This page contains FAQ related with R-Car Gen3 devices.
It includes only open information such as OSS.
about TAG Search
"TAG Search" is search method that extract specific FAQ from all FAQ list.
In the case of search with H3SK tag, FAQ related with H3SK is shown.
- The error message "Error: ethernet@e6800000 address not set." is shown in U-boot.
- Where can I buy the board ?
- Which dtb file is required to boot linux on the R-Car Starter Kit board ?
- How to get the SA001 Camera.
- I can't use usb3.0(CN2) with Kingfisher + R-Car Starter Kit Pro(M3SK).
- What is the recommended GPS antenna?
- Fetcher failure: Unable to find file file://r8a779xx_linux_gsx_binaries_gles.tar.bz2
- Bitbake is stopped with error even if evaluation packages are located correctly.
- Does Starter Kit + Kingfisher support Suspend to RAM(S2R)?
- Is it possible to repair Starter Kit which is broken by connecting 12V power?
- Is there a built binary somewhere?
- How to run the "Suspend to RAM"
- The error message "renesas_sdhi_internal_dmac ee100000.sd: timeout waiting for SD bus idle" is shown on Yocto v4.1.0
- How to use USB camera on Starter Kit.
- Binary for Starter Kit Pro M3v3(ex. xxxxx-2x4g.srec, xxxxx-2x4g.dtb) does not be built.
- Does Yocto v4.1.0 support HS400?
- Can R-Car support a root file system of Ubuntu?
- Where can I buy JTAG connector for R-Car Gen3 Starter Kit?
- How to format eMMC which is equipped on R-Car Gen3 Starter Kit.
- What is the recommended Radio antenna?
- Is there LVDS panel which is recommended to use with Kingfisher?
- How to use CN11 on Kingfisher with Starter Kit Premier(H3SK).
- Can R-Car Gen3 Starter Kit support the Docker?
- How to use multi-display on R-Car Gen3 Starter Kit.
- How to use the CAN on R-Car Gen3 Starter Kit.
- How to use Automotive Grade Linux(AGL) on R-Car Gen3 Starter Kit.
- How to use upstream kernel on R-Car Gen3 Starter Kit.
- How to use Renesas repository's kernel on R-Car Gen3 Starter Kit.
- What is the output resolution of HDMI?
- How to use latest Yocto Project on R-Car Gen3 Starter Kit.
- Which version of Wayland/Weston does R-Car support?
- How to stop/start the CPUs.
- How to use only Cortex A57(Big) core.
- How to use Android on R-Car Gen3 Starter Kit.
- How to use miniPCIe(wifi module) on Kingfisher with R-Car Gen3 Starter Kit.
- How to use M.2 on Kingfisher with R-Car Gen3 Starter Kit.
- How to change kernel config on Yocto.
- How to use multiple camera on Kingfisher.
- How to record an audio on Kingfisher.
- How to flash android images to R-Car Gen3 Starter Kit + Kingfisher on Windows OS.
- How to use Wayland/Weston and Multimedia on Yocto v4.1.0.
- How to change the output resolution of R-Car Gen3 Starter Kit.
- How to change the output resolution of R-Car Gen3 Starter Kit + Kingfisher.
- Kernel panic(SError) after log of "renesas-rpc ee200000.rpc0".
- How to disable weston which runs at startup in yocto.
- Output resolution of weston(GUI) isn't changed in spite of adding "video" paramater to bootargs.
- What is Community Yocto BSP?
- The error message "amixer: Unable to find simple control 'DVC Out',0" is shown in Kingfisher Yocto BSP.
- how to scale up/down the video using vspfilter.
- How to measure SoC temperature.
- Where can I get the GFX/MMP packages of M3N/D3/E3?
- How to change the DDR frequency.
- Where can I get the Open CL library of R-Car Starter Kit?
- How to use "Device Tree Overlays"
- How to use Watchdog timer.
- How to use the SW3 and LED5(6) on R-Car Starter Kit.
- How to load image via network connection over USB-ether adapter on U-boot.
- How to build without proprietary Multimedia and 3D Graphics software.
- Where can I get the R-Car Starter Kit board documentation?
- How to use H.264 encoding.
- The message "waiting for device" is shown in terminal when using fastboot.
- Build process for Android crashes with strange error or segfault (mostly after 95%)
- How to flash separate image of Android.
- How to limit total DDR memory size in Yocto
- How to write files to the read-only partitions on Android
- Which is the H3SK(RTP0RC77951SKBX010SA03) schematic?
- How to build kernel (u-boot, ATF etc) individually
- How to crop the video which is captured by camera
- How to use IPL on hyperflash instead of eMMC
- How to use PVRTune with R-Car Gen3 Starter Kit
- How to get Mini monitor for Starter Kit
- How to use CFS(Completely Fair Scheduling) on R-Car Gen3 Starter Kit?
- The error message "tar (child): R-Car_Gen3_Series_Evaluation_Software_Package_for_Linux-*.tar.gz: Cannot open:" is shown in copy_evaproprietary_softwares.sh.
- The error message "Failed to DRAM initialize (-1)" is shown on IPL(Initial Program Loader) of R-Car Starter Kit Premier
- fastboot.sh script stacks with "< waiting for any device >"
- How to print verbose kernel logs to console on Android BSP
- Can I use loopback of CAN on R-Car Starter Kit with Kingfisher?
- How to get Parameter Sheet of R-Car Gen3 Starter Kit.
- Where can I get the R-Car H3/M3 device documentation?
- Is it possible to build and operate without Renesas Proprietary MMP (+GFX) in the Android BSP for R-Car?
- How to change SELinux to permissive on Android BSP
R-Car Solution Matching System
- What is "R-Car Solution Matching System"?
- How to use R-Car Solution Matching System.
- Are there any Quick/Fast boot solutions which run on R-Car?
- Please introduce partner/company that is R-Car application vendor.
- Are there any partners/companies that can support the development of R-Car solution by chinese company?
- Are there any partners/companies that can support the development of autonomous driving on R-Car?
- Please introduce partner/company that has a Virtualization solution on R-Car.
- Are there any partners/companies that can support the Android or AGL on R-Car?
- How to contact partner/company when the contact address/phone is not written in Solution Matching System