Difference between revisions of "R-Car/Boards/V3MSK"

From eLinux.org
Jump to: navigation, search
(U-Boot Environment)
(Blanked the page)
Line 1: Line 1:
{{TOC right}}
 
  
== Introduction ==
 
This is the Wiki for the Renesas R-Car V3M Starter Kit board (RTP0RC7797....).
 
Refer to the [[R-Car]] page for information about Renesas' R-Car SoC family.
 
 
== Where to buy ==
 
TBD
 
 
== V3M Starter Kit Board Documentation ==
 
TBD
 
 
=== System with LVDS cameras ===
 
TBD
 
 
== Quick Start ==
 
=== Build BSP images ===
 
Please follow these instruction to build BSP http://elinux.org/R-Car/Boards/Yocto-Gen3-ADAS#Building_the_BSP_for_Renesas_ADAS_boards:
 
 
At step 5,6 - skip these steps <br/>
 
At step 8 - replace this step with following:
 
<pre>
 
cp $WORK/meta-rcar/meta-rcar-gen3-adas/docs/sample/conf/v3msk/linaro-gcc/bsp/*.conf ./conf/
 
</pre>
 
At step 9,10,11 - skip these steps <br/>
 
At step 13 - replace this step with following:
 
<pre>
 
bitbake core-image-minimal
 
</pre>
 
At step 16 use images for V3M Starter Kit board or ULCB Kingfisher board:
 
<pre>
 
Image-r8a7797-v3msk.dtb
 
Image-r8a7797-v3msk-kf.dtb
 
Image-r8a7797-v3msk-kf-v0.dtb
 
Image-r8a7797-v3msk-vbm.dtb
 
</pre>
 
 
NOTE: you can refer to http://elinux.org/R-Car/Boards/Yocto-Gen3-ADAS#Build_scripts_examples section and use scripts after adding append from steps 8,13
 
 
=== Build SDK ===
 
Please follow these instruction to build SDK http://elinux.org/R-Car/Boards/Yocto-Gen3-ADAS#Build_SDK
 
 
=== Flashing firmware ===
 
TBD
 
 
=== U-Boot Environment ===
 
 
Please follow these instruction to  boot from network http://elinux.org/R-Car/Boards/Yocto-Gen3-ADAS#Loading_kernel_via_TFTP_and_rootfs_via_NFS <br/>
 
For V3MSK board you must use one of the following dtb files:
 
<pre>
 
Image-r8a7797-v3msk.dtb
 
Image-r8a7797-v3msk-kf.dtb
 
Image-r8a7797-v3msk-kf-v0.dtb
 
Image-r8a7797-v3msk-vbm.dtb
 
</pre>
 
 
=== ADAS test applications ===
 
TBD
 

Revision as of 01:38, 6 December 2017