View source for RPi Partial BOM Rev2.0 ModelB

[[Category: RaspberryPi]]

Back to [[RPi_schematics_breakdown]]

= Partial Bill-Of-Materials for a RaspberryPi Revision2.0 Model B =
Another example of the sort of thing you can auto-generate by slicing & dicing the data in my handy [[RPi_schematics_breakdown|CSV files]] - here's a list of all the components (and their quantities) required to assemble a RaspberryPi Model B according to the [[RPi_Hardware#Schematic_.2F_Layout|Rev2.0 schematics]]. This isn't a full BOM as it doesn't include full details, component sizes/specs, all part numbers, etc.<br>
To complete this example, the Python script I used to generate the table below has been uploaded [http://www.andrewscheller.co.uk/create_bom.py here].

{| border=1
! ComponentType !! PartNumber !! Value !! Quantity
|-
! colspan=3 align=left | capacitor !! 91
|-
| capacitor ||  || 1n0 || 2
|-
| capacitor ||  || 10n || 3
|-
| capacitor ||  || 22n || 1
|-
| capacitor ||  || 33n || 2
|-
| capacitor ||  || 100n || 42
|-
| capacitor ||  || 220n || 16
|-
| capacitor ||  || 15p || 4
|-
| capacitor ||  || 27p || 2
|-
| capacitor ||  || 33p || 2
|-
| capacitor ||  || 56p || 1
|-
| capacitor ||  || 100p || 1
|-
| capacitor ||  || 1u0 || 6
|-
| capacitor ||  || 4u7 || 4
|-
| capacitor ||  || 10u || 5
|-
! colspan=3 align=left | capacitor (polarized) !! 4
|-
| capacitor (polarized) ||  || 47u || 3
|-
| capacitor (polarized) ||  || 220uF || 1
|-
! colspan=3 align=left | connector !! 9
|-
| connector || PD-8/095 || 10/100 Ethernet || 1
|-
| connector || PF-15/026 || 15-pin flat flex || 2
|-
| connector || PA-5/013 || 3.5mm audio || 1
|-
| connector || PD-USB/109 || DUAL USB TYPE A || 1
|-
| connector || PD-HDMI/110 || HDMI || 1
|-
| connector || PD-USB/112 || MICRO USB TYPE B || 1
|-
| connector || PA-3/018 || PHONO (RCA) || 1
|-
| connector ||  || SD-CARD || 1
|-
! colspan=3 align=left | crystal !! 2
|-
| crystal ||  || 19M2 || 1
|-
| crystal ||  || 25M0 || 1
|-
! colspan=3 align=left | diode !! 1
|-
| diode || BAT54 ||  || 1
|-
! colspan=3 align=left | diode (light emitting) !! 5
|-
| diode (light emitting) ||  || GRN || 3
|-
| diode (light emitting) ||  || RED || 1
|-
| diode (light emitting) ||  || YEL || 1
|-
! colspan=3 align=left | diode (protection) !! 2
|-
| diode (protection) || Rclamp0524P ||  || 2
|-
! colspan=3 align=left | diode (signal) !! 7
|-
| diode (signal) || BAV99 ||  || 7
|-
! colspan=3 align=left | diode (voltage suppressor) !! 1
|-
| diode (voltage suppressor) || SMBJ || 5V || 1
|-
! colspan=3 align=left | header !! 1
|-
| header || PH-26/004 || User GPIO || 1
|-
! colspan=3 align=left | inductor !! 8
|-
| inductor || LQM2HP_G0 || 1U0 || 1
|-
| inductor || BLM15AG601 ||  || 3
|-
| inductor || BLM18AG121 ||  || 2
|-
| inductor || BLM18AG601 ||  || 2
|-
! colspan=3 align=left | integrated circuit !! 4
|-
| integrated circuit || BCM2835 || CPU & GPU || 1
|-
| integrated circuit || NC7WZ17 || Dual Buffer || 1
|-
| integrated circuit || LAN9512 || LAN & USB || 1
|-
| integrated circuit || K4P4G324EB || RAM || 1
|-
! colspan=3 align=left | polyfuse !! 1
|-
| polyfuse || miniSMD || 1A1 6V || 1
|-
! colspan=3 align=left | regulator !! 3
|-
| regulator || NCP1117-1v8 || 1v8 || 1
|-
| regulator || LP2980-2v5 || 2v5 || 1
|-
| regulator || NCP1117-3v3 || 3v3 || 1
|-
! colspan=3 align=left | resistor !! 39
|-
| resistor ||  || 0R0 || 1
|-
| resistor ||  || 10R || 1
|-
| resistor ||  || 15R || 1
|-
| resistor ||  || 33R || 6
|-
| resistor ||  || 49R9 || 4
|-
| resistor ||  || 150R || 2
|-
| resistor ||  || 240R || 1
|-
| resistor ||  || 270R || 2
|-
| resistor ||  || 1K0 || 5
|-
| resistor ||  || 1K6 || 2
|-
| resistor ||  || 1K8 || 4
|-
| resistor ||  || 3K9 || 1
|-
| resistor ||  || 8K2 || 1
|-
| resistor ||  || 10K || 3
|-
| resistor ||  || 12K || 1
|-
| resistor ||  || 12K4 || 1
|-
| resistor ||  || 47K || 2
|-
| resistor ||  || 1M0 || 1
|-
! colspan=3 align=left | Total !! 178
|}