R-Car/Boards/Yocto-Gen3-CommonFAQ/How to use PVRTune with R-Car Gen3 Starter Kit

From eLinux.org
< R-Car‎ | Boards/Yocto-Gen3-CommonFAQ
Revision as of 18:34, 26 November 2020 by Y.H. (talk | contribs) (Created page with "How to use PVRTune with R-Car Gen3 Starter Kit. Ex.) HostPC is Linux 64-bit: # Download pvrtune. #* https://www.imgtec.com/developers/powervr-sdk-tools/installers/ # Install...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

How to use PVRTune with R-Car Gen3 Starter Kit.

Ex.) HostPC is Linux 64-bit:

  1. Download pvrtune.
  2. Install PVRTune.
    PC$ ./PVRTuneDeveloperSetup-2020_R1.run-x64
    
  3. Copy PVRPerfServerDeveloper to the target filesystem.
    PC$ sudo cp "/opt/Imagination Technologies/PowerVR_Graphics/PowerVR_Tools/PVRTuneDeveloper/PVRPerfServer/Linux_armv8_64/PVRPerfServerDeveloper" -t <target-filesystem>/home/root
    
  4. Run PVRPerfServerDeveloper on targer board.
    root@h3ulcb:~# ./PVRPerfServerDeveloper
    
  5. Run PVRTuneDeveloperGUI on Host PC
    PC$ "/opt/Imagination Technologies/PowerVR_Graphics/PowerVR_Tools/PVRTuneDeveloper/GUI/Linux_x86_64/PVRTuneDeveloperGUI"
    
  6. Input IP address of board into form "Connect to", then click "Connect" button.

See also: