Difference between revisions of "R-Car/Boards/Yocto-Gen3-CommonFAQ/Which dtb file is required to boot linux on the R-Car Starter Kit board ?"
(Add column "v3.21.0 or earlier") |
(→Yocto) |
||
| Line 6: | Line 6: | ||
! v4.1.0 or later | ! v4.1.0 or later | ||
! v3.21.0 or earlier | ! v3.21.0 or earlier | ||
| + | <!-- | ||
|- | |- | ||
| H3SK v1.1 | | H3SK v1.1 | ||
| r8a7795-es1-h3ulcb.dtb | | r8a7795-es1-h3ulcb.dtb | ||
| Image-r8a7795-es1-h3ulcb.dtb | | Image-r8a7795-es1-h3ulcb.dtb | ||
| + | --> | ||
|- | |- | ||
| − | | H3SK v2.0(4GB) | + | | H3SK v2.0(DDR 4GB) |
| r8a7795-h3ulcb.dtb | | r8a7795-h3ulcb.dtb | ||
| Image-r8a7795-h3ulcb.dtb | | Image-r8a7795-h3ulcb.dtb | ||
|- | |- | ||
| − | | H3SK v2.0(8GB)/v3.0 | + | | H3SK v2.0(DDR 8GB)/v3.0(DDR 8GB) |
| r8a7795-h3ulcb-4x2g.dtb | | r8a7795-h3ulcb-4x2g.dtb | ||
| Image-r8a7795-h3ulcb-4x2g.dtb | | Image-r8a7795-h3ulcb-4x2g.dtb | ||
Latest revision as of 16:55, 5 August 2020
Which dtb file is required to boot linux on the R-Car Starter Kit board ?
Yocto
| Board type | v4.1.0 or later | v3.21.0 or earlier |
|---|---|---|
| H3SK v2.0(DDR 4GB) | r8a7795-h3ulcb.dtb | Image-r8a7795-h3ulcb.dtb |
| H3SK v2.0(DDR 8GB)/v3.0(DDR 8GB) | r8a7795-h3ulcb-4x2g.dtb | Image-r8a7795-h3ulcb-4x2g.dtb |
| M3SK v1.0 | r8a7796-m3ulcb.dtb | Image-r8a7796-m3ulcb.dtb |
| M3SK v3.0 | r8a7796-m3ulcb-2x4g.dtb | Image-r8a7796-m3ulcb-2x4g.dtb |
| M3NSK | r8a77965-m3nulcb.dtb | Image-r8a77965-m3nulcb.dtb |
If you use Kingfisher board, it is necessary to add suffix "-kf" to dtb filename.
- ex.) r8a7795-h3ulcb-kf.dtb
Please also refer to R-Car/Boards/Kingfisher/Yocto-Gen3#Running_Yocto_images
