RPi Peripherals

From eLinux.org
Revision as of 02:02, 17 April 2012 by Linker3000 (talk | contribs) (Created page with "=Setup examples for various peripherals= ===Wireless: TP-Link TL-WN722N USB wireless adaptor (Debian 6)=== This will serve as a general guide for USB wireless devices but may n...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Setup examples for various peripherals

Wireless: TP-Link TL-WN722N USB wireless adaptor (Debian 6)

This will serve as a general guide for USB wireless devices but may need modifying for your specific one.

Edit /etc/apt/sources.list to add the non-free archive and backports:

 deb http://ftp.us.debian.org/debian/ squeeze main non-free
 deb http://security.debian.org/ squeeze/updates main non-free
 deb http://ftp.us.debian.org/debian/ squeeze-updates main non-free
 deb http://backports.debian.org/debian-backports squeeze-backports main non-free

Update tha package cache:

 apt-get update

Download the required firmware and put it in the correct location - you may not need to do this for your adaptor.

 wget http://linuxwireless.org/download/htc_fw/1.3/htc_9271.fw
 cp htc_9271.fw /lib/firmware

Plug in adaptor

Confirm adaptor is present:

 root@raspberrypi:~# iwconfig
  lo        no wireless extensions.

  eth0      no wireless extensions.

  wlan0     IEEE 802.11bgn  ESSID:off/any
            Mode:Managed  Access Point: Not-Associated   Tx-Power=20 dBm
            Retry  long limit:7   RTS thr:off   Fragment thr:off
            Encryption key:off
            Power Management:off

If no wlanx device is shown, you might need to download firmware for your USB wifi device (or track down other compatible drivers if they are available). To confirm this, check the dmesg output when you plug in your adaptor - typing dmesg at the command prompt may be sufficient - and look for information related to your adaptor - the example dmesg output below shows what is seen in the event of the TP-Link firmware not being present - notice that the name of the required firmware file is given (htc_9271.fw), the driver name (ath9k_htc) and an error -22 message:

  usb 1- ath9k_htc: Firmware - htc_9271.fw not found
  ath9k_htc: probe of 1- failed with error -22
  usbcore: registered new interface driver ath9k_htc

Armed with this information, try a web search for the name of the driver or driver file and/or head over to http://linuxwireless.org