Difference between revisions of "R-Car/Boards/Yocto-Gen3-CommonFAQ/How to change the output resolution of R-Car Gen3 Starter Kit + Kingfisher."

From eLinux.org
Jump to: navigation, search
(Created page with "== How to change the output resolution of R-Car Gen3 Starter Kit + Kingfisher. == === Yocto BSP === ==== microHDMI exmaple ==== Case 1: GUI(Weston)<br> : ex: 1024x768 case: :...")
 
 
Line 8: Line 8:
 
:: <syntaxhighlight lang=text>
 
:: <syntaxhighlight lang=text>
 
[output]
 
[output]
name=HDMI-A-1
+
name=HDMI-A-2
 
mode=1024x768
 
mode=1024x768
 
</syntaxhighlight>
 
</syntaxhighlight>
Line 17: Line 17:
 
:: <syntaxhighlight lang=text>
 
:: <syntaxhighlight lang=text>
 
   => edit bootargs
 
   => edit bootargs
   video=HDMI-A-1:1024x768-32@60
+
   video=HDMI-A-2:1024x768-32@60
 
</syntaxhighlight>
 
</syntaxhighlight>
  

Latest revision as of 19:05, 14 October 2020

How to change the output resolution of R-Car Gen3 Starter Kit + Kingfisher.

Yocto BSP

microHDMI exmaple

Case 1: GUI(Weston)

ex: 1024x768 case:
Add following lines to rootfs/etc/xdg/weston/weston.ini:
[output]
name=HDMI-A-2
mode=1024x768

Case 2: CLI(Kernel)

ex: 1024x768 case:
Add followings line to bootargs in U-boot:
  => edit bootargs
  video=HDMI-A-2:1024x768-32@60

HDMI Connector List:

  • HDMI-A-2: microHDMI port on Starter Kit
  • HDMI-A-1: HDMI port on Kingfisher

LVDS-panel

Please refer to the R-Car/Boards/Kingfisher/Yocto-Gen3#Build_with_LVDS_panel.28CN49.29.

Android BSP

Refer to the R-Car/Boards/Kingfisher/Android/Android_P#Resolution_parameters.


See also: