Difference between revisions of "RPi SD cards"

From eLinux.org
Jump to: navigation, search
(Working / Non-working SD cards: insert Samsung MB-MS04D)
(Added Greenliant Industrial card performace.)
(252 intermediate revisions by more than 100 users not shown)
Line 8: Line 8:
  
 
One advantage to using an SD card like this is that you can have several SD cards, each with a different operating system, or a different purpose. Simply power off, switch cards, and reconnect the power. You have a different computer to play with.
 
One advantage to using an SD card like this is that you can have several SD cards, each with a different operating system, or a different purpose. Simply power off, switch cards, and reconnect the power. You have a different computer to play with.
 +
 +
Please bear in mind that the maximum throughput of the card reader of the Raspberry Pi is 25 MB/s and that most likely read and write speed won't exceed 22 MB/s.
  
 
=== Which SD card? ===
 
=== Which SD card? ===
Line 13: Line 15:
 
[[File:SD_Card_dimensions.png‎|right|frameless|SD card sizes]]
 
[[File:SD_Card_dimensions.png‎|right|frameless|SD card sizes]]
  
SD cards come in three physical sizes (see picture). The Raspberry Pi A and B use the largest one; the miniSD card and the MicroSD card can be used in those models, but you will need an adapter / holder to fit it. The Raspberry Pi B+ requires the smallest one, the MicroSD.
+
SD cards come in three physical sizes (see picture). The Raspberry Pi A and B use the largest one; the miniSD card and the MicroSD card can be used in those models, but you will need an adapter / holder to fit it. The Raspberry Pi B+ and Raspberry Pi 2 Model B (second generation) require the smallest one, the MicroSD.
  
 
SD cards come in a range of storage sizes. You will likely need more than 2 GB.
 
SD cards come in a range of storage sizes. You will likely need more than 2 GB.
Line 47: Line 49:
 
* the Raspberry Pi can suffer from performance problems if peripherals are drawing too much power from the power supply; one of the consequences is errors from the SD card
 
* the Raspberry Pi can suffer from performance problems if peripherals are drawing too much power from the power supply; one of the consequences is errors from the SD card
 
* unless using a preinstalled card, users have to copy a distribution image to the SD card. This might be considered more technical than the user has previously experienced, resulting in a faulty SD card
 
* unless using a preinstalled card, users have to copy a distribution image to the SD card. This might be considered more technical than the user has previously experienced, resulting in a faulty SD card
* there are many cheap Chinese copies of (brand name) SD-Cards on the market, in addition they are often mislabelled as having greater capacity than they really have, see [http://www.petapixel.com/2011/05/20/one-third-of-the-sandisk-memory-cards-on-earth-are-counterfeit SanDisk counterfeit cards]
+
* there are many cheap copies of brand name SD cards on the market, in addition they are often mislabelled as having greater capacity than they really have, see [http://www.petapixel.com/2011/05/20/one-third-of-the-sandisk-memory-cards-on-earth-are-counterfeit SanDisk counterfeit cards]
  
 
... and of course, they may be faulty!
 
... and of course, they may be faulty!
Line 68: Line 70:
  
 
{| class="wikitable sortable"
 
{| class="wikitable sortable"
! OK !! Manufacturer !! Type !! Size (GB) !! Class !! Model !! Info !! Logged by
+
! data-sort-type="text" scope="col" |
 +
! data-sort-type="text" scope="col" | Manufacturer
 +
! data-sort-type="text" scope="col" | Type
 +
! data-sort-type="number" scope="col" | Size
 +
! data-sort-type="number" scope="col" | Class
 +
! class="unsortable" scope="col" | Part Number
 +
! class="unsortable" scope="col" | Description
 +
! class="unsortable" scope="col" | Added
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
Line 195: Line 204:
 
|MicroSD w/ adapter
 
|MicroSD w/ adapter
 
|0xAF 12 Jun 2012
 
|0xAF 12 Jun 2012
 +
|-
 +
|style='background-color:#c00;'| nok
 +
|AEGO
 +
|microSDHC
 +
|16
 +
|10
 +
|MMAGR16GUDCA-T0
 +
|File system read error
 +
|Randomeizer 22 Mar 2018
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
Line 231: Line 249:
 
|man:0x00001d oem:0x4144 name:SD    hwrev:0x0 fwrev:0x2    Raspberry Pi B+    2014-12-24-wheezy-raspbian
 
|man:0x00001d oem:0x4144 name:SD    hwrev:0x0 fwrev:0x2    Raspberry Pi B+    2014-12-24-wheezy-raspbian
 
|c 21 Jan 2015
 
|c 21 Jan 2015
 +
|-
 +
|style='background-color:#c00;'| nok
 +
|Adata
 +
|microSDHC
 +
|16
 +
|10
 +
|AUSDH16GUICL10-RA1
 +
|Raspberry Pi 2 B    2015-02-02-wheezy-raspbian
 +
|c 13 Feb 2015
 +
|-
 +
|style='background-color:#0a0;'| ok
 +
|Adata
 +
|microSDHC
 +
|16
 +
|10
 +
|AUSDH16GUICL10-RA1
 +
|Raspberry Pi 2 B    2015-01-30-wheezy-raspbian: note: OK after running update!!
 +
|johnty 2 Mar 2015
 +
|-
 +
|style='background-color:#0a0;'| ok
 +
|Adata
 +
|microSDHC
 +
|16
 +
|10
 +
|AUSDH16GUICL10-RA1
 +
|Raspberry Pi B    2015-01-30-wheezy-raspbian
 +
|johnty 2 Mar 2015
 +
|-
 +
|style='background-color:#0a0;'| ok
 +
|Adata
 +
|microSDHC
 +
|16
 +
|10
 +
|AUSDH16GUICL10-RA1
 +
|Raspberry Pi B+    2015-01-30-wheezy-raspbian
 +
|johnty 2 Mar 2015
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
Line 303: Line 357:
 
|
 
|
 
|Lrosengreen 16 Aug 2012
 
|Lrosengreen 16 Aug 2012
 +
|-
 +
|style='background-color:#a00;'| nok
 +
|Ansonchina
 +
|microSDHC
 +
|8
 +
|10
 +
|EVO
 +
|Card from Aliexpress, doesn't boot, tested on RPi B rev 2.0
 +
|Astarta 2015-10-31
 +
|-
 +
|style='background-color:#a00;'| nok
 +
|Ansonchina
 +
|microSDHC
 +
|32
 +
|10
 +
|EVO
 +
|Card from Aliexpress, Tested on RPi B+
 +
|Kimvais 2015-02-26
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
Line 316: Line 388:
 
|Apacer
 
|Apacer
 
|SDHC
 
|SDHC
|16
+
|32
 +
|10
 +
|AP32GMCSH10U1-R
 +
|NOOBS image will not extract on PI 2 (1G), but extracted ok on PI (512) version
 +
|PaulK 6 Aug 2015
 +
|-
 +
|style='background-color:#c00;'| nok
 +
|Apacer
 +
|SDHC
 +
|16
 
|10
 
|10
 
|AP16GSDHC10
 
|AP16GSDHC10
Line 330: Line 411:
 
|with adapter
 
|with adapter
 
|Jasen 8 Jun 2012
 
|Jasen 8 Jun 2012
 +
|-
 +
|style='background-color:#0a0;'| ok
 +
|blackweb
 +
|microSDHC
 +
|16
 +
|10
 +
|EKSDM16GCGBW
 +
|[man:0x00009f oem:0x5449 name:N/A hwrev:0x1 fwrev:0x0]
 +
|Peppernrino 9 Mar 2020
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
Line 348: Line 438:
 
|
 
|
 
|Uberfoo 23 Jul 2012
 
|Uberfoo 23 Jul 2012
 +
|-
 +
|style='background-color:#0a0;'| ok
 +
|Centon
 +
|MicroSDHC
 +
|32
 +
|10
 +
|
 +
|Raspberry Pi 2 Model B
 +
|Riverstyxxx 7 Feb 2015
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
Line 519: Line 618:
 
|Both Raspmc and OpenElec tries to boot, but throws lots of errors
 
|Both Raspmc and OpenElec tries to boot, but throws lots of errors
 
|vygandas 12 June 2013
 
|vygandas 12 June 2013
 +
|-
 +
|style='background-color:#0a0;'| ok
 +
|Emtec
 +
|SDHC
 +
|32
 +
|10
 +
|ECMSDM2GHC10
 +
|2015-11-21-raspbian-jessie
 +
|02 february 2016
 +
|-
 +
|style='background-color:#0a0;'| ok
 +
|Emtec
 +
|SDHC
 +
|32
 +
|10
 +
|16.04_ECMMDM32GHC10
 +
|man:0x000027 oem:0x5048 name:SD32G hwrev:0x3 fwrev:0x0 Jessie on RasPi3
 +
|14 april 2016
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
Line 575: Line 692:
 
|-
 
|-
 
|style='background-color:#c00;'| nok
 
|style='background-color:#c00;'| nok
|Goodram
+
|Flexon
|SDHC
+
|microSDHC
|8
+
|16
 
|10
 
|10
| SDC8GHC10PGRR9
+
|FDMM016G-CA0
|
+
|Work, but may corrupt with use (~10% of cards). <br />
|MPastuszko 17 July 2014
+
Raspberry Pi 3 B <br />
 +
Linux raspberry 4.14.79-v7+ #1159 SMP Sun Nov 4 17:50:20 GMT 2018 armv7l GNU/Linux <br />
 +
man:0x000027 oem:0x5048 name:SD16G hwrev:0x6 fwrev:0x0
 +
|dhbmarcos 18 Jan 2021
 
|-
 
|-
|style='background-color:#0a0;'| ok
+
|style='background-color:#c00;'| nok
|Goodram
+
|Generic/unbranded
 
|microSDHC
 
|microSDHC
|8
+
|64
 +
|10
 +
|CRCGS08GHBRT-JCCBFEA 151106 OJ
 +
|won't boot RP2-B
 +
|Urraca 30 Nov 2015
 +
|-
 +
|style='background-color:#c00;'| nok
 +
|Generic/unbranded
 +
|microSDHC
 +
|8
 +
|2
 +
|0305043790JC
 +
|won't boot RP-B+
 +
|dweggg 12 Jun 2017
 +
|-
 +
|style='background-color:#0a0;'| ok
 +
|GIGS
 +
|microSDHC
 +
|8
 +
|4
 +
|MMCTR08G3ACH-NJ K E53083PS 328
 +
|Works / Boot OK using NOOBS in a RaspPi 3 B and RaspPi Zero W
 +
|GST iGus 31 May 2018
 +
|-
 +
|style='background-color:#c00;'| nok
 +
|Goodram
 +
|SDHC
 +
|8
 +
|10
 +
| SDC8GHC10PGRR9
 +
|
 +
|MPastuszko 17 July 2014
 +
|-
 +
|style='background-color:#0a0;'| ok
 +
|Goodram
 +
|microSDHC
 +
|8
 
|4
 
|4
 
|
 
|
Line 609: Line 765:
 
|
 
|
 
|Druss 5 Aug 2012
 
|Druss 5 Aug 2012
 +
|-
 +
|style='background-color:#0a0;'| ok
 +
|Greenliant
 +
|SDHC
 +
|16
 +
|10
 +
|GLS93MP016G1-I-BZ801
 +
|Industrial Temp SD / microSD ArmourDrive EX Series<br/>
 +
Raspberry Pi 3 B+<br/>
 +
Linux raspberrypi 4.14.79-v7+ #1159 SMP Sun Nov 4 17:50:20 GMT 2018 armv7l GNU/Linux<br/>
 +
man:0x000001 oem:0x5041 name:GOL01 hwrev:0x6 fwrev:0x0
 +
|dhbmarcos 31 Mar 2021
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
Line 627: Line 795:
 
|
 
|
 
|Flatline403 12 May 2012
 
|Flatline403 12 May 2012
 +
|-
 +
|style='background-color:#0a0;'| ok
 +
|GSkill
 +
|microSDHC
 +
|32
 +
|10
 +
|FF-TSDG32GA-C10
 +
|Raspberry Pi 2 B
 +
|Turaiel 7 Apr 2015
 +
|-
 +
|style='background-color:#0a0;'| ok
 +
|GSkill
 +
|microSDXC (1)
 +
|64
 +
|10
 +
|
 +
|Raspberry Pi v1 B+ w/ RetroPIE v3.0
 +
|Zev 6 Sept 2015
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
Line 970: Line 1,156:
 
|4
 
|4
 
|SD4/4GB SD-K04G
 
|SD4/4GB SD-K04G
|One or two worked perfectly, but most of them showed filesystem corruption after some months, usually (but not only) after power loss. Read-only filesystem didn't fix the issue. Tested on 20 SD card on 15 different Raspberry Pi model B.
+
|One or two worked perfectly, but most of them showed filesystem corruption after some months, usually (but not only) after power loss. Read-only filesystem didn't fix the issue. Tested on 20 SD cards on 15 different Raspberry Pi model B.
 +
25-02-2015 update: I found that all the broken SD cards were made in Taiwan. The only one made in Japan is still working (from 19/04/2012).
 
|Gabriele Martino 23 Dec 2014
 
|Gabriele Martino 23 Dec 2014
 
|-
 
|-
Line 1,018: Line 1,205:
 
|Jamsta 5 Jun 2012
 
|Jamsta 5 Jun 2012
 
|-
 
|-
|style='background-color:#0a0;'| ok
+
|style='background-color:#c00;'| nok
 
|Kingston
 
|Kingston
 
|SDHC
 
|SDHC
Line 1,024: Line 1,211:
 
|10
 
|10
 
|SD10G2/8GB ultimateX 100X, SD10V/8GB ultimateX 120X
 
|SD10G2/8GB ultimateX 100X, SD10V/8GB ultimateX 120X
|
+
|ok<br>ok<br>man:0x000041 oem:0x3432 name:SD8GB hwrev:0x3 fwrev:0x0 does not work with ArmPI, almost immediate FS corruption.
|ShiftPlusOne 24 Apr 2012, Stevepdp 13 May 2012
+
|ShiftPlusOne 24 Apr 2012<br>Stevepdp 13 May 2012<br>cmouse 28 Sep 2015
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
Line 1,107: Line 1,294:
 
|mmc0: Timeout waiting for hardware interrupt
 
|mmc0: Timeout waiting for hardware interrupt
 
|Kimmoli 27 Jan 2013
 
|Kimmoli 27 Jan 2013
 +
|-
 +
|style='background-color:#c00;'| nok
 +
|Kingston
 +
|SDHC
 +
|16
 +
|10
 +
|SDC10G2/16GB
 +
|Doesn't work with Raspbian Jessie, weird random issues when making any changes to file system.
 +
|Ajeshbltgas 29 Oct 2015
 
|-
 
|-
 
|style='background-color:#c00;'| nok
 
|style='background-color:#c00;'| nok
Line 1,134: Line 1,330:
 
|not booting. no hdmi output. red leds on solid, green leds very lightly dimmed, no green flash/blink
 
|not booting. no hdmi output. red leds on solid, green leds very lightly dimmed, no green flash/blink
 
|smerz 20131230
 
|smerz 20131230
 +
|-
 +
|style='background-color:#c00;'| nok
 +
|Kingston
 +
|SDHC
 +
|16
 +
|10
 +
|SDCA10/16GB <br/>(N0575-002.AD1LF (Taiwan))
 +
|Boot ok I/O errors on intensive use (like upgrade / package installation), Raspberry PI 3, raspbian jessie (man:0x000041 oem:0x3432 name:SD16G hwrev:0x3 fwrev:0x0)
 +
|olli 20160420
 +
|-
 +
|style='background-color:#c00;'| nok
 +
|Kingston
 +
|SDHC
 +
|16
 +
|10
 +
|SDCA10/16GB <br/>(N0575-002.A01LF (Taiwan))
 +
|Boot ok I/O errors on intensive use (like upgrade / package installation), Raspberry PI 3, raspbian jessie
 +
|xytzLP 20160507
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
Line 1,161: Line 1,375:
 
|
 
|
 
|Bromont 25 Nov 2012
 
|Bromont 25 Nov 2012
 +
|-
 +
|style='background-color:#0a0;'| ok
 +
|Kingston
 +
|SDXC
 +
|64
 +
|10
 +
|SDCX10/64GB
 +
|2015-02-16-raspbian (a bit slow)
 +
|map7 02/03/2015
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
Line 1,170: Line 1,393:
 
|
 
|
 
|Plnt 10 Jul 2013
 
|Plnt 10 Jul 2013
 +
|-
 +
|style='background-color:#0a0;'| ok
 +
|Kingston
 +
|microSDXC
 +
|64
 +
|10
 +
|SDCA10/64GB
 +
|Tested on RasPi 3 Model B - running Fedora 26
 +
|R. Opalka 29 Aug 2017
 +
|-
 +
|style='background-color:#0a0;'| ok
 +
|Kingston
 +
|microSDXC
 +
|64
 +
|10
 +
|SDCG2/64GBSP
 +
|Tested on RasPi 3 Model B+ with Stretch.  I followed the instructions (https://www.raspberrypi.org/documentation/installation/sdxc_formatting.md) to reformat the card to FAT32 before writing the image to it.  No problems.
 +
|S. Woolrich, 12 July 2018
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
Line 1,206: Line 1,447:
 
|
 
|
 
|Bredman 16 May 2012
 
|Bredman 16 May 2012
 +
|-
 +
|style='background-color:#0a0;'| ok
 +
|Kingston
 +
|microSDHC
 +
|4
 +
|4
 +
|SDC4/4GB (CO4G)
 +
|Works great with Kingston SD adapter - Boot OK using NOOBS in a Raspi B+
 +
|Horgrim 03 Mar 2015, Javimarrero 26 Sep 2015
 
|-
 
|-
 
|style='background-color:#c00;'| ok
 
|style='background-color:#c00;'| ok
Line 1,219: Line 1,469:
 
|Kingston
 
|Kingston
 
|microSDHC
 
|microSDHC
|8
 
 
|4
 
|4
|SDC4/8GB
+
|4
|Does not work with NOOBS (do not recognize it) or applying an image of Debian or Fedora on it (Kernel panic ... cannot mount fs)
+
|SDC4/4GBCR
|Lilt 9 May 2012 * ElPadre 15 April 2014
+
|Random system crash after 1-2 weeks. Cannot be used from USB. Tested: wheezy, jassie
 +
|kapelan 7 Nov 2015
 
|-
 
|-
 
|style='background-color:#c00;'| nok
 
|style='background-color:#c00;'| nok
Line 1,229: Line 1,479:
 
|microSDHC
 
|microSDHC
 
|8
 
|8
|10
+
|4
|SDC10/8GB
+
|SDC4/8GB
|Work on Raspian, '''but doesn't work with NOOB'''. [Suggestion : download full image of O.S. and put it into SD card directly.]
+
|Does not work with NOOBS (do not recognize it) or applying an image of Debian or Fedora on it (Kernel panic ... cannot mount fs), WORKS with RPi 2 Model B, Openelec 5.0.8.
'''Works with NOOBS'''
+
|Lilt 9 May 2012 * ElPadre 15 April 2014
<br>Sometimes I/O errors and: mmc0: timeout waiting for hardware interrupt
 
<br>'''Does not work in RPi Model B+ with RaspBMC'''. Starts booting but all writes fail.
 
<br>'''NOOBS works fine''', installed Arch and Raspbian successfully.
 
|webserfer 03 March 2013 submarine 03 Jan 2014 diogobackup 23 Jan 2014 felon 20 July
 
javierrgz 3 Sep 2014
 
<br>
 
tinkergnome 24 Oct 2014
 
 
|-
 
|-
 
|style='background-color:#c00;'| nok
 
|style='background-color:#c00;'| nok
Line 1,250: Line 1,493:
 
|Rmoser 16 June 2014
 
|Rmoser 16 June 2014
 
|-
 
|-
 +
 +
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
 
|Kingston
 
|Kingston
Line 1,255: Line 1,500:
 
|16
 
|16
 
|10
 
|10
|SDCA10/16GB (SD16G)
+
|SDCA3/16GB
|2014-09-09-wheezy-raspbian.img, man:0x000003 oem:0x5344 name:SD16G hwrev:0x8 fwrev:0x0
+
|Linux raspberrypi 3.18.7-v7+ #755 SMP PREEMPT Raspberry Pi 2
|bcraun 5 Dec 2014
+
|Sun_Blood 1 April 2015
|-
 
|style='background-color:#0a0;'| ok
 
|Kingston
 
|microSDHC
 
|16
 
|10
 
|SDC10/16GB
 
|Doesn't work with N0390-002.A00LF though (tested with Raspbian “wheezy”) - mmc0 timeouts, waiting for hw int. I wouldn't recommend buying this card. N0460-002.A00LF: Does not boot / io error from dmesg with os running from usb.
 
|Arrow 14 Jun 2012, J3rGuS 19 March 2013, Jettis 5 Sep 2013
 
 
|-
 
|-
|style='background-color:#0a0;'| ok
+
 
 +
 
 +
|style='background-color:#c00;'| nok
 
|Kingston
 
|Kingston
 
|microSDHC
 
|microSDHC
Line 1,274: Line 1,512:
 
|4
 
|4
 
|SDC4/32GB (C32G)
 
|SDC4/32GB (C32G)
|
+
|mmc0: Problem switching card into high-speed mode! in kern.log
|ow3n 8 Oct 2013
+
|ow3n 8 Oct 2013, vdegrandpre 15 Dec 2016
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
 
|Kingston
 
|Kingston
 
|microSDHC
 
|microSDHC
|32
+
|4
 
|10
 
|10
|SDC10/32GB
+
|SDC10/4GB
|Tested with Raspbian wheezy on RPI B+, no problem so far.
+
|man:0x000041 oem:0x3432 name:SD4GB hwrev:0x3 fwrev:0x0 Works on Raspian 2014-12-24 with RPi Model B+, Works on Openelec 5.0.8 with RPi 2 model B.
|Julien Bonnier 30 Sept 2014
+
|c 22 Jan 2015
 
|-
 
|-
|style='background-color:#0a0;'| ok
+
|style='background-color:#c00;'| nok
 
|Kingston
 
|Kingston
 
|microSDHC
 
|microSDHC
|32
+
|8
 
|10
 
|10
|SDC29/32GB
+
|SDC10/8GB
|tried it with retropie raspian 7.5 so far no problems
+
|Work on Raspian, '''but doesn't work with NOOB'''. [Suggestion : download full image of O.S. and put it into SD card directly.]
|Guido(dakiluxa) 27 Fun 2014
+
'''Works with NOOBS'''
 +
<br>Sometimes I/O errors and: mmc0: timeout waiting for hardware interrupt
 +
<br>'''Does not work in RPi Model B+ with RaspBMC'''. Starts booting but all writes fail.
 +
<br>'''NOOBS works fine''', installed Arch and Raspbian successfully.
 +
<br>
 +
|webserfer 03 March 2013 submarine 03 Jan 2014 diogobackup 23 Jan 2014 felon 20 July
 +
javierrgz 3 Sep 2014
 +
tinkergnome 24 Oct 2014
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Kodak
+
|Kingston
|SDHC
+
|microSDHC
|4
+
|16
|2
+
|10
|
+
|SDCA10/16GB (SD16G)
|
+
|2014-09-09-wheezy-raspbian.img, man:0x000003 oem:0x5344 name:SD16G hwrev:0x8 fwrev:0x0
|Semtex 21 May 2012
+
|bcraun 5 Dec 2014
 +
|-
 +
|style='background-color:#c00;'| nok
 +
|Kingston
 +
|microSDHC
 +
|16
 +
|10
 +
|SDC10/16GB
 +
|Doesn't work with N0390-002.A00LF though (tested with Raspbian “wheezy”) - mmc0 timeouts, waiting for hw int. I wouldn't recommend buying this card. N0460-002.A00LF: Does not boot / io error from dmesg with os running from usb. 31488-007.A00LF Boots 2 or 3 times, then mmc0 timeouts and errors (Raspbian "wheezy" in a RPI 2 Model B). - Doesn't boot with NOOBS, the red and green led doesn't blink, are kept lit (RPI 1 Model B+).
 +
|Arrow 14 Jun 2012, J3rGuS 19 March 2013, Jettis 5 Sep 2013, Alex2603 12 Jun 2015, Javimarrero 26 Sep 2015
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Kodak
+
|Kingston
|SDHC
+
|microSDHC
|8
+
|16
|4
+
|10
|
+
|SDC10G2/16GB
|
+
|Works. Tested with Raspbian Jessie on RPi B (installation via raspbian-ua-netinst v1.0.7).
|Britaniola 22 Apr 2012
+
man:0x000041 oem:0x3432 name:SD16G hwrev:0x3 fwrev:0x0
 +
|comixf1 14 Nov 2015
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Kruidvat (Dutch dept. store)
+
|Kingston
 +
|microSDHC
 +
|32
 +
|10
 +
|SDC10/32GB
 +
|Tested with Raspbian wheezy on RPI B+, no problem so far.
 +
|Julien Bonnier 30 Sept 2014
 +
|-
 +
|style='background-color:#0a0;'| ok
 +
|Kingston
 +
|microSDHC
 +
|32
 +
|10
 +
|SDCAC/32GB
 +
|tried it with retropie 3.8.1 so far no problems
 +
|gnick666 03 Aug 2016
 +
|-
 +
|style='background-color:#0a0;'| ok
 +
|Kingston
 +
|microSDHC
 +
|32
 +
|10
 +
|SDC29/32GB
 +
|tried it with retropie raspian 7.5 so far no problems
 +
|Guido(dakiluxa) 27 Fun 2014
 +
|-
 +
 
 +
|style='background-color:#0a0;'| ok
 +
|Kingston
 +
|microSDHC
 +
|32
 +
|10
 +
|SDCG/32GBCR UHS-I U3
 +
|Raspberry Pi 3 B 1.2, no problems with Raspbian, OSMC, Lakka
 +
|@ETasse 14 May 2017
 +
|-
 +
|style='background-color:#0a0;'| ok
 +
|Kodak
 
|SDHC
 
|SDHC
|8
 
 
|4
 
|4
 +
|2
 
|
 
|
 
|
 
|
|Boeboe 18 May 2012
+
|Semtex 21 May 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Kruidvat (Dutch dept. store)
+
|Kodak
 
|SDHC
 
|SDHC
 
|8
 
|8
|10
+
|4
 
|
 
|
 
|
 
|
|Asiklov 25 Oct 2012
+
|Britaniola 22 Apr 2012
 +
|-
 +
|style='background-color:#0a0;'| ok
 +
|Kruidvat (Dutch dept. store)
 +
|SDHC
 +
|8
 +
|4
 +
|
 +
|
 +
|Boeboe 18 May 2012
 +
|-
 +
|style='background-color:#0a0;'| ok
 +
|Kruidvat (Dutch dept. store)
 +
|SDHC
 +
|8
 +
|10
 +
|
 +
|
 +
|Asiklov 25 Oct 2012
 +
|-
 +
|style='background-color:#c00;'| nok
 +
|Landzo
 +
|Micro SDHC
 +
|16
 +
|10
 +
|trm2815ex-d12-49
 +
|Raspi is not installed
 +
|Randomeizer 30 Mar 2018
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
Line 1,456: Line 1,775:
 
|
 
|
 
|RogerH 5 Jul 2012
 
|RogerH 5 Jul 2012
 +
|-
 +
|style='background-color:#0a0;'| ok
 +
|Lexar
 +
|microSDHC
 +
|32
 +
|10
 +
|SDMI32GBWMC300A
 +
|[man:0x000028 oem:0x4245 name:2cMJR hwrev:0x0 fwrev:0x2]
 +
|Peppernrino 9 Mar 2020
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
Line 1,465: Line 1,793:
 
|[man:0x000003 oem:0x5344 name:SMI  hwrev:0x1 fwrev:0x0]
 
|[man:0x000003 oem:0x5344 name:SMI  hwrev:0x1 fwrev:0x0]
 
|Malvineous 1 Jul 2012
 
|Malvineous 1 Jul 2012
 +
|-
 +
|style='background-color:#c00;'| nok
 +
|Lexar
 +
|microSDXC
 +
|64
 +
|10
 +
|UHS-I U1 LSDMI64GB1NL300A 12876361
 +
|Raspbian errors: delayed write errors, filesystem goes read-only
 +
|ETasse 14 May 2017
 
|-
 
|-
 
|style='background-color:#c00;'| nok
 
|style='background-color:#c00;'| nok
Line 1,490: Line 1,827:
 
|10
 
|10
 
|X-SERIES 854716.00.TW
 
|X-SERIES 854716.00.TW
|Tested with Raspberry PI A+ and Raspbian. No problems so far.
+
|Tested with Raspberry PI A+ and B+ with noobs and Raspbian. No problems so far.
|Unas 4 Dec 2014
+
Tested with Raspberry PI 2 B with noobs, Raspbian and OSMC RC. No problems.
 +
|Unas 31 Mar 2015
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
Line 1,530: Line 1,868:
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Memorex Travel Card
+
|Medion
|SDHC
+
|microSDHC
|8
+
|32
 
|10
 
|10
|?
+
|MD87144
|Works well with Raspbian 2013-09-25.
+
|micro SD on Pi2  model B with Raspbian. man:0x000027 oem:0x5048 name:SD32G hwrev:0x3 fwrev:0x0
|The Doctor, 25 October 2013
+
|KMS 26 Jun 2015
 +
|-
 +
|style='background-color:#0a0;'| ok
 +
|Medion
 +
|microSDHC
 +
|32
 +
|10
 +
|MD87252
 +
|micro SD w/adapter on model B with Raspbian. man:0x000027 oem:0x5048 name:SD32G hwrev:0x3 fwrev:0x0
 +
|KMS 22 Feb 2015
 +
|-
 +
|style='background-color:#0a0;'| ok
 +
|Memorex Travel Card
 +
|SDHC
 +
|8
 +
|10
 +
|?
 +
|Works well with Raspbian 2013-09-25.
 +
|The Doctor, 25 October 2013
 
|-
 
|-
 
|style='background-color:#c00;'| nok
 
|style='background-color:#c00;'| nok
Line 1,564: Line 1,920:
 
|hasn't worked with any of the images I've tried; appears to be completely unrecognized
 
|hasn't worked with any of the images I've tried; appears to be completely unrecognized
 
|Pnppl 11 Jun 2012
 
|Pnppl 11 Jun 2012
 +
|-
 +
|style='background-color:#0a0;'| ok
 +
|Microcenter
 +
|microSDHC
 +
|32
 +
|10
 +
|
 +
|Previous report appears to be due to bad parts.  Replacement works FINE with all images.
 +
|madscientist_42 29 Jul 2015
 +
|-
 +
|-
 +
|style='background-color:#0a0;'| ok
 +
|Microcenter
 +
|microSDHC
 +
|64
 +
|10
 +
|
 +
|Previous report appears to be due to bad parts.  Replacement works FINE with all images.
 +
|madscientist_42 29 Jul 2015
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
Line 1,753: Line 2,128:
 
|mmc0: timeout waiting for hardware interrupt
 
|mmc0: timeout waiting for hardware interrupt
 
|Selsinork 26 Apr 2012
 
|Selsinork 26 Apr 2012
 +
|-
 +
|style='background-color:#0a0;'| ok
 +
|Panasonic
 +
|SDHC
 +
|8
 +
|10
 +
|RP-SMSC08DA1
 +
|Industrial microSD card ('long life') with SLC-technology and wear leveling (like SSDs),<br />90MB/s read (datasheet), 40MB/s write (datasheet),<br />tested with RASPIAN JESSIE LITE (build 2015-11-21),<br />(man:0x000001 oem:0x5041 name:R08GS hwrev:0x2 fwrev:0x2)<br />disadvantage: very expensive (@Digi-Key: 120,-€ /130,-$)
 +
|Xaneu 17 Dec 2015
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
Line 1,872: Line 2,256:
 
|verket 8 Jan 2013
 
|verket 8 Jan 2013
 
|-
 
|-
|style='background-color:#0a0;'| ok
+
|style='background-color:#c00;'| nok
|Peak
+
|Patriot
 
|microSDHC
 
|microSDHC
|4
+
|16
|4
+
|10
 +
|PSF16GMCSDHC10
 +
|Multiple MMC (sd card) errors, several corrupt SD cards over the past 6 months, tried multiple versions of Raspbian from 4.14.34 to the latest now 4.14.71. Errors are pretty frequent. Stay away.
 +
Was purchased as a 5 pack from Amazon.
 +
|jatienza 16 Nov 2018
 +
|-
 +
|style='background-color:#c00;'| nok
 +
|Patriot
 +
|microSDHC
 +
|32
 +
|10
 +
|PSF32GMCSDHC10
 +
|Multiple MMC (sd card) errors, several corrupt SD cards over the past 6 months, tried multiple versions of Raspbian from 4.14.34 to the latest now 4.14.71. Errors are pretty frequent. Stay away.
 +
Was purchased as a 5 pack from Amazon.
 +
|jatienza 16 Nov 2018
 +
|-
 +
|style='background-color:#0a0;'| ok
 +
|Peak
 +
|microSDHC
 +
|4
 +
|4
 
|MMBTR04GUBCA-ME
 
|MMBTR04GUBCA-ME
 
|tested with Arch
 
|tested with Arch
Line 2,096: Line 2,500:
 
|Works with Wheezy, does not work with Squeeze (mmc0: timeout...), Arch (no boot) (Joshdev), or Fedora Remix. Works with Raspbmc (Sp00l)
 
|Works with Wheezy, does not work with Squeeze (mmc0: timeout...), Arch (no boot) (Joshdev), or Fedora Remix. Works with Raspbmc (Sp00l)
 
|Jecxjo 9 Jun 2012, Joshdev 22 Jun 2012, Sp00l 21 Jul 2012
 
|Jecxjo 9 Jun 2012, Joshdev 22 Jun 2012, Sp00l 21 Jul 2012
 +
|-
 +
|style='background-color:#0a0;'| ok
 +
|PNY
 +
|microSDHC
 +
|16
 +
|10
 +
|P-SDU16G10-GE
 +
|man:0x000028 oem:0x4245 name:SDU16 hwrev:0x1 fwrev:0x0 <br />
 +
Tested on Pi 2 Model B with Raspbian via NOOBS 1.4; More [http://skippingpebbles.com/Pi/PNY-Class10.html Details]
 +
|FastEddie 19 Mar 2015
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
Line 2,132: Line 2,546:
 
|Debian installation worked, [brand new] Card died a few minutes later with mmc0 timeouts, during apt-get upgrade. Never got it to work again on any system
 
|Debian installation worked, [brand new] Card died a few minutes later with mmc0 timeouts, during apt-get upgrade. Never got it to work again on any system
 
|Gryzor 10 May 2013
 
|Gryzor 10 May 2013
 +
|-
 +
|style='background-color:#c00;'| nok
 +
|PNY
 +
|SDXC
 +
|64
 +
|10
 +
|Model P-SDUX64U160GW-GE
 +
|Would not boot. (Using NOOBS. Tried formatted as FAT32 on Pi 2 and Pi 3. Compared with known good card which was reformatted, set up with NOOBS in the same manner, and worked on both Pi models.)
 +
|seanmcox 9 Jun 2016
 +
|-
 +
|style='background-color:#0a0;'| ok
 +
|PNY
 +
|SDXC
 +
|64
 +
|10
 +
|Model P-SDUX64U395PROE-GE
 +
|Use [https://www.sdcard.org/downloads/formatter_4/eula_windows/SDFormatterv4.zip SDFormatter] (Full wipe) + [http://www.verbatim.com/includes/binary_details.php3?show=1&id=840 FAT32 formatter] + NOOBS , OK !
 +
|pakkua80 9 Jan 2017
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
Line 2,183: Line 2,615:
 
|PNY
 
|PNY
 
|microSDHC
 
|microSDHC
|32
 
|10
 
|
 
|with AdaFruit adapter
 
|Wibble 22 Jan 2013
 
|-
 
|style='background-color:#c00;'| nok
 
|Polaroid
 
|SDHC
 
 
|16
 
|16
 
|10
 
|10
|P-SDHC16GB10-EFPOL
+
|P-SDU16GU190-GE
|mmc0: timeout waiting for hardware interrupt on debian6-19-04-2012
+
|tested with OpenELEC Raspberry Pi 2 Model B
|Jamesnine 28 Jun 2012
+
|riverstyxxx 7 Feb 2015
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|PQI
+
|PNY
 +
|microSDHC
 +
|22
 +
|11
 +
|P-SDU32G10PPL-GE
 +
|Tested with RPi 2B. Write: 11.02 MB/s; Read: 22.12 MB/s
 +
|Jayowski 20 Nov 2020
 +
|-
 +
|style='background-color:#0a0;'| ok
 +
|PNY
 +
|microSDHC
 +
|32
 +
|4
 +
|P-SDU32G4-GE
 +
|Tested with B+
 +
|krakrjak 2 Feb 2015
 +
|-
 +
|style='background-color:#0a0;'| ok
 +
|PNY
 +
|microSDHC
 +
|32
 +
|10
 +
|
 +
|with AdaFruit adapter
 +
|Wibble 22 Jan 2013
 +
|-
 +
|style='background-color:#0a0;'| ok
 +
|PNY
 +
|microSDXC
 +
|128
 +
|10
 +
|P-SDU128U185SEL-GE
 +
|microcenter (UPC 51492-59410)
 +
|jeglenn 12/03/2016
 +
|-
 +
|style='background-color:#c00;'| nok
 +
|Polaroid
 +
|SDHC
 +
|16
 +
|10
 +
|P-SDHC16GB10-EFPOL
 +
|mmc0: timeout waiting for hardware interrupt on debian6-19-04-2012
 +
|Jamesnine 28 Jun 2012
 +
|-
 +
|style='background-color:#0a0;'| ok
 +
|PQI
 
|SDHC
 
|SDHC
 
|8
 
|8
Line 2,233: Line 2,701:
 
|man:0x000027 oem:0x5048 name:SD08G hwrev:0x3 fwrev:0x0
 
|man:0x000027 oem:0x5048 name:SD08G hwrev:0x3 fwrev:0x0
 
|Douglas W. Jones Jan 2013
 
|Douglas W. Jones Jan 2013
 +
|-
 +
|style='background-color:#0a0;'| ok
 +
|Qilive (Auchan)
 +
|microSD
 +
|8
 +
|10 (U1)
 +
|Q.8117
 +
|
 +
|Rui Teixeira 06/2015
 
|-
 
|-
 
|style='background-color:#c00;'| nok
 
|style='background-color:#c00;'| nok
Line 2,278: Line 2,755:
 
|doesn't boot with 2012-07-15-wheezy-raspbian; OK light partially lit
 
|doesn't boot with 2012-07-15-wheezy-raspbian; OK light partially lit
 
|Doctoruseful 19 Aug 2012
 
|Doctoruseful 19 Aug 2012
 +
|-
 +
|style='background-color:#0a0;'| ok
 +
|Samsung EVO SELECT
 +
|microSDXC
 +
|64
 +
|10 UHS-1 U3
 +
|MB-ME64GA/AM
 +
|Works with Raspberry Pi 4B
 +
|sup2069 1 Jun 2020
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
Line 2,341: Line 2,827:
 
|10
 
|10
 
|MB-SPAGC
 
|MB-SPAGC
|
+
| In case of freezes add ''sdhci-bcm2708.emmc_clock_freq=120000000'' to cmdline.txt and ''init_emmc_clock=120000000'' to config.txt. There seems to be a timing/frequency problem with some of these cards.
 
|djayor 9 May 2014
 
|djayor 9 May 2014
 +
schinken 21 August 2015
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
Line 2,370: Line 2,857:
 
|man:0x00001b oem:0x534d name:00000 hwrev:0x1 fwrev:0x0 Raspberry B+ 2014-12-24-wheezy-raspbian
 
|man:0x00001b oem:0x534d name:00000 hwrev:0x1 fwrev:0x0 Raspberry B+ 2014-12-24-wheezy-raspbian
 
|c 21 Jan 2015
 
|c 21 Jan 2015
 +
|-
 +
|style='background-color:#0a0;'| ok
 +
|Samsung
 +
|microSDHC
 +
|8
 +
|4
 +
|[http://www.samsung.com/uk/consumer/memory-cards-hdd-odd/memory-cards/micro-sdhc-plus/MB-MP8GB/EU MB-MP8GB]
 +
|Raspbian 3.18 - Raspberry Pi 2<br />man:0x00001b oem:0x534d name:00000 hwrev:0x1 fwrev:0x0 - [https://snippet.host/zxyh flash-bench results]
 +
|penkd 2015-06-19
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
Line 2,377: Line 2,873:
 
|6
 
|6
 
|MMAGR08GUDCA-DB, MB-MS08DA
 
|MMAGR08GUDCA-DB, MB-MS08DA
|
+
|Similar MB-MS08D hangs on RPI 2 under ArchLinux ARM with timeout error
 
|Ewindich 24 Jul 2012 Felon 21 Jully 2014
 
|Ewindich 24 Jul 2012 Felon 21 Jully 2014
 +
|-
 +
|style='background-color:#0a0;'| ok
 +
|Samsung
 +
|microSDHC
 +
|16
 +
|6
 +
|MB-MSAGB
 +
|Installed OpenELEC-Generic.i386-5.0.8.img.gz on a Raspberry PI 2, seems to work (My initial choice Transcend TS16GUSDU1 occasionally freezed on openelec boot screen. Even though MB-MSAGB is a bit slower than Transcend by spec samsung is as snappy regardless , or may be even snappier, could'nt tell the difference really )
 +
|rene98c 11 April 2015
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
Line 2,388: Line 2,893:
 
|man:0x00001b oem:0x534d name:00000 hwrev:0x1 fwrev:0x0
 
|man:0x00001b oem:0x534d name:00000 hwrev:0x1 fwrev:0x0
 
|Olf 19 Sep 2013
 
|Olf 19 Sep 2013
 +
|-
 +
|style='background-color:#0a0;'| ok
 +
|Samsung
 +
|microSDHC
 +
|16
 +
|10
 +
|MB-MP16DA/EU
 +
|man:0x00001b oem:0x534d name:00000 hwrev:0x1 fwrev:0x0<br />
 +
Tested on Pi 2 Model B with Raspbian via NOOBS 1.4; More [http://skippingpebbles.com/Pi/Samsung-Class10.html Details]
 +
|FastEddie 10 Mar 2015
 +
|-
 +
|style='background-color:#c00;'| nok
 +
|Samsung
 +
|microSDHC
 +
|16
 +
|10
 +
|MB-MP16DA/EU
 +
|man:0x00001b oem:0x534d name:00000 hwrev:0x1 fwrev:0x0<br />
 +
Tested on Pi 2 Model B with Raspbian (Release date:2015-02-16 kernel 3.18) sd-card image. Corruption of ext4 filesystem after apt-get upgrade reboot (2 times)
 +
|MBreevoort 31 Mar 2015
 +
|-
 +
|style='background-color:#0a0;'| ok
 +
|Samsung
 +
|microSDHC
 +
|16
 +
|10
 +
|MB-MPAGA MBMPAGMDQAFA-QH DCFK0D7GC150
 +
|man:0x00001b oem:0x534d name:00000 hwrev:0x1 fwrev:0x0<br />
 +
Tested on Pi 2 Model B with Raspbian (Release date:2015-02-16 kernel 3.18) sd-card image. Ok after apt-get upgrade reboot
 +
|MBreevoort 31 Mar 2015
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
Line 2,406: Line 2,941:
 
|Comes with a SD adapter. Installed 2014-01-07 Raspbian Wheezy, works perfectly!
 
|Comes with a SD adapter. Installed 2014-01-07 Raspbian Wheezy, works perfectly!
 
|PatriotInAKilt 20 Jan 2014
 
|PatriotInAKilt 20 Jan 2014
 +
|-
 +
|style='background-color:#0a0;'| ok
 +
|Samsung EVO
 +
|microSDHC
 +
|16
 +
|10
 +
|MB-MP16D
 +
|man:0x00001b oem:0x534d name:00000 hwrev:0x1 fwrev:0x0 Tested on B+ model with 2014-12-24-wheezy-raspbian - Runs apt-get update without a problem - Raspberry Pi 2 model B, corruption if ext3/4, no problem with f2fs for two weeks
 +
|c 22 Jan 2015 - manolonte 5 Mar 2015
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
Line 2,425: Line 2,969:
 
|Carriba, 29 December 2014
 
|Carriba, 29 December 2014
 
|-
 
|-
|style='background-color:#c00;'| nok
+
|style='background-color:#0a0;'| ok
 
|Samsung EVO
 
|Samsung EVO
 
|microSDHC
 
|microSDHC
 
|32
 
|32
 
|10
 
|10
|MB-MP32DA/AM
+
|MB-MP32D
|Tested on B+ model - no adapter needed as it take microSD. Can install 2014-06-20 Raspbian image and boot OK. But afterwards, running sudo apt-get upgrade caused SD corruption. Tested with 2 cards, both exhibited the same problem.
+
|Tested on B+ with 2015-02-16-raspbian-wheezy and FreeBSD 11 CURRENT on medium overclock settings for 3 days without problems
|Striders 24 Aug 2014
+
|Herculesxe5, 4 February 2015
 
|-
 
|-
|style='background-color:#c00;'| nok
+
|style='background-color:#0a0;'| ok
 +
|Samsung EVO
 +
|microSDHC
 +
|32
 +
|10
 +
|MB-MP32DA/AM
 +
|Tested on Raspberry Pi 2 Model B (RS Components from MicroCenter).  Worked flawlessly on both Raspbian (NOOBS) and with the offensive-security Kali pre-build, each on a different card of the identical model. Please note the results from 'Striders' for Raspberry Pi Model B+ owners: Tested on B+ model - no adapter needed as it take microSD. Can install 2014-06-20 Raspbian image and boot OK. But afterwards, running sudo apt-get upgrade caused SD corruption. Tested with 2 cards, both exhibited the same problem.
 +
|Striders 24 Aug 2014, trn450 5 Sept 2015
 +
|-
 +
|style='background-color:#c00;'| nok
 +
|Samsung EVO
 +
|microSDHC
 +
|8
 +
|10
 +
|MB-MP08D/EU
 +
|Tested on rpi2, First boot OK then overclock to 900Mhz, sync some files and won't able to reboot. Put a fresh raspian then and mmc errors hardware everywhere while booting.
 +
|H4h 14 feb 2015
 +
|-
 +
|style='background-color:#0a0;'| ok
 +
|Samsung EVO
 +
|microSDHC
 +
|8
 +
|10
 +
|MB-MP08D
 +
|Tested on Raspberry Pi 2, overclocked to 900Mhz, initially stress tested for 24h (CPU with heatsink, temp recorded max at 60C), passed the [[RPiconfig#Overclock_stability_test|Overclock Stability Test]]
 +
|eNur 29 Mar 2015
 +
|-
 +
|style='background-color:#0a0;'| ok
 
|Samsung EVO
 
|Samsung EVO
 
|microSDXC
 
|microSDXC
Line 2,440: Line 3,011:
 
|10
 
|10
 
|MB-MP64D
 
|MB-MP64D
|Would not boot could not see image. Tested on B+ model.
+
|Would not boot from standard Noobs - could not see image. Tested on B+.
 +
However, used stand alone Raspbian image file and used 'Partition Wizard' (this method - http://wiiudaily.com/2014/03/format-high-capacity-card-for-3ds/ )to force FAT32 and the Pi boots no problem into Raspbian on the 64GB card. Using df reports 56GB available free space after expanding file system. Seems to create a small FAT32 partition that enables booting. Still working after update, upgrade and Rpi update. After trial using Partition Wizard in the above method can confirm Pi will not boot after 'noobs' install so recommend using Win32 Disk Imager and a stand alone OS .img file after using partition wizard for anybody having problems. I have only tested Raspbian Wheezy and no other OS. *Note* any SD card genuinely above 32GB will be formatted exFAT using standard methods and the Pi requires a FAT32 system to read at boot or it fails.  
 
|Prod 26 Dec 2014
 
|Prod 26 Dec 2014
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|SanDisk
+
|Samsung EVO
|SD
+
|microSDXC
|2
+
|64
|?
+
|10
|
+
|MB-MP64DA/AM
|Extreme III (BE0715105083B)
+
|Appears that the Pi has difficulty booting a 64GiB SDXC card that's formatted for exFAT. This card will NOT work with default settings (1/23/2015, Model B+). Workaround: download a valid image file -- not NOOBS, it must be an image. Then, use a utility such as dd or Win32DiskImager to copy the image directly to your device. This forces a small enough FAT32 partition that the RasPi will be able to read and boot. Confirmed that the "Expand Filesystem" option for Raspian still works after reboot
|Dscott 23 Apr 2012
+
|Phaerus, 2015-01-23
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|SanDisk
+
|Samsung EVO
|SD
+
|microSDXC
|2
+
|128
|?
+
|10
|
+
|MB-MP128GA/AM
|SanDisk for Wii
+
|Works with Multiboot Pi, even resized partitions though SSH. Format card originally with "SD Card Formatter". Format again to FAT32 with "guiformat.exe". Write image with "Win32DiskImager". Expand partition following these directions: "https://dracoy.com/2016/06/26/expanding-partition-on-sd-card-for-raspberry-pi-with-noobs-pre-installed/"
|Stevepdp 18 Apr 2012
+
|Tehnards, 2017-11-28
 
|-
 
|-
|style='background-color:#c00;'| nok
+
|style='background-color:#0a0;'| ok
|SanDisk
+
|Samsung EVO PLUS
|SD
+
|microSDHC
|2
+
|32
|?
+
|10
|BE0916214253D
+
|MB-MC32DA
|
+
|man:0x00001b oem:0x534d name:00000 hwrev:0x1 fwrev:0x0 - Works on Raspberry Pi 3 Raspbian Jessie 8.0 Kernel: 4.4.13-v7+
|Mate12345 9 Aug 2012
+
|torekk, 2016-06-12
 
|-
 
|-
|style='background-color:#c00;'| nok
+
|style='background-color:#0a0;'| ok
|SanDisk
+
|Samsung EVO PLUS
|SD
+
|microSDHC
|2
+
|32
|?
+
|10 UHS-1
|Extreme III (BE0722702998D)
+
|MB-MC32GA
|(man:0x000003 oem:0x5344 name:SD02G hwrev:0x8 fwrev:0x0) - tested with Raspbian (build 2012-07-15) and Raspbmc installer (build 2012-07-13)
+
|Works on Raspberry Pi 3 Model B+, Linux Retropie 4.4
|Boandlkramer 5 Aug 2012
+
|Shad87, 2018-11-07
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|SanDisk
+
|Samsung EVO PLUS
|SD
+
|microSDXC
|2
+
|128
|2
+
|10
|BE0816113150D
+
|MB-MC128DA/AMZ
|writes at 3.5 Mb/s
+
|man:0x00001b oem:0x534d name:00000 hwrev:0x1 fwrev:0x0 - Works on Rasberry Pi 2, Debian Jessie when image was copied using '''dd''' on a linux host.
|Elatllat 22 Dec 2011
+
|xonx, 2015-08-25
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|SanDisk
+
|Samsung EVO PLUS
|SD
+
|microSDXC
|2
+
|256
|4
+
|10
|Ultra
+
|MB-MC256DA/EU
|15 MB/s
+
|man:0x00001b oem:0x534d name:00000 hwrev:0x1 fwrev:0x0 - Works on Raspberry Pi 3 Model B, tested both Raspbian jessie and Raspbian stretch
|Md84419 24 Sept 2011
+
|Dethier 1 Oct 2017
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|SanDisk
+
|Samsung PRO
|SD
+
|microSDHC
|2
+
|16
|4
+
|10
|Ultra II, BE0719111366D
+
|MB-MGAGB
|
+
|man:0x00001b oem:0x534d name:00000 hwrev:0x1 fwrev:0x0 Tested on B+ model. 2014-12-24-wheezy-raspbian
|Md84419 5 Nov 2011, Oostenvr 4 Jul 2012
+
|c 22 Jan 2015
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|SanDisk
+
|Samsung PRO
|SD
+
|microSDHC
|2
+
|16
|6
+
|10
|Extreme III (BE0804212046D)
+
|MB-MG16D/EU; MB-MG16D/RU
|20 MB/s
+
|Raspbian, Tested on Raspberry Pi 2 - Raspbx. Tested Raspbian Stretch r.: 2018-03-13
|Nooitaf 20 Jun 2012
+
|tarix; c 11 Aug 2015, Randomeizer 21 Mar 2018
 
|-
 
|-
|style='background-color:#c00;'| nok
+
|style='background-color:#0a0;'| ok
|SanDisk
+
|Samsung PRO
|SDHC
+
|microSDHC
|2
+
|16
|?
+
|10
|Ultra II BE0828713280D (15 MB/s)
+
|MB-MG16DA/JP
|
+
|Works on Raspberry Pi 2 running Retropie 3.0
|Oostenvr 4 Jul 2012
+
|TERRAOperative; 25 Aug 2015
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|SanDisk
+
|Samsung PRO
|SDHC
+
|microSDHC
|4
+
|32
|2
+
|10 UHS-I
|BH0820113475D
+
|MB-MG32DA
|Tested with RPITC (Based on Raspbian Wheezy)
+
|Works perfectly on RPi 2 Model B with RasPlex 0.5.1
|Rendyair 11 Sep 2012
+
|biltong 12 Feb 2015
 
|-
 
|-
|style='background-color:#c00;'| nok
+
|style='background-color:#0a0;'| ok
|SanDisk
+
|Samsung Evo
|SDHC
+
|MICRO SDHC
|4
+
|16
|2
+
|10
|
+
|MB-MG16DA/AM
|Debian and xbmc boot, but fedora gets a lot of mmc0 note long write sync errors and then hc_xfer_timeout errors at the login prompt
+
|Raspbian on RPI2
|Optim4l 10 May 2012
+
|july 20  2015  Fawadalla
 +
|-
 +
|style='background-color:#0a0;'| ok
 +
|Samsung Evo
 +
|MICRO SDHC
 +
|16
 +
|10
 +
|MB-MP16DA/EU
 +
|installed openelec on raspberry pi 2, works great.
 +
|july 12  2015  AAGERES
 +
|-
 +
|style='background-color:#0a0;'| ok
 +
|Samsung PRO
 +
|microSDXC
 +
|64
 +
|10
 +
|MB-MG64DA/AM
 +
|Booted fine on RPi 2 Model B with RetroPie 2.6.0. I imaged the card with RPi-sd Card Builder 1.2.
 +
|atbarrington 14 April 2015
 +
|-
 +
|style='background-color:#0a0;'| ok
 +
|Samsung PRO Endurance
 +
|MicroSDXC
 +
|32
 +
|U1
 +
|MB-MJ32GA/AM
 +
|Works with Raspberry Pi 4B
 +
|lanbrown, 2020-02-17
 
|-
 
|-
|style='background-color:#c00;'| nok
+
|style='background-color:#0a0;'| ok
|SanDisk
+
|Samsung PRO+
|SDHC
+
|microSDXC
|4
+
|128
|2
+
|10 UHS-I U3
|8H825413279G "Limited Edition"
+
|MB-MD128DA/AM
|Error -110 whilst initialising sd card
+
|Tested on brand new Raspberry Pi 3 Model B. Installed Raspbian Jessie 2016-05-10, works perfectly.
|Jezmck 27 May 2012
+
|PatriotInAKilt 13 May 2016
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
 
|SanDisk
 
|SanDisk
|SDHC
+
|SD
|4
+
|2
|4
+
|?
|SDSDB-004G-B35, BH1210821913G, SDSDB-004G-BT35
 
 
|
 
|
|Md84419 6 May 2012, Nicobsa 11 Jul 2012, Ingestre 12 Jul 2012
+
|Extreme III (BE0715105083B)
 +
|Dscott 23 Apr 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
 
|SanDisk
 
|SanDisk
|SDHC
+
|SD
|4
+
|2
|4
+
|?
|Ultra II
 
 
|
 
|
|Britaniola 22 Apr 2012
+
|SanDisk for Wii
 +
|Stevepdp 18 Apr 2012
 
|-
 
|-
 
|style='background-color:#c00;'| nok
 
|style='background-color:#c00;'| nok
 
|SanDisk
 
|SanDisk
|SDHC
+
|SD
|4
+
|2
|4
+
|?
|BH1030216016G, BH1031116016G
+
|BE0916214253D
|Doesn't boot
+
|
|SquallStrife 15 May 2012, Vk2amv 9 Jun 2012
+
|Mate12345 9 Aug 2012
 
|-
 
|-
 
|style='background-color:#c00;'| nok
 
|style='background-color:#c00;'| nok
 
|SanDisk
 
|SanDisk
|SDHC
+
|SD
|4
+
|2
|4
+
|?
|Ultra (BH1028516076D)
+
|Extreme III (BE0722702998D)
|Intermitant booting ( 1/50 power on ), random timeout messages when it does boot
+
|(man:0x000003 oem:0x5344 name:SD02G hwrev:0x8 fwrev:0x0) - tested with Raspbian (build 2012-07-15) and Raspbmc installer (build 2012-07-13)
|Russell 26 Apr 2012
+
|Boandlkramer 5 Aug 2012
 
|-
 
|-
|style='background-color:#c00;'| nok
+
|style='background-color:#0a0;'| ok
 
|SanDisk
 
|SanDisk
|SDHC
+
|SD
|4
+
|2
|4
+
|2
|Ultra (15MB/s) (SDSDH-004G-U46)
+
|BE0816113150D
|won`t reboot when it`s hot
+
|writes at 3.5 Mb/s
|Sorinm 17 May 2012
+
|Elatllat 22 Dec 2011
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
 
|SanDisk
 
|SanDisk
|SDHC
+
|SD
 +
|2
 
|4
 
|4
|6
+
|Ultra
|Extreme III (30 MB/s)
+
|15 MB/s
|works with 2012-10-28-wheezy-raspbian
+
|Md84419 24 Sept 2011
|JeffS 11 Nov 2012
 
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
 
|SanDisk
 
|SanDisk
|SDHC
+
|SD
 +
|2
 
|4
 
|4
|6
+
|Ultra II, BE0719111366D
|Ultra SDSDH-004G-U46 - BH1136121837G, BH1130521822D, BH1200421822D (30MB/s)
 
 
|
 
|
|Selsinork 20 Apr 2012 / Alex347 5 May 2012 / Jjuhl 26 May 2012
+
|Md84419 5 Nov 2011, Oostenvr 4 Jul 2012
 
|-
 
|-
|style='background-color:#c00;'| nok
+
|style='background-color:#0a0;'| ok
 
|SanDisk
 
|SanDisk
|SDHC
+
|SD
|4
+
|2
 
|6
 
|6
|Extreme III C6 (BH0822411730D)
+
|Extreme III (BE0804212046D)
|
+
|20 MB/s
|Cmcr651 7 May 2012
+
|Nooitaf 20 Jun 2012
 
|-
 
|-
 
|style='background-color:#c00;'| nok
 
|style='background-color:#c00;'| nok
 
|SanDisk
 
|SanDisk
 
|SDHC
 
|SDHC
|4
+
|2
|6
+
|?
|Extreme III (30 MB/s) (BH0822712362G)
+
|Ultra II BE0828713280D (15 MB/s)
 
|
 
|
|Jezmck 27 May 2012
+
|Oostenvr 4 Jul 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
Line 2,636: Line 3,235:
 
|SDHC
 
|SDHC
 
|4
 
|4
|10
+
|2
|Extreme (BH10297143382G)
+
|BH0820113475D
|
+
|Tested with RPITC (Based on Raspbian Wheezy)
|Wrdx 19 May 2012
+
|Rendyair 11 Sep 2012
 
|-
 
|-
|style='background-color:#0a0;'| ok
+
|style='background-color:#c00;'| nok
 
|SanDisk
 
|SanDisk
 
|SDHC
 
|SDHC
 
|4
 
|4
|10
+
|2
|Extreme (SDSDX-004G-X46)
+
|
|Works with RasPlex 0.3.1
+
|Debian and xbmc boot, but fedora gets a lot of mmc0 note long write sync errors and then hc_xfer_timeout errors at the login prompt
|Bellagio 15 Nov 2013
+
|Optim4l 10 May 2012
 
|-
 
|-
 
|style='background-color:#c00;'| nok
 
|style='background-color:#c00;'| nok
Line 2,654: Line 3,253:
 
|SDHC
 
|SDHC
 
|4
 
|4
|10
+
|2
|Extreme (SDSDX-004G-X46)
+
|8H825413279G "Limited Edition"
|30 MB/s HD Video - Doesn't boot - Works with new kernel.img and start.elf (Paaland), not working with new kernel.img and start.elf 17-06-2012 or "wheezy"-beta (MrF)
+
|Error -110 whilst initialising sd card
|Paaland 21 May 2012, MrF 19 Jun 2012
+
|Jezmck 27 May 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
 
|SanDisk
 
|SanDisk
 
|SDHC
 
|SDHC
|8
 
 
|4
 
|4
 +
|4
 +
|SDSDB-004G-B35, BH1210821913G, SDSDB-004G-BT35
 
|
 
|
|writes at ~1.5MB/s
+
|Md84419 6 May 2012, Nicobsa 11 Jul 2012, Ingestre 12 Jul 2012
|Ms705 30 Mar 2012
 
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
 
|SanDisk
 
|SanDisk
 
|SDHC
 
|SDHC
|8
 
 
|4
 
|4
|Ultra BI1024716014G
+
|4
|labelled as 15MB/s
+
|Ultra II
|PhilH 3 Jun 2012
+
|
 +
|Britaniola 22 Apr 2012
 
|-
 
|-
|style='background-color:#0a0;'| ok
+
|style='background-color:#c00;'| nok
 
|SanDisk
 
|SanDisk
 
|SDHC
 
|SDHC
|8
 
 
|4
 
|4
|SDSDB-008G-B35S / SDSDB-008G-B35
+
|4
|Raspbian “wheezy”: used expand_rootfs option of sudo raspi-config command to make all 8GB available.
+
|BH1030216016G, BH1031116016G
|Swehner Jan 2013, Baji Feb 2013
+
|Doesn't boot
 +
|SquallStrife 15 May 2012, Vk2amv 9 Jun 2012
 
|-
 
|-
|style='background-color:#0a0;'| ok
+
|style='background-color:#c00;'| nok
 
|SanDisk
 
|SanDisk
 
|SDHC
 
|SDHC
|8
 
 
|4
 
|4
|SDSDB-008GBQ35 / 80-56-12024-008G
+
|4
|Tested OK with Retro Pie
+
|Ultra (BH1028516076D)
|HBG 22 AUG 2014
+
|Intermitant booting ( 1/50 power on ), random timeout messages when it does boot
 +
|Russell 26 Apr 2012
 +
|-
 +
|style='background-color:#c00;'| nok
 +
|SanDisk
 +
|SDHC
 +
|4
 +
|4
 +
|Ultra (15MB/s) (SDSDH-004G-U46)
 +
|won`t reboot when it`s hot
 +
|Sorinm 17 May 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
 
|SanDisk
 
|SanDisk
 
|SDHC
 
|SDHC
|8
 
 
|4
 
|4
|SDSDB3-008G-A16BJ / BJ's 3-pack
+
|6
|Tested OK with RISC OS
+
|Extreme III (30 MB/s)
|Lanulos 11 Sep 2013
+
|works with 2012-10-28-wheezy-raspbian
 +
|JeffS 11 Nov 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
 
|SanDisk
 
|SanDisk
 
|SDHC
 
|SDHC
|8
+
|4
 
|6
 
|6
|Ultra SDSDH-008G-U46 / BI1131222083D, BI11321422083D (20 MB/s) & SDSDH-008G-T11 (30MB/s) & SDSDH2-008G-AC11
+
|Ultra SDSDH-004G-U46 - BH1136121837G, BH1130521822D, BH1200421822D (30MB/s)
|SDSDH2-008G-AC11 requires updated Squeeze or Wheezy beta (Jim Manley)
+
|
|Dakaix 24 Apr 2012, Crox 23 Jun 2012, Jim Manley 27 Jun 2012
+
|Selsinork 20 Apr 2012 / Alex347 5 May 2012 / Jjuhl 26 May 2012
 
|-
 
|-
 
|style='background-color:#c00;'| nok
 
|style='background-color:#c00;'| nok
 
|SanDisk
 
|SanDisk
 
|SDHC
 
|SDHC
|8
+
|4
 
|6
 
|6
|Extreme (BI1101116253G)
+
|Extreme III C6 (BH0822411730D)
 
|
 
|
|Alex347 5 May 2012
+
|Cmcr651 7 May 2012
 
|-
 
|-
 
|style='background-color:#c00;'| nok
 
|style='background-color:#c00;'| nok
 
|SanDisk
 
|SanDisk
 
|SDHC
 
|SDHC
|8
+
|4
 
|6
 
|6
|Ultra SDSDH-008G-U46 (BI1201421964G / BI1201221964G / BI1131222083D), SDSRH-008G-A11 & SDSDH-008G-T11 (30 MB/s)
+
|Extreme III (30 MB/s) (BH0822712362G)
|Boots kernel but won't run init (mmc timeout waiting for interrupt) debian6-19-04-2012
+
|
|Trebor27 15 Apr 2012 / Russell 26 Apr 2012 / ChuckHunky 8 May 2012/ Ryantm 10 Jun 2012
+
|Jezmck 27 May 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
 
|SanDisk
 
|SanDisk
 
|SDHC
 
|SDHC
|8
+
|4
 
|10
 
|10
|Extreme (BI11017514367G / BI1130916254G / B11209116254G / SDSDX-008G-X46/BI1218822414G)
+
|Extreme (BH10297143382G)
|May need updated bootcode.bin (BELzEBUB), Confirmed on Debian Squeeze 2012-04-19 and Arch Linux 2012-06-13 (Arces), works with Raspian R3 (Histvan)
+
|
|Timer 16 May 2012, BELzEBUB 30 Jun 2012, Arces 9 Jul 2012, Histvan 14 Jul 2012
+
|Wrdx 19 May 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
 
|SanDisk
 
|SanDisk
 
|SDHC
 
|SDHC
|8
+
|4
 
|10
 
|10
|Extreme (SDSDX-008G-X46/BI1111816252D)
+
|Extreme (SDSDX-004G-X46)
|tested on 2013-02-09 Raspian and Rasplex 0.1.37
+
|Works with RasPlex 0.3.1
|Jahislove 11 may 2013
+
|Bellagio 15 Nov 2013
 
|-
 
|-
|style='background-color:#0a0;'| ok
+
|style='background-color:#c00;'| nok
 
|SanDisk
 
|SanDisk
 
|SDHC
 
|SDHC
|8
+
|4
 
|10
 
|10
|Extreme Pro (SDSDXPA-008G-X46)
+
|Extreme (SDSDX-004G-X46)
|(95MB/s UHS-I) - Works with stock 2012-07-15-wheezy-raspbian
+
|30 MB/s HD Video - Doesn't boot - Works with new kernel.img and start.elf (Paaland), not working with new kernel.img and start.elf 17-06-2012 or "wheezy"-beta (MrF)
|Incyi 28 Jul 2012
+
|Paaland 21 May 2012, MrF 19 Jun 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
Line 2,762: Line 3,370:
 
|SDHC
 
|SDHC
 
|8
 
|8
|10
+
|4
|Extreme Pro
+
|
|Works with stock Arch Linux 2013-05-01
+
|writes at ~1.5MB/s
|Perchrh 28 Apr 2012, Tiwipewo 27 May 2012, Perchrh 17 May 2013
+
|Ms705 30 Mar 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
Line 2,771: Line 3,379:
 
|SDHC
 
|SDHC
 
|8
 
|8
|10
+
|4
|Ultra SDSDU-008G-U46 (30 MB/s)
+
|Ultra BI1024716014G
|Works with debian6-19-04-2012 or raspbian images but not with OpenELEC r11212 (MrF). Works with OpenELEC r11493 (Vishnu vijay); works with 2013-09-25-wheezy-raspbian man:0x000003 oem:0x5344 name:SU08G hwrev:0x8 fwrev:0x0 (tswaehn)
+
|labelled as 15MB/s
|MrF 6 Jun 2012, Vishnu vijay 28 Jul 2012, tswaehn 07 dec 2013
+
|PhilH 3 Jun 2012
 +
|-
 +
|style='background-color:#0a0;'| ok
 +
|SanDisk
 +
|SDHC
 +
|8
 +
|4
 +
|SDSDB-008G-B35S / SDSDB-008G-B35
 +
|Raspbian “wheezy”: used expand_rootfs option of sudo raspi-config command to make all 8GB available.
 +
|Swehner Jan 2013, Baji Feb 2013
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
Line 2,780: Line 3,397:
 
|SDHC
 
|SDHC
 
|8
 
|8
|10
+
|4
|Ultra SDSDU-008G-A11 (30 MB/s)
+
|SDSDB-008GBQ35 / 80-56-12024-008G
|Works with raspbian images (blitzkrieg).
+
|Tested OK with Retro Pie
|Blitzkrieg 26 Feb 2013
+
|HBG 22 AUG 2014
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
Line 2,789: Line 3,406:
 
|SDHC
 
|SDHC
 
|8
 
|8
|10
+
|4
|Ultra SDSDU-008G-T11 (30 MB/s)
+
|SDSDB3-008G-A16BJ / BJ's 3-pack
|Works with Arch Linux 20130813 (L. Snow).
+
|Tested OK with RISC OS
|L. Snow 27 Dec 2013
+
|Lanulos 11 Sep 2013
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
Line 2,798: Line 3,415:
 
|SDHC
 
|SDHC
 
|8
 
|8
|10
+
|6
|Ultra SDSDU-008G-UQ46 (30 MB/s)
+
|Ultra SDSDH-008G-U46 / BI1131222083D, BI11321422083D (20 MB/s) & SDSDH-008G-T11 (30MB/s) & SDSDH2-008G-AC11
|Works with Raspbian (wheezy) 3.10.21+ (Read ~18.6MB/s  Write ~14.5MB/s) man:0x000003 oem:0x5344 name:SU08G hwrev:0x8 fwrev:0x0
+
|SDSDH2-008G-AC11 requires updated Squeeze or Wheezy beta (Jim Manley)
|Sauce 3 Dec 2013
+
|Dakaix 24 Apr 2012, Crox 23 Jun 2012, Jim Manley 27 Jun 2012
 
|-
 
|-
 
|style='background-color:#c00;'| nok
 
|style='background-color:#c00;'| nok
Line 2,807: Line 3,424:
 
|SDHC
 
|SDHC
 
|8
 
|8
|10
+
|6
|Extreme BI1108716254G, BI110209116254G
+
|Extreme (BI1101116253G)
 
|
 
|
|Dscott 23 Apr 2012, Max 31 May 2012
+
|Alex347 5 May 2012
 
|-
 
|-
 
|style='background-color:#c00;'| nok
 
|style='background-color:#c00;'| nok
Line 2,816: Line 3,433:
 
|SDHC
 
|SDHC
 
|8
 
|8
|10
+
|6
|Extreme (BI1200916252D/SDSDX-008G-X46), BI1201416254G
+
|Ultra SDSDH-008G-U46 (BI1201421964G / BI1201221964G / BI1131222083D), SDSRH-008G-A11 & SDSDH-008G-T11 (30 MB/s)
|Doesn't work with debian6-19-04-2012.img and with replacement kernel.img and start.elf (Weston). Doesn't work with Debian Wheezy beta (2012-06-18)(Halton). Doesn't work with Arch Linux 13/06/2012 (Madhur)
+
|Boots kernel but won't run init (mmc timeout waiting for interrupt) debian6-19-04-2012
|Weston 20 May 2012, Halton 8 Jun 2012, Madhur 27 Jun 2012
+
|Trebor27 15 Apr 2012 / Russell 26 Apr 2012 / ChuckHunky 8 May 2012/ Ryantm 10 Jun 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
 
|SanDisk
 
|SanDisk
 
|SDHC
 
|SDHC
|16
+
|8
|4
+
|10
|SDSDB-016G-B35
+
|Extreme (BI11017514367G / BI1130916254G / B11209116254G / SDSDX-008G-X46/BI1218822414G)
|
+
|May need updated bootcode.bin (BELzEBUB), Confirmed on Debian Squeeze 2012-04-19 and Arch Linux 2012-06-13 (Arces), works with Raspian R3 (Histvan)
|NickstaDB 17 Apr 2012
+
|Timer 16 May 2012, BELzEBUB 30 Jun 2012, Arces 9 Jul 2012, Histvan 14 Jul 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
 
|SanDisk
 
|SanDisk
 
|SDHC
 
|SDHC
|16
+
|8
|4
+
|10
|SDSDB-016G-A11
+
|Extreme (SDSDX-008G-X46/BI1111816252D)
|Tested on OpenELEC, Arch, and NOOBS
+
|tested on 2013-02-09 Raspian and Rasplex 0.1.37
|funkeywoookey 9 Jun 2013
+
|Jahislove 11 may 2013
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
 
|SanDisk
 
|SanDisk
 
|SDHC
 
|SDHC
|16
+
|8
|4
+
|10
|SDSDB-016G-FFP
+
|Extreme Pro (SDSDXPA-008G-X46)
|Attempted with Ubuntu dd.
+
|(95MB/s UHS-I) - Works with stock 2012-07-15-wheezy-raspbian
|[[User:GKFX|GKFX]] ([[User talk:GKFX|talk]]) 18:46, 31 December 2014 (UTC)
+
|Incyi 28 Jul 2012
 
|-
 
|-
|style='background-color:#c00;'| nok
+
|style='background-color:#0a0;'| ok
 
|SanDisk
 
|SanDisk
 
|SDHC
 
|SDHC
|16
+
|8
|4
+
|10
|SDSDB-016G-AFFP
+
|Extreme Pro
|Attempted with Windows, Linux dd, and Fedora ARM installer. RPi would not load and Linux could not mount after image written to card.<br>
+
|Works with stock Arch Linux 2013-05-01
''Note: I fixed the Linux error on the presumably similar SDSDB-016G-FFP after [http://www.raspberrypi.org/documentation/installation/installing-images/linux.md remembering to <code>umount</code>]. [[User:GKFX|GKFX]] ([[User talk:GKFX|talk]])''
+
|Perchrh 28 Apr 2012, Tiwipewo 27 May 2012, Perchrh 17 May 2013
|mwolfgang 19 Mar 2013
 
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
 
|SanDisk
 
|SanDisk
 
|SDHC
 
|SDHC
|16
+
|8
|6
+
|10
|Ultra (30MB/s) (BL1133921933G)
+
|Ultra SDSDU-008G-U46 (30 MB/s)
|Works with OpenELEC r11324
+
|Works with debian6-19-04-2012 or raspbian images but not with OpenELEC r11212 (MrF). Works with OpenELEC r11493 (Vishnu vijay); works with 2013-09-25-wheezy-raspbian man:0x000003 oem:0x5344 name:SU08G hwrev:0x8 fwrev:0x0 (tswaehn)
|Reckoner 17 Jun 2012
+
|MrF 6 Jun 2012, Vishnu vijay 28 Jul 2012, tswaehn 07 dec 2013
 
|-
 
|-
|style='background-color:#c00;'| nok
+
|style='background-color:#0a0;'| ok
 
|SanDisk
 
|SanDisk
 
|SDHC
 
|SDHC
|16
+
|8
|6
+
|10
|Ultra (BL1202021933G)
+
|Ultra SDSDU-008G-A11 (30 MB/s)
|
+
|Works with raspbian images (blitzkrieg).
|Dscott 23 Apr 2012
+
|Blitzkrieg 26 Feb 2013
 
|-
 
|-
|style='background-color:#c00;'| nok
+
|style='background-color:#0a0;'| ok
 
|SanDisk
 
|SanDisk
 
|SDHC
 
|SDHC
|16
+
|8
|6
+
|10
|Ultra I (BL1205921933G)
+
|Ultra SDSDU-008G-T11 (30 MB/s)
|Boots kernel but won't run init (mmc timeout waiting for interrupt)
+
|Works with Arch Linux 20130813 (L. Snow).
|SnarlingFox 10 May 2012
+
|L. Snow 27 Dec 2013
 
|-
 
|-
|style='background-color:#c00;'| nok
+
|style='background-color:#0a0;'| ok
 
|SanDisk
 
|SanDisk
 
|SDHC
 
|SDHC
|16
+
|8
|6
+
|10
|Extreme
+
|Ultra SDSDU-008G-UQ46 (30 MB/s)
|(man:0x000003 oem:0x5344 name:SD16G hwrev:0x8 fwrev:0x0), boots, (mmc0: timeout waiting for hardware interrupt, followed by continuous I/O errors, timeouts, etc), 2013-02-09-wheezy-raspbian
+
|Works with Raspbian (wheezy) 3.10.21+ (Read ~18.6MB/s  Write ~14.5MB/s) man:0x000003 oem:0x5344 name:SU08G hwrev:0x8 fwrev:0x0
|Bernard Ladenthin 12 Mar 2013
+
|Sauce 3 Dec 2013
 
|-
 
|-
|style='background-color:#0a0;'| ok
+
|style='background-color:#c00;'| nok
 
|SanDisk
 
|SanDisk
 
|SDHC
 
|SDHC
|16
+
|8
 
|10
 
|10
|Extreme (45MB/s U1)(BL1203322025G), (30MB/s HD Video)(SDSDX3-016G-X46), (45MB/s U1)(BL1203322025G)
+
|Extreme BI1108716254G, BI110209116254G
|Doesn't work with debian6-19-04-2012 image, but does work with 2012-06-18-wheezy-beta.img and updated firmware (tested 2012-07-02). Danbowes: Working with latest RaspBMC image (tested 12/09/2012)
+
|
|Flatline403 12 May 2012, Dkleeman 13 Jun 2012, Zbyszek 2 Jul 2012, Danbowes 13 Sep 2012
+
|Dscott 23 Apr 2012, Max 31 May 2012
 
|-
 
|-
|style='background-color:#0a0;'| ok
+
|style='background-color:#c00;'| nok
 
|SanDisk
 
|SanDisk
 
|SDHC
 
|SDHC
|32
+
|8
 
|10
 
|10
|Extreme PLUS SDSDXS-032G-A46 (80MB/s UHS-I)
+
|Extreme (BI1200916252D/SDSDX-008G-X46), BI1201416254G
|RPi Model B+ - No issues or errors encountered, using RetroPie 2.3 (man:0x000003 oem:0x5344 name:SE32G hwrev:0x8 fwrev:0x0)
+
|Doesn't work with debian6-19-04-2012.img and with replacement kernel.img and start.elf (Weston). Doesn't work with Debian Wheezy beta (2012-06-18)(Halton). Doesn't work with Arch Linux 13/06/2012 (Madhur)
|arcooke 21 Aug 2014
+
|Weston 20 May 2012, Halton 8 Jun 2012, Madhur 27 Jun 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
 
|SanDisk
 
|SanDisk
 
|SDHC
 
|SDHC
|16
+
|8
 
|10
 
|10
|Extreme Pro SDSDXPA-016G-A75 (95MB/s UHS-I)
+
|UHS-I SDSDQUAN-008G-Z4A
|Doesn't work with stock debian6-19-04-2012 image, but does work with freshly compiled kernel
+
|Works fine with raspberry PI2
|AXon 26 May 2012
+
|v-milenin, 15 sep 2015
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
 
|SanDisk
 
|SanDisk
 
|SDHC
 
|SDHC
|16
+
|8
 
|10
 
|10
|Ultra (30MB/s UHS-I) (SDSDU-016G-U46) (SDSDU-016G-U46S)
+
|SDSDQUN-008G-FFP-A
|Works with debian6-19-04-2012 (Misox12). Kernel Panic with debian6-19-04-2012. Worked fine with Wheezy image (Casestudies). Works fine with Raspbian Wheezy 2013-02-09, man:0x000003 oem:0x5344 name:SU16G hwrev:0x8 fwrev:0x0 (Fraoch).
+
|Tested on raspbian-wheezy raspi 3.18.11-v7+
|Misox12 30 May 2012, Casestudies 30 Jun 2012, Fraoch 25 March 2013
+
|datPaul 25 Jul 2015
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
 
|SanDisk
 
|SanDisk
|microSDHC
+
|SDHC
 
|16
 
|16
|10
+
|4
|Ultra microSDHC I UHS-I
+
|SDSDB-016G-B35
|man:0x000003 oem:0x5344 name:SU16G hwrev:0x8 fwrev:0x0. Works again since raspberrypi-firmware 20130116 in archlinux-arm. write 6.8 MB/s, read 21.0 MB/s
+
|
|fiodschi, 19 Jan 2013
+
|NickstaDB 17 Apr 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
Line 2,943: Line 3,559:
 
|SDHC
 
|SDHC
 
|16
 
|16
|10
+
|4
|Extreme SDHC (45MB/s UHS-I) (SDSDX-016G-X46)
+
|SDSDB-016G-A11
|Works with Raspbian “wheezy” and works with OpenELEC
+
|Tested on OpenELEC, Arch, and NOOBS
|Fazdogg 08 Jan 2013; Shadyeglenn 14 Feb 2013
+
|funkeywoookey 9 Jun 2013
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
 
|SanDisk
 
|SanDisk
 
|SDHC
 
|SDHC
|32
+
|16
 
|4
 
|4
|
+
|SDSDB-016G-FFP
|
+
|Attempted with Ubuntu dd.
|Daviewales 30 May 2012
+
|[[User:GKFX|GKFX]] ([[User talk:GKFX|talk]]) 18:46, 31 December 2014 (UTC)
 
|-
 
|-
|style='background-color:#0a0;'| ok
+
|style='background-color:#c00;'| nok
 
|SanDisk
 
|SanDisk
 
|SDHC
 
|SDHC
|32
+
|16
|6
+
|4
|
+
|SDSDB-016G-AFFP
|
+
|Attempted with Windows, Linux dd, and Fedora ARM installer. RPi would not load and Linux could not mount after image written to card.<br>
|Helpme1986 22 Apr 2012
+
''Note: I fixed the Linux error on the presumably similar SDSDB-016G-FFP after [http://www.raspberrypi.org/documentation/installation/installing-images/linux.md remembering to <code>umount</code>]. [[User:GKFX|GKFX]] ([[User talk:GKFX|talk]])''
 +
|mwolfgang 19 Mar 2013
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
 
|SanDisk
 
|SanDisk
 
|SDHC
 
|SDHC
|32
+
|16
|10
+
|6
|Extreme (45MB/s UHS-I) (SDSDX-032G-X46)
+
|Ultra (30MB/s) (BL1133921933G)
|works with arch-04-29-image and latest firmware (booting problems without firmware update) / works with debian wheezy kernel 3.2.27+ (jLo)
+
|Works with OpenELEC r11324
|Malhelo 8 Jun 2012 / jLo 2 Jan 2013
+
|Reckoner 17 Jun 2012
 
|-
 
|-
|style='background-color:#0a0;'| ok
+
|style='background-color:#c00;'| nok
 
|SanDisk
 
|SanDisk
 
|SDHC
 
|SDHC
|32
+
|16
|10
+
|6
|Ultra (30MB/s UHS-I) (SDSDU-032G-U46)
+
|Ultra (BL1202021933G)
|Works with debian6-19-04-2012
+
|
Works with 2014-01-07-wheezy-raspbian<br />
+
|Dscott 23 Apr 2012
Works with wheezy-raspbian 22 May 2014
+
|-
man:0x000003 oem:0x5344 name:SU32G hwrev:0x8 fwrev:0x0
+
|style='background-color:#c00;'| nok
|Pnppl 11 Jun 2012
+
|SanDisk
Sheegoth on 12 Feb 2014
+
|SDHC
GrimFaker 22 May 2014
+
|16
 +
|6
 +
|Ultra I (BL1205921933G)
 +
|Boots kernel but won't run init (mmc timeout waiting for interrupt)
 +
|SnarlingFox 10 May 2012
 +
|-
 +
|style='background-color:#c00;'| nok
 +
|SanDisk
 +
|SDHC
 +
|16
 +
|6
 +
|Extreme
 +
|(man:0x000003 oem:0x5344 name:SD16G hwrev:0x8 fwrev:0x0), boots, (mmc0: timeout waiting for hardware interrupt, followed by continuous I/O errors, timeouts, etc), 2013-02-09-wheezy-raspbian
 +
|Bernard Ladenthin 12 Mar 2013
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
 
|SanDisk
 
|SanDisk
 
|SDHC
 
|SDHC
|32
+
|16
 
|10
 
|10
|Elevate (30 MB/s) SDSDU-032G-T11
+
|Extreme (45MB/s U1)(BL1203322025G), (30MB/s HD Video)(SDSDX3-016G-X46), (45MB/s U1)(BL1203322025G)
|Works with 2012-12-16-wheezy-raspbian
+
|Doesn't work with debian6-19-04-2012 image, but does work with 2012-06-18-wheezy-beta.img and updated firmware (tested 2012-07-02). Danbowes: Working with latest RaspBMC image (tested 12/09/2012)
|bderry71 08 Jan 2013
+
|Flatline403 12 May 2012, Dkleeman 13 Jun 2012, Zbyszek 2 Jul 2012, Danbowes 13 Sep 2012
 +
 
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
 
|SanDisk
 
|SanDisk
|SDXC
+
|SDHC
|64
+
|16
 
|10
 
|10
|Extreme (SDSDX-064G-X46)
+
|Extreme Pro SDSDXPA-016G-A75 (95MB/s UHS-I)
|45 MB/s UHS-I: works with 2012-07-15-wheezy-raspbian
+
|Doesn't work with stock debian6-19-04-2012 image, but does work with freshly compiled kernel
|Cracki 10 Aug 2012
+
|AXon 26 May 2012
 
|-
 
|-
|style='background-color:#c00;'| nok
+
|style='background-color:#0a0;'| ok
 
|SanDisk
 
|SanDisk
|SDXC
+
|SDHC
|64
+
|16
 
|10
 
|10
|Ultra (SDSDU-064G-U46)
+
|Ultra (30MB/s UHS-I) (SDSDU-016G-U46) (SDSDU-016G-U46S)
|2014-03-15-wheezy-raspbian crashed every week with reading errors. Card switched to readonly after one month. The same happened with a replacement card.
+
|Works with debian6-19-04-2012 (Misox12). Kernel Panic with debian6-19-04-2012. Worked fine with Wheezy image (Casestudies). Works fine with Raspbian Wheezy 2013-02-09, man:0x000003 oem:0x5344 name:SU16G hwrev:0x8 fwrev:0x0 (Fraoch).  
|hypnotoad 30 mar 14
+
|Misox12 30 May 2012, Casestudies 30 Jun 2012, Fraoch 25 March 2013
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
 
|SanDisk
 
|SanDisk
|SDXC
+
|SDHC
|64
+
|16
 
|10
 
|10
|Ultra SDXC UHS-I FFP (3A114807)
+
|SDSDQUAN-016G-G4A
|
+
|Works great with Raspbian [2015-02-16]; man:0x000003 oem:0x5344 name:SU16G hwrev:0x8 fwrev:0x0
|Zagblorg 26 Jul 2012
+
|john Pi-day 2015
 
|-
 
|-
|style='background-color:#c00;'| nok
+
|style='background-color:#0a0;'| ok
 
|SanDisk
 
|SanDisk
|SDXC
+
|SDHC
|128
+
|16
 
|10
 
|10
|Extreme (45MB/s UHS-I)
+
|Extreme SDHC (45MB/s UHS-I) (SDSDX-016G-X46)
|Don't work (Tested on Two)
+
|Works with Raspbian “wheezy” and works with OpenELEC
|OTHMAN 2014 02 10
+
|Fazdogg 08 Jan 2013; Shadyeglenn 14 Feb 2013
 
|-
 
|-
|style='background-color:#c00;'| nok
+
|style='background-color:#0a0;'| ok
 
|SanDisk
 
|SanDisk
|miniSDHC
+
|SDHC
|2
+
|32
|
+
|4
|Ultra II miniSD. BE07107FJE
+
|SDSDQB-032G-A46
|Doesn't boot
+
|RPi B 3 - No issues or errors encountered installing from NOOBS on newly formatted partition.
|Pe7er 18 Mar 2013
+
|seanmcox 11 Jun 2016
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
 
|SanDisk
 
|SanDisk
|microSDHC
+
|SDHC
|4
+
|32
|2
+
|10
|
+
|Extreme PLUS SDSDXS-032G-A46 (80MB/s UHS-I)
|with SanDisk microSD to SD adapter
+
|RPi Model B+ - No issues or errors encountered, using RetroPie 2.3 (man:0x000003 oem:0x5344 name:SE32G hwrev:0x8 fwrev:0x0)
|Rew 24 Apr 2012
+
|arcooke 21 Aug 2014
 +
 
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
 
|SanDisk
 
|SanDisk
|microSDHC
+
|SDHC
|4
+
|32
 
|4
 
|4
 
|
 
|
|with SanDisk microSD to SD adapter
+
|
|Sleepy 1 May 2012
+
|Daviewales 30 May 2012
 
|-
 
|-
|style='background-color:#c00;'| nok
+
|style='background-color:#0a0;'| ok
 
|SanDisk
 
|SanDisk
|microSDHC
+
|SDHC
|4
+
|32
 
|6
 
|6
|Mobile Ultra
 
|Boots kernel but won't run init (mmc timeout waiting for interrupt) - Jens Pedersen / (tried 15-06-2012 with kernel 19-04-2012) error -84 transferring data, kernel panic: no init found - Wieltje
 
|Jens Pedersen 8 May 2012, Wieltje 15 Jun 2012
 
|-
 
|style='background-color:#0a0;'| ok
 
|SanDisk
 
|microSDHC
 
|8
 
|2
 
 
|
 
|
 
|
 
|
|Fjen 12 May 2012
+
|Helpme1986 22 Apr 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
 
|SanDisk
 
|SanDisk
|microSDHC
+
|SDHC
|8
+
|32
|4
+
|10
|
+
|Extreme (45MB/s UHS-I) (SDSDX-032G-X46)
|with SanDisk microSD to SD adapter
+
|works with arch-04-29-image and latest firmware (booting problems without firmware update) / works with debian wheezy kernel 3.2.27+ (jLo)
|Md84419 21 Apr 2012
+
|Malhelo 8 Jun 2012 / jLo 2 Jan 2013
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
 
|SanDisk
 
|SanDisk
|microSDHC
+
|SDHC
|8
+
|32
|4
+
|10
|SDSDQM-008G-B35
+
|Ultra (30MB/s UHS-I) (SDSDU-032G-U46)
|man:0x000003 oem:0x5344 name:SU08G hwrev:0x8 fwrev:0x0
+
|Works with debian6-19-04-2012
|jonasbits 12 Sept 2013
+
Works with 2014-01-07-wheezy-raspbian<br />
|-
+
Works with wheezy-raspbian 22 May 2014
|style='background-color:#c00;'| nok
+
man:0x000003 oem:0x5344 name:SU32G hwrev:0x8 fwrev:0x0
|SanDisk
+
|Pnppl 11 Jun 2012
|microSDHC
+
Sheegoth on 12 Feb 2014
|8
+
GrimFaker 22 May 2014
|6
 
|Mobile Ultra (SDSDQY-008G-U46A)
 
|working with the latest firmware, won`t reboot when it`s hot
 
|Sorinm 17 May 2012
 
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
 
|SanDisk
 
|SanDisk
|microSDHC
+
|SDHC
|8
+
|32
 
|10
 
|10
|Ultra (SDSDQU-008G-U46) (30MB/s UHS-I)
+
|Ultra (UHS-I A1) SDSQUAR-032G-GN6MA
|tested and working on Raspbian wheezy (and RaspBMC)
+
|RPi Model B+ - No issues or errors encountered using RetroPie 4.4 and 4.3.17
|Pepindur 11 Sep 2012
+
(man:0x000003 oem:0x5344 name:SC32G hwrev:0x8 fwrev:0x0)
 +
|17 April 2018
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
 
|SanDisk
 
|SanDisk
|microSDHC
+
|SDHC
|8
+
|32
 
|10
 
|10
|Mobile Ultra (48MB/s UHS-I) (SDSDQUA-008G-U46A)
+
|Elevate (30 MB/s) SDSDU-032G-T11
|working with the latest firmware
+
|Works with 2012-12-16-wheezy-raspbian
|pravin_tavagad 24 Nov 2014
+
|bderry71 08 Jan 2013
 
|-
 
|-
|style='background-color:#c00;'| nok
+
|style='background-color:#0a0;'| ok
 
|SanDisk
 
|SanDisk
|microSDHC
+
|SDHC
|8
+
|32
 
|10
 
|10
|SDSDQUA-008G-U46
+
|Ultra UHS-I
|doesnt work with raspbian,arch,noob-lite man:0x000015 oem:0x0100 name:VYL00M hwrev:0x0 fwrev:0x0
+
|works on Raspbian, MATE (Tested)
|Freemind 12 Sep 2014
+
|SandPox 04 Jun 2015
 
|-
 
|-
|style='background-color:#c00;'| nok
+
|style='background-color:#0a0;'| ok
 
|SanDisk
 
|SanDisk
|microSDHC
+
|SDHC
|16
+
|32
|4
+
|10
|
+
|Elevate (30 MB/s) SDSDU-032G-T11
|(man:0x000003 oem:0x5344 name:SU16G hwrev:0x8 fwrev:0x0), with microSD to SD adapter, boots, (mmc0: timeout waiting for hardware interrupt, followed by continuous I/O errors, timeouts, etc), 2013-02-09-wheezy-raspbian
+
|Works with 2012-12-16-wheezy-raspbian
|Bernard Ladenthin 12 Mar 2013
+
|bderry71 08 Jan 2013
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
 
|SanDisk
 
|SanDisk
|microSDHC
+
|SDXC
|16
+
|64
 
|10
 
|10
|Mobile Ultra (30MB/s UHS-I) (SDSDQUA-016G-U46A)
+
|Extreme(SDSDQXN-064G-G46A)
|working with the latest firmware
+
|UHS-I: works with 2015-02-16-wheezy-raspbian
|Mengineer 25 Aug 2012
+
|map7 02/03/2015
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Sandisk
+
|SanDisk
|microSDHC
+
|SDXC
|16
+
|64
|?
 
|Sandisk Extreme
 
|man:0x000003 oem:0x5344 name:SE16G hwrev:0x8 fwrev:0x0. write 18.2 MB/s, read 18.8 MB/s Works with 2014-09-09-wheezy-raspbian on Model B+
 
|03 Dec 2014
 
|-
 
|style='background-color:#c00;'| nok
 
|SanDisk
 
|microSDHC
 
|16
 
 
|10
 
|10
|Extreme Pro (95MB/s UHS-I) (SDSDQXP-016G-AFFP)
+
|Extreme (SDSDX-064G-X46)
|Installs and boots but random umounts occur and requires reboots, no work around found.
+
|45 MB/s UHS-I: works with 2012-07-15-wheezy-raspbian
|sdn3rd 15 Mar 2014
+
|Cracki 10 Aug 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
 
|SanDisk
 
|SanDisk
|microSDHC
+
|SDXC
|32
+
|64
|4
+
|10
|
+
|Ultra (SDSDQUAN-064G-G4A)
|
+
|2015-02-16-wheezy-raspbian works well.
|Sherman 19 Jul 2012
+
|map7 02/03/2015
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
 
|SanDisk
 
|SanDisk
|microSDHC
+
|SDXC
|32
+
|64
 
|10
 
|10
|SDSDQU-032G-U46A
+
|Ultra (SDSDQUAN-064G-G4A)
|archlinux-hf-2013-02-11
+
|2015-02-16-wheezy-raspbian works well. However NOOBS_v1_4_0 failed.
|pAIgn10 6 Jun 2013
+
|twidmer 14/04/2015
 
|-
 
|-
|style='background-color:#0a0;'| ok
+
|style='background-color:#c00;'| nok
 
|SanDisk
 
|SanDisk
|microSDHC
+
|SDXC
|32
+
|64
 
|10
 
|10
|SDSDQXN-032G-FFPA
+
|Ultra (SDSDQU-064G-AFFP-A)
|RPi Model B+, raspbian-wheezy-2014-12-24
+
|Would not boot with quick or full format and current NOOBS image from RPi Downloads. Just red & green solid LED and blank screen. Confirmed another card worked fine.
man:0x000003 oem:0x5344 hwrev:0x8 fwrev:0x0
+
|ambrogio 24 jun 15
|rico 31 Dec 2014
 
 
|-
 
|-
|style='background-color:#0a0;'| ok
+
|style='background-color:#c00;'| nok
 
|SanDisk
 
|SanDisk
|microSDXC
+
|SDXC
 
|64
 
|64
|6
+
|10
|SDSDQY-064G-A11A
+
|Ultra (SDSDU-064G-U46)
|boots up much more consistently with latest firmware
+
|2014-03-15-wheezy-raspbian crashed every week with reading errors. Card switched to readonly after one month. The same happened with a replacement card.
|LastSilmaril 23 May 2012
+
|hypnotoad 30 mar 14
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
 
|SanDisk
 
|SanDisk
|microSDXC
+
|SDXC
|128
+
|64
 
|10
 
|10
|Write: 10.6 MB/s, Read: 18.6 MB/s, man:0x000003 oem:0x5344 name:SL128 hwrev:0x8 fwrev:0x0
+
|Ultra SDXC UHS-I FFP (3A114807)
|Works with Raspbian on Model B+
+
|
|Mstu 23 Nov 2014
+
|Zagblorg 26 Jul 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|SCT
+
|SanDisk
 
|SDXC
 
|SDXC
 
|64
 
|64
 
|10
 
|10
|STC SM649A-130125
+
|Ultra (SDSQUNB-O64G-GN3MN)
|2013-02-09-wheezy-raspbian.img, booted cleanly, installed LibreOffice OK
+
|Tested on Raspberry Pi 2 Model B and Raspberry Pi 3 Model B with Retropie, works fine.
|Lanulos 29 Mar 2013
+
|Khalidaou 6 Feb 2017
 +
|-
 +
|style='background-color:#c00;'| nok
 +
|SanDisk
 +
|SDXC
 +
|128
 +
|10
 +
|Extreme (45MB/s UHS-I)
 +
|Don't work (Tested on Two)
 +
|OTHMAN 2014 02 10
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Silicon Power
+
|SanDisk
|SDHC
+
|SDXC
|8
+
|512
 
|10
 
|10
|SP008GBSDH010V10
+
|Extreme Pro (95MB/s UHS-I U3)
|Works fine 2012-12-16-wheezy-raspbian.img - Tested 14/01/2013
+
|NOOBS does not work: ("Error resizing existing FAT partition ... WARNING: you are attempting to use /usr/sbin/parted to operate on (resize) a file system. ... Error: Unable to satisfy all constraints on the partition."). Download a valid image file -- not NOOBS, it must be an image (for me, 2015-05-05-raspbian-wheezy.img). Then, use a utility such as dd or Win32DiskImager to copy the image directly to your device. The RasPi will be able to read and boot. Confirmed that the "Expand Filesystem" option for Raspbian still works after reboot. Working on Model B and B+ (the latter using SD female to microSD male ribbon adaptor).
|Thenix 14 Jan 2013
+
|peterburk 2015-10-28
 
|-
 
|-
 
|style='background-color:#c00;'| nok
 
|style='background-color:#c00;'| nok
|Silicon Power
+
|SanDisk
|SDHC
+
|miniSDHC
|8
+
|2
|10
+
|
|SP008GBSDH010V10
+
|Ultra II miniSD. BE07107FJE
|Boots kernel but won't run init (mmc timeout waiting for interrupt ) - Tested 20/11/2012, 2012-10-28-wheezy-raspbian.img with Nov 20 kernel
+
|Doesn't boot
|Xthexder 21 Nov 2012
+
|Pe7er 18 Mar 2013
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Silicon Power
+
|SanDisk
|SDHC
+
|microSDHC
|16
+
|4
|6
+
|2
|SP016GBSDH006V10
 
 
|
 
|
|Valery 05 Apr 2013
+
|with SanDisk microSD to SD adapter
 +
|Rew 24 Apr 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Silicon Power
+
|SanDisk
|SDHC
+
|microSDHC
|16
+
|4
|10
+
|4
|SP016GBSDH010V10
 
 
|
 
|
|Xthexder 21 Nov 2012
+
|with SanDisk microSD to SD adapter
 +
|Sleepy 1 May 2012
 
|-
 
|-
 
|style='background-color:#c00;'| nok
 
|style='background-color:#c00;'| nok
|Silicon Power
+
|SanDisk
|SDHC
 
|32
 
|6
 
|LS2N732GQON03ASP
 
|boots debian6-19-04-2012.img, but frequent slow response / system hangs
 
|Michthom 21 Jun 2012
 
|-
 
|style='background-color:#0a0;'| ok
 
|Silicon Power
 
 
|microSDHC
 
|microSDHC
 
|4
 
|4
 
|6
 
|6
|SP004GBSTH006V10-SP
+
|Mobile Ultra
|
+
|Boots kernel but won't run init (mmc timeout waiting for interrupt) - Jens Pedersen / (tried 15-06-2012 with kernel 19-04-2012) error -84 transferring data, kernel panic: no init found - Wieltje
|Csgabe 19 May 2012
+
|Jens Pedersen 8 May 2012, Wieltje 15 Jun 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Silicon Power
+
|SanDisk
 
|microSDHC
 
|microSDHC
 
|8
 
|8
|10
+
|2
|S608G1202
+
|
 
|
 
|
|Blutme 17 Aug 2012
+
|Fjen 12 May 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Silicon Power
+
|SanDisk
|MicroSDHC
+
|microSDHC
 
|8
 
|8
|10
+
|4
|SP008GBSTH010V10SP
+
|
| Read:15.7 MB/s Write:5.5 MB/s, (man:0x000082 oem:0x4a54 name:NCard hwrev:0x0 fwrev:0x2)
+
|with SanDisk microSD to SD adapter
|Thu 01 Jan 2015
+
|Md84419 21 Apr 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Silicon Power
+
|SanDisk
 
|microSDHC
 
|microSDHC
|16
+
|8
|10
+
|4
|SP016GBSDH010V10
+
|SDSDQM-008G-B35
|
+
|man:0x000003 oem:0x5344 name:SU08G hwrev:0x8 fwrev:0x0
|Jamesnine 10 Jun 2012
+
|jonasbits 12 Sept 2013
 
|-
 
|-
|style='background-color:#0a0;'| ok
+
|style='background-color:#c00;'| nok
|Sony
+
|SanDisk
|SDHC
+
|microSDHC
|4
+
|8
|4
+
|6
|SF-4B4, SF-4N4
+
|Mobile Ultra (SDSDQY-008G-U46A)
|(Write 6MB/s, Read 20MB/s)
+
|working with the latest firmware, won`t reboot when it`s hot
|Krischaplin 7 May 2012
+
|Sorinm 17 May 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Sony
+
|SanDisk
|SDHC
+
|microSDHC
|4
+
|8
 
|10
 
|10
|UHS-1 40MB/s SF-4UY man:0x000027 oem:0x5048 name:SD04G hwrev:0x3 fwrev:0x0
+
|Ultra (SDSDQU-008G-U46) (30MB/s UHS-I)
|Perfect with Raspbian. With openELEC I get warnings in the logs (mmc0: DMA IRQ 6 ignored - results were reset - mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignoring it) (Write 10,3MB/s, Read 18,8MB/s)
+
|tested and working on Raspbian wheezy (and RaspBMC)
|Knopfler19 20 Jun 2013
+
|Pepindur 11 Sep 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Sony
+
|SanDisk
|SDHC
+
|microSDHC
 
|8
 
|8
|4
+
|10
|
+
|Mobile Ultra (48MB/s UHS-I) (SDSDQUA-008G-U46A)
|(Write 11.8MB/s, Read 17.4MB/s)
+
|working with the latest firmware
|Slabua 9 Aug 2012
+
|pravin_tavagad 24 Nov 2014
 
|-
 
|-
|style='background-color:#0a0;'| ok
+
|style='background-color:#c00;'| nok
|Sony
+
|SanDisk
|SDHC
+
|microSDHC
 
|8
 
|8
 
|10
 
|10
|UHS-1 SF8UX
+
|SDSDQUA-008G-U46
|Write 17.2 MB/s, Read 20.8 MB/s, Raspbian works while image copied using windows
+
|doesnt work with raspbian,arch,noob-lite man:0x000015 oem:0x0100 name:VYL00M hwrev:0x0 fwrev:0x0
|Regi24 29 Dec 2012, Hariram April 12, 2013, Hareesh G S June 6, 2013 (Openelec Image)
+
|Freemind 12 Sep 2014
|-
+
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Sony
+
|SanDisk
|SDHC
+
|microSDHC
 
|8
 
|8
 
|10
 
|10
|UHS-1 90MB/s SF-8UX man:0x000082 oem:0x4a54 name:NCard hwrev:0x0 fwrev:0x0  
+
|Ultra (SDSDQUAN-008G-G4A)
|Perfect with Raspbian. With openELEC I get warnings in the logs (mmc0: DMA IRQ 6 ignored - results were reset - mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignoring it) (Write 16,9 MB/s, Read 21,1 MB/s)
+
|man:0x000003 oem:0x5344 name:SL08G hwrev:0x8 fwrev:0x0 Model B+ 2014-12-24-wheezy-raspbian
|Knopfler19 20 Jun 2013
+
|c 22 Jan 2015, Jon 3 Mar 2015
 
|-
 
|-
|style='background-color:#0a0;'| ok
+
|style='background-color:#c00;'| nok
|Sony
+
|SanDisk
|SDHC
+
|microSDHC
|8
+
|16
 
|10
 
|10
|UHS-I SF-8UY/TQ1 man:0x000082 oem:0x4a54 name:NCard hwrev:0x0 fwrev:0x2
+
|Extreme Pro (95MB/s UHS-I) (SDSDQXP-016G-AFFP)
|Works fine with Raspbian. (Write 13.37 MB/s, Read 20.93 MB/s)
+
|Installs and boots but random umounts occur and requires reboots, no work around found.
|c5jirzex52xx, 18 Nov 2013
+
|sdn3rd 15 Mar 2014
 +
|-
 +
|style='background-color:#c00;'| nok
 +
|SanDisk
 +
|microSDHC
 +
|16
 +
|4
 +
|
 +
|(man:0x000003 oem:0x5344 name:SU16G hwrev:0x8 fwrev:0x0), with microSD to SD adapter, boots, (mmc0: timeout waiting for hardware interrupt, followed by continuous I/O errors, timeouts, etc), 2013-02-09-wheezy-raspbian
 +
|Bernard Ladenthin 12 Mar 2013
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Sony
+
|SanDisk
|SDHC
+
|microSDHC
 
|16
 
|16
 
|10
 
|10
|UHS-1
+
|Mobile Ultra (30MB/s UHS-I) (SDSDQUA-016G-U46A)
|Works well with Raspian.
+
|working with the latest firmware; Works with OpenELEC 5.0.1 on Raspberry Pi 2 Model B.
|Bafeigum 23 Aug 2013; DBlessing 12 Mar 2014 (Confirmed)
+
|Mengineer 25 Aug 2012, Shadyeglenn 12 Feb 2015
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Sony
+
|SanDisk
|SDHC
+
|microSDHC
|32
+
|16
 
|10
 
|10
|SF-32NX/TQ
+
|SDSDQUIP-016G-A46
|Max read speed of ~94 MB/s, min write speed of ~10 MB/s) - Works with archlinuxarm-29-04-2012 dd image with latest firmware update (as of 10-06-2012)
+
|man:0x000003 oem:0x5344 name:SL16G hwrev:0x8 fwrev:0x0<br />
|Chbg 13 Jun 2012
+
Tested on Pi 2 Model B with Raspbian via NOOBS 1.4; More [http://skippingpebbles.com/Pi/SanDisk-Class10.html Details]
 +
|FastEddie 19 Mar 2015
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Sony
+
|SanDisk
|SDHC
+
|microSDHC
|32
+
|16
 
|10
 
|10
|SF-32UY/TQ1, SF-32UY/TQMN (40 MB/s)
+
|Ultra microSDHC I UHS-I
|Works with archlinux-hf-2013-02-11 (also after full update) - as of 04-08-2013)
+
|man:0x000003 oem:0x5344 name:SU16G hwrev:0x8 fwrev:0x0. Works again since raspberrypi-firmware 20130116 in archlinux-arm. write 6.8 MB/s, read 21.0 MB/s
|Tigran 09 April 2013
+
|fiodschi, 19 Jan 2013
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Sony
+
|SanDisk
|SDHC
+
|microSDHC
|32
+
|16
 +
|10
 +
|SDSQXNE-016G-GN6MA
 +
|man:0x000003 oem:0x5344 name:SE16G hwrev:0x8 fwrev:0x0
 +
|DUBWiSE, 3 Dec 2015
 +
|-
 +
|style='background-color:#c00;'| nok
 +
|SanDisk
 +
|microSDHC
 +
|16
 
|10
 
|10
|SF-32UY/TQ1, UHS-I (40 MB/s)
+
|SDSQXNE-016G-GNFMA
|Works with Raspbmc, OpenELEC (Frodo and Gotham test builds), and NOOBS.
+
|man:0x000003 oem:0x5344 name:SE16G hwrev:0x8 fwrev:0x0, does not work reliably, filesystem cannot be accessed, hangs.
Tested throughput:
+
|jasiek, 5 Jan 2016
Seq Read: 87.2MB/sec
+
 
Seq Write: 20.4MB/sec
 
Random Read: 78.3MB/sec
 
Random Write: 19.9MB/sec
 
|JoeSchmuck 13 July 2013
 
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Sony
+
|SanDisk
|Micro SDHC
+
|microSDHC
|32
+
|16
 
|10
 
|10
|SR32UYA/TQMN
+
|SDSQUNB-016G-GN3MN
|
+
|UHS-I; Works great on Raspberry Pi 2 model B with Raspbian Jessie 2016-02-26; man:0x000003 oem:0x5054 name:SL16G hwrev:0x3 fwrev:0x0
|Spec 8 Jan 2014
+
|KMS, 15 March 2016
 +
 
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Strontium
+
|SanDisk
|SDHC
+
|microSDHC
|8
+
|32
 
|10
 
|10
|SD-T08G 1045 US6923 G (White Shell - SKU 8 886450 703492)
+
|SDSDQUAN-032G-G4A
 +
|UHS-I; Works great on Raspberry Pi 2 model B with Raspbian [2015-05-05] Wheezy and with Ubuntu MATE 15.04 desktop
 +
|Artemko, 28 July 2015
 +
|-
 +
|style='background-color:#0a0;'| ok
 +
|SanDisk
 +
|microSDHC
 +
|32
 +
|4
 +
|
 
|
 
|
|Ssb 25 Jul 2012
+
|Sherman 19 Jul 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Super Talent
+
|SanDisk
|SDHC
+
|microSDHC
 
|32
 
|32
 
|10
 
|10
|SDHC32-C10 SKU: 116-557-001
+
|SDSDQU-032G-U46A
|works with Raspbmc RC4 and 2012-07-15-wheezy-raspbian
+
|archlinux-hf-2013-02-11
|Drroller 14 Aug 2012
+
|pAIgn10 6 Jun 2013
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|TakeMS
+
|SanDisk
 
|microSDHC
 
|microSDHC
|4
+
|32
|4
+
|10
|
+
|SDSDQUAN-032G-C4A Ultra SDHC UHS-I
|with TakeMS adapter
+
|RPi ModelB, raspbian wheezy 3.18.5 2015-01-30
|Delboy0 31 May 2012
+
|Developer 2015-02-12
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|TakeMS
+
|SanDisk
|SDHC
+
|microSDHC
|16
+
|32
|6
+
|10
|
+
|SDSDQXN-032G-FFPA
|Tested on raspbmc - works with no problems
+
|RPi Model B+, raspbian-wheezy-2014-12-24
|swidzi 25 October 2014
+
man:0x000003 oem:0x5344 hwrev:0x8 fwrev:0x0
 +
|rico 31 Dec 2014
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|TakeMS
+
|SanDisk
|SDXC
+
|microSDHC
|64
+
|32
 
|10
 
|10
|
+
|Ultra SDSDQUIN-032G-G4
|overclock turbo model B works
+
|RPi 2 Model B, 4.1.7-v7+
|select 02 June 2013
+
man:0x000003 oem:0x5344 name:SL32G hwrev:0x8 fwrev:0x0
 +
|Dingles 13 October 2015
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|TDK
+
|SanDisk
|SDHC
+
|microSDHC
|4
+
|32
|4
+
|U3
|1008WW5261B
+
|Extreme SDSQXVF-032G-CN6MA
|
+
|RPi 3 Model B, 2016-11-25-raspbian-jessie.img
|Pluggster 17 May 2012
+
|Colinng 2017-01-09
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|TDK
+
|SanDisk
|SDHC
+
|microSDXC
|2 x 4
+
|64
|4
+
|6
|80-56-10275-004G
+
|SDSDQY-064G-A11A
|Debian works, mmc0 errors when booting Fedora
+
|boots up much more consistently with latest firmware
|Melikescheese 27 May 2012
+
|LastSilmaril 23 May 2012
 
|-
 
|-
|style='background-color:#0a0;'| ok
+
|style='background-color:#c00;'| nok
|TDK
+
|SanDisk
|SDHC
+
|microSDXC
|4
+
|64
|6
+
|10
|S404G1113
+
|SDSQUNC-064G-GN6IA
|Works with Debian Wheezy (2012-06-18 beta)
+
|Failed to boot NOOBS on RPi2 or RPi3
|Dcuk 26 Jun 2012
+
|michthom 25 Sep 2016
 
|-
 
|-
 
|style='background-color:#c00;'| nok
 
|style='background-color:#c00;'| nok
|TDK
+
|SanDisk
|SDHC
+
|microSDXC
|4
+
|64
|6
+
|10
|S404G1041, S404G1046
+
|SDSQUNC-064G-GC4A
|end May 2012, new kernel.img and start.elf, won't run init. 4 Jun 2012, debian6-19-04-2012.img, replacement kernel.img and start.elf from github. Got Error -84 and Kernel panic - not syncing: No init found
+
|Failed to boot NOOBS on RPi2 or RPi3
|Ceptimus 2 Jun 2012, Norbini 4 Jun 2012
+
|michthom 01 Oct 2016
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|TDK
+
|SanDisk
|microSDHC
+
|microSDXC
|4
+
|64
|4
 
|with Adapter (80-56-10301-004G)
 
|
 
|Norbini 4 Jun 2012
 
|-
 
|style='background-color:#0a0;'| ok
 
|TDK
 
|microSDHC
 
|8
 
 
|10
 
|10
|
+
|SDSQUNC-064G-GN6MA
|Works with Raspbian 2012-07-15
+
|tested on Raspberry Pi 2
|Backeby 20 Jul 2012
+
|gvanvoor 26 Dec 2015
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|TOPRAM
+
|SanDisk
|SDHC
+
|microSDXC
|8
+
|64
|6
+
|U3
|TRSD8GC6
+
|SDSQXVF-064G-CN6MA
|Works with OpenELEC (Frodo and Gotham test builds), did not test on anything else yet.
+
|RPi 3 Model B, 2016-11-25-raspbian-jessie.img
Tested throughput:
+
|Colinng 2017-01-08
Seq Read: 43.9MB/sec
 
 
 
Seq Write: 18.8MB/sec
 
Random Read: 41.8MB/sec
 
Random Write: 17.6MB/sec
 
|JoeSchmuck 13 July 2013
 
 
|-
 
|-
 
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Toshiba
+
|SanDisk
|SDHC
+
|microSDXC
|4
+
|128
|4
+
|10
|SD-K04G(1201 W12338 N) (labelled as Fujifilm SHDC 4GB class 4)
+
|Write: 10.6 MB/s, Read: 18.6 MB/s, man:0x000003 oem:0x5344 name:SL128 hwrev:0x8 fwrev:0x0
|Tested with Raspbian 2013-11-18. Speed is 5MB/s write (1GB file)
+
|Works with Raspbian on Model B+
|captaindangeax 18 nov 2013
+
|Mstu 23 Nov 2014
 
|-
 
|-
 
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Toshiba
+
|SanDisk
|SDHC
+
|microSDXC
|8
+
|128
|4
+
|10
|SD-K08G(1223 W17218 P)
+
|SDSQUNC-128G-GN6MA
|Tested with Raspbian 2012-12-16. Speed is 4MB/s write
+
|Works great on a Raspberry Pi 3 B+ with "2016-11-25 Raspbian Jessie"<br />
|rendyair 16 Jan 2013
+
Mac OS 10.11.6 used to erase card and flash system. The Rasbian expand utility worked perfectly to resize partition to fill the card<br />
 +
SanDisk Ultra 128GB microSDXC UHS-I Card (SDSQUNC-128G-GN6MA)<br />
 +
man:0x000003 oem:0x5344 name:SL128 hwrev:0x8 fwrev:0x0
 +
|McYukon 2016 12 13
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Toshiba
+
|SanDisk
|SDHC
+
|microSDXC
|8
+
|256
 
|10
 
|10
|PFS008U-1DCK (6/13)
+
|SDSQUAR-256G-GN6MA
|Tested with Raspbian.
+
|Works on a Raspberry Pi 3 with Volumio. Had problems getting it to boot when writing the image with dd - used Rufus on Windows in the end.<br />
|Rellermeyer 25 Sep 2014
+
SanDisk Ultra 256GB microSDXC UHS-I Card (SDSQUAR-256G-GN6MA)
 +
|sam_strachan 2019 07 05
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Toshiba
+
|SanDisk
|SDHC
+
|microSDHC
 
|16
 
|16
 
|10
 
|10
|SD-T16G(1046 US7022 C)
+
|SDSDQED-016G-XI
|
+
|Sandisk Industrial XI<br/>
|Yang 5 Sep 2012
+
Raspberry Pi 3 B <br/>
 +
Linux raspberrypi 4.14.79-v7+ #1159 SMP Sun Nov 4 17:50:20 GMT 2018 armv7l GNU/Linux<br/>
 +
man:0x000003 oem:0x5344 name:WD16G hwrev:0x8 fwrev:0x0
 +
|dhbmarcos 18 Jan 2021
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Toshiba
+
|SanDisk
|SDHC
+
|microSDXC
|32
+
|64
 
|10
 
|10
|SD-K032GR7AR30 (30MB/s)
+
|SDSDQED-064G-XI
|Works with NOOBS.
+
|Sandisk Industrial XI<br/>
|OTHMAN 2014.02.14
+
Raspberry Pi 3 B <br/>
 +
Linux sitradinbox 4.14.79-v7+ #1159 SMP Sun Nov 4 17:50:20 GMT 2018 armv7l GNU/Linux<br/>
 +
man:0x000003 oem:0x5344 name:WD64G hwrev:0x8 fwrev:0x0
 +
|dhbmarcos 30 Mar 2021
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Toshiba
+
|SCT
|microSDHC
+
|SDXC
|4
+
|64
|4
+
|10
|SDC04G
+
|STC SM649A-130125
|with adapter - NOOBS v.1.3.4 cannot install the OS on the card but applying a OS image directly is working perfectly
+
|2013-02-09-wheezy-raspbian.img, booted cleanly, installed LibreOffice OK
|elapdre 16 April 2014
+
|Lanulos 29 Mar 2013
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Toshiba
+
|Silicon Power
|microSDHC
+
|SDHC
 
|8
 
|8
|?
+
|10
|SD-C08GJ(BL3A)
+
|SP008GBSDH010V10
|with adapter
+
|Works fine 2012-12-16-wheezy-raspbian.img - Tested 14/01/2013
|Jannis 15 May 2012
+
|Thenix 14 Jan 2013
 
|-
 
|-
|style='background-color:#0a0;'| ok
+
|style='background-color:#c00;'| nok
|Toshiba
+
|Silicon Power
|microSDHC
+
|SDHC
 
|8
 
|8
|4
+
|10
|PFM008U-1DAK
+
|SP008GBSDH010V10
|works with openelec
+
|Boots kernel but won't run init (mmc timeout waiting for interrupt ) - Tested 20/11/2012, 2012-10-28-wheezy-raspbian.img with Nov 20 kernel
|akschu 26 Oct 2014
+
|Xthexder 21 Nov 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Toshiba
+
|Silicon Power
|microSDHC
+
|SDHC
 
|16
 
|16
|10
+
|6
|SD-C016UHS1BL5A
+
|SP016GBSDH006V10
|with adapter
+
|
|wombalton 25 March 2014
+
|Valery 05 Apr 2013
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Toshiba
+
|Silicon Power
|microSDHC
+
|SDHC
|32
+
|16
 
|10
 
|10
|SD-C032UHS1BL5A
+
|SP016GBSDH010V10
|man:0x000002 oem:0x544d name:SA32G hwrev:0x1 fwrev:0x2 - Tested on A+ and B+
+
|
|bpmurray 14 Jan 2015
+
|Xthexder 21 Nov 2012
 
|-
 
|-
 
|style='background-color:#c00;'| nok
 
|style='background-color:#c00;'| nok
|Transcend
+
|Silicon Power
|SD
 
|2
 
|?
 
|6451AG 2G O2DS1
 
|
 
|MaWe 13 Aug 2012
 
|-
 
|style='background-color:#0a0;'| ok
 
|Transcend
 
 
|SDHC
 
|SDHC
|4
+
|32
|4
+
|6
|TS4GSDHC4 - BH1130821915G
+
|LS2N732GQON03ASP
| we've found these to work without any errors and offer reasonable performance
+
|boots debian6-19-04-2012.img, but frequent slow response / system hangs
|RasMyra 12 Apr 2012
+
|Michthom 21 Jun 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Transcend
+
|Silicon Power
|SDHC
+
|microSDHC
 
|4
 
|4
 
|6
 
|6
|TS4GSDHC6
+
|SP004GBSTH006V10-SP
|no problems (does not work with Raspbmc as of 1 Jun 2012 - 321liftoff)
+
|
|LakesGeek 23 Apr 2012
+
|Csgabe 19 May 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Transcend
+
|Silicon Power
|SDHC
+
|microSDHC
|4
+
|8
 
|10
 
|10
|TS4GSDHC10
+
|S608G1202
|Works fine running Raspbian and OpenELEC. Tested various cards from different batches.
+
|
|Kiwisol 27 Oct 2013
+
|Blutme 17 Aug 2012
 
|-
 
|-
|style='background-color:#c00;'| nok
+
|style='background-color:#0a0;'| ok
|Transcend
+
|Silicon Power
|SDHC
+
|MicroSDHC
|4
+
|8
 +
|10
 +
|SP008GBSTH010V10SP
 +
| Read:15.7 MB/s Write:5.5 MB/s, (man:0x000082 oem:0x4a54 name:NCard hwrev:0x0 fwrev:0x2)
 +
|Thu 01 Jan 2015
 +
|-
 +
|style='background-color:#0a0;'| ok
 +
|Silicon Power
 +
|microSDHC
 +
|16
 
|10
 
|10
|TS4GSDHC10E, TS4GSDHC10
+
|SP016GBSDH010V10
|Corrupted when card image back up made
+
|
mmc0: resetting ongoing cmd 25dma before 4096/4096 [1]/[1] complete
+
|Jamesnine 10 Jun 2012
mmc0: Timeout waiting for hardware interrupt - cmd12
 
mmcblk0: error -110 sending stop comment, original cmd response 0x900, card status 0xe00
 
|Mfg 3 Jun 2012, Thenix 14 Jan 2013, Fazz 04 Oct 2013
 
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Transcend
+
|Silicon Power
|SDHC
+
|microSDXC
|8
+
|64
 
|10
 
|10
|TS8GSDHC10E
+
|SP064GBSTXBU1V20SP
|man:0x00001b oem:0x534d name:00000 hwrev:0x1 fwrev:0x0
+
|Tested with retropie. Worked when using Win32DiskImager with retropie image.
| jmarin 22 April 2013
+
|Jwrasp 15 May 2017
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Transcend
+
|Sony
 
|SDHC
 
|SDHC
|8
 
 
|4
 
|4
|TS8GSDHC4
+
|4
|(man:0x000003 oem:0x5344 name:SD08G hwrev:0x8 fwrev:0x0) - works with both Debian "squeezy" and Raspbian "wheezy" distributions (Hedj)
+
|SF-4B4, SF-4N4
|Attila.afra 25 Apr 2012, Hedj 24 Jul 2012
+
|(Write 6MB/s, Read 20MB/s)
 +
|Krischaplin 7 May 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Transcend
+
|Sony
 +
|SDHC
 +
|4
 +
|10
 +
|UHS-1 40MB/s SF-4UY man:0x000027 oem:0x5048 name:SD04G hwrev:0x3 fwrev:0x0
 +
|Perfect with Raspbian. With openELEC I get warnings in the logs (mmc0: DMA IRQ 6 ignored - results were reset - mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignoring it) (Write 10,3MB/s, Read 18,8MB/s)
 +
|Knopfler19 20 Jun 2013
 +
|-
 +
|style='background-color:#0a0;'| ok
 +
|Sony
 
|SDHC
 
|SDHC
 
|8
 
|8
|6
+
|4
|TS8GSDHC6-P2 - MMBFG08GWACA-M6
+
|
|~5.8 MB/s read/write following the Performance below
+
|(Write 11.8MB/s, Read 17.4MB/s)
|Md84419 5 Nov 2011
+
|Slabua 9 Aug 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Transcend
+
|Sony
 
|SDHC
 
|SDHC
 
|8
 
|8
 
|10
 
|10
|TS8GSDHC10
+
|UHS-1 SF8UX
|
+
|Write 17.2 MB/s, Read 20.8 MB/s, Raspbian works while image copied using windows
|Selsinork 26 Apr 2012
+
|Regi24 29 Dec 2012, Hariram April 12, 2013, Hareesh G S June 6, 2013 (Openelec Image)
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Transcend
+
|Sony
 
|SDHC
 
|SDHC
 
|8
 
|8
 
|10
 
|10
|TS8GSDU1 UHC-I X300
+
|UHS-1 90MB/s SF-8UX man:0x000082 oem:0x4a54 name:NCard hwrev:0x0 fwrev:0x0
|Arch read/write 20,9/13,1 MB/s
+
|Perfect with Raspbian. With openELEC I get warnings in the logs (mmc0: DMA IRQ 6 ignored - results were reset - mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignoring it) (Write 16,9 MB/s, Read 21,1 MB/s)
|30 Aug 2013
+
|Knopfler19 20 Jun 2013
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Transcend
+
|Sony
 
|SDHC
 
|SDHC
 
|8
 
|8
 
|10
 
|10
|TS8GSDHC10U1 UHC-I X600
+
|UHS-I SF-8UY/TQ1 man:0x000082 oem:0x4a54 name:NCard hwrev:0x0 fwrev:0x2
|Arch read/write 21,1/15 MB/s
+
|Works fine with Raspbian. (Write 13.37 MB/s, Read 20.93 MB/s)
|30 Aug 2013
+
|c5jirzex52xx, 18 Nov 2013
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Transcend
+
|Sony
 
|SDHC
 
|SDHC
 
|16
 
|16
|4
+
|10
|TS16GSDHC4
+
|UHS-1
|Tested with Raspbian 2014-12-30
+
|Works well with Raspian.
|Fmondada 2 Jan 2014
+
|Bafeigum 23 Aug 2013; DBlessing 12 Mar 2014 (Confirmed)
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Transcend
+
|Sony
 
|SDHC
 
|SDHC
|16
+
|32
|6
+
|10
|TS16GSDHC6
+
|SF-32NX/TQ
|
+
|Max read speed of ~94 MB/s, min write speed of ~10 MB/s) - Works with archlinuxarm-29-04-2012 dd image with latest firmware update (as of 10-06-2012)
|Bullace 18 May 2012
+
|Chbg 13 Jun 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Transcend
+
|Sony
 
|SDHC
 
|SDHC
|16
+
|32
 
|10
 
|10
|TS16GSDHC10 / TS16GSDHC10E
+
|SF-32UY/TQ1, SF-32UY/TQMN (40 MB/s)
|
+
|Works with archlinux-hf-2013-02-11 (also after full update) - as of 04-08-2013)
|Rew 18 Apr 2012
+
|Tigran 09 April 2013
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Transcend
+
|Sony
 
|SDHC
 
|SDHC
|16
+
|32
 
|10
 
|10
|TS16GSDHC10 / TS16GSDHC10E
+
|SF-32UY/TQ1, UHS-I (40 MB/s)
| Read:18.4 MB/s Write:12.1 MB/s (man:0x000074 oem:0x4a45 name:SDC  hwrev:0x0 fwrev:0x2)
+
|Works with Raspbmc, OpenELEC (Frodo and Gotham test builds), and NOOBS.
|Sam2 01 Feb 2014
+
Tested throughput:
 +
Seq Read: 87.2MB/sec
 +
Seq Write: 20.4MB/sec
 +
Random Read: 78.3MB/sec
 +
Random Write: 19.9MB/sec
 +
|JoeSchmuck 13 July 2013
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Transcend
+
|Sony
|SDHC
+
|Micro SDHC
 +
|32
 +
|10
 +
|SR32UYA/TQMN
 +
|
 +
|Spec 8 Jan 2014
 +
|-
 +
|style='background-color:#0a0;'| ok
 +
|Sony
 +
|Micro SDHC
 
|16
 
|16
 
|10
 
|10
|TS16GSDU1
+
|SR-16UYA
| Read:18.4 MB/s Write:12.1 MB/s, (man:0x000074 oem:0x4a45 name:SDU1  hwrev:0x0 fwrev:0x2)
+
|2015-02-16-raspbian on Rapsberry Pi 2
|Sam2 01 Feb 2014
+
|korovamilk 24 April 2015
 +
|-
 +
|style='background-color:#0a0;'| ok
 +
|Sony
 +
|Micro SDXC
 +
|64
 +
|10
 +
|SR-64UY
 +
|2015-02-16-raspbian
 +
|map7 02/03/2015
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Transcend
+
|Sony
|SDHC
+
|Micro SDXC
|16
+
|64
 
|10
 
|10
|TS16GSDHC10 9173BA-16G-09DS2
+
|SR-64UY2A/TQ
| works
+
|Raspberry Pi 3 Model B - man:0x00009c oem:0x534f name:USD00 hwrev:0x0 fwrev:0x2
|Epa 20130304. package had "83-3432 V5.1" behind it.
+
|Spec 27 Aug 2016
 
|-
 
|-
|style='background-color:#c00;'| nok
+
|style='background-color:#0a0;'| ok
|Transcend
+
|Strontium
 
|SDHC
 
|SDHC
|16
+
|8
 
|10
 
|10
|TS16GSDHC10U1
+
|SD-T08G 1045 US6923 G (White Shell - SKU 8 886450 703492)
|Doesn't Boot, show that "kernel panic - not syncing attempted to kill init"
+
|
|Khfung02 13 Sep 2012
+
|Ssb 25 Jul 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Transcend
+
|Super Talent
 
|SDHC
 
|SDHC
|16
+
|32
|10 UHS-1
+
|10
|TS16GSDHC10U1
+
|SDHC32-C10 SKU: 116-557-001
|Works with Occidentals 0.2 from Adafruit, read and write about 15 MB/s, didn't test other versions.
+
|works with Raspbmc RC4 and 2012-07-15-wheezy-raspbian
|aevh 18 Feb 2013
+
|Drroller 14 Aug 2012
 
|-
 
|-
|style='background-color:#c00;'| nok
+
|style='background-color:#0a0;'| ok
|Transcend
+
|TakeMS
|SDHC
+
|microSDHC
|32
+
|4
|6
+
|4
|TS32GSDHC6-P2
+
|
|Was not recognized by 1/2 rsp B, switched to read only after 1 year, man:0x000074 oem:0x4a45 name:SDC  hwrev:0x1 fwrev:0x0
+
|with TakeMS adapter
|hypnotoad 30 Mar 2014
+
|Delboy0 31 May 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Transcend
+
|TakeMS
 
|SDHC
 
|SDHC
|32
+
|16
|10
+
|6
|TS32GSDHC10, TS32GSDHC10E
 
 
|
 
|
|Vakya 29 May 2012
+
|Tested on raspbmc - works with no problems
 +
|swidzi 25 October 2014
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Transcend
+
|TakeMS
 
|SDXC
 
|SDXC
 
|64
 
|64
 
|10
 
|10
|TS64GSDXC10
 
 
|
 
|
|Country 26 Jun 2012
+
|overclock turbo model B works
 +
|select 02 June 2013
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Transcend
+
|TDK
|SDXC
+
|SDHC
|128
+
|4
|10 UHS-I
+
|4
|TS128GSDXC10U1
+
|1008WW5261B
|Works with openSUSE
 
|petrmatula 8 Mar 2014
 
|-
 
|style='background-color:#c00;'| nok
 
|Transcend
 
|microSDHC
 
|2
 
|?
 
|MMAGR02GUECA-MB
 
|reads fine initially after image was written on a PC, gives mmc0 timeout errors reading back data after writing a large amount (in this case with 'pacman -Syu').  Still seems to work, but is *very* slow after this happens, even across reboots
 
|Malvineous 16 Jun 2012
 
|-
 
|style='background-color:#0a0;'| ok
 
|Transcend
 
|microSDHC
 
|8
 
|10
 
|TS8GUSDHC10
 
 
|
 
|
| Za Bullet 18 May 2013
+
|Pluggster 17 May 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Transcend
+
|TDK
|microSDHC
+
|SDHC
|8
+
|2 x 4
|10
+
|4
|TS8GUSDU1
+
|80-56-10275-004G
|Works with 2014-06-20-wheezy-raspbian
+
|Debian works, mmc0 errors when booting Fedora
Works with RaspBMC in RPi Model B+
+
|Melikescheese 27 May 2012
|Elf98 15 Aug 2014
 
javierrgz 3 Sep 2014
 
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Transcend
+
|TDK
 +
|SDHC
 +
|4
 +
|6
 +
|S404G1113
 +
|Works with Debian Wheezy (2012-06-18 beta)
 +
|Dcuk 26 Jun 2012
 +
|-
 +
|style='background-color:#c00;'| nok
 +
|TDK
 +
|SDHC
 +
|4
 +
|6
 +
|S404G1041, S404G1046
 +
|end May 2012, new kernel.img and start.elf, won't run init. 4 Jun 2012, debian6-19-04-2012.img, replacement kernel.img and start.elf from github. Got Error -84 and Kernel panic - not syncing: No init found
 +
|Ceptimus 2 Jun 2012, Norbini 4 Jun 2012
 +
|-
 +
|style='background-color:#0a0;'| ok
 +
|TDK
 
|microSDHC
 
|microSDHC
|16
+
|4
|10
+
|4
|TS16GUSDU1
+
|with Adapter (80-56-10301-004G)
|Raspberry Pi B+ Model (tested on OpenELEC,xbian, raspbmc, kali linux)
+
|
|@xhark 05 Oct 2014
+
|Norbini 4 Jun 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Transcend
+
|TDK
 
|microSDHC
 
|microSDHC
|16
+
|8
 
|10
 
|10
|TS16GUSDU1
+
|
|Works with 2014-06-20-wheezy-raspbian
+
|Works with Raspbian 2012-07-15
|Elf98 15 Aug 2014
+
|Backeby 20 Jul 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Transcend
+
|Team
|microSDHC
+
|MicroSDHC
 
|32
 
|32
 
|10
 
|10
|TS32GUSDU1
+
|
|Works with 2013-02-09-wheezy-raspbian
+
|Raspberry Pi 2 Model B
|Neurolit 15 Apr 2013
+
|Riverstyxxx 7 Feb 2015
 
|-
 
|-
|style='background-color:#c00;'| nok
+
|style='background-color:#0a0;'| ok
|Transcend
+
|Team
|microSDHC
+
|MicroSDHC
|32
 
|?
 
|TS32GUSDHC4
 
|Doesn't boot
 
|Piponazo 7 Aug 2012
 
|-
 
|style='background-color:#c00;'| nok
 
|Transcend
 
|microSDHC
 
 
|32
 
|32
 
|10
 
|10
|TS32GUSDHC10
+
|TG032G0MC28A
|(man:0x00001b oem:0x534d name:00000 hwrev:0x1 fwrev:0x0), with microSD to SD adapter, boots, (mmc0: timeout waiting for hardware interrupt, followed by continuous I/O errors, timeouts, etc), 2013-02-09-wheezy-raspbian
+
|Raspberry Pi 2 Model B
|Bernard Ladenthin 12 Mar 2013
+
|gdl 18 Apr 2015
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Transcend
+
|TOPRAM
|microSDXC
+
|SDHC
|64
+
|8
|10
+
|6
|TS64GUSDU1E
+
|TRSD8GC6
|Raspberry Pi B+ Model (tested with ARM Arch Linux)
+
|Works with OpenELEC (Frodo and Gotham test builds), did not test on anything else yet.
|fluxon 28 Oct 2014
+
Tested throughput:
 +
Seq Read: 43.9MB/sec
 +
 
 +
Seq Write: 18.8MB/sec
 +
Random Read: 41.8MB/sec
 +
Random Write: 17.6MB/sec
 +
|JoeSchmuck 13 July 2013
 
|-
 
|-
 +
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Traveller
+
|Toshiba
 
|SDHC
 
|SDHC
 
|4
 
|4
|?
+
|4
|High Speed
+
|SD-K04G(1201 W12338 N) (labelled as Fujifilm SHDC 4GB class 4)
|Works with raspbian
+
|Tested with Raspbian 2013-11-18. Speed is 5MB/s write (1GB file)
|Sega dude 28 Jul 2012
+
|captaindangeax 18 nov 2013
 
|-
 
|-
 +
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|V-Gen
+
|Toshiba
|microSDHC
+
|SDHC
 
|8
 
|8
|?
 
|
 
|No problems.(man:0x000073 oem:0x4247 name:NCard hwrev:0x1 fwrev:0x0). Tested with Raspbian Wheezy & Raspbmc
 
|Rendyair 11 Sep 2012
 
|-
 
|style='background-color:#c00;'| nok
 
|Veho
 
|SDHC
 
 
|4
 
|4
|6
+
|SD-K08G(1223 W17218 P)
|
+
|Tested with Raspbian 2012-12-16. Speed is 4MB/s write
|
+
|rendyair 16 Jan 2013
|Spaaa 5 Jun 2012
 
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Veho
+
|Toshiba
 
|SDHC
 
|SDHC
 
|8
 
|8
|6
+
|10
|Ultra fast
+
|PFS008U-1DCK (6/13)
|(man:0x00001b oem:0x534d name:00000 hwrev:0x1 fwrev:0x0) 7.8Mb/s. Slow but tested with Arch Linux
+
|Tested with Raspbian.
|Johnlane 28 Jul 2012
+
|Rellermeyer 25 Sep 2014
|-
 
|style='background-color:#c00;'| nok
 
|Verbatim
 
|SDHC
 
|8
 
|6
 
|Go
 
|tested with NOOBS 1.3.2 and Raspbian Wheezy 2013-09-25; mmc0: timeout waiting for hardware interrupt
 
|marcel.kolaja 12 Dec, 2013
 
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Verbatim
+
|Toshiba
 
|SDHC
 
|SDHC
|8
+
|16
 
|10
 
|10
|43961
+
|SD-T16G(1046 US7022 C)
 
|
 
|
|Petacz 13 Aug 2012
+
|Yang 5 Sep 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Verbatim
+
|Toshiba
 
|SDHC
 
|SDHC
|8
+
|32
 
|10
 
|10
|Premium
+
|SD-K032GR7AR30 (30MB/s)
|Tested with 2013-02-09 release of Raspbian Wheezy and Rasplex 0.1.37 - blue plastic version
+
|Works with NOOBS.
|Jahislove 11 may 2013
+
|OTHMAN 2014.02.14
 
|-
 
|-
|style='background-color:#c00;'| nok
+
|style='background-color:#0a0;'| ok
|Verbatim
+
|Toshiba
|SDHC
+
|microSDHC
|8
+
|4
|10
+
|4
|Premium PSF8GSDHC10-PC
+
|SDC04G
|Tested with September release of Raspbian and Debian Wheezy - both fail to boot with mmc errors, confirmed fail with this black plastic version (may 2013)
+
|with adapter - NOOBS v.1.3.4 cannot install the OS on the card but applying a OS image directly is working perfectly
|XQx 31 Oct 2012 , confirmed Jahislove 11 may 2013
+
|elapdre 16 April 2014
 
|-
 
|-
|style='background-color:#c00;'| nok
+
|style='background-color:#0a0;'| ok
|Verbatim
+
|Toshiba
|SDHC
+
|microSDHC
 
|8
 
|8
|10
+
|?
|43961
+
|SD-C08GJ(BL3A)
|Raspbian - installs it but doesn't boot, repeatedly prints: 'timeout waiting for hardware interrupt'
+
|with adapter
|Gkontadakis 31 Aug 2013
+
|Jannis 15 May 2012
|-
+
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Verbatim
+
|Toshiba
|SDHC
+
|microSDHC
|16
+
|8
 
|4
 
|4
|44020
+
|PFM008U-1DAK
|
+
|works with openelec
|Adelahunty 22 Nov 2012
+
|akschu 26 Oct 2014
 +
|-
 +
|style='background-color:#0a0;'| ok
 +
|Toshiba
 +
|microSDHC
 +
|8
 +
|10
 +
|[http://www.toshiba.de/flash-memory/microsd-cards/high-speed-professional/sd-c008uhs1%286a/ SD-C008UHS1(6A]
 +
|Raspbian 3.18 - Raspberry Pi 2<br />man:0x000002 oem:0x544d name:SE08G hwrev:0x2 fwrev:0x2 - [https://snippet.host/pddp flash-bench results]
 +
|penkd 2015-06-19
 
|-
 
|-
|style='background-color:#c00;'| nok
+
|style='background-color:#0a0;'| ok
|Verbatim
+
|Toshiba
|SDHC
+
|microSDHC
 
|16
 
|16
|6
+
|4
|47178
+
|[http://www.toshiba.de/flash-memory/microsd-cards/high-speed-standard/sd-c16gj%286a/ SD-C16GJ(6A]
|Raspbian Pisces RC3 - boots, but after login: mmc timeout waiting for interrupt
+
|Raspbian 3.18 - Raspberry Pi 2<br />man:0x000002 oem:0x544d name:SA16G hwrev:0x1 fwrev:0x4 - [https://snippet.host/xdmk flash-bench results]
|Razzda 15 Jul 2012
+
|penkd 2015-06-19
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Verbatim
+
|Toshiba
|SDHC
+
|microSDHC
 
|16
 
|16
 
|10
 
|10
|43962
+
|SD-C016UHS1BL5A
|
+
|with adapter
|Klass 24 Jun 2012
+
|wombalton 25 March 2014
|-
 
|style='background-color:#c00;'| nok
 
|Verbatim
 
|SDHC
 
|16
 
|10
 
|13762
 
|mmc timeout
 
|Epa 20130304
 
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Verbatim
+
|Toshiba
|SDHC
+
|microSDHC
 
|32
 
|32
|6
+
|4
|44032
+
|SD-C32GJ-BL5A
|
+
|Work fine on Raspberry Pi 2
|Jarip 14 Jul 2012
+
|cja2015 31 March 2015
 
|-
 
|-
|style='background-color:#c00;'| nok
+
|style='background-color:#0a0;'| ok
|Verbatim
+
|Toshiba
 
|microSDHC
 
|microSDHC
|8
+
|32
 
|10
 
|10
|44012
+
|SD-C032UHS1BL5A
|ArchLinux - boots, but after system update develops segmentation faults
+
|man:0x000002 oem:0x544d name:SA32G hwrev:0x1 fwrev:0x2 - Tested on A+ and B+
|John.glasson 29 Jul 2012
+
|bpmurray 14 Jan 2015
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Verbatim
+
|Toshiba
 
|microSDHC
 
|microSDHC
|16
+
|64
|4
+
|10
|
+
|SD-C064GR7AR30
|Tested with 2013-02-09-wheezy-raspbian - works without any problem
+
|Tested 2015-02-16-raspbian on Pi2
|J3rGuS 19 March 2013
+
|map7 02/03/2015
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Walgreens Photo
+
|Toshiba
|SD
+
|MicroSDXC
|1
+
|64
|?
+
|10
|
+
|THN-M302R0640EA
|Works with raspbmc, have not tested others
+
|Works fine with Raspberry Pi 3 + NOOBS + fresh Raspbian OS install 2017 Feb + apt get upgrade
|Sp00l 21 Jul 2012
+
|Martpart 23 Feb 2017
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Walgreens Photo
+
|Toshiba
 +
|MicroSDXC
 +
|32
 +
|10
 +
|THN-M302R0320EA
 +
|Works fine with Raspberry Pi 3 + NOOBS + fresh Raspbian OS install 2017 Feb + apt get upgrade
 +
|Martpart 23 Feb 2017
 +
|-
 +
|style='background-color:#c00;'| nok
 +
|Transcend
 
|SD
 
|SD
 
|2
 
|2
 
|?
 
|?
 +
|6451AG 2G O2DS1
 
|
 
|
|Works with raspbian, have not tested others
+
|MaWe 13 Aug 2012
|Sega dude 27 Jul 2012
+
|-
 +
|style='background-color:#0a0;'| ok
 +
|Transcend
 +
|SDHC
 +
|4
 +
|4
 +
|TS4GSDHC4 - BH1130821915G
 +
| we've found these to work without any errors and offer reasonable performance
 +
|RasMyra 12 Apr 2012
 +
|-
 +
|style='background-color:#0a0;'| ok
 +
|Transcend
 +
|SDHC
 +
|4
 +
|6
 +
|TS4GSDHC6
 +
|no problems (does not work with Raspbmc as of 1 Jun 2012 - 321liftoff)
 +
|LakesGeek 23 Apr 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Walgreens Photo
+
|Transcend
|microSDHC
+
|SDHC
|16
+
|4
 
|10
 
|10
|
+
|TS4GSDHC10
|…testing on B+…
+
|Works fine running Raspbian and OpenELEC. Tested various cards from different batches.
|[[User:DisneyWizard|DisneyWizard]] ([[User talk:DisneyWizard|talk]]) 18:00, 10 January 2015 (UTC)
+
|Kiwisol 27 Oct 2013
|}
 
 
 
== Performance ==
 
 
 
The following results have been reported by Users.
 
 
 
=== Terminal Commands ===
 
 
 
To obtain the results in the table, type the following lines at a command prompt. If you are running the GUI windows, open the Terminal application.
 
 
 
The '''dd''' command is the Linux block copy command. It reads from the '''if=''' file, in the first case a block of zeros, and writes to the '''of=''' file, in the first case the file named test.tmp in your HOME directory (the ~/ means your HOME directory). The '''bs=''' gives the size of the data, and the '''count=''' gives the number of times this is repeated. '''sync''' ensures that the filesystem cache is flushed to have more realistic data. Please run it multiple times, one sample is not scientific enough.
 
 
 
'''Write speed'''
 
 
 
sync; time dd if=/dev/zero of=~/test.tmp bs=500K count=1024; time sync
 
 
 
'''Read speed'''
 
 
 
dd if=~/test.tmp of=/dev/null bs=500K count=1024
 
 
 
'''Delete the temporary file'''
 
 
 
rm ~/test.tmp
 
 
 
'''Kernel version'''
 
 
 
uname -a
 
 
 
=== External Benchmarks ===
 
 
 
* http://www2.sakoman.com/OMAP/microsd-card-perfomance-test-results.html
 
* http://www.raspberrypi.org/phpBB3/viewtopic.php?f=2&t=4076
 
 
 
=== Is this reliable? ===
 
 
 
SD cards are given a rating (Class) by the manufacturers; the higher the rating the quicker the card. SD cards are usually used in a camera. The camera usually writes a block of data (a picture), then writes another. The SD card is tuned for this type of use. When used in the Raspberry Pi the data is written and read a lot more frequently, and from differing locations on the card. This difference in use means the
 
manufacturers rating may not be as applicable for the Raspberry Pi.
 
 
 
=== SD card performance ===
 
 
 
The table can be sorted using the triangles in the top row. Please add entries in the correct location, so that the initial sort is by Manufacturer, Size, Type and Class
 
 
 
{| border="1" class="sortable"
 
! SD Card !! Read (MB/s) !! Write (MB/s) !! class="unsortable" | Distro !! class="unsortable" | Kernel !! class="unsortable" | Notes
 
 
|-
 
|-
|ADATA 8GB SDHC Class 10 (ASDH8GCL10-R) || 19.6 || 18.8 || 2012-08-04 Debian Wheezy "Raspbian" || Linux raspberrypi 3.1.9+ #168 PREEMPT Sat Jul 14 18:56:31 BST 2012 armv6l GNU/Linux ||
+
|style='background-color:#c00;'| nok
|-
+
|Transcend
|ADATA 8GB SDHC Class 10 (ASDH8GCL10-R) || 18.2 || 12.4 || 2012-12-16 Debian Wheezy "Raspbian" || Linux raspberrypi 3.2.27+ #250 PREEMPT Thu Oct 18 19:03:02 BST 2012 armv6l GNU/Linux ||
+
|SDHC
 +
|4
 +
|10
 +
|TS4GSDHC10E, TS4GSDHC10,
 +
|Corrupted when card image back up made
 +
mmc0: resetting ongoing cmd 25dma before 4096/4096 [1]/[1] complete
 +
mmc0: Timeout waiting for hardware interrupt - cmd12
 +
mmcblk0: error -110 sending stop comment, original cmd response 0x900, card status 0xe00
 +
|Mfg 3 Jun 2012, Thenix 14 Jan 2013, Fazz 04 Oct 2013
 
|-
 
|-
|ADATA 16GB SDHC Class 10 || 19.5 || 16.9 || 2012-06-13 Arch Linux ARM || Linux alarmpi 3.2.27+ #60 PREEMPT Thu Aug 23 15:33:51 BST 2012 armv6l GNU/Linux ||
 
 
|-
 
|-
|ADATA 16GB SDHC Class 10 || 17.8 || 11.2 || Debian Wheezy "Raspbian" || Linux raspberrypi 3.10.24+ #610 PREEMPT Thu Dec 12 13:12:09 GMT 2013 armv6l GNU/Linux || man:0x00001d oem:0x4144 name:SD    hwrev:0x1 fwrev:0x0
+
|style='background-color:#0a0;'| ok
 +
|Transcend
 +
|microSDHC
 +
|16
 +
|10
 +
|TS16GUSDHC10
 +
|Tested 3 pcs with OpenELEC @ RPI2. Result: Ok!
 +
|28 January 2016, reported by MAREL
 
|-
 
|-
| ADATA 16GB SDHC Class 10 (ASDH16GUICL10-R) || 18.5 || 9.9 || archlinux-hf-2013-11-14 || Linux alarmpi 3.10.25-1-ARCH #1 PREEMPT Mon Dec 23 16:07:25 MST 2013 armv6l GNU/Linux ||
+
|style='background-color:#0a0;'| ok
 +
|Transcend
 +
|SDHC
 +
|8
 +
|10
 +
|TS8GSDHC10E
 +
|man:0x00001b oem:0x534d name:00000 hwrev:0x1 fwrev:0x0
 +
| jmarin 22 April 2013
 
|-
 
|-
| ADATA 16GB SDHC Class 10 (ASDH16GUICL10-R) || 18.4 || 16.06 || 2014-01-07-wheezy-raspbian || Linux raspberrypi 3.10.25+ #622 PREEMPT Fri Jan 3 18:41:00 GMT 2014 armv6l GNU/Linux || Fresh install
+
|style='background-color:#0a0;'| ok
 +
|Transcend
 +
|SDHC
 +
|8
 +
|4
 +
|TS8GSDHC4
 +
|(man:0x000003 oem:0x5344 name:SD08G hwrev:0x8 fwrev:0x0) - works with both Debian "squeezy" and Raspbian "wheezy" distributions (Hedj)
 +
|Attila.afra 25 Apr 2012, Hedj 24 Jul 2012
 
|-
 
|-
| ADATA 16GB SDHC Class 10 (AUSDH16GUICL10-R) || 18.6 || 12.3 || 2014-07-08-wheezy-raspbian || Linux raspberrypi 3.12.22+ #691 PREEMPT Wed Jun 18 18:29:58 BST 2014 armv6l GNU/Linux || Fresh NOOBS install + apt-get upgrade
+
|style='background-color:#0a0;'| ok
 +
|Transcend
 +
|SDHC
 +
|8
 +
|6
 +
|TS8GSDHC6-P2 - MMBFG08GWACA-M6
 +
|~5.8 MB/s read/write following the Performance below
 +
|Md84419 5 Nov 2011
 
|-
 
|-
| ADATA 16GB SDHC Class 10 (AUSDH16GUICL10-RA1) || 13.8 || 7.1 || 2014-12-24-wheezy-raspbian || Linux raspberrypi 3.12.35+ #730 PREEMPT Fri Dec 19 18:31:24 GMT 2014 armv6l GNU/Linux || Fresh Raspbian install
+
|style='background-color:#0a0;'| ok
|-
+
|Transcend
| ADATA 16GB SDHC Class 10 (AUSDH16GUICL10-RA1) || 18.8 || 9.3 || 2014-12-24-wheezy-raspbian || Linux raspberrypi 3.12.35+ #730 PREEMPT Fri Dec 19 18:31:24 GMT 2014 armv6l GNU/Linux || Fresh Raspbian install + apt-get upgrade
+
|SDHC
|-
+
|8
|ADATA 32GB SDHC Class 10 (ASDH32GCL10-R) || 20.1 || 6.4 || 2012-06-18-wheezy-beta || Linux raspberrypi 3.1.9+ #152 PREEMPT Fri Jul 6 18:47:16 BST 2012 armv6l GNU/Linux ||
+
|10
 +
|TS8GSDHC10
 +
|
 +
|Selsinork 26 Apr 2012
 
|-
 
|-
|AmazonBasics SDHC Class 10 8GB || 19.3 || 8.6 || Debian Wheezy "Raspbian" || Linux massah 3.1.9+ #168 PREEMPT Sat Jul 14 18:56:31 BST 2012 armv6l GNU/Linux ||
+
|style='background-color:#0a0;'| ok
 +
|Transcend
 +
|SDHC
 +
|8
 +
|10
 +
|TS8GSDU1 UHC-I X300
 +
|Arch read/write 20,9/13,1 MB/s
 +
|30 Aug 2013
 
|-
 
|-
|AmazonBasics SDHC Class 10 8GB || 17 || 9.4 || Debian Wheezy "Raspbian" || Linux massah 3.1.9+ #202 PREEMPT Wed Jul 25 22:11:06 BST 2012 armv6l GNU/Linux || Same board and card as above, slightly newer kernel.
+
|style='background-color:#0a0;'| ok
 +
|Transcend
 +
|SDHC
 +
|8
 +
|10
 +
|TS8GSDHC10U1 UHC-I X600
 +
|Arch read/write 21,1/15 MB/s
 +
|30 Aug 2013
 
|-
 
|-
|Emtec SDHC 8GB class 10 (EKMSD8G150XHC) || 20.3 || 14.6 || Debian Wheezy "Raspbian" || Linux raspberrypi 3.2.27+ #250 PREEMPT Thu Oct 18 19:03:02 BST 2012 armv6l GNU/Linux || Turbo mode = High (950/250/450MHz)
+
|style='background-color:#0a0;'| ok
 +
|Transcend
 +
|SDHC
 +
|16
 +
|4
 +
|TS16GSDHC4
 +
|Tested with Raspbian 2014-12-30
 +
|Fmondada 2 Jan 2014
 
|-
 
|-
|Extrememory SDHC 16GB class 10 || 4.7 || 4.5 || Debian Wheezy "Raspbian" || Linux raspbian 3.1.9+ #52 ||
+
|style='background-color:#0a0;'| ok
 +
|Transcend
 +
|SDHC
 +
|16
 +
|6
 +
|TS16GSDHC6
 +
|
 +
|Bullace 18 May 2012
 
|-
 
|-
|Extrememory SDHC 16GB class 10 || 11.3 || 5.4 || Debian Wheezy "Raspbian" || Linux raspbian 3.1.9+ #101 || init_emmc_clock=200000000 in config.txt
+
|style='background-color:#0a0;'| ok
|-
+
|Transcend
|Extrememory SDHC 16GB class 10 || 18.2 || 6.3 || Debian Wheezy "Raspbian" || Linux raspbian 3.1.9+ custom || kernel and firmware as of 17.06.2012, no extra option in config.txt
+
|SDHC
|-
+
|16
|Extrememory SDHC 16GB class 10 <br/>(man:0x000012 oem:0x3456 name:F0F0F hwrev:0x1 fwrev:0x0) || 16.9 || 10.7 || archlinuxarm-13-06-2012 || Linux alarmpi 3.1.9-25-ARCH+ #1 PREEMPT ||
+
|10
 +
|TS16GSDHC10 / TS16GSDHC10E
 +
|
 +
|Rew 18 Apr 2012
 
|-
 
|-
|Extrememory SDHC 32GB class 10 <br/>(man:0x000003 oem:0x5344 name:SMI   hwrev:0x1 fwrev:0x0) || 18.7 || 16.5 || archlinuxarm-13-06-2012 || Linux alarmpi 3.1.9-25-ARCH+ #1 PREEMPT ||
+
|style='background-color:#0a0;'| ok
 +
|Transcend
 +
|SDHC
 +
|16
 +
|10
 +
|TS16GSDHC10 / TS16GSDHC10E
 +
| Read:18.4 MB/s Write:12.1 MB/s (man:0x000074 oem:0x4a45 name:SDC   hwrev:0x0 fwrev:0x2)
 +
|Sam2 01 Feb 2014
 
|-
 
|-
|Farnell Branded (Samsung) SDHC 4GB Class 4 (MMBTF04GWBCA-ME) || 20.1 || 6.9 || Debian Wheezy Raspbian || Linux raspbian 3.1.9+ #168 || Pi overclocked to 900 Mhz arm_freq and 500 Mhz sdram_freq
+
|style='background-color:#0a0;'| ok
 +
|Transcend
 +
|SDHC
 +
|16
 +
|10
 +
|TS16GSDU1
 +
| Read:18.4 MB/s Write:12.1 MB/s, (man:0x000074 oem:0x4a45 name:SDU1  hwrev:0x0 fwrev:0x2)
 +
|Sam2 01 Feb 2014
 
|-
 
|-
|Fugi SDHC 32GB class 10 (P10NM00580A) || 12.7 || 19.8 || Debian Wheezy Raspbian || Linux raspbian 3.1.9+ #168 || man:0x000073 oem:0x4247 name:NCard hwrev:0x1 fwrev:0x0
+
|style='background-color:#0a0;'| ok
 +
|Transcend
 +
|SDHC
 +
|16
 +
|10
 +
|TS16GSDHC10 9173BA-16G-09DS2
 +
| works
 +
|Epa 20130304. package had "83-3432 V5.1" behind it.
 
|-
 
|-
|GoodRAM SDHC 16GB Pro class 10 (SDC16GHC10PGRR9) || 19.4 || 18.0 || Debian Wheezy Raspbian || Linux raspbian 3.1.9+ #272 ||
+
|style='background-color:#0a0;'| ok
 +
|Transcend
 +
|SDHC I
 +
|16
 +
|10 UHS-I
 +
|TS16GSDHC10U1? 9173BA-16G-07DS2
 +
| works
 +
|Epa 20151002. package had "83-3436 V1.2" behind it.
 
|-
 
|-
|Integral SDHC 16GB class 10 ||17.7 || 19.6 || Debian Wheezy Raspbian || Linux raspbian 3.1.9+ #168 ||
+
|style='background-color:#c00;'| nok
 +
|Transcend
 +
|SDHC
 +
|16
 +
|10
 +
|TS16GSDHC10U1
 +
|Doesn't Boot, show that "kernel panic - not syncing attempted to kill init"
 +
|Khfung02 13 Sep 2012
 
|-
 
|-
|Kingmax 8GB microSDHC Class 4 (KM08GMCSDHC41A) || 13.6 || 3.7 || Debian Wheezy Raspbian || Linux 3.1.9+ #242 PREEMPT Wed Aug 1 19:47:22 BST 2012 ||
+
|style='background-color:#0a0;'| ok
 +
|Transcend
 +
|SDHC
 +
|16
 +
|10 UHS-1
 +
|TS16GSDHC10U1
 +
|Works with Occidentals 0.2 from Adafruit, read and write about 15 MB/s, didn't test other versions.
 +
|aevh 18 Feb 2013
 
|-
 
|-
|Kingston SDHC 4GB class 4 ||4.5 ||4.1 ||Debian Squeeze "debian6-19-04-2012" ||Linux raspberrypi 3.1.9+ #52 Tue May 8 23:49:32 BST 2012 ||
+
|style='background-color:#c00;'| nok
 +
|Transcend
 +
|SDHC
 +
|32
 +
|6
 +
|TS32GSDHC6-P2
 +
|Was not recognized by 1/2 rsp B, switched to read only after 1 year, man:0x000074 oem:0x4a45 name:SDC  hwrev:0x1 fwrev:0x0
 +
|hypnotoad 30 Mar 2014
 
|-
 
|-
|Kingston SDHC 4GB class 4 ||4.2 ||2.5 ||archlinuxarm-19-04-2012 ||Linux alarmpi 3.1.9-13+ #6 Thu May 10 00:48:37 UTC 2012 ||Identical card to one above. One to look into, as I was expecting Arch to be faster...
+
|style='background-color:#0a0;'| ok
 +
|Transcend
 +
|SDHC
 +
|32
 +
|10
 +
|TS32GSDHC10, TS32GSDHC10E
 +
|
 +
|Vakya 29 May 2012
 
|-
 
|-
|Kingston uSDHC 4GB class 4 ||4.0 ||3.8 ||Debian Squeeze ||Linux 3.1.9+ #90 ||
+
|style='background-color:#c00;'| nok
 +
|Transcend
 +
|SDXC
 +
|64
 +
|10
 +
|TS64GSDXC10
 +
| OK
 +
NOK - After one week it switched to readonly. The same happened with a replacement card.
 +
|Country 26 Jun 2012
 +
Trochim 4 Mar 2014
 
|-
 
|-
|Kingston uSDHC 8GB class 4 (SDC4/8GB) ||4.7 ||3.7 ||archlinuxarm-29-04-2012 ||Linux alarmpi 3.1.9+ #66 Thu May 17 16:56:20 BST 2012 ||[http://dl.dropbox.com/u/268147/rpi/Kingston_uSD_8GB_CDM_Bench.zip CrystalDiskMark results (FAT32)] This is my only card that can be counted on to boot up on each plug-in.
+
|style='background-color:#0a0;'| ok
 +
|Transcend
 +
|SDXC
 +
|128
 +
|10 UHS-I
 +
|TS128GSDXC10U1
 +
|Works with openSUSE
 +
|petrmatula 8 Mar 2014
 
|-
 
|-
|Kingston microSDHC 8GB Class 10 || 14.5 || 8.1 || Debian Wheezy "Raspbian" || Linux Rpi 3.12.24+ #694 PREEMPT Tue Jul 15 17:34:35 BST 2014 armv6l GNU/Linux || Felon 07 Jully 2014
+
|style='background-color:#c00;'| nok
|-
+
|Transcend
|Kingston microSDHC 16GB class 4  ||17.1 ||5.1 ||2013-02-09 Debian Wheezy "Raspbian" ||Linux raspberrypi 3.6.11+ #371 PREEMPT Thu Feb 7 16:31:35 GMT 2013 armv6l GNU/Linux ||
+
|microSDHC
|-
+
|2
|Kingston microSDHC 16GB class 10 ||20.1 ||13.4 ||2013-02-09 Debian Wheezy "Raspbian" ||Linux raspberrypi 3.6.11+ #371 PREEMPT Thu Feb 7 16:31:35 GMT 2013 armv6l GNU/Linux ||
+
|?
|-
+
|MMAGR02GUECA-MB
|Kingston microSDHC 32GB class 10 ||17.9 ||10.9 ||2013-02-09 Debian Wheezy "Raspbian" ||Linux raspberrypi 3.12.22+ #691 PREEMPT Wed Jun 18 18:29:58 BST 2014 armv6l GNU/Linux ||
+
|reads fine initially after image was written on a PC, gives mmc0 timeout errors reading back data after writing a large amount (in this case with 'pacman -Syu'). Still seems to work, but is *very* slow after this happens, even across reboots
 +
|Malvineous 16 Jun 2012
 
|-
 
|-
|Kingston SDHC 8GB Class 4 (SD4/8GB) || 16.2 || 5.2 ||2013-12-20 Debian Wheezy "Raspbian" ||Linux RaspberryPi 3.10.24+ #614 PREEMPT Dec 19 20:38 GMT 2013 armv6L GNU/Linux ||
+
|style='background-color:#0a0;'| ok
 +
|Transcend
 +
|microSDHC
 +
|8
 +
|10
 +
|TS8GUSDHC10
 +
|
 +
| Za Bullet 18 May 2013
 
|-
 
|-
|Kingston SDHC 8GB class 4 (SD4/8GB) ||4.6 ||3.0 ||archlinuxarm-29-04-2012 ||Linux alarmpi 3.1.9+ #66 Thu May 17 16:56:20 BST 2012 ||[http://dl.dropbox.com/u/268147/rpi/Kingston_SD4-8GB_CDM_Bench.zip CrystalDiskMark results (FAT32)]
+
|style='background-color:#0a0;'| ok
 +
|Transcend
 +
|microSDHC
 +
|8
 +
|10
 +
|TS8GUSDU1
 +
|Works with 2014-06-20-wheezy-raspbian
 +
Works with RaspBMC in RPi Model B+; works with Raspberry Pi 2 Model B
 +
|Elf98 15 Aug 2014
 +
javierrgz 3 Sep 2014; vtarasov 9 Sep 2015
 
|-
 
|-
|Kingston SDHC 8GB class 4 (SD4/8GB) ||13.2 ||3.4 || Hexxeh Raspbian r3 ||Linux raspbian 3.1.9+ #202 PREEMPT Wed Jul 25 22:11:06 BST 2012 armv6l GNU/Linux || man:0x000002 oem:0x544d name:SA08G hwrev:0x1 fwrev:0x0
+
|style='background-color:#0a0;'| ok
 +
|Transcend
 +
|microSDHC
 +
|16
 +
|10
 +
|TS16GUSDU1
 +
|Raspberry Pi B+ Model (tested on OpenELEC,xbian, raspbmc, kali linux)
 +
|@xhark 05 Oct 2014
 
|-
 
|-
|Kingston SDHC 8GB Class 10 (SD10V/8GB) || 16.2 || 9.9 ||2013-12-20 Debian Wheezy "Raspbian" ||Linux RaspberryPi 3.10.24+ #614 PREEMPT Dec 19 20:38 GMT 2013 armv6L GNU/Linux ||
+
|style='background-color:#0a0;'| ok
 +
|Transcend
 +
|microSDHC
 +
|16
 +
|10
 +
|TS16GUSDU1
 +
|Works with 2014-06-20-wheezy-raspbian
 +
|Elf98 15 Aug 2014
 
|-
 
|-
|Kingston SDHC 32GB class 10 ||10.8 ||8.1 ||Fedora 17 ARM snapshot 07 May 2012 ||Linux fedora-arm 3.1.9 #1 ||mmc0: note - long write sync 1453000ns - 14608 its. - kernel/module problems?
+
|style='background-color:#0a0;'| ok
 +
|Transcend
 +
|microSDHC
 +
|16
 +
|10
 +
|TS16GUSDU1
 +
|Works with OSMC 2015.09-1 on Raspberry Pi 2 Model B 1GB
 +
|fernandonajera 04 Oct 2015
 
|-
 
|-
|Kingston SDHC 32GB class 10 ||4.7 ||4.1 ||Fedora 17 ARM nightly snapshot ||Linux fedora-arm 3.1.9+ #101 PREEMPT Mon Jun 4 17:19:44 BST 2012 ||custom kernel from raspberrypi github - no more mmc0 sync problems
+
|style='background-color:#0a0;'| ok
 +
|Transcend
 +
|microSDHC
 +
|16
 +
|10
 +
|TS16GUSDU1
 +
|Raspberry Pi 2 model B
 +
Linux raspberrypi 4.1.17-v7+ #838 SMP Tue Feb 9 13:15:09 GMT 2016 armv7l GNU/Linux
 +
Card info: man:0x000074 type:SD oem:0x4a60 name:USDU1 hwrev:0x1 fwrev:0x0
 +
|by faand412882 10 Feb 2016
 
|-
 
|-
|Kingston SDHC 32GB class 10 ||4.6 ||3.5 ||Debian Squeeze "debian6-19-04-2012" ||Linux raspberrypi 3.1.9+ #90 ||
+
|style='background-color:#0a0;'| ok
 +
|Transcend
 +
|microSDHC
 +
|16
 +
|10
 +
|TS16GUSDU1E
 +
|man:0x000003 oem:0x5344 name:SL16G hwrev:0x8 fwrev:0x0<br />
 +
Tested on Pi 2 Model B with Raspbian via NOOBS 1.4; More [http://skippingpebbles.com/Pi/Transcend-Class10.html Details]
 +
|FastEddie 19 Mar 2015
 
|-
 
|-
|Lexar Platinum II SDHC 8GB Class 10 UHS-I || 18.5 || 9.1 ||2013-12-20 Debian Wheezy "Raspbian" ||Linux RaspberryPi 3.10.24+ #614 PREEMPT Dec 19 20:38 GMT 2013 armv6L GNU/Linux ||
+
|style='background-color:#0a0;'| ok
 +
|Transcend
 +
|microSDHC
 +
|16
 +
|10
 +
|TS16GUSDU1E
 +
|man:0x000074 oem:0x4a60 name:USDU1 hwrev:0x0 fwrev:0x2<br />
 +
Tested on Raspbian, OpenElec, raspbx, always error -110 cannot read<br /><br />
 +
update Aug/15: OK Tested on  Pi 2 Model B  with 2015-05-05-raspbian-wheezy, kernel 4.1.6-v7+ #810 and latest firmware version 3f87086448257aa66881de858a0b4b0e6daa8719 (clean) (release),
 +
|ilijamt 20 June 2015<br />
 +
update Jaco - Aug 2015
 +
 
 
|-
 
|-
|Noname uSDHC 16GB class 4 ||18.5 ||2.6 ||Raspmc ||Linux raspbmc 3.2.27 #1 PREEMPT Mon Nov 5 20:50:02 UTC 2012 armv6l GNU/Linux ||
+
|style='background-color:#c00;'| nok
 +
|Transcend
 +
|microSDHC
 +
|16
 +
|10
 +
|TS16GUSDCU1
 +
|Tested on Pi 2 model B with Raspbian and Ubuntu mate
 +
won't even boot (mmc0: timeout waiting for hardware interrupt, followed by continuous I/O errors, timeouts, etc)
 +
|Jean-No 7 July 2015
 
|-
 
|-
|Panasonic SDHC 8GB class 6 ||4.8 ||4.4 || || ||
+
|style='background-color:#c00;'| nok
 +
|Transcend
 +
|microSDHC
 +
|16
 +
|10
 +
|TS16GUSDU1E
 +
|Raspy 2 with Raspbian which installs OK with Noobs then corrupts card on reboot
 +
|AndrewB 20 July 2015
 
|-
 
|-
|Panasonic SDHC 8GB class 4 ||11.1 || 9.7 || Debian Wheezy "Rasbpian" || Linux rpi 3.1.9+ #168 PREEMPT Sat Jul 14 18:56:31 BST 2012 armv6l GNU/Linux ||
+
|style='background-color:#c00;'| nok
 +
|Transcend
 +
|microSDHC
 +
|32
 +
|10
 +
|TS32GUSDU1E
 +
|Does not work with 2015-02-16-raspbian-wheezy
 +
Tested on Pi 2 Model B with Raspbian via Wheezy;
 +
Error while reading mmcblk0
 +
|Salomon 10 Apr 2015
 
|-
 
|-
|Platinum SDHC 8GB class 10||14.9|| 13.9 || Arch Linux ARM "hf-2013-02-11"|| Linux alarmpi 3.6.11-9-ARCH+ #1 PREEMPT Sat Mar 30 02:38:20 UTC 2013 armv6l GNU/Linux ||
+
|style='background-color:#c00;'| nok
 +
|Transcend
 +
|microSDHC
 +
|32
 +
|10
 +
|TS32GUSDU1
 +
|Tested on Pi 2 Model B with Rasbian Wheezy 3.18.11-v7+
 +
Error while reading mmcblk0
 +
|Artemko 27 Jul 2015
 
|-
 
|-
|Patriot microSDHC 16GB Class 10 (PSF16GMSHC10) ||9.5 ||5.2 ||Fedora 14 ||Linux raspi 3.1.9+ #101 ||init_emmc_clock=200000000 in config.txt
+
|style='background-color:#0a0;'| ok
|-
+
|Transcend
|Patriot SDHC 16GB Class 10 (PSF16GSDHC10) ||19.3 ||9.3 ||Debian Wheezy "Rasbpian" ||Linux raspberrypi 3.1.9+ #168 PREEMPT Sat Jul 14 18:56:31 BST 2012 armv6l GNU/Linux ||
+
|microSDHC
 +
|32
 +
|10
 +
|TS32GUSDU1
 +
|man:0x000074 oem:0x4a45 name:USDU1 hwrev:0x2 fwrev:0x0
 +
Tested on Pi 2 Model with Openelec 6.0.0 and Rasbian Wheezy 4.1.13-v7+
 +
Write 13.2MB/s Read 17.4MB/s (Sporadic boot problems on Openelec 5.x and earlier Rapsbian kernels)
 +
|Edozzo 13 Dec 2015
 
|-
 
|-
|Patriot SDHC 32GB Class 10 UHS-1 (PEF32GSDHC10U1) ||20.4 ||12.1 ||Debian Wheezy "Rasbpian" ||Linux raspberrypi 3.1.9+ #168 PREEMPT Sat Jul 14 18:56:31 BST 2012 armv6l GNU/Linux ||
+
|style='background-color:#c00;'| nok
 +
|Transcend
 +
|microSDHC
 +
|32
 +
|?
 +
|TS32GUSDHC4
 +
|Doesn't boot
 +
|Piponazo 7 Aug 2012
 
|-
 
|-
|Samsung SDHC 16GB Class 10 (MB-SPAGA) ||10.7 ||8.8 ||Fedora 17 ARM snapshot 07 May 2012 - GUI release ||Linux fedora-arm 3.1.9 #1 ||Had "long write sync" errors, slow boot times and then system instability using USB port on Macbook, switched to iPhone charger (5V 1A) and warning disappeared
+
|style='background-color:#c00;'| nok
 +
|Transcend
 +
|microSDHC
 +
|32
 +
|10
 +
|TS32GUSDHC10
 +
|(man:0x00001b oem:0x534d name:00000 hwrev:0x1 fwrev:0x0), with microSD to SD adapter, boots, (mmc0: timeout waiting for hardware interrupt, followed by continuous I/O errors, timeouts, etc), 2013-02-09-wheezy-raspbian
 +
|Bernard Ladenthin 12 Mar 2013
 
|-
 
|-
|Samsung SDHC 16GB Class 10 (MB-SPAGA) ||19.6 ||18.7 || Debian Wheezy "Raspbian"  ||Linux raspberrypi 3.1.9+ #168 PREEMPT Sat Jul 14 18:56:31 BST 2012 armvl GNU/Linux ||(Same user / card as above, definitely notable that Raspbian is superior)
+
|style='background-color:#0a0;'| ok
 +
|Transcend
 +
|microSDXC
 +
|64
 +
|10
 +
|TS64GUSDU1E
 +
|Raspberry Pi B+ Model (tested with ARM Arch Linux)
 +
|fluxon 28 Oct 2014
 
|-
 
|-
|Samsung SDHC 16GB Class 10 (MB-SPAGC) ||18.5 ||12.2 || Debian XFCE pipplware  ||Linux raspberrypi 3.10.33+ #356 PREEMPT Tue Mar 18 17:35:55 GMT 2014 armv6l GNU/Linux || djayor 9 May 2014
+
|style='background-color:#0a0;'| ok
 +
|Traveller
 +
|SDHC
 +
|4
 +
|?
 +
|High Speed
 +
|Works with raspbian
 +
|Sega dude 28 Jul 2012
 
|-
 
|-
|Samsung SDHC 4GB Class 4 (MB-SS4GA/EU) ||17.7 ||8.1 || Debian Wheezy "Raspbian" ||Linux raspberrypi 3.10.25+ #622 PREEMPT Fri Jan 3 18:41:00 GMT 2014 armv6l
+
|style='background-color:#c00;'| nok
||Markus 2014/02/24
+
|UNIREX
 +
|microSDHC
 +
|32
 +
|UHS-I C10
 +
|UMW-325M
 +
|mmcblk0: read problems during boot [including "mmc0: controller never released inhibit bit(s)" ], corruption ensues. this with Raspbian 2015-02-16 on Raspberry Pi2 Model B
 +
|mmhere 18 Feb 2015
 
|-
 
|-
|Samsung microSDHC 8GB Class 6 ( MB-MS08DA/EU) || 17.8 || 6.3 || Debian Wheezy "Raspbian" || Linux Rpi 3.12.24+ #694 PREEMPT Tue Jul 15 17:34:35 BST 2014 armv6l GNU/Linux || Felon 07 Jully 2014
+
|style='background-color:#0a0;'| ok
 +
|V-Gen
 +
|microSDHC
 +
|8
 +
|?
 +
|
 +
|No problems.(man:0x000073 oem:0x4247 name:NCard hwrev:0x1 fwrev:0x0). Tested with Raspbian Wheezy & Raspbmc
 +
|Rendyair 11 Sep 2012
 
|-
 
|-
|Samsung SDHC 32GB Class 6 || 21.6 || 17.4 || Debian Wheezy "Raspbian" || Linux raspberrypi 3.6.11+ #474 PREEMPT Thu Jun 13 17:14:42 BST 2013 armv6l GNU/Linux || -
+
|style='background-color:#c00;'| nok
 +
|Veho
 +
|SDHC
 +
|4
 +
|6
 +
|
 +
|
 +
|Spaaa 5 Jun 2012
 
|-
 
|-
|Samsung microSDHC 16GB Class 10 (MB-MPAGA/US) || 19.8 || 15.8 || Debian Wheezy "Raspbian" || Linux pisces 3.1.9+ #155 PREEMPT Mon Jul 9 12:49:19 BST 2012 armv6l GNU/Linux || -
+
|style='background-color:#0a0;'| ok
 +
|Veho
 +
|SDHC
 +
|8
 +
|6
 +
|Ultra fast
 +
|(man:0x00001b oem:0x534d name:00000 hwrev:0x1 fwrev:0x0) 7.8Mb/s. Slow but tested with Arch Linux
 +
|Johnlane 28 Jul 2012
 
|-
 
|-
|Samsung microSDHC 16GB Class 4 (MB-MS4GA/US) || 19.2 || 5.5 || Debian Wheezy "Raspbian" || ? || -
+
|style='background-color:#c00;'| nok
 +
|Verbatim
 +
|SDHC
 +
|8
 +
|6
 +
|Go
 +
|tested with NOOBS 1.3.2 and Raspbian Wheezy 2013-09-25; mmc0: timeout waiting for hardware interrupt
 +
|marcel.kolaja 12 Dec, 2013
 
|-
 
|-
|Samsung microSDHC 16GB Class 10 (MB-MPAGAEU) || 21.7 || 11.2 || Debian Wheezy "Raspbian" || Linux raspberrypi 3.6.11+ #538 PREEMPT Fri Aug 30 20:42:08 BST 2013 armv6l GNU/Linux || man:0x00001b oem:0x534d name:00000 hwrev:0x1 fwrev:0x0 <br> 512Mb version of Raspberry Pi
+
|style='background-color:#0a0;'| ok
 +
|Verbatim
 +
|SDHC
 +
|8
 +
|10
 +
|43961
 +
|
 +
|Petacz 13 Aug 2012
 
|-
 
|-
|SanDisk Extreme III 2GB Class 10 (BE07054050838) || 23.3 || 21.5 || Raspbmc || Linux raspbmc 3.2.27 #1 PREEMPT Mon Nov 5 20:50:02 UTC arm61 GNU/Linux || 512Mb version of Raspberry Pi
+
|style='background-color:#0a0;'| ok
 +
|Verbatim
 +
|SDHC
 +
|8
 +
|10
 +
|Premium
 +
|Tested with 2013-02-09 release of Raspbian Wheezy and Rasplex 0.1.37 - blue plastic version
 +
|Jahislove 11 may 2013
 
|-
 
|-
|SanDisk microSD 2GB ||4.7 ||4.2 ||archlinuxarm-29-04-2012 ||Linux alarmpi 3.1.9+ #66 Thu May 17 16:56:20 BST 2012 ||[http://dl.dropbox.com/u/268147/rpi/SanDisk_2GB_uSD_CDM_Bench.zip CrystalDiskMark results (FAT32)] Card has no serial/is likely a fake.
+
|style='background-color:#c00;'| nok
 +
|Verbatim
 +
|SDHC
 +
|8
 +
|10
 +
|Premium PSF8GSDHC10-PC
 +
|Tested with September release of Raspbian and Debian Wheezy - both fail to boot with mmc errors, confirmed fail with this black plastic version (may 2013)
 +
|XQx 31 Oct 2012 , confirmed Jahislove 11 may 2013
 
|-
 
|-
|SanDisk Ultra SDHC 4GB class 4 ||4.7 ||4.4 ||Raspbian Wheezy || Linux raspberry-pi 3.1.9+ #1 PREEMPT Wed Jun 6 16:26:14 CEST 2012 armv6l GNU/Linux || man:0x000003 oem:0x5344 name:SD04G hwrev:0x8 fwrev:0x0
+
|style='background-color:#c00;'| nok
 +
|Verbatim
 +
|SDHC
 +
|8
 +
|10
 +
|43961
 +
|Raspbian - installs it but doesn't boot, repeatedly prints: 'timeout waiting for hardware interrupt'
 +
|Gkontadakis 31 Aug 2013
 
|-
 
|-
|SanDisk Ultra II SDHC 4GB class 4 (15 MB/s)||20.9 ||14.6 ||Raspbian Wheezy || Linux raspberry-pi 3.1.9+ ||
+
|style='background-color:#0a0;'| ok
 +
|Verbatim
 +
|SDHC
 +
|16
 +
|4
 +
|44020
 +
|
 +
|Adelahunty 22 Nov 2012
 
|-
 
|-
|SanDisk SDHC 8GB class 4 ||11.1 ||5.6 ||Raspbian Wheezy || Linux raspberrypi 3.1.9+ #202 PREEMPT || After Hexxeh rpi-update. <br />man:0x000003 oem:0x5344 name:SD08G hwrev:0x8 fwrev:0x0
+
|style='background-color:#c00;'| nok
 +
|Verbatim
 +
|SDHC
 +
|16
 +
|6
 +
|47178
 +
|Raspbian Pisces RC3 - boots, but after login: mmc timeout waiting for interrupt
 +
|Razzda 15 Jul 2012
 
|-
 
|-
|SanDisk SDHC 4GB class 4 ||11.15 ||5.15 ||Raspbian Wheezy || Linux raspberrypi 3.6.11+ #456 PREEMPT || man:0x000003 oem:0x5344 name:SD04G hwrev:0x8 fwrev:0x0
+
|style='background-color:#0a0;'| ok
 +
|Verbatim
 +
|SDHC
 +
|16
 +
|10
 +
|43962
 +
|
 +
|Klass 24 Jun 2012
 
|-
 
|-
|SanDisk SDHC 8GB class 4 ||4.7 ||3.2 ||Debian Squeeze || ||
+
|style='background-color:#c00;'| nok
 +
|Verbatim
 +
|SDHC
 +
|16
 +
|10
 +
|13762
 +
|mmc timeout
 +
|Epa 20130304
 
|-
 
|-
|SanDisk Ultra SDHC I 8GB class 6 "30MB/s*" ||19.5 || 7.6 ||archlinuxarm || 3.1.9-22-ARCH+ #1 PREEMPT Sun Jun 17 13:54:30 UTC 2012 || "mmc0: error -84 whilst initialising SD card" at bootup, but works fine
+
|style='background-color:#0a0;'| ok
 +
|Verbatim
 +
|SDHC
 +
|32
 +
|6
 +
|44032
 +
|
 +
|Jarip 14 Jul 2012
 
|-
 
|-
|SanDisk Ultra SDHC I 8GB class 10 "30MB/s*" ||19.3 || 3.2 ||Raspbian Wheezy || 3.1.9+ #168 PREEMPT Sat Jul 14 18:56:31 BST 2012 ||
+
|style='background-color:#c00;'| nok
 +
|Verbatim
 +
|microSDHC
 +
|8
 +
|10
 +
|44012
 +
|ArchLinux - boots, but after system update develops segmentation faults
 +
|John.glasson 29 Jul 2012
 
|-
 
|-
|SanDisk Ultra SDHC I 8GB class 10 "30MB/s* (SDSDU-008G-UQ46)" || 18.6 || 14.5 ||Raspbian GNU/Linux 7 (wheezy) || Linux raspberrypi 3.10.21+ #604 PREEMPT Mon Dec 2 20:17:09 GMT 2013 armv6l GNU/Linux ||
+
|style='background-color:#0a0;'| ok
 +
|Verbatim
 +
|microSDHC
 +
|16
 +
|4
 +
|
 +
|Tested with 2013-02-09-wheezy-raspbian - works without any problem
 +
|J3rGuS 19 March 2013
 
|-
 
|-
|SanDisk Ultra SDHC I 8GB class 10 "30MB/s*" || 13.6 || 14.5 || raspbmc rc3 || Linux raspbmc 3.1.9-test-12-06 #1 PREEMPT Mon Jun 18 20:07:45 UTC 2012 armv6l GNU/Linux ||
+
|style='background-color:#c00;'| nok
 +
|Verbatim
 +
|microSDHC
 +
|32
 +
|10
 +
|44083
 +
|Tested with Noobs, Win32DiskImager on PI2 B : block at "Clearing existing EBR" or "failed whilst writing reserved sector"
 +
|ScreamZ 29 July 2015
 
|-
 
|-
|SanDisk Ultra SDHC II 16GB class 2 "15MB/s*" ||16.7 || 16.2 || Raspbian Wheezy || 3.1.9+ #168 PREEMPT Sat Jul 14 18:56:31 BST 2012 || man:0x000003 oem:0x5344 name:SD16G hwrev:0x8 fwrev:0x0
+
|style='background-color:#0a0;'| ok
 +
|Walgreens Photo
 +
|SD
 +
|1
 +
|?
 +
|
 +
|Works with raspbmc, have not tested others
 +
|Sp00l 21 Jul 2012
 
|-
 
|-
|SanDisk Ultra SDHC 16GB class 10 UHS-1 "30Mb/s" (SDSDU-016G-U46) ||20.9 ||18.1 ||Raspbian Wheezy || Linux raspberrypi 3.1.9+ #202 PREEMPT || After Hexxeh rpi-update. <br />man:0x000003 oem:0x5344 name:SU16G hwrev:0x8 fwrev:0x0
+
|style='background-color:#0a0;'| ok
 +
|Walgreens Photo
 +
|SD
 +
|2
 +
|?
 +
|
 +
|Works with raspbian, have not tested others
 +
|Sega dude 27 Jul 2012
 
|-
 
|-
|SanDisk Ultra SDHC 16GB class 10 "30Mb/s" (SDSDU-016G-U46) ||20.9 ||10.9 ||Raspbian Wheezy || Linux raspberrypi 3.6.11+ #371 PREEMPT ||  
+
|style='background-color:#0a0;'| ok
 +
|Walgreens Photo
 +
|microSDHC
 +
|16
 +
|10
 +
|
 +
|…testing on B+…
 +
|[[User:DisneyWizard|DisneyWizard]] ([[User talk:DisneyWizard|talk]]) Aug 2019
 
|-
 
|-
|SanDisk Ultra SDHC 32GB class 10 "30Mb/s" (SDSDU-032G-U46) ||18.3 ||8.8 ||Raspbian Wheezy || Linux raspberrypi 3.12.19+ #684 PREEMPT || man:0x000003 oem:0x5344 name:SU32G hwrev:0x8 fwrev:0x0
+
|style='background-color:#0a0;'| ok
 +
|WD Micro SDHC Purple 32GB 80MB/s UHS-I
 +
|microSDHC
 +
|32
 +
|10
 +
|
 +
|Works with Raspbian buster on 3B+. This card is indended for continuous writing (security cameras).
 +
|[[User:Vladak|Vladak]] ([[User talk:Vladak|talk]]) 22:00, 1 August 2019 (CEST)
 
|-
 
|-
|SanDisk Ultra SDHC 16GB class 10 "30MB/s" (SDSDU-016G-U46S)  ||21.6 ||15.2 || 2013-02-09-wheezy-raspbian || Linux raspberrypi 3.6.11+ #371 PREEMPT Thu Feb 7 16:31:35 GMT 2013 armv6l GNU/Linux || man:0x000003 oem:0x5344 name:SU16G hwrev:0x8 fwrev:0x0
+
|style='background-color:#0a0;'| ok
 +
|Sony
 +
|microSDXC
 +
|64
 +
|10
 +
|SR-64UYA
 +
|Works with Raspy 2 and Snappy Ubuntu
 +
|[[User:Ileo|Ileo]] ([[User talk:Ileo|talk]]) 20:10, 15 March 2015 (UTC)
 
|-
 
|-
|SanDisk Extreme SDHC I 4GB class 10 "30MB/s" || 19.7 || 21.0 || 2012-07-15-wheezy-raspbian || Linux raspberrypi 3.1.9+ #168 PREEMPT Sat Jul 14 18:56:31 BST 2012 armv6l GNU/Linux || Only boots with images with new firmware, didn't boot with previous images.
+
|style='background-color:#0a0;'| ok
 +
|Sandisk
 +
|microSDHC
 +
|16
 +
|10
 +
| SDSQXNE-016G-GN6MA
 +
|Works with Raspbian on Raspberry Pi 2
 +
|Willem2  14 Feb 2015
 
|-
 
|-
|SanDisk Extreme SDHC I 8GB class 10 "30MB/s" || 17.7 || 19.7 || Archlinuxarm 2012-06-13 || Linux raspi 3.1.9-28-ARCH+ #1 PREEMPT Fri Jul 6 23:07:26 UTC 2012 armv6l GNU/Linux ||
+
!
|-
+
! Manufacturer
|SanDisk Extreme SDHC I 8GB class 10 "30MB/s" || 17.2 || 10.6 || RISC OS 5.21 (04-Jun-2014) || RC12a ||
+
! Type
|-
+
! Size
|SanDisk Extreme SDHC UHS-I 32GB class 10 "30MB/s" || 21.4 / 18.4 || 19.5 / 22.2 || 2012-10-28-wheezy-raspbian || Linux raspberrypi 3.2.27+ #250 PREEMPT Thu Oct 18 19:03:02 BST 2012 armv6l GNU/Linux ||
+
! Class
|-
+
! Part Number
|SanDisk microSDHC UHS-I 32GB class 10 "30MB/s" || 21.1 || 10.9 || 2013-02-09 Debian Wheezy "Raspbian" || Linux raspberrypi 3.6.11+ #371 PREEMPT Thu Feb 7 16:31:35 GMT 2013 armv6l GNU/Linux ||
+
! Description
|-
+
! Added
|SanDisk Ultra microSDHC 32GB class 10 "48MB/s" (SDSDQUN-032G-FFP-A)|| 18.5 || 10.8 || Debian Wheezy "Raspbian" || Linux raspberrypi 3.12.28+ #709 PREEMPT Mon Sep 8 15:28:00 BST 2014 armv6l GNU/Linux || Raspberry Pi B+, 2014-12-20
+
|}
|-
+
 
|SanDisk Extreme SDHC UHS-I 16GB class 10 "45MB/s" (SDSDX-016G-X46) || 21.1 || 20.8 || 2012-09-18-wheezy-raspbian || Linux raspberrypi 3.2.27+ #160 PREEMPT Mon Sep 17 23:18:42 BST 2012 armv6l GNU/Linux || man:0x000003 oem:0x5344 name:SU16G hwrev:0x8 fwrev:0x0
+
== Performance ==
|-
+
 
|Sandisk Extreme microSDHC UHS-I 16GB || 18.8 || 18.2 || 2014-09-09-wheezy-raspbian on Model B+  || Linux raspberrypi 3.12.28+ #709 PREEMPT Mon Sep 8 15:28:00 BST 2014 armv6l GNU/Linux || man:0x000003 oem:0x5344 name:SE16G hwrev:0x8 fwrev:0x0
+
The following results have been reported by Users.
|-
+
 
|SanDisk Extreme SDHC UHS-I 32GB class 10 "45MB/s" (SDSDX-032G-X46) || 20.96 || 17.9 || 2013-05-20-wheezy-raspabian || Linux raspberrypi 3.6.11+ #456 PREEMPT || man:0x000003 oem:0x5344 name:SU32G hwrev:0x8 fwrev:0x0
+
=== Terminal Commands ===
|-
+
 
|SanDisk Extreme PLUS SDHC UHS-I 32GB class 10 "80MB/s" (SDSDXS-032G-A46) || 18.7 || 16.5 || Debian Wheezy "Raspbian" || Linux raspberrypi 3.12.22+ #691 PREEMPT Wed Jun 18 18:29:58 BST 2014 armv6l GNU/Linux || man:0x000003 oem:0x5344 name:SE32G hwrev:0x8 fwrev:0x0
+
To obtain the results in the table, type the following lines at a command prompt. If you are running the GUI windows, open the Terminal application.
|-
+
 
|SanDisk SDHC 32GB class 6 ||4.6 ||4.8 || || ||
+
The '''dd''' command is the Linux block copy command. It reads from the '''if=''' file, in the first case a block of zeros, and writes to the '''of=''' file, in the first case the file named test.tmp in your HOME directory (the ~/ means your HOME directory). The '''bs=''' gives the size of the data, and the '''count=''' gives the number of times this is repeated. '''sync''' ensures that the filesystem cache is flushed to have more realistic data. Please run it multiple times, one sample is not scientific enough.
 +
 
 +
'''Write speed'''
 +
 
 +
sync; dd if=/dev/zero of=~/test.tmp bs=500K count=1024
 +
 
 +
'''Read speed'''
 +
 
 +
sync; echo 3 | sudo tee /proc/sys/vm/drop_caches
 +
sync; time dd if=~/test.tmp of=/dev/null bs=500K count=1024
 +
 
 +
'''Delete the temporary file'''
 +
 
 +
rm ~/test.tmp
 +
 
 +
'''Kernel version'''
 +
 
 +
uname -a
 +
 
 +
=== External Benchmarks ===
 +
 
 +
* http://www2.sakoman.com/OMAP/microsd-card-perfomance-test-results.html
 +
* http://www.raspberrypi.org/phpBB3/viewtopic.php?f=2&t=4076
 +
 
 +
=== Is this reliable? ===
 +
 
 +
SD cards are given a rating (Class) by the manufacturers; the higher the rating the quicker the card. SD cards are usually used in a camera. The camera usually writes a block of data (a picture), then writes another. The SD card is tuned for this type of use. When used in the Raspberry Pi the data is written and read a lot more frequently, and from differing locations on the card. This difference in use means the
 +
manufacturers rating may not be as applicable for the Raspberry Pi.
 +
 
 +
=== SD card performance ===
 +
 
 +
The table can be sorted using the triangles in the top row. '''Please add entries in the correct location, so that the initial sort is by Manufacturer, Size, Type and Class'''
 +
 
 +
{| class="wikitable sortable"
 +
! SD Card !! Read (MB/s) !! Write (MB/s) !! class="unsortable" | Distro !! class="unsortable" | Kernel !! class="unsortable" | Notes
 
|-
 
|-
|SanDisk uSDXC 64GB class 6 ||4.9 ||3.8 ||archlinuxarm-29-04-2012 ||Linux alarmpi 3.1.9+ #66 Thu May 17 16:56:20 BST 2012 ||[http://dl.dropbox.com/u/268147/rpi/SanDisk_64GB_uSDXC_CDM_Bench.zip CrystalDiskMark results (FAT32)]
+
|ADATA 8GB SDHC Class 10 (ASDH8GCL10-R) || 19.6 || 18.8 || 2012-08-04 Debian Wheezy "Raspbian" || Linux raspberrypi 3.1.9+ #168 PREEMPT Sat Jul 14 18:56:31 BST 2012 armv6l GNU/Linux ||
 
|-
 
|-
|Silicon Power 8GB class 10 (SP008GBSDH010V10) || 15.6 || 11.7 || Debian Wheezy "Raspbian" (2012-12-16) || Linux raspberrypi 3.2.27+ #250 PREEMPT Thu Oct 18 19:03:02 BST 2012 armv6l GNU/Linux ||
+
|ADATA 8GB SDHC Class 10 (ASDH8GCL10-R) || 18.2 || 12.4 || 2012-12-16 Debian Wheezy "Raspbian" || Linux raspberrypi 3.2.27+ #250 PREEMPT Thu Oct 18 19:03:02 BST 2012 armv6l GNU/Linux ||  
 
|-
 
|-
|Sony 8GB class 10 (SF-8UY/TQ1) || 20.9 || 13.4 || Debian Wheezy "Raspbian" (2013-09-25) || Linux raspberrypi 3.6.11+ #538 PREEMPT Fri Aug 30 20:42:08 BST 2013 armv6l GNU/Linux ||man:0x000082 oem:0x4a54 name:NCard hwrev:0x0 fwrev:0x2
+
|ADATA 16GB SDHC Class 10 || 19.5 || 16.9 || 2012-06-13 Arch Linux ARM || Linux alarmpi 3.2.27+ #60 PREEMPT Thu Aug 23 15:33:51 BST 2012 armv6l GNU/Linux ||
 
|-
 
|-
|TakeMS SDXC 64GB, Class 10 ||16.9 ||8.2 ||Debian Wheezy "Raspbian" (2013-06-02) ||Linux pisys 3.6.11+ #456 PREEMPT Mon May 20 17:42:15 BST 2013 armv6l GNU/Linux || Pi B overclocked arm_freq=1000 core_freq=500 sdram_freq=600 over_voltage=6
+
|ADATA 16GB SDHC Class 10 || 17.8 || 11.2 || Debian Wheezy "Raspbian" || Linux raspberrypi 3.10.24+ #610 PREEMPT Thu Dec 12 13:12:09 GMT 2013 armv6l GNU/Linux || man:0x00001d oem:0x4144 name:SD    hwrev:0x1 fwrev:0x0
 
|-
 
|-
|TDK microSDHC 4GB, Class 4 (80-56-10301-004G) ||11.2 ||4.7 ||Debian Wheezy "Raspbian" (2012-07-15) ||3.1.9+ #168 PREEMPT Sat Jul 14 18:56:31 BST 2012 ||  
+
|ADATA 16GB SDHC Class 10 (ASDH16GUICL10-R) || 18.5 || 9.9 || archlinux-hf-2013-11-14 || Linux alarmpi 3.10.25-1-ARCH #1 PREEMPT Mon Dec 23 16:07:25 MST 2013 armv6l GNU/Linux ||
 
|-
 
|-
|Toshiba SD-T16G SDHC 16GB, Class 10 (1046 US7022 C) ||20.6 ||13.5 ||Debian Wheezy "Raspbian" ||3.1.9+ #272 PREEMPT Tue Aug 7 22:51:44 BST 2012 armv6l GNU/Linux ||
+
|ADATA 16GB SDHC Class 10 (ASDH16GUICL10-R) || 18.4 || 16.06 || 2014-01-07-wheezy-raspbian || Linux raspberrypi 3.10.25+ #622 PREEMPT Fri Jan 3 18:41:00 GMT 2014 armv6l GNU/Linux || Fresh install
 
|-
 
|-
|Toshiba microSDHC 4GB Class 4 ||17.8 ||10.4 ||Debian Wheezy "Raspbian" ||Linux raspberrypi 3.12.28+ #709 PREEMPT Mon Sep 8 15:28:00 BST 2014 armv6l GNU/Linux ||
+
|ADATA 16GB SDHC Class 10 (AUSDH16GUICL10-R) || 18.6 || 12.3 || 2014-07-08-wheezy-raspbian || Linux raspberrypi 3.12.22+ #691 PREEMPT Wed Jun 18 18:29:58 BST 2014 armv6l GNU/Linux || Fresh NOOBS install + apt-get upgrade
 
|-
 
|-
|Transcend microSDHC 16GB Class 10 (16GBBEU300A) || 17.7 || 9 || Debian Wheezey 7.6 "Raspbian" || Linux raspbian 3.12.28+ #709 PREEMPT Mon Sep 8 15:28:00 UTC 2014 armv6l GNU/Linux || 2014-10-05 by @xhark
+
|ADATA 16GB SDHC Class 10 (AUSDH16GUICL10-RA1) || 13.8 || 7.1 || 2014-12-24-wheezy-raspbian || Linux raspberrypi 3.12.35+ #730 PREEMPT Fri Dec 19 18:31:24 GMT 2014 armv6l GNU/Linux || Fresh Raspbian install
 
|-
 
|-
|Transcend SDHC 8GB Class 10 (TS8GSDHC10E) || 22.2 || 17.1 || 2013-04-22 Raspbmc || Linux raspbmc 3.6.11 #2 PREEMPT Wed Mar 13 17:12:47 UTC 2013 armv6l GNU/Linux || Pi overclocked toarm_freq=840, core_freq=350, gpu_freq=253
+
|ADATA 16GB SDHC Class 10 (AUSDH16GUICL10-RA1) || 18.8 || 9.3 || 2014-12-24-wheezy-raspbian || Linux raspberrypi 3.12.35+ #730 PREEMPT Fri Dec 19 18:31:24 GMT 2014 armv6l GNU/Linux || Fresh Raspbian install + apt-get upgrade + reboot
 
|-
 
|-
|Transcend SDHC 8GB Class 10 (TS8GSDHC10E) ||15.9||17.5||Debian Wheezy "Raspbian"||Linux RaspberryPi 3.12.22+ #691 PREEMPT Wed Jun 18 18:29:58 BST 2014 armv6l GNU/Linux||stock clock speed||
+
|ADATA 32GB SDHC Class 10 (ASDH32GCL10-R) || 20.1 || 6.4 || 2012-06-18-wheezy-beta || Linux raspberrypi 3.1.9+ #152 PREEMPT Fri Jul 6 18:47:16 BST 2012 armv6l GNU/Linux ||
 
|-
 
|-
|Transcend microSDHC 8GB Class 10 (TS8GUSDHC10) || 20.2 || 11.2 || Debian Wheezy "Raspbian" || Linux raspberrypi 3.1.9+ #272 PREEMPT Tue Aug 7 22:51:44 BST 2012 armv6l GNU/Linux ||  
+
|AmazonBasics 8GB SDHC Class 10 || 19.3 || 8.6 || Debian Wheezy "Raspbian" || Linux massah 3.1.9+ #168 PREEMPT Sat Jul 14 18:56:31 BST 2012 armv6l GNU/Linux ||
 
|-
 
|-
|Transcend SDHC 8GB class 6 ||5.8 ||5.8 || || ||
+
|Apacer SDHC Class 10 8GB || 11.4 || 35 || Debian Wheezy "Raspbian" || Linux MehrTech 4.1.7-v7+ #817 PREEMPT Sat Sep 19 15:32:00 BST 2015 armv7l Debian GNU/Linux ||
 
|-
 
|-
|Transcend SDHC 8GB Class 6 (TS8GSDHC6) ||4.6 ||4.0 ||Debian Squeeze "debian6-19-04-2012" ||Linux raspberrypi 3.1.9+ #90 Wed Apr 18 18:23:05 BST 2012 armv61 GNU/Linux ||Tested with dd. Card doesn't maintain the promised minimum class speed.
+
|AmazonBasics 8GB SDHC Class 10 || 17 || 9.4 || Debian Wheezy "Raspbian" || Linux massah 3.1.9+ #202 PREEMPT Wed Jul 25 22:11:06 BST 2012 armv6l GNU/Linux || Same board and card as above, slightly newer kernel.
 
|-
 
|-
|Transcend SDHC 8GB Class 4 (TS8GSDHC4) ||11.1 ||8.1 ||Debian Wheezy "Rasbpian" ||Linux raspberrypi 3.1.9+ #168 PREEMPT Sat Jul 14 18:56:31 BST 2012 armv6l GNU/Linux ||man:0x000003 oem:0x5344 name:SD08G hwrev:0x8 fwrev:0x0
+
|blackweb 16GB microSDHC Class 10 (EKSDM16GCGBW)||22.1||17.4||2020-02-13 Debian Buster "Raspbian"||Linux raspberrypi 4.19.97-v7+ #1294 SMP Thu Jan 30 13:15:58 GMT 2020 armv7l GNU/Linux||Raspberry Pi 3 B+, fresh Raspbian install through Balena Etcher. Walmart store brand.
 
|-
 
|-
|Transcend microSDHC 8GB Kit, Class 4 (TS8GUSDHC4)||4.7 ||3.7 ||Raspbian Wheezy || Linux raspberry-pi 3.1.9+ #1 PREEMPT Wed Jun 6 16:26:14 CEST 2012 armv6l GNU/Linux || man:0x000003 oem:0x5344 name:SU08G hwrev:0x8 fwrev:0x0
+
|Emtec 8GB SDHC Class 10 (EKMSD8G150XHC) || 20.3 || 14.6 || Debian Wheezy "Raspbian" || Linux raspberrypi 3.2.27+ #250 PREEMPT Thu Oct 18 19:03:02 BST 2012 armv6l GNU/Linux || Turbo mode = High (950/250/450MHz)
 
|-
 
|-
|Transcend SDHC 8GB Class 10 (TS8GSDHC10) ||4.6 ||4.6 ||Debian Squeeze "debian6-19-04-2012" ||Linux raspberrypi 3.1.9+ armv61 GNU/Linux ||
+
|Extrememory 16GB SDHC Class 10 || 4.7 || 4.5 || Debian Wheezy "Raspbian" || Linux raspbian 3.1.9+ #52 ||
 
|-
 
|-
|Transcend SDHC 8GB Class 10 (TS8GSDHC10) ||19.5 ||18.5 ||Debian Wheezy "Rasbpian" ||Linux raspberrypi 3.1.9+ #168 PREEMPT Tue Aug 7 22:51:44 BST 2012 armv6l GNU/Linux ||
+
|Extrememory 16GB SDHC Class 10 || 11.3 || 5.4 || Debian Wheezy "Raspbian" || Linux raspbian 3.1.9+ #101 || init_emmc_clock=200000000 in config.txt
 
|-
 
|-
|Transcend SDHC 8GB Class 10 (TS8GSDU1) UHC-I X300 ||20.9 ||13.1 ||Linux alarmpi 3.6.11-14-ARCH+ #1 PREEMPT Sun Jul 21 17:39:58 CDT 2013 armv6l GNU/Linux ||Arch Linux ||
+
|Extrememory 16GB SDHC Class 10 || 18.2 || 6.3 || Debian Wheezy "Raspbian" || Linux raspbian 3.1.9+ custom || kernel and firmware as of 17.06.2012, no extra option in config.txt
 
|-
 
|-
|Transcend SDHC 8GB Class 10 (TS8GSDHC10U1) UHC-I X600 ||21.1 ||15 ||Linux alarmpi 3.6.11-14-ARCH+ #1 PREEMPT Sun Jul 21 17:39:58 CDT 2013 armv6l GNU/Linux ||Arch Linux ||
+
|Extrememory 16GB SDHC Class 10 <br/>(man:0x000012 oem:0x3456 name:F0F0F hwrev:0x1 fwrev:0x0) || 16.9 || 10.7 || archlinuxarm-13-06-2012 || Linux alarmpi 3.1.9-25-ARCH+ #1 PREEMPT ||
 
|-
 
|-
|Transcend SDHC 8GB Class 10 (TS8GSDHC10U1) UHC-I X600 ||18.5 ||12.4 ||Debian Wheezy (Raspbian 2014-01-07) ||Linux raspi 3.10.25+ #622 PREEMPT Fri Jan 3 18:41:00 GMT 2014 armv6l GNU/Linux ||man:0x000074 oem:0x4a45 name:SDU1 hwrev:0x0 fwrev:0x2
+
|Extrememory 32GB SDHC Class 10 <br/>(man:0x000003 oem:0x5344 name:SMI  hwrev:0x1 fwrev:0x0) || 18.7 || 16.5 || archlinuxarm-13-06-2012 || Linux alarmpi 3.1.9-25-ARCH+ #1 PREEMPT ||
 
|-
 
|-
|Transcend SDHC 4GB Class 6 ||9.8 ||8.8 ||Fedora Remix FC14 ||Linux raspi 3.1.9 #1 PREEMPT Sat Mar 3 21:58:00 UTC 2012 armv6l armv6l armv6l GNU/Linux ||Not sure why this setup is faster than others, test results repeatable.
+
|Farnell Branded (Samsung) 4GB SDHC Class 4 (MMBTF04GWBCA-ME) || 20.1 || 6.9 || Debian Wheezy Raspbian || Linux raspbian 3.1.9+ #168 || Pi overclocked to 900 Mhz arm_freq and 500 Mhz sdram_freq
 +
|-
 +
|Fugi 32GB SDHC Class 10 (P10NM00580A) || 12.7 || 19.8 || Debian Wheezy Raspbian || Linux raspbian 3.1.9+ #168 || man:0x000073 oem:0x4247 name:NCard hwrev:0x1 fwrev:0x0
 +
|-
 +
|GoodRAM 16GB SDHC Pro Class 10 (SDC16GHC10PGRR9) || 19.4 || 18.0 || Debian Wheezy Raspbian || Linux raspbian 3.1.9+ #272 ||
 +
|-
 +
|Greenliant Industrial Temp SD / microSD ArmourDrive EX Series 16GB SDHC Class 10 (GLS93MP016G1-I-BZ801) ||23,3 ||18.0 ||Raspbian GNU/Linux 9.6 (stretch) ||Linux raspberrypi 4.14.79-v7+ #1159 SMP Sun Nov 4 17:50:20 GMT 2018 armv7l GNU/Linux ||Raspberry Pi 3 B+<br/>man:0x000001 oem:0x5041 name:GOL01 hwrev:0x6 fwrev:0x0
 +
|-
 +
|Integral 16GB SDHC Class 10 ||17.7 || 19.6 || Debian Wheezy Raspbian || Linux raspbian 3.1.9+ #168 ||
 +
|-
 +
|Intenso 32GB microSDHC Class 10 UHS-I || 21.1 || 22.8 || Raspbian Jessie Lite 2016-03-18 || Linux raspberrypi 4.1.19-v7+ #858 SMP Tue Mar 15 15:56:00 GMT 2016 armv7l GNU/Linux || Productnumber from Intenso: 3423480 - 32 GB EAN: 4034303019830 Test was performed after a freh installation through an ssh-channel
 +
|-
 +
|Kingmax 8GB microSDHC Class 4 (KM08GMCSDHC41A) || 13.6 || 3.7 || Debian Wheezy Raspbian || Linux 3.1.9+ #242 PREEMPT Wed Aug 1 19:47:22 BST 2012 ||
 +
|-
 +
|Kingston 4GB SDHC class 4 ||4.5 ||4.1 ||Debian Squeeze "debian6-19-04-2012" ||Linux raspberrypi 3.1.9+ #52 Tue May 8 23:49:32 BST 2012 ||
 +
|-
 +
|Kingston 4GB SDHC class 4 ||4.2 ||2.5 ||archlinuxarm-19-04-2012 ||Linux alarmpi 3.1.9-13+ #6 Thu May 10 00:48:37 UTC 2012 ||Identical card to one above. One to look into, as I was expecting Arch to be faster...
 +
|-
 +
|Kingston 4GB uSDHC class 4 ||4.0 ||3.8 ||Debian Squeeze ||Linux 3.1.9+ #90 ||
 +
|-
 +
|Kingston 8GB uSDHC class 4 (SDC4/8GB) ||4.7 ||3.7 ||archlinuxarm-29-04-2012 ||Linux alarmpi 3.1.9+ #66 Thu May 17 16:56:20 BST 2012 ||This is my only card that can be counted on to boot up on each plug-in.
 +
|-
 +
|Kingston 4GB microSDHC Class 10 (SDC10/4GB) || 13.4 || 10.6 || Debian Wheezy "Raspbian" || Linux raspberrypi 3.12.35+ #730 PREEMPT Fri Dec 19 18:31:24 GMT 2014 armv6l GNU/Linux || c 22 Jan 2015
 +
|-
 +
|Kingston 8GB microSDHC Class 4 SDC4/8GB 56 || 18.1 || 3.8 || Ubuntu-mate RPi || Linux 3.18.0-20-rpi2 #21 Ubuntu SMP PREEMPT Sun Apr 5 2015 armv71 GNU/Linux || man:0x000002 oem:0x544d name:SA08G hwrev:0x1 fwrev: 0x0
 +
|-
 +
|Kingston 8GB microSDHC Class 10 || 14.5 || 8.1 || Debian Wheezy "Raspbian" || Linux Rpi 3.12.24+ #694 PREEMPT Tue Jul 15 17:34:35 BST 2014 armv6l GNU/Linux || Felon 07 July 2014
 +
|-
 +
|Kingston 16GB microSDHC class 4 ||17.1 ||5.1 ||2013-02-09 Debian Wheezy "Raspbian" ||Linux raspberrypi 3.6.11+ #371 PREEMPT Thu Feb 7 16:31:35 GMT 2013 armv6l GNU/Linux ||
 +
|-
 +
|Kingston 16GB microSDHC Class 10 (SDC10/16GB) ||17.5 ||11.5 ||Raspbian Jessie Lite ||Linux raspberrypi 4.4.13-v7+ #894 SMP Mon Jun 13 13:13:27 BST 2016 armv7l GNU/Linux ||
 +
|-
 +
|Kingston 16GB microSDHC class 10 ||20.1 ||13.4 ||2013-02-09 Debian Wheezy "Raspbian" ||Linux raspberrypi 3.6.11+ #371 PREEMPT Thu Feb 7 16:31:35 GMT 2013 armv6l GNU/Linux ||
 +
|-
 +
|Kingston 16GB microSDHC class 10 (SDCA3/16GB) ||24.9 ||18.1 ||2015-04-01 Debian Wheezy "Raspbian" ||Linux raspberrypi 3.18.7-v7+ #755 SMP PREEMPT Thu Feb 12 17:20:48 GMT 2015 armv7l GNU/Linux ||
 +
|-
 +
|Kingston 16GB microSDHC class 10 UHS-I + SD adapter (SDC10G2/16GB) ||18.3 ||9.5 || 2015-08-08 Debian Jessie "Raspbian" ||Linux pi 3.18.0-trunk-rpi #1 PREEMPT Debian 3.18.5-1~exp1+rpi19 (2015-08-08) armv6l GNU/Linux ||Raspberry Pi B
 +
|-
 +
|Kingston 32GB microSDHC class 10 ||17.9 ||10.9 ||2013-02-09 Debian Wheezy "Raspbian" ||Linux raspberrypi 3.12.22+ #691 PREEMPT Wed Jun 18 18:29:58 BST 2014 armv6l GNU/Linux ||
 +
|-
 +
|Kingston 8GB SDHC Class 4 (SD4/8GB) || 16.2 || 5.2 ||2013-12-20 Debian Wheezy "Raspbian" ||Linux RaspberryPi 3.10.24+ #614 PREEMPT Dec 19 20:38 GMT 2013 armv6L GNU/Linux ||
 +
|-
 +
|Kingston 8GB SDHC Class 4 (SD4/8GB) ||4.6 ||3.0 ||archlinuxarm-29-04-2012 ||Linux alarmpi 3.1.9+ #66 Thu May 17 16:56:20 BST 2012 ||
 +
|-
 +
|Kingston 8GB SDHC Class 4 (SD4/8GB) ||13.2 ||3.4 || Hexxeh Raspbian r3 ||Linux raspbian 3.1.9+ #202 PREEMPT Wed Jul 25 22:11:06 BST 2012 armv6l GNU/Linux || man:0x000002 oem:0x544d name:SA08G hwrev:0x1 fwrev:0x0
 +
|-
 +
|Kingston 8GB SDHC Class 10 (SD10V/8GB) || 16.2 || 9.9 ||2013-12-20 Debian Wheezy "Raspbian" ||Linux RaspberryPi 3.10.24+ #614 PREEMPT Dec 19 20:38 GMT 2013 armv6L GNU/Linux ||
 +
|-
 +
|Kingston 32GB SDHC Class 10 ||10.8 ||8.1 ||Fedora 17 ARM snapshot 07 May 2012 ||Linux fedora-arm 3.1.9 #1 ||mmc0: note - long write sync 1453000ns - 14608 its. - kernel/module problems?
 +
|-
 +
|Kingston 32GB SDHC Class 10 ||4.7 ||4.1 ||Fedora 17 ARM nightly snapshot ||Linux fedora-arm 3.1.9+ #101 PREEMPT Mon Jun 4 17:19:44 BST 2012 ||custom kernel from raspberrypi github - no more mmc0 sync problems
 +
|-
 +
|Kingston 32GB SDHC Class 10 ||4.6 ||3.5 ||Debian Squeeze "debian6-19-04-2012" ||Linux raspberrypi 3.1.9+ #90 ||
 +
|-
 +
|Kingston 32GB SDHC Class 10 ultimate X 100X||16.9 ||12.3 ||Raspbian Wheezy || 4.1.7+ #817 PREEMPT  || SD10G2 man:0x000041 oem:0x3432 name:SD16G hwrev:0x3 fwrev:0x0
 +
|-
 +
|Kingston 64GB SDXC lass 10 (SDCX10/64GB) ||13.9 ||10.1 ||Raspbian 2015-02-16 ||Linux raspberrypi 3.18.8-v7+ ||
 +
|-
 +
|LaXar Ultra 8GB Class 10||18.2||10.4||Raspbian Stretch 2017-11-29||Linux xxxxx 4.9.79-v7+ #1086 SMP Wed Jan 31 18:03:34 GMT 2018 armv7l GNU/Linux||
 +
|-
 +
|Lexar Platinum II 8GB SDHC Class 10 UHS-I || 18.5 || 9.1 ||2013-12-20 Debian Wheezy "Raspbian" ||Linux RaspberryPi 3.10.24+ #614 PREEMPT Dec 19 20:38 GMT 2013 armv6L GNU/Linux ||
 +
|-
 +
|Lexar 32GB microSDHC Class 10 UHS-I (SDMI32GBWMC300A)||27.1||16.7||2020-02-13 Debian Buster "Raspbian"||Linux raspberrypi 4.19.97-v7+ #1294 SMP Thu Jan 30 13:15:58 GMT 2020 armv7l GNU/Linux||Raspberry Pi 3 B+, fresh Raspbian install through Balena Etcher
 +
|-
 +
|Noname 16GB uSDHC Class 4 ||18.5 ||2.6 ||Raspmc ||Linux raspbmc 3.2.27 #1 PREEMPT Mon Nov 5 20:50:02 UTC 2012 armv6l GNU/Linux ||
 +
|-
 +
|Panasonic 8GB SDHC Class 6 ||4.8 ||4.4 || || ||
 +
|-
 +
|Panasonic 8GB SDHC Class 4 ||11.1 || 9.7 || Debian Wheezy "Rasbpian" || Linux rpi 3.1.9+ #168 PREEMPT Sat Jul 14 18:56:31 BST 2012 armv6l GNU/Linux ||
 +
|-
 +
|Platinum SDHC 8GB class 10||14.9|| 13.9 || Arch Linux ARM "hf-2013-02-11"|| Linux alarmpi 3.6.11-9-ARCH+ #1 PREEMPT Sat Mar 30 02:38:20 UTC 2013 armv6l GNU/Linux ||
 
|-
 
|-
|Transcend SDHC 4GB Class 10 (TS4GSDHC10) || 17.6 || 12.1 ||Debian Wheezy "Rasbpian" (2012-10-28)  || Linux raspberrypi 3.2.27+ #250 PREEMPT Thu Oct 18 19:03:02 BST 2012 armv6l GNU/Linux ||
+
|Patriot microSDHC 16GB Class 10 (PSF16GMSHC10) ||9.5 ||5.2 ||Fedora 14 ||Linux raspi 3.1.9+ #101 ||init_emmc_clock=200000000 in config.txt
 
|-
 
|-
|Transcend SDHC 16GB Class 10 ||20.3 ||11.9 ||Debian Wheezy "Rasbpian" || Linux raspberry-pi 3.1.9-cutdown+ #173 ||
+
|Patriot SDHC 16GB Class 10 (PSF16GSDHC10) ||19.3 ||9.3 ||Debian Wheezy "Rasbpian" ||Linux raspberrypi 3.1.9+ #168 PREEMPT Sat Jul 14 18:56:31 BST 2012 armv6l GNU/Linux ||
 
|-
 
|-
|Transcend SDHC 16GB Class 10 ||17.4 ||12.0 ||Debian Wheezy (2012-08-08-wheezy-armel)|| Linux raspberrypi 3.2.27+ #160 PREEMPT Mon Sep 17 23:18:42 BST 2012 armv6l GNU/Linux || man:0x000074 oem:0x4a45 name:SDC  hwrev:0x1 fwrev:0x0
+
|Patriot SDHC 32GB Class 10 UHS-1 (PEF32GSDHC10U1) ||20.4 ||12.1 ||Debian Wheezy "Rasbpian" ||Linux raspberrypi 3.1.9+ #168 PREEMPT Sat Jul 14 18:56:31 BST 2012 armv6l GNU/Linux ||
 
|-
 
|-
|Transcend SDHC 16GB Class 10 || 18.6 || 11.2 ||Raspbian Wheezy || Linux raspberrypi 3.12.20+ #687 PREEMPT Fri May 30 16:39:11 BST 2014 armv6l GNU/Linux || hwrev:0x0 fwrev:0x2 man:0x000074 oem:0x4a45
+
|PNY microSDHC 16GB Class 10 (P-SDU16G10-GE) ||17.31 ||11.0 ||Raspbian OS from NOOBS v1.4.0 ||Linux raspberrypi 3.18.7-v7+ #755 SMP PREEMPT Thu Feb 12 17:20:48 GMT 2015 armv7l GNU/Linux ||Tested on Pi 2 Model B by FastEddie 19 Mar 2015
After 2 months of use as a home server
 
 
|-
 
|-
|Transcend SDHC 16GB Class 10 UHS-I Premium 300x ||21.4 ||9.6 ||Debian Rasbpian Wheezy (2013-09-25)|| Linux raspberrypi 3.6.11+ #538 PREEMPT Fri Aug 30 20:42:08 BST 2013 armv6l ||  
+
|Samsung microSDHC 16GB Class 10 (MB-MP16DA/AM) ||17.33 ||13.1 ||Raspbian OS from NOOBS v1.4.0 ||Linux raspberrypi 3.18.7-v7+ #755 SMP PREEMPT Thu Feb 12 17:20:48 GMT 2015 armv7l GNU/Linux ||Tested on Pi 2 Model B by FastEddie 19 Mar 2015
 
|-
 
|-
|Transcend SDHC 32GB Class 10 (TS32GSDHC10E) || 20.3 || 15.3 || Debian Wheezy "Rasbpian" || Linux raspberrypi 3.1.9+ #242 PREEMPT Wed Aug 1 19:47:22 BST 2012 armv6l GNU/Linux || man:0x000074 oem:0x4a45 name:SDC  hwrev:0x1 fwrev:0x0
+
|Samsung SDHC 16GB Class 10 (MB-SPAGA) ||10.7 ||8.8 ||Fedora 17 ARM snapshot 07 May 2012 - GUI release ||Linux fedora-arm 3.1.9 #1 ||Had "long write sync" errors, slow boot times and then system instability using USB port on Macbook, switched to iPhone charger (5V 1A) and warning disappeared
|-
+
|-
|Transcend MicroSDHC 32GB Class 10 UHS-I (Premium 300x)||18.5 ||10.4 ||Debian Wheezy "Rasbpian" ||Linux raspberrypi 3.12.28+ #709 PREEMPT Mon Sep 8 15:28:00 BST 2014 armv6l GNU/Linux ||
+
|Samsung SDHC 16GB Class 10 (MB-SPAGA) ||19.6 ||18.7 || Debian Wheezy "Raspbian" ||Linux raspberrypi 3.1.9+ #168 PREEMPT Sat Jul 14 18:56:31 BST 2012 armvl GNU/Linux ||(Same user / card as above, definitely notable that Raspbian is superior)
|-
+
|-
|Transcend MicroSDXC 64GB Class 10 UHS-I (Premium 300x)||18.5 ||15.7 ||ARM Arch Linux||Linux alarmpi 3.12.28-2-ARCH #1 PREEMPT Mon Sep 22 02:02:11 MDT 2014 armv6l GNU/Linux ||
+
|Samsung SDHC 16GB Class 10 (MB-SPAGC) ||18.5 ||12.2 || Debian XFCE pipplware  ||Linux raspberrypi 3.10.33+ #356 PREEMPT Tue Mar 18 17:35:55 GMT 2014 armv6l GNU/Linux || djayor 9 May 2014
|-
+
|-
|Sandisk Extreme Pro SDHC 8GB Class 10 UHS-I || 21.6 || 21.7 || Arch Linux || Linux alarmpi 3.6.11-11-ARCH+ #1 PREEMPT Tue May 14 16:12:58 UTC 2013 armv6l GNU/Linux || man:0x000003 oem:0x5344 name:SU08G  hwrev:0x8 fwrev:0x0
+
|Samsung SDHC 4GB Class 4 (MB-SS4GA/EU) ||17.7 ||8.1 || Debian Wheezy "Raspbian"  ||Linux raspberrypi 3.10.25+ #622 PREEMPT Fri Jan 3 18:41:00 GMT 2014 armv6l
|-
+
||Markus 2014/02/24
|Sandisk Extreme Pro SDHC 16GB Class 10 UHS-I (SDSDXPA-016G-A75) ||21.6 ||21.7 || Debian Wheezy "Rasbpian" || Linux raspberrypi 3.2.27+ #160 PREEMPT Mon Sep 17 23:18:42 BST 2012 armv6l GNU/Linux ||
+
|-
|-
+
|Samsung microSDHC 4GB Class 6 ( MB-MS04D) || 18.9 || 8.1 || Debian Wheezy "Raspbian" || Linux raspberrypi 3.12.35+ #730 PREEMPT Fri Dec 19 18:31:24 GMT 2014 armv6l GNU/Linux || c 21 Jan 2015
|SanDisk Extreme Pro SDHC 16GB Class 10||20.8||18.6||Debian Wheezy "Raspbian"||Linux raspberrypi 3.1.9+ #125 PREEMPT Sun Jun 17 16:09:36 BST 2012 armv6l GNU/Linux||
+
|-
|-
+
|Samsung microSDHC 8GB Class 6 ( MB-MS08DA/EU) || 17.8 || 6.3 || Debian Wheezy "Raspbian" || Linux Rpi 3.12.24+ #694 PREEMPT Tue Jul 15 17:34:35 BST 2014 armv6l GNU/Linux || Felon 07 July 2014
|Sandisk Ultra SDHC I Class 6 ("30MB/s") ||4.7 ||4.8 ||Debian Wheezy "Raspbian" ||3.2.18+ #3 PREEMPT ||Feels faster than my Kingston 4GB Class 4 card.
+
|-
|-
+
|Samsung SDHC 32GB Class 6 || 21.6 || 17.4 || Debian Wheezy "Raspbian" || Linux raspberrypi 3.6.11+ #474 PREEMPT Thu Jun 13 17:14:42 BST 2013 armv6l GNU/Linux ||
|Sony 8GB SDHC Class 4 || 17.4 || 11.8 || Debian Wheezy Raspbian || Linux 3.1.9+ #272 PREEMPT Tue Aug 7 22:51:44 BST 2012 ||
+
|-
|-
+
|Samsung EVO microSDHC 16GB Class 10 (MB-MP16D) || 17.2 || 8.9 || Debian Wheezy "Raspbian" || Linux raspberrypi 3.12.35+ #730 PREEMPT Fri Dec 19 18:31:24 GMT 2014 armv6l GNU/Linux || B+ model<br>c 22 Jan 2015
|WINTEC FileMate Professional SDHC 16GB Class 10 (3FMSD16GBC10-R) ||4.6 ||4.5 ||Debian Squeeze "debian6-19-04-2012" ||Linux raspberrypi 3.1.9+ #95  PREEMPT Thu May 31 13:21:40 BST 2012 armv6l GNU/Linux ||After installing new kernel with rpi-update on 2012-06-01
+
|-
|-
+
|Samsung EVO microSDHC 16Gb Class 10 (MB-MP16DA/RU) || 19.0 || 14.1 || Arch Linux ARM || Linux alarmpi 4.0.8-3-ARCH #1 SMP PREEMPT Wed Jul 15 19:11:50 MDT 2015 armv7l GNU/Linux || Raspberry Pi 2
|Lexar SDHC 8GB Class 4 "Multi-use" ||18.9 ||6.8 ||Debian Wheezy "Raspbian" ||3.1.9+ #110 PREEMPT ||
+
|-
|-
+
|Samsung EVO PLUS microSDXC 128Gb Class 10 (MB-MC128DA/AMZ) || 17.2 || 17.6 || Debian Jessie "Raspbian" || Linux rpi2 3.18.9-v7+ #1 SMP PREEMPT Tue Aug 18 17:54:28 CEST 2015 armv7l GNU/Linux || Raspberry Pi 2
|Lexar SDHC 8GB Class 6 "PLATINUM II" ||19.7 ||10.1 ||Debian Wheezy "Raspbian" || 3.1.9+ #168 PREEMPT ||
+
|-
|-
+
|Samsung EVO PLUS microSDXC 256Gb Class 10 (MB-MC256DA/EU) || 18.1 || 22.3 || Debian Jessie "Raspbian" || Linux retropie 4.9.35-v7+ #1014 SMP Fri Jun 30 14:47:43 BST armv7l GNU/Linux || Pi 3 Model B
|Lexar SDHC 16GB Class 10 "PLATINUM II" ||5.3 ||4.8 ||Debian Wheezy/sid || Linux raspberrypi 3.2.19-rpi1+ #3 ||
+
|-
|-
+
|Samsung microSDHC 16GB Class 10 (MB-MPAGA/US) || 19.8 || 15.8 || Debian Wheezy "Raspbian" || Linux pisces 3.1.9+ #155 PREEMPT Mon Jul 9 12:49:19 BST 2012 armv6l GNU/Linux ||
|Lexar SDHC 16GB Class 10 "PLATINUM II" ||18.9 ||9.0 ||Debian Wheezy "Raspbian" || Linux raspbian 3.1.9+ #168 PREEMPT || Same card as 'Lexar SDHC 16GB Class 10 "PLATINUM II"' above - imaged with Raspbian
+
|-
|-
+
|Samsung microSDHC 16GB Class 4 (MB-MS4GA/US) || 19.2 || 5.5 || Debian Wheezy "Raspbian" || ? || -
|Lexar SDXC 64GB UHS-I Class 10 Premium series ||20.7 ||15.8 ||Debian Wheezy "Raspbian" ||Linux raspberrypi 3.6.11+ #371 PREEMPT Thu Feb 7 16:31:35 GMT 2013 armv6l GNU/Linux ||
+
|-
|-
+
|Samsung microSDHC 16GB Class 10 (MB-MPAGAEU) || 21.7 || 11.2 || Debian Wheezy "Raspbian" || Linux raspberrypi 3.6.11+ #538 PREEMPT Fri Aug 30 20:42:08 BST 2013 armv6l GNU/Linux || man:0x00001b oem:0x534d name:00000 hwrev:0x1 fwrev:0x0 <br> 512Mb version of Raspberry Pi
|Lexar SDHC 8GB UHS-I Class 10 Premium series ||19.4 ||8.8 ||raspbmc-rls-1.0-hardfp-b20131223-u20131223 ||Linux raspbmc 3.10.24 #2 PREEMPT Mon Dec 23 05:18:12 UTC 2013 armv6l GNU/Linux ||man:0x000028 oem:0x4245 name: hwrev:0x0 fwrev:0x2
+
|-
|-
+
|Samsung PRO microSDHC 16GB Class 10 (MB-MGAGB) || 17.5 || 11.3 || Debian Wheezy "Raspbian" || Linux raspberrypi 3.12.35+ #730 PREEMPT Fri Dec 19 18:31:24 GMT 2014 armv6l GNU/Linux || Model B+
|Mushkin SDHC 16GB Class 10 MKNSDHCC10-16GB ||19.7 ||10.9 ||2012-07-15-wheezy-raspbian ||3.1.9+ #168 PREEMPT ||
+
|-
|-
+
|Samsung PRO PLUS microSDXC 32GB Class 10 (MB-MD32DA/AMZ) || 22.6 || 19.6 || Debian Jessie "Raspbian" || Linux mirror 4.4.50-v7+ #970 SMP Mon Feb 20 19:18:29 GMT 2017 armv7l GNU/Linux || Raspberry Pi 3, FS: ext4, man:0x00001b oem:0x534d name:00000 hwrev:0x1 fwrev:0x0
|PNY SDHC 8GB Class 6 Limited Edition ||7.4 ||13.2 ||Debian Wheezy "Rasbpian" ||Linux raspberrypi 3.1.9+ #168 PREEMPT Sat Jul 14 18:56:31 BST 2012 armv6l GNU/Linux ||
+
|-
|-
+
|Samsung PRO Endurance microSDXC 32GB Class U1 (MB-MJ32GA/AM) || 43.5 || 43.2 || Debian Buster "Raspbian" || Linux 4.19.97-v7l+ #1294 SMP Thu Jan 30 13:21:14 GMT 2020 armv7l GNU/Linux || Raspberry Pi 4B 4GB
|PNY SDHC 32GB Class 10 Elite Performance ||20.4 ||15.4 ||Debian Wheezy "Rasbpian" ||Linux raspberrypi 3.6.11+ #456 PREEMPT armv6l sys v.3.3.3 ||avoid_pwm_pll=1  arm_freq=1000  gpu_freq=675  sdram_freq=500  core_freq=275  over_voltage=6
+
|-
|-
+
|SanDisk Extreme III 2GB Class 10 (BE07054050838) || 23.3 || 21.5 || Raspbmc || Linux raspbmc 3.2.27 #1 PREEMPT Mon Nov 5 20:50:02 UTC arm61 GNU/Linux || 512Mb version of Raspberry Pi
|SanDisk MicroSDHC 4GB ||5.1 ||11.4 ||Debian Wheezy "Rasbpian" ||Linux raspberrypi 3.1.9+ #168 PREEMPT Sat Jul 14 18:56:31 BST 2012 armv6l GNU/Linux ||
+
|-
 +
|SanDisk microSD 2GB ||4.7 ||4.2 ||archlinuxarm-29-04-2012 ||Linux alarmpi 3.1.9+ #66 Thu May 17 16:56:20 BST 2012 ||[http://dl.dropbox.com/u/268147/rpi/SanDisk_2GB_uSD_CDM_Bench.zip CrystalDiskMark results (FAT32)] Card has no serial/is likely a fake.
 +
|-
 +
|SanDisk Ultra SDHC 4GB class 4 ||4.7 ||4.4 ||Raspbian Wheezy || Linux raspberry-pi 3.1.9+ #1 PREEMPT Wed Jun 6 16:26:14 CEST 2012 armv6l GNU/Linux || man:0x000003 oem:0x5344 name:SD04G hwrev:0x8 fwrev:0x0
 +
|-
 +
|SanDisk Ultra II SDHC 4GB class 4 (15 MB/s)||20.9 ||14.6 ||Raspbian Wheezy || Linux raspberry-pi 3.1.9+ ||
 +
|-
 +
|SanDisk SDHC 8GB class 4 ||11.1 ||5.6 ||Raspbian Wheezy || Linux raspberrypi 3.1.9+ #202 PREEMPT || After Hexxeh rpi-update. <br />man:0x000003 oem:0x5344 name:SD08G hwrev:0x8 fwrev:0x0
 +
|-
 +
|SanDisk SDHC 4GB class 4 ||11.15 ||5.15 ||Raspbian Wheezy || Linux raspberrypi 3.6.11+ #456 PREEMPT || man:0x000003 oem:0x5344 name:SD04G hwrev:0x8 fwrev:0x0
 +
|-
 +
|SanDisk SDHC 8GB class 4 ||4.7 ||3.2 ||Debian Squeeze || ||
 +
|-
 +
|SanDisk Ultra SDHC I 8GB class 6 "30MB/s*" ||19.5 || 7.6 ||archlinuxarm || 3.1.9-22-ARCH+ #1 PREEMPT Sun Jun 17 13:54:30 UTC 2012 || "mmc0: error -84 whilst initialising SD card" at bootup, but works fine
 +
|-
 +
|SanDisk Ultra SDHC I 8GB class 10 "30MB/s*" ||19.3 || 3.2 ||Raspbian Wheezy || 3.1.9+ #168 PREEMPT Sat Jul 14 18:56:31 BST 2012 ||
 +
|-
 +
|SanDisk Ultra SDHC I 8GB class 10 "30MB/s* (SDSDU-008G-UQ46)" || 18.6 || 14.5 ||Raspbian GNU/Linux 7 (wheezy) || Linux raspberrypi 3.10.21+ #604 PREEMPT Mon Dec 2 20:17:09 GMT 2013 armv6l GNU/Linux ||
 +
|-
 +
|SanDisk Ultra SDHC I 8GB class 10 "30MB/s*" || 13.6 || 14.5 || raspbmc rc3 || Linux raspbmc 3.1.9-test-12-06 #1 PREEMPT Mon Jun 18 20:07:45 UTC 2012 armv6l GNU/Linux ||
 +
|-
 +
|SanDisk Ultra SDHC II 16GB class 2 "15MB/s*" ||16.7 || 16.2 || Raspbian Wheezy || 3.1.9+ #168 PREEMPT Sat Jul 14 18:56:31 BST 2012 || man:0x000003 oem:0x5344 name:SD16G hwrev:0x8 fwrev:0x0
 +
|-
 +
|SanDisk Ultra SDHC 16GB class 10 UHS-1 "30Mb/s" (SDSDU-016G-U46) ||20.9 ||18.1 ||Raspbian Wheezy || Linux raspberrypi 3.1.9+ #202 PREEMPT || After Hexxeh rpi-update. <br />man:0x000003 oem:0x5344 name:SU16G hwrev:0x8 fwrev:0x0
 +
|-
 +
|SanDisk Ultra SDHC 16GB class 10 "30Mb/s" (SDSDU-016G-U46) ||20.9 ||10.9 ||Raspbian Wheezy || Linux raspberrypi 3.6.11+ #371 PREEMPT ||
 +
|-
 +
|SanDisk Ultra SDHC 16GB class 10 (SDSDQUAN-016G-G4A) ||18.8 ||13.4 || 2015-02-16-wheezy-raspbian || Linux rpi 3.18.9-v7+ #767 SMP PREEMPT || read test is done with dropped cache, write test is done with sync;  man:0x000003 oem:0x5344 name:SU16G hwrev:0x8 fwrev:0x0
 +
|-
 +
|SanDisk microSDHC 16GB class 4 (SDSDQ-016G) || 18.3 || 7.5 || 2015-02-16-wheezy-raspbian || Linux raspberrypi 3.18.7-v7+ #755 SMP PREEMPT Thu Feb 12 17:20:48 GMT 2015 armv7l GNU/Linux || man:0x000003 oem:0x5344 name:SU16G hwrev:0x8 fwrev:0x0
 +
|-
 +
|SanDisk microSDHC 16GB class 10 (SDSDQUIP-016G-A46) ||18.01 ||17.9 || Raspbian OS from NOOBS v1.4.0 || Linux raspberrypi 3.18.7-v7+ #755 SMP PREEMPT Thu Feb 12 17:20:48 GMT 2015 armv7l GNU/Linux || Tested on Pi 2 Model B by FastEddie 19 Mar 2015
 +
|-
 +
|SanDisk Extreme microSDHC 32GB UHS-1 U3 (SDSQXNE-032G-GN6AA) ||22.8||25.2|| Raspbian Jessie || Linux raspberrypi 4.4.11-v7+ #888 SMP Mon May 23 20:10:33 BST 2016 armv7l GNU/Linux || fresh installation for speedcheck. 2016-09-09 on Raspberry Pi 2
 +
|-
 +
|SanDisk Ultra microSDHC 32GB UHS-1 (SDSDQUA-032G-A46A) ||17.5||11.8|| Ubuntu-Mate|| Linux 3.18.0-20-rp12 #21 Ubuntu SMP PREEMPT Apr 5 2015 armv71 GNU/Linux || man:0x000003 oem:0x5344 name:SL32G hwrev:0x8 fwrev:0x0
 +
|-
 +
|SanDisk Ultra SDHC 32GB class 10 "30Mb/s" (SDSDU-032G-U46) ||18.3 ||8.8 ||Raspbian Wheezy || Linux raspberrypi 3.12.19+ #684 PREEMPT || man:0x000003 oem:0x5344 name:SU32G hwrev:0x8 fwrev:0x0
 +
|-
 +
|SanDisk Ultra 32GB SDHC Class 10 UHS-I A1 (SDSQUAR-032G-GN6MA) ||19.3||23.5||Raspbian Stretch GNU/Linux 9.4|| Linux retropie 4.14.30-v7+ #1102 SMP Mon Mar 26 16:45:49 BST 2018 armv7l GNU/Linux || Tested on Pi 3 Model B+, 2018-14-04 RetroPie 4.4 (man:0x000003 oem:0x5344 name:SC32G hwrev:0x8 fwrev:0x0)
 +
|-
 +
|SanDisk Ultra SDHC 16GB class 10 "30MB/s" (SDSDU-016G-U46S)  ||21.6 ||15.2 || 2013-02-09-wheezy-raspbian || Linux raspberrypi 3.6.11+ #371 PREEMPT Thu Feb 7 16:31:35 GMT 2013 armv6l GNU/Linux || man:0x000003 oem:0x5344 name:SU16G hwrev:0x8 fwrev:0x0
 +
|-
 +
|SanDisk Extreme SDHC I 4GB class 10 "30MB/s" || 19.7 || 21.0 || 2012-07-15-wheezy-raspbian || Linux raspberrypi 3.1.9+ #168 PREEMPT Sat Jul 14 18:56:31 BST 2012 armv6l GNU/Linux || Only boots with images with new firmware, didn't boot with previous images.
 +
|-
 +
|SanDisk Extreme SDHC I 8GB class 10 "30MB/s" || 17.7 || 19.7 || Archlinuxarm 2012-06-13 || Linux raspi 3.1.9-28-ARCH+ #1 PREEMPT Fri Jul 6 23:07:26 UTC 2012 armv6l GNU/Linux ||
 +
|-
 +
|SanDisk Extreme SDHC I 8GB class 10 "30MB/s" || 17.2 || 10.6 || RISC OS 5.21 (04-Jun-2014) || RC12a ||
 +
|-
 +
|SanDisk Extreme SDHC UHS-I 32GB class 10 "30MB/s" || 21.4 / 18.4 || 19.5 / 22.2 || 2012-10-28-wheezy-raspbian || Linux raspberrypi 3.2.27+ #250 PREEMPT Thu Oct 18 19:03:02 BST 2012 armv6l GNU/Linux ||
 +
|-
 +
|SanDisk microSDHC UHS-I 32GB class 10 "30MB/s" || 21.1 || 10.9 || 2013-02-09 Debian Wheezy "Raspbian" || Linux raspberrypi 3.6.11+ #371 PREEMPT Thu Feb 7 16:31:35 GMT 2013 armv6l GNU/Linux ||
 +
|-
 +
|SanDisk Ultra microSDHC 32GB class 10 "48MB/s" (SDSDQUN-032G-FFP-A)|| 18.5 || 10.8 || Debian Wheezy "Raspbian" || Linux raspberrypi 3.12.28+ #709 PREEMPT Mon Sep 8 15:28:00 BST 2014 armv6l GNU/Linux || Raspberry Pi B+, 2014-12-20
 +
|-
 +
|SanDisk Ultra microSDHC 32GB class 10 "48MB/s" (SDSDQUAN-032G-C4A)|| 18.9 || 16.73 || Debian Wheezy "Raspbian" || Linux raspberrypi 3.18.5+ #744 PREEMPT Fri Jan 30 18:19:07 GMT 2015 armv6l GNU/Linux || Raspberry Pi B, 2015-02-12
 +
|-
 +
|SanDisk Ultra microSDHC 32GB class 10 "48MB/s" (SDSDQUIN-032G-G4)|| 18.9 || 13.13 || Raspbian Jessie || Linux 4.1.7-v7+ #817 SMP PREEMPT Sat Sep 19 15:32:00 BST 2015 armv7l GNU/Linux || Raspberry Pi 2 B, man:0x000003 oem:0x5344 name:SL32G hwrev:0x8 fwrev:0x0, 2015-10-13
 +
|-
 +
|SanDisk Extreme SDHC UHS-I 16GB class 10 "45MB/s" (SDSDX-016G-X46) || 21.1 || 20.8 || 2012-09-18-wheezy-raspbian || Linux raspberrypi 3.2.27+ #160 PREEMPT Mon Sep 17 23:18:42 BST 2012 armv6l GNU/Linux || man:0x000003 oem:0x5344 name:SU16G hwrev:0x8 fwrev:0x0
 +
|-
 +
|Sandisk Extreme microSDHC UHS-I 16GB || 18.8 || 18.2 || 2014-09-09-wheezy-raspbian on Model B+  || Linux raspberrypi 3.12.28+ #709 PREEMPT Mon Sep 8 15:28:00 BST 2014 armv6l GNU/Linux || man:0x000003 oem:0x5344 name:SE16G hwrev:0x8 fwrev:0x0
 +
|-
 +
|SanDisk Extreme SDHC UHS-I 32GB class 10 "45MB/s" (SDSDX-032G-X46) || 20.96 || 17.9 || 2013-05-20-wheezy-raspabian || Linux raspberrypi 3.6.11+ #456 PREEMPT || man:0x000003 oem:0x5344 name:SU32G hwrev:0x8 fwrev:0x0
 +
|-
 +
|SanDisk Extreme PLUS SDHC UHS-I 32GB class 10 "80MB/s" (SDSDXS-032G-A46) || 18.7 || 16.5 || Debian Wheezy "Raspbian" || Linux raspberrypi 3.12.22+ #691 PREEMPT Wed Jun 18 18:29:58 BST 2014 armv6l GNU/Linux || man:0x000003 oem:0x5344 name:SE32G hwrev:0x8 fwrev:0x0
 +
|-
 +
|SanDisk SDHC 32GB class 6 ||4.6 ||4.8 || || ||
 +
|-
 +
|SanDisk uSDXC 64GB class 6 ||4.9 ||3.8 ||archlinuxarm-29-04-2012 ||Linux alarmpi 3.1.9+ #66 Thu May 17 16:56:20 BST 2012 ||[http://dl.dropbox.com/u/268147/rpi/SanDisk_64GB_uSDXC_CDM_Bench.zip CrystalDiskMark results (FAT32)]
 +
|-
 +
|SanDisk Ultra SDXC 64GB class 10 (SDSDQUAN-064G-G4A) ||17.9 ||14.5 ||Raspbian 2015-02-16 ||Linux raspberrypi 3.18.8-v7+ ||
 +
|-
 +
|SanDisk Extreme SDXC 64GB class 10 (SDSDQXN-064G-G46A) ||17.4 ||20.9 ||Raspbian 2015-02-16 ||Linux raspberrypi 3.18.8-v7+ ||
 +
|-
 +
|SanDisk Industrial XI micro SDHC I 16GB class 10 (SDSDQED-016G-XI) ||23,4 ||27,0 ||Raspbian GNU/Linux 9.6 (stretch) ||Linux raspberrypi 4.14.79-v7+ #1159 SMP Sun Nov 4 17:50:20 GMT 2018 armv7l GNU/Linux ||Raspberry Pi 3 B+ <br/>
 +
man:0x000003 oem:0x5344 name:WD16G hwrev:0x8 fwrev:0x0
 +
|-
 +
|SanDisk Industrial XI micro SDHC I 64GB class 10 (SDSDQED-064G-XI) ||23,4 ||26,9 ||Raspbian GNU/Linux 9.6 (stretch) ||Linux sitradinbox 4.14.79-v7+ #1159 SMP Sun Nov 4 17:50:20 GMT 2018 armv7l GNU/Linux ||Raspberry Pi 3 B+ <br/>
 +
man:0x000003 oem:0x5344 name:WD64G hwrev:0x8 fwrev:0x0
 +
|-
 +
|Silicon Power 8GB class 10 (SP008GBSDH010V10) || 15.6 || 11.7 || Debian Wheezy "Raspbian" (2012-12-16) || Linux raspberrypi 3.2.27+ #250 PREEMPT Thu Oct 18 19:03:02 BST 2012 armv6l GNU/Linux ||
 +
|-
 +
|Sony 8GB class 10 (SF-8UY/TQ1) || 20.9 || 13.4 || Debian Wheezy "Raspbian" (2013-09-25) || Linux raspberrypi 3.6.11+ #538 PREEMPT Fri Aug 30 20:42:08 BST 2013 armv6l GNU/Linux ||man:0x000082 oem:0x4a54 name:NCard hwrev:0x0 fwrev:0x2
 +
|-
 +
|Sony 64GB class 10 (SR-64UY) || 15.8 || 17.5 || Debian Wheezy "Raspbian" (2015-02-16) || Linux raspberrypi 3.18.8-v7+ ||
 +
|-
 +
|TakeMS SDXC 64GB, Class 10 ||16.9 ||8.2 ||Debian Wheezy "Raspbian" (2013-06-02) ||Linux pisys 3.6.11+ #456 PREEMPT Mon May 20 17:42:15 BST 2013 armv6l GNU/Linux || Pi B overclocked arm_freq=1000 core_freq=500 sdram_freq=600 over_voltage=6
 +
|-
 +
|TDK microSDHC 4GB, Class 4 (80-56-10301-004G) ||11.2 ||4.7 ||Debian Wheezy "Raspbian" (2012-07-15) ||3.1.9+ #168 PREEMPT Sat Jul 14 18:56:31 BST 2012 ||
 +
|-
 +
|Toshiba microSDHC 4GB Class 4 ||17.8 ||10.4 ||Debian Wheezy "Raspbian" ||Linux raspberrypi 3.12.28+ #709 PREEMPT Mon Sep 8 15:28:00 BST 2014 armv6l GNU/Linux ||
 +
|-
 +
|Toshiba microSDHC 32GB Class 4 (C32GJ-BL5A)||16.0 ||6.4 ||Debian Wheezy "Raspbian" ||Linux raspberrypi 3.18.7-v7+ #755 SMP PREEMPT Thu Feb 12 17:20:48 GMT 2015 armv7l GNU/Linux || Work Fine on Raspberry Pi 2
 +
|-
 +
|Toshiba SD-T16G SDHC 16GB, Class 10 (1046 US7022 C) ||20.6 ||13.5 ||Debian Wheezy "Raspbian" ||3.1.9+ #272 PREEMPT Tue Aug 7 22:51:44 BST 2012 armv6l GNU/Linux ||
 +
|-
 +
|Toshiba microSDXC 64GB (SD-C064GR7AR30) ||14.7 ||10.5 ||Raspbian 2015-02-16 ||Linux raspberrypi 3.18.8-v7+ ||
 +
|-
 +
|Toshiba MicroSDXC 64GB Class 10 U3 (THN-M302R0640EA)||20.9 ||17.1 || Raspbian Jessie ||Linux RPi 4.4.38-v7+ #938 SMP Thu Dec 15 15:22:21 GMT 2016 armv7l GNU/Linux|| Works fine with Raspberry Pi 3
 +
|-
 +
|Transcend microSDHC 16GB Class 10 (16GBBEU300A) || 17.7 || 9 || Debian Wheezey 7.6 "Raspbian" || Linux raspbian 3.12.28+ #709 PREEMPT Mon Sep 8 15:28:00 UTC 2014 armv6l GNU/Linux || 2014-10-05 by @xhark
 +
|-
 +
|Transcend SDHC 8GB Class 10 (TS8GSDHC10E) || 22.2 || 17.1 || 2013-04-22 Raspbmc || Linux raspbmc 3.6.11 #2 PREEMPT Wed Mar 13 17:12:47 UTC 2013 armv6l GNU/Linux || Pi overclocked toarm_freq=840, core_freq=350, gpu_freq=253
 +
|-
 +
|Transcend SDHC 8GB Class 10 (TS8GSDHC10E) ||15.9||17.5||Debian Wheezy "Raspbian"||Linux RaspberryPi 3.12.22+ #691 PREEMPT Wed Jun 18 18:29:58 BST 2014 armv6l GNU/Linux||stock clock speed
 +
|-
 +
|Transcend microSDHC 8GB Class 10 (TS8GUSDHC10) || 20.2 || 11.2 || Debian Wheezy "Raspbian" || Linux raspberrypi 3.1.9+ #272 PREEMPT Tue Aug 7 22:51:44 BST 2012 armv6l GNU/Linux ||
 +
|-
 +
|Transcend SDHC 8GB class 6 ||5.8 ||5.8 || || ||
 +
|-
 +
|Transcend SDHC 8GB Class 6 (TS8GSDHC6) ||4.6 ||4.0 ||Debian Squeeze "debian6-19-04-2012" ||Linux raspberrypi 3.1.9+ #90 Wed Apr 18 18:23:05 BST 2012  armv61 GNU/Linux ||Tested with dd. Card doesn't maintain the promised minimum class speed.
 +
|-
 +
|Transcend SDHC 8GB Class 4 (TS8GSDHC4) ||11.1 ||8.1 ||Debian Wheezy "Rasbpian" ||Linux raspberrypi 3.1.9+ #168 PREEMPT Sat Jul 14 18:56:31 BST 2012 armv6l GNU/Linux ||man:0x000003 oem:0x5344 name:SD08G hwrev:0x8 fwrev:0x0
 +
|-
 +
|Transcend microSDHC 8GB Kit, Class 4 (TS8GUSDHC4)||4.7 ||3.7 ||Raspbian Wheezy || Linux raspberry-pi 3.1.9+ #1 PREEMPT Wed Jun 6 16:26:14 CEST 2012 armv6l GNU/Linux || man:0x000003 oem:0x5344 name:SU08G hwrev:0x8 fwrev:0x0
 +
|-
 +
|Transcend SDHC 8GB Class 10 (TS8GSDHC10) ||4.6 ||4.6 ||Debian Squeeze "debian6-19-04-2012" ||Linux raspberrypi 3.1.9+ armv61 GNU/Linux ||
 +
|-
 +
|Transcend SDHC 8GB Class 10 (TS8GSDHC10) ||19.5 ||18.5 ||Debian Wheezy "Raspbian" ||Linux raspberrypi 3.1.9+ #168 PREEMPT Tue Aug 7 22:51:44 BST 2012 armv6l GNU/Linux ||
 +
|-
 +
|Transcend SDHC 8GB Class 10 (TS8GSDU1) UHC-I X300 ||20.9 ||13.1 ||Linux alarmpi 3.6.11-14-ARCH+ #1 PREEMPT Sun Jul 21 17:39:58 CDT 2013 armv6l GNU/Linux ||Arch Linux ||
 +
|-
 +
|Transcend SDHC 8GB Class 10 (TS8GSDHC10U1) UHC-I X600 ||21.1 ||15 ||Linux alarmpi 3.6.11-14-ARCH+ #1 PREEMPT Sun Jul 21 17:39:58 CDT 2013 armv6l GNU/Linux ||Arch Linux ||
 +
|-
 +
|Transcend SDHC 8GB Class 10 (TS8GSDHC10U1) UHC-I X600 ||18.5 ||12.4 ||Debian Wheezy (Raspbian 2014-01-07) ||Linux raspi 3.10.25+ #622 PREEMPT Fri Jan 3 18:41:00 GMT 2014 armv6l GNU/Linux ||man:0x000074 oem:0x4a45 name:SDU1 hwrev:0x0 fwrev:0x2
 +
|-
 +
|Transcend SDHC 4GB Class 6 ||9.8 ||8.8 ||Fedora Remix FC14 ||Linux raspi 3.1.9 #1 PREEMPT Sat Mar 3 21:58:00 UTC 2012 armv6l armv6l armv6l GNU/Linux ||Not sure why this setup is faster than others, test results repeatable.
 +
|-
 +
|Transcend SDHC 4GB Class 10 (TS4GSDHC10) || 17.6 || 12.1 ||Debian Wheezy "Raspbian" (2012-10-28)  || Linux raspberrypi 3.2.27+ #250 PREEMPT Thu Oct 18 19:03:02 BST 2012 armv6l GNU/Linux ||
 +
|-
 +
|Transcend SDHC 16GB Class 10 ||20.3 ||11.9 ||Debian Wheezy "Raspbian" || Linux raspberry-pi 3.1.9-cutdown+ #173 ||
 +
|-
 +
|Transcend SDHC 16GB Class 10 (TS16GSDHC10) ||17.6 ||4.7 ||Debian Wheezy "Raspbian" || Linux raspbx 3.18.6+ #753 PREEMPT Sun Feb 8 14:47:22 GMT 2015 armv6l GNU/Linux || man:0x00001e oem:0x4142 name:SDC  hwrev:0x1 fwrev:0x0, FreePbx was running
 +
|-
 +
|Transcend SDHC 16GB Class 10 ||17.4 ||12.0 ||Debian Wheezy (2012-08-08-wheezy-armel)|| Linux raspberrypi 3.2.27+ #160 PREEMPT Mon Sep 17 23:18:42 BST 2012 armv6l GNU/Linux || man:0x000074 oem:0x4a45 name:SDC  hwrev:0x1 fwrev:0x0
 +
|-
 +
|Transcend microSDHC 16GB Class 10 || 17.96 || 16.4 ||Raspbian OS from NOOBS v1.4.0 || Linux raspberrypi 3.18.7-v7+ #755 SMP PREEMPT Thu Feb 12 17:20:48 GMT 2015 armv7l GNU/Linux || Tested on Pi 2 Model B by FastEddie 19 Mar 2015
 +
|-
 +
|Transcend SDHC 16GB Class 10 || 18.6 || 11.2 ||Raspbian Wheezy || Linux raspberrypi 3.12.20+ #687 PREEMPT Fri May 30 16:39:11 BST 2014 armv6l GNU/Linux || hwrev:0x0 fwrev:0x2 man:0x000074 oem:0x4a45
 +
After 2 months of use as a home server
 +
|-
 +
|Transcend SDHC 16GB Class 10 UHS-I Premium 300x ||21.4 ||9.6 ||Debian Rasbpian Wheezy (2013-09-25)|| Linux raspberrypi 3.6.11+ #538 PREEMPT Fri Aug 30 20:42:08 BST 2013 armv6l ||
 +
|-
 +
|Transcend SDHC 32GB Class 10 (TS32GSDHC10E) || 20.3 || 15.3 || Debian Wheezy "Rasbpian" || Linux raspberrypi 3.1.9+ #242 PREEMPT Wed Aug 1 19:47:22 BST 2012 armv6l GNU/Linux || man:0x000074 oem:0x4a45 name:SDC  hwrev:0x1 fwrev:0x0
 +
|-
 +
|Transcend MicroSDHC 32GB Class 10 UHS-I (Premium 300x)||18.5 ||10.4 ||Debian Wheezy "Rasbpian" ||Linux raspberrypi 3.12.28+ #709 PREEMPT Mon Sep 8 15:28:00 BST 2014 armv6l GNU/Linux ||
 +
|-
 +
|Transcend MicroSDXC 64GB Class 10 UHS-I (Premium 300x)||18.5 ||15.7 ||ARM Arch Linux||Linux alarmpi 3.12.28-2-ARCH #1 PREEMPT Mon Sep 22 02:02:11 MDT 2014 armv6l GNU/Linux ||
 +
|-
 +
|Sandisk Extreme Pro SDHC 8GB Class 10 UHS-I || 21.6 || 21.7 || Arch Linux || Linux alarmpi 3.6.11-11-ARCH+ #1 PREEMPT Tue May 14 16:12:58 UTC 2013 armv6l GNU/Linux || man:0x000003 oem:0x5344 name:SU08G  hwrev:0x8 fwrev:0x0
 +
|-
 +
|Sandisk Extreme Pro SDHC 16GB Class 10 UHS-I (SDSDXPA-016G-A75) ||21.6 ||21.7 || Debian Wheezy "Rasbpian" || Linux raspberrypi 3.2.27+ #160 PREEMPT Mon Sep 17 23:18:42 BST 2012 armv6l GNU/Linux  ||
 +
|-
 +
|SanDisk Extreme Pro SDHC 16GB Class 10||20.8||18.6||Debian Wheezy "Raspbian"||Linux raspberrypi 3.1.9+ #125 PREEMPT Sun Jun 17 16:09:36 BST 2012 armv6l GNU/Linux||
 +
|-
 +
|Sandisk Ultra SDHC I Class 6 ("30MB/s") ||4.7 ||4.8 ||Debian Wheezy "Raspbian" ||3.2.18+ #3 PREEMPT ||Feels faster than my Kingston 4GB Class 4 card.
 +
|-
 +
|Sony 8GB SDHC Class 4 || 17.4 || 11.8 || Debian Wheezy Raspbian || Linux 3.1.9+ #272 PREEMPT Tue Aug 7 22:51:44 BST 2012 ||
 +
|-
 +
|WINTEC FileMate Professional SDHC 16GB Class 10 (3FMSD16GBC10-R) ||4.6 ||4.5 ||Debian Squeeze "debian6-19-04-2012" ||Linux raspberrypi 3.1.9+ #95  PREEMPT Thu May 31 13:21:40 BST 2012 armv6l GNU/Linux ||After installing new kernel with rpi-update on 2012-06-01
 +
|-
 +
|Lexar SDHC 8GB Class 4 "Multi-use" ||18.9 ||6.8 ||Debian Wheezy "Raspbian" ||3.1.9+ #110 PREEMPT ||
 +
|-
 +
|Lexar SDHC 8GB Class 6 "PLATINUM II" ||19.7 ||10.1 ||Debian Wheezy "Raspbian" || 3.1.9+ #168 PREEMPT ||
 +
|-
 +
|Lexar SDHC 16GB Class 10 "PLATINUM II" ||5.3 ||4.8 ||Debian Wheezy/sid || Linux raspberrypi 3.2.19-rpi1+ #3 ||
 +
|-
 +
|Lexar SDHC 16GB Class 10 "PLATINUM II" ||18.9 ||9.0 ||Debian Wheezy "Raspbian" || Linux raspbian 3.1.9+ #168 PREEMPT || Same card as 'Lexar SDHC 16GB Class 10 "PLATINUM II"' above - imaged with Raspbian
 +
|-
 +
|Lexar SDXC 64GB UHS-I Class 10 Premium series ||20.7 ||15.8 ||Debian Wheezy "Raspbian" ||Linux raspberrypi 3.6.11+ #371 PREEMPT Thu Feb 7 16:31:35 GMT 2013 armv6l GNU/Linux ||
 +
|-
 +
|Lexar SDHC 8GB UHS-I Class 10 Premium series ||19.4 ||8.8 ||raspbmc-rls-1.0-hardfp-b20131223-u20131223 ||Linux raspbmc 3.10.24 #2 PREEMPT Mon Dec 23 05:18:12 UTC 2013 armv6l GNU/Linux ||man:0x000028 oem:0x4245 name: hwrev:0x0 fwrev:0x2
 +
|-
 +
|Mushkin SDHC 16GB Class 10 MKNSDHCC10-16GB ||19.7 ||10.9 ||2012-07-15-wheezy-raspbian ||3.1.9+ #168 PREEMPT ||
 +
|-
 +
|PNY SDHC 8GB Class 6 Limited Edition ||7.4 ||13.2 ||Debian Wheezy "Raspbian" ||Linux raspberrypi 3.1.9+ #168 PREEMPT Sat Jul 14 18:56:31 BST 2012 armv6l GNU/Linux ||
 +
|-
 +
|PNY SDHC 32GB Class 10 Elite Performance ||20.4 ||15.4 ||Debian Wheezy "Raspbian" ||Linux raspberrypi 3.6.11+ #456 PREEMPT armv6l sys v.3.3.3 ||avoid_pwm_pll=1  arm_freq=1000  gpu_freq=675  sdram_freq=500  core_freq=275  over_voltage=6
 +
|-
 +
|SanDisk MicroSDHC 4GB ||5.1 ||11.4 ||Debian Wheezy "Rasbpian" ||Linux raspberrypi 3.1.9+ #168 PREEMPT Sat Jul 14 18:56:31 BST 2012 armv6l GNU/Linux ||
 +
|-
 +
|SanDisk UHS-I C10 Ultra SDHC 8GB (SDSDU-008G-U46)||19.1 ||20.8 ||Debian Wheezy "Raspbian" ||Linux raspberrypi 3.1.9+ #272 PREEMPT Tue Aug 7 22:51:44 BST 2012 armv6l GNU/Linux ||
 +
|-
 +
|SanDisk Ultra SDHC 8GB class 10 (30 MB/s) ||21.7 ||15.7 ||Debian Wheezy "Raspbian" ||Linux raspberrypi 3.6.11+ #434 PREEMPT Wed May 1 21:13:52 BST 2013 armv6l GNU/Linux || man:0x000003 oem:0x5344 name:SU08G hwrev:0x8 fwrev:0x0 (some read time trials with drop caches: 21.0/21.7/21.8/21.8/21.8/21.8/(write#2:)21.7; two write trials: 15.7/15.8; timings (dd;sync): 33.761;5.799)
 +
|-
 +
|Panasonic SDHC 4GB Class 10 UHS-I ||11.2 ||6.2 ||Debian Wheezy "Raspbian" ||3.1.9+ #144 PREEMPT || Panasonic RP-SDU04GE1K
 +
|-
 +
|Sony SDHC 8GB Class 10 UHS-1 ||20.8 ||17.2 ||Debian Wheezy "Raspbian" ||3.2.27+ #250 PREEMPT ||
 +
|-
 +
|Sony SDHC 4Gb Class 10 UHS-I "40MB/s" (SF-4UY) ||18.8 ||10.3 ||openELEC 3.0.6 ||Linux openelecPi 3.6.11 #1 PREEMPT Thu Jun 13 21:32:37 CEST 2013 armv6l GNU/Linux ||man:0x000027 oem:0x5048 name:SD04G hwrev:0x3 fwrev:0x0
 +
|-
 +
|Sony SDHC 8Gb Class 10 UHS-I "90MB/s" (SF-8UX) ||21.1 ||16.9 ||Raspbian 2013-05-25-wheezy ||Linux raspberrypi 3.6.11+ #456 PREEMPT Mon May 20 17:42:15 BST 2013 armv6l GNU/Linux ||man:0x000082 oem:0x4a54 name:NCard hwrev:0x0 fwrev:0x0
 +
|-
 +
|Sony SDHC 16Gb Class 10 UHS-I "40MB/s" ||21.8 ||13.5 ||Raspbian 2013-07-26-wheezy ||Linux raspberrypi 3.6.11+ #474 PREEMPT Thu Jun 13 17:14:42 BST 2013 armv6l GNU/Linux ||
 +
|-
 +
|SanDisk Ultra 16GB MicroSDHC Class 10 UHS-1 + Adapter "30MB/s" (SDSDQUA-016G-U46A) ||18.5 ||7.3 ||Raspbian 2014-01-07 wheezy ||Linux mmmpie 3.10.25+ #622 PREEMPT Fri Jan 3 18:41:00 GMT 2014 armv6l GNU/Linux ||
 
|-
 
|-
|SanDisk UHS-I C10 Ultra SDHC 8GB (SDSDU-008G-U46)||19.1 ||20.8 ||Debian Wheezy "Rasbpian" ||Linux raspberrypi 3.1.9+ #272 PREEMPT Tue Aug 7 22:51:44 BST 2012 armv6l GNU/Linux ||
+
|SanDisk Ultra 8GB MicroSDHC Class 10 UHS-1 + Adapter "48MB/s" (SDSDQUAN-008G-G4A) ||18.8 ||14.5 ||Raspbian 2014-12-24 wheezy ||Linux raspberrypi 3.12.35+ #730 PREEMPT Fri Dec 19 18:31:24 GMT 2014 armv6l GNU/Linux ||
 
|-
 
|-
|SanDisk Ultra SDHC 8GB class 10 (30 MB/s) ||21.7 ||15.7 ||Debian Wheezy "Raspbian" ||Linux raspberrypi 3.6.11+ #434 PREEMPT Wed May 1 21:13:52 BST 2013 armv6l GNU/Linux || man:0x000003 oem:0x5344 name:SU08G hwrev:0x8 fwrev:0x0 (some read time trials with drop caches: 21.0/21.7/21.8/21.8/21.8/21.8/(write#2:)21.7; two write trials: 15.7/15.8; timings (dd;sync): 33.761;5.799)
+
|SanDisk Extreme 16GB UHS-I/U3 Micro SDHC Memory Card Up to 60MB/s Read with Adapter- SDSDQXN-016G-G46A ||20.3 ||18.2 ||OpenELEC 5.0.1 ||Linux OptimusPi 3.18.5 #1 SMP PREEMPT Sun Feb 1 14:59:37 CET 2015 armv7l GNU/Linux ||Raspberry Pi 2
 
|-
 
|-
|Panasonic SDHC 4GB Class 10 UHS-I ||11.2 ||6.2 ||Debian Wheezy "Raspbian" ||3.1.9+ #144 PREEMPT || Panasonic RP-SDU04GE1K
+
|SanDisk Extreme 16GB UHS-I/U3 Micro SDHC - SDSDQXN-016G-G46A ||19.2 ||25.4 ||Raspbian 2015-02-16 wheezy ||Linux raspberrypi 3.18.7-v7+ #755 SMP PREEMPT Thu Feb 12 17:20:48 GMT 2015 armv7l GNU/Linux ||Raspberry Pi 2
 
|-
 
|-
|Sony SDHC 8GB Class 10 UHS-1 ||20.8 ||17.2 ||Debian Wheezy "Raspbian" ||3.2.27+ #250 PREEMPT ||
+
|SanDisk Extreme 16GB UHS-I/U3 Micro SDHC Memory Card Up to 60MB/s Read with Adapter- SDSDQXN-016G-G46A ||19.8 ||24.7 ||OSMC Alpha 4 ||Linux osmc 3.18.5-v7+ #225 SMP PREEMPT Fri Jan 30 18:53:55 GMT 2015 armv7l GNU/Linux ||Raspberry Pi 2
 
|-
 
|-
|Sony SDHC 4Gb Class 10 UHS-I "40MB/s" (SF-4UY) ||18.8 ||10.3 ||openELEC 3.0.6 ||Linux openelecPi 3.6.11 #1 PREEMPT Thu Jun 13 21:32:37 CEST 2013 armv6l GNU/Linux ||man:0x000027 oem:0x5048 name:SD04G hwrev:0x3 fwrev:0x0
+
|SanDisk Extreme 16GB UHS-I Micro SDHC Memory Card Up to 90MB/s - SDSQXNE-016G-GN6MA ||19.3 ||22.8 ||Raspbian ||Linux raspberrypi 4.1.17-v7+ #838 SMP Tue Feb 9 13:15:09 GMT 2016 armv7l GNU/Linux ||Raspberry Pi 2
 
|-
 
|-
|Sony SDHC 8Gb Class 10 UHS-I "90MB/s" (SF-8UX) ||21.1 ||16.9 ||Raspbian 2013-05-25-wheezy ||Linux raspberrypi 3.6.11+ #456 PREEMPT Mon May 20 17:42:15 BST 2013 armv6l GNU/Linux ||man:0x000082 oem:0x4a54 name:NCard hwrev:0x0 fwrev:0x0
+
! SD Card !! Read (MB/s) !! Write (MB/s) !! Distro !!  Kernel !!  Notes
|-
 
|Sony SDHC 16Gb Class 10 UHS-I "40MB/s" ||21.8 ||13.5 ||Raspbian 2013-07-26-wheezy ||Linux raspberrypi 3.6.11+ #474 PREEMPT Thu Jun 13 17:14:42 BST 2013 armv6l GNU/Linux ||
 
|-
 
|SanDisk Ultra 16GB MicroSDHC Class 10 UHS-1 + Adapter "30MB/s" (SDSDQUA-016G-U46A) ||18.5 ||7.3 ||Raspbian 2014-01-07 wheezy ||Linux mmmpie 3.10.25+ #622 PREEMPT Fri Jan 3 18:41:00 GMT 2014 armv6l GNU/Linux ||
 
 
|}
 
|}
  

Revision as of 06:03, 31 March 2021

SD cards

The SD card is a key part of the Raspberry Pi; it provides the initial storage for the Operating System and files. Storage can be extended through many types of USB connected peripherals.

When the Raspberry Pi is 'switched on', i.e. connected to a power supply, a special piece of code called the bootloader is executed, which reads more special code from the SD card that is used to start up the Raspberry Pi. If there is no SD card inserted, it will not start. Do NOT push in or pull out an SD card while the Raspberry Pi is connected to the power, as this is likely to corrupt the SD card data (you might get away with it, but it is best not to).

The SD card must be formatted, or written to, in a special way that means the Raspberry Pi can read the data it needs to start properly. If you are new to this check the instructions, or buy a pre-formatted SD card.

One advantage to using an SD card like this is that you can have several SD cards, each with a different operating system, or a different purpose. Simply power off, switch cards, and reconnect the power. You have a different computer to play with.

Please bear in mind that the maximum throughput of the card reader of the Raspberry Pi is 25 MB/s and that most likely read and write speed won't exceed 22 MB/s.

Which SD card?

SD card sizes

SD cards come in three physical sizes (see picture). The Raspberry Pi A and B use the largest one; the miniSD card and the MicroSD card can be used in those models, but you will need an adapter / holder to fit it. The Raspberry Pi B+ and Raspberry Pi 2 Model B (second generation) require the smallest one, the MicroSD.

SD cards come in a range of storage sizes. You will likely need more than 2 GB.

There are other properties of SD cards that are not covered here. Read the Wikipedia article for those details.

Other SD card content

See the following links for other information:

Preinstalled SD cards

You might like to consider buying a preinstalled card; a wide range of branded SD cards preinstalled with operating systems are available. If you don't buy a preinstalled card, you will have to create one yourself. Check the SD Card setup page to help you make this decision. That page also shows where these cards can be bought from.

Verification

Users have listed working and non-working cards here. The SD Card Association suggests there are more than 400 brands across dozens of product categories and more than 8,000 models. These are just a few.

Is this reliable?

Unfortunately there is little scope for analysis of the failures given below. There are several reasons why a card may not work. You will notice that the same card may be shown as working and not working; the model numbers on cards do seem to be confusing.

  • the firmware / bootloader on early Raspberry Pi boards had a problem with Class 10 high speed cards. This has been fixed.
  • the drivers in some Linux distributions have been improved since the initial release
  • the Raspberry Pi can suffer from performance problems if peripherals are drawing too much power from the power supply; one of the consequences is errors from the SD card
  • unless using a preinstalled card, users have to copy a distribution image to the SD card. This might be considered more technical than the user has previously experienced, resulting in a faulty SD card
  • there are many cheap copies of brand name SD cards on the market, in addition they are often mislabelled as having greater capacity than they really have, see SanDisk counterfeit cards

... and of course, they may be faulty!

Technical Information

Note that manufacturers change their designs over time, even as the specs stay the same. (E.g. an ACME 8 GB class 4 card manufactured in 2011 might work, while one manufactured in 2012 might not.)

For this reason, please specify product numbers in the lists below, when possible.

You can also attach the following fields from your card's CID:

cd /sys/class/mmc_host/mmc?/mmc?:*
echo "man:$(cat manfid) oem:$(cat oemid) name:$(cat name) hwrev:$(cat hwrev) fwrev:$(cat fwrev)"

Working / Non-working SD cards

The table can be sorted using the triangles in the top row. Please add entries in the correct location, so that the initial sort is by Manufacturer, Type, Size and Class. Keep separate entries for working and non-working. Put your user name and date in the final column, so people can judge if the problem is still likely to occur.

Manufacturer Type Size Class Part Number Description Added
ok 7DAYSHOP.CzOM SDHC 8 10 man:0x000027 oem:0x5048 name:SD08G hwrev:0x3 fwrev:0x0 Ap 3 Jul 2012
nok Acumem SDHC 8 6 many errors on 7 Jun 2012 S0rce 8 Jun 2012
nok Adata SDHC 2 ? Speedy (MMAGF02GWMCA -NA) Oostenvr 4 Jul 2012
ok Adata SDHC 2 2 Speedy 8B0947 Stevhorn 14 Aug 2012
ok Adata SDHC 4 4 ASDH4GCL4-R Possibly a bit slow. Stiff to pull out of the PI. James.C 24 Apr 2013
ok Adata SDHC 4 4 BH1109416141G Blutme 17 Aug 2012
ok Adata SDHC 8 2 MMB3F08GWMCA-GE Timishier 10 Jun 2012
ok Adata SDHC 8 6 MMAGR08GUDCA-DB sometimes boots (Dattaway) Florz 26 May 2012, Dattaway 13 Jun 2012
ok Adata SDHC 8 10 AUSDH8GCL10-R, P-SDH8G10-EC, ASDH8GCL10-R Elatllat 22 Dec 2011, Madcow42 18 Jul 2012, Thenix 14 Jan 2013
ok Adata SDHC 16 6 man:0x00001d oem:0x4144 name:SD hwrev:0x1 fwrev:0x0 Semtex 21 May 2012, Jettis 5 Sep 2013
nok Adata SDHC 16 6 SD5MY168G0 won't boot Nijntje 18 May 2012
ok Adata SDHC 16 10 16GSDHC10, ASDH16GUICL10-R Captainralf 6 Jun 2012, honza801 7 Jan 2013, CopperHead4750 28 Jan 2014
ok Adata SDHC 32 10 AUSDH32GCL10-R Tom3f 13 Jul 2012
ok Adata microSDHC 8 4 MicroSD w/ adapter 0xAF 12 Jun 2012
nok AEGO microSDHC 16 10 MMAGR16GUDCA-T0 File system read error Randomeizer 22 Mar 2018
ok Adata microSDHC 8 10 AUSDH8GUICL10-RA1 MicroSD w/ adapter johnniepop 15 Apr 2013,(Elpadre 24/Nov/14)
ok Adata microSDHC 16 10 AUSDH16GCL10-RA1 with adapter Frank26080115 1 Jul 2012
ok Adata microSDHC 16 10 AUSDH16GUICL10-R Raspberry Pi B+ zl2wrw 1 Aug 2014
ok Adata microSDHC 16 10 AUSDH16GUICL10-RA1 man:0x00001d oem:0x4144 name:SD hwrev:0x0 fwrev:0x2 Raspberry Pi B+ 2014-12-24-wheezy-raspbian c 21 Jan 2015
nok Adata microSDHC 16 10 AUSDH16GUICL10-RA1 Raspberry Pi 2 B 2015-02-02-wheezy-raspbian c 13 Feb 2015
ok Adata microSDHC 16 10 AUSDH16GUICL10-RA1 Raspberry Pi 2 B 2015-01-30-wheezy-raspbian: note: OK after running update!! johnty 2 Mar 2015
ok Adata microSDHC 16 10 AUSDH16GUICL10-RA1 Raspberry Pi B 2015-01-30-wheezy-raspbian johnty 2 Mar 2015
ok Adata microSDHC 16 10 AUSDH16GUICL10-RA1 Raspberry Pi B+ 2015-01-30-wheezy-raspbian johnty 2 Mar 2015
ok Adata microSDHC 32 10 AUSDH32GCL10-RA1 2013-05-25-wheezy-raspbian pAIgn10 6 Jun 2013
nok Adata microSDHC 64 10 with adapter rolgiati 2 May 2013
nok Agfa microSDHC 16 6 with adapter ENAAJK121960 MaWe 13 Aug 2012
nok AmazonBasics SDHC 4 10 B004Q3R9AQ We have had a 50% failure rate on these with file system corruption, even with write protection enabled, with Raspian pgardella 27 June 2013
ok AmazonBasics SDHC 8 10 B0058GH0LS Reid 7 Jun 2012
ok AmazonBasics SDHC 16 10 B0058GH1IK Tested 24 Jun 2012 no errors found M3ch4 26 Jun 2012
nok AmazonBasics SDHC 16 10 many errors on 7 Jun 2012 S0rce 8 Jun 2012
ok AmazonBasics SDHC 32 10 Lrosengreen 16 Aug 2012
nok Ansonchina microSDHC 8 10 EVO Card from Aliexpress, doesn't boot, tested on RPi B rev 2.0 Astarta 2015-10-31
nok Ansonchina microSDHC 32 10 EVO Card from Aliexpress, Tested on RPi B+ Kimvais 2015-02-26
ok Apacer SDHC 8 6 Hamish 13 Aug 2012
nok Apacer SDHC 32 10 AP32GMCSH10U1-R NOOBS image will not extract on PI 2 (1G), but extracted ok on PI (512) version PaulK 6 Aug 2015
nok Apacer SDHC 16 10 AP16GSDHC10 Does not boot / io error from dmesg with os running from usb. Jettis 5 Sep 2013
ok Apacer microSDHC 8 10 with adapter Jasen 8 Jun 2012
ok blackweb microSDHC 16 10 EKSDM16GCGBW [man:0x00009f oem:0x5449 name:N/A hwrev:0x1 fwrev:0x0] Peppernrino 9 Mar 2020
ok Centon SDHC 4 10 4GBSDHC10 Dick Jones, 24 Sept 2013
ok Centon SDHC 16 4 1447 Uberfoo 23 Jul 2012
ok Centon MicroSDHC 32 10 Raspberry Pi 2 Model B Riverstyxxx 7 Feb 2015
ok CnMemory SDHC 8 4 84209_8GB_SDHC (Silver/Black label says 'High Capacity Card') Maplins operation is much slower than with a SanDisk 4GB Class 4 card Ceptimus 2 Jun 2012
ok CnMemory microSDHC 8 10 86071 man:0x00001b oem:0x534d name:00000 hwrev:0x1 fwrev:0x0. write 10.4 MB/s, read 20.1 MB/s fiodschi, 19 Jan 2013
ok CoreMicro microSDHC 8 4 CMMICROSDCL4/8GB man:0x000082 oem:0x4a54 name:NCard hwrev:0x1 fwrev:0x0 Dick Jones, 4 Dec 2013
nok Dane-Elec SDHC 4 4 DA-SD-4096-R Error -110 whilst initialising sd card captbrando, 04 Mar 2013
ok <