 r8a7790-lager.dtb bootz 42000000 - dtb 41f00000