Difference between revisions of "RPi SD cards"

From eLinux.org
Jump to: navigation, search
(Working / Non-working SD cards)
Line 29: Line 29:
 
* [[RPi_Advanced_Setup | Advanced set up]]
 
* [[RPi_Advanced_Setup | Advanced set up]]
  
* [[R-Pi_Troubleshooting#SD_cards | Troubleshooting]]
+
* [[R-Pi_Troubleshooting#SD_cards | Troubleshooting]]== Preinstalled SD cards ==You might like to consider buying a preinstalled card; a wide range of branded SD cards preinstalled with operating systems are available. If you don't buy a preinstalled card, you will have to create one yourself. Check the [[RPi_Easy_SD_Card_Setup | SD Card setup]] page to help you make this decision. That page also shows where these cards can be bought from.==Verification==Users have listed working and non-working cards here. The [https://www.sdcard.org/home SD Card Association] suggests there are more than 400 brands across dozens of product categories and more than 8,000 models. These are just a few.=== Is this reliable? ===Unfortunately there is little scope for analysis of the failures given below. There are several reasons why a card may not work. You will notice that the same card may be shown as working and not working; the model numbers on cards do seem to be confusing.* the firmware / bootloader on early Raspberry Pi boards had a problem with Class 10 high speed cards. This has been fixed.* the drivers in some Linux distributions have been improved since the initial release* the Raspberry Pi can suffer from performance problems if peripherals are drawing too much power from the power supply; one of the consequences is errors from the SD card* unless using a preinstalled card, users have to copy a distribution image to the SD card. This might be considered more technical than the user has previously experienced, resulting in a faulty SD card* there are many cheap Chinese copies of (brand name) SD-Cards on the market, in addition they are often mislabelled as having greater capacity than they really have, see [http://www.petapixel.com/2011/05/20/one-third-of-the-sandisk-memory-cards-on-earth-are-counterfeit SanDisk counterfeit cards]... and of course, they may be faulty!=== Technical Information ===Note that manufacturers change their designs over time, even as the specs stay the same. (E.g. an ACME 8 GB class 4 card manufactured in 2011 might work, while one manufactured in 2012 might not.)For this reason, please specify product numbers in the lists below, when possible.You can also attach the following fields from your card's CID:<pre>cd /sys/class/mmc_host/mmc?/mmc?:*echo "man:$(cat manfid) oem:$(cat oemid) name:$(cat name) hwrev:$(cat hwrev) fwrev:$(cat fwrev)"</pre>=== Working / Non-working SD cards ===The table can be sorted using the triangles in the top row. Please add entries in the correct location, so that the initial sort is by Manufacturer, Type, Size and Class. Keep separate entries for working and non-working. Put your user name and date in the final column, so people can judge if the problem is still likely to occur.{| class="wikitable sortable"! OK !! Manufacturer  !! Type !! Size (GB) !! Class !! Model !! Info !! Logged by|-|style='background-color:#0a0;'| ok|7DAYSHOP.CzOM|SDHC|8|10||man:0x000027 oem:0x5048 name:SD08G hwrev:0x3 fwrev:0x0|Ap 3 Jul 2012|-|style='background-color:#c00;'| nok|Acumem|SDHC|8|6||many errors on 7 Jun 2012|S0rce 8 Jun 2012|-|style='background-color:#c00;'| nok|Adata|SDHC|2|?|Speedy (MMAGF02GWMCA -NA)||Oostenvr 4 Jul 2012|-|style='background-color:#0a0;'| ok|Adata|SDHC|2|2|Speedy 8B0947||Stevhorn 14 Aug 2012|-|style='background-color:#0a0;'| ok|Adata|SDHC|4|4|ASDH4GCL4-R|Possibly a bit slow.  Stiff to pull out of the PI.|James.C 24 Apr 2013|-|style='background-color:#0a0;'| ok|Adata|SDHC|4|4|BH1109416141G||Blutme 17 Aug 2012|-|style='background-color:#0a0;'| ok|Adata|SDHC|8|2|MMB3F08GWMCA-GE||Timishier 10 Jun 2012|-|style='background-color:#0a0;'| ok|Adata|SDHC|8|6|MMAGR08GUDCA-DB|sometimes boots (Dattaway)|Florz 26 May 2012, Dattaway 13 Jun 2012|-|style='background-color:#0a0;'| ok|Adata|SDHC|8|10|AUSDH8GCL10-R, P-SDH8G10-EC, ASDH8GCL10-R||Elatllat 22 Dec 2011, Madcow42 18 Jul 2012, Thenix 14 Jan 2013|-|style='background-color:#0a0;'| ok|Adata|SDHC|16|6||man:0x00001d oem:0x4144 name:SD hwrev:0x1 fwrev:0x0|Semtex 21 May 2012, Jettis 5 Sep 2013|-|style='background-color:#c00;'| nok|Adata|SDHC|16|6|SD5MY168G0|won't boot|Nijntje 18 May 2012|-|style='background-color:#0a0;'| ok|Adata|SDHC|16|10|16GSDHC10, ASDH16GUICL10-R||Captainralf 6 Jun 2012, honza801 7 Jan 2013, CopperHead4750 28 Jan 2014
 
 
== Preinstalled SD cards ==
 
 
 
You might like to consider buying a preinstalled card; a wide range of branded SD cards preinstalled with operating systems are available. If you don't buy a preinstalled card, you will have to create one yourself. Check the [[RPi_Easy_SD_Card_Setup | SD Card setup]] page to help you make this decision. That page also shows where these cards can be bought from.
 
 
 
==Verification==
 
 
 
Users have listed working and non-working cards here. The [https://www.sdcard.org/home SD Card Association] suggests there are more than 400 brands across dozens of product categories and more than 8,000 models. These are just a few.
 
 
 
=== Is this reliable? ===
 
 
 
Unfortunately there is little scope for analysis of the failures given below. There are several reasons why a card may not work. You will notice that the same card may be shown as working and not working; the model numbers on cards do seem to be confusing.
 
 
 
* the firmware / bootloader on early Raspberry Pi boards had a problem with Class 10 high speed cards. This has been fixed.
 
* the drivers in some Linux distributions have been improved since the initial release
 
* the Raspberry Pi can suffer from performance problems if peripherals are drawing too much power from the power supply; one of the consequences is errors from the SD card
 
* unless using a preinstalled card, users have to copy a distribution image to the SD card. This might be considered more technical than the user has previously experienced, resulting in a faulty SD card
 
* there are many cheap Chinese copies of (brand name) SD-Cards on the market, in addition they are often mislabelled as having greater capacity than they really have, see [http://www.petapixel.com/2011/05/20/one-third-of-the-sandisk-memory-cards-on-earth-are-counterfeit SanDisk counterfeit cards]
 
 
 
... and of course, they may be faulty!
 
 
 
=== Technical Information ===
 
 
 
Note that manufacturers change their designs over time, even as the specs stay the same. (E.g. an ACME 8 GB class 4 card manufactured in 2011 might work, while one manufactured in 2012 might not.)
 
 
 
For this reason, please specify product numbers in the lists below, when possible.
 
 
 
You can also attach the following fields from your card's CID:
 
<pre>
 
cd /sys/class/mmc_host/mmc?/mmc?:*
 
echo "man:$(cat manfid) oem:$(cat oemid) name:$(cat name) hwrev:$(cat hwrev) fwrev:$(cat fwrev)"
 
</pre>
 
 
 
=== Working / Non-working SD cards ===
 
 
 
The table can be sorted using the triangles in the top row. Please add entries in the correct location, so that the initial sort is by Manufacturer, Type, Size and Class. Keep separate entries for working and non-working. Put your user name and date in the final column, so people can judge if the problem is still likely to occur.
 
 
 
{| class="wikitable sortable"
 
! OK !! Manufacturer  !! Type !! Size (GB) !! Class !! Model !! Info !! Logged by
 
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|7DAYSHOP.CzOM
+
|Adata
 
|SDHC
 
|SDHC
|8
+
|32
 
|10
 
|10
 +
|AUSDH32GCL10-R
 
|
 
|
|man:0x000027 oem:0x5048 name:SD08G hwrev:0x3 fwrev:0x0
+
|Tom3f 13 Jul 2012
|Ap 3 Jul 2012
 
 
|-
 
|-
|style='background-color:#c00;'| nok
+
|style='background-color:#0a0;'| ok
|Acumem
+
|Adata
|SDHC
+
|microSDHC
 
|8
 
|8
|6
+
|4
 
|
 
|
|many errors on 7 Jun 2012
+
|MicroSD w/ adapter
|S0rce 8 Jun 2012
+
|0xAF 12 Jun 2012
 
|-
 
|-
|style='background-color:#c00;'| nok
+
|style='background-color:#0a0;'| ok
 
|Adata
 
|Adata
|SDHC
+
|microSDHC
|2
+
|8
|?
+
|10
|Speedy (MMAGF02GWMCA -NA)
 
 
|
 
|
|Oostenvr 4 Jul 2012
+
|MicroSD w/ adapter
 +
|johnniepop 15 Apr 2013
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
 
|Adata
 
|Adata
|SDHC
+
|microSDHC
|2
+
|16
|2
+
|10
|Speedy 8B0947
+
|AUSDH16GCL10-RA1
|
+
|with adapter
|Stevhorn 14 Aug 2012
+
|Frank26080115 1 Jul 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
 
|Adata
 
|Adata
|SDHC
+
|microSDHC
|4
+
|32
|4
+
|10
|ASDH4GCL4-R
+
|AUSDH32GCL10-RA1
|Possibly a bit slow.  Stiff to pull out of the PI.
+
|2013-05-25-wheezy-raspbian
|James.C 24 Apr 2013
+
|pAIgn10 6 Jun 2013
 
|-
 
|-
|style='background-color:#0a0;'| ok
+
|style='background-color:#c00;'| nok
 
|Adata
 
|Adata
|SDHC
+
|microSDHC
|4
+
|64
|4
+
|10
|BH1109416141G
 
 
|
 
|
|Blutme 17 Aug 2012
+
|with adapter
 +
|rolgiati 2 May 2013
 
|-
 
|-
|style='background-color:#0a0;'| ok
+
|style='background-color:#c00;'| nok
|Adata
+
|Agfa
|SDHC
+
|microSDHC
|8
+
|16
|2
+
|6
|MMB3F08GWMCA-GE
 
 
|
 
|
|Timishier 10 Jun 2012
+
|with adapter ENAAJK121960
 +
|MaWe 13 Aug 2012
 
|-
 
|-
|style='background-color:#0a0;'| ok
+
|style='background-color:#c00;'| nok
|Adata
+
|AmazonBasics
 
|SDHC
 
|SDHC
|8
+
|4
|6
+
|10
|MMAGR08GUDCA-DB
+
|B004Q3R9AQ
|sometimes boots (Dattaway)
+
|We have had a 50% failure rate on these with file system corruption, even with write protection enabled, with Raspian
|Florz 26 May 2012, Dattaway 13 Jun 2012
+
|pgardella 27 June 2013
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Adata
+
|AmazonBasics
 
|SDHC
 
|SDHC
 
|8
 
|8
 
|10
 
|10
|AUSDH8GCL10-R, P-SDH8G10-EC, ASDH8GCL10-R
+
|B0058GH0LS
 
|
 
|
|Elatllat 22 Dec 2011, Madcow42 18 Jul 2012, Thenix 14 Jan 2013
+
|Reid 7 Jun 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Adata
+
|AmazonBasics
 
|SDHC
 
|SDHC
 
|16
 
|16
|6
+
|10
|
+
|B0058GH1IK
|man:0x00001d oem:0x4144 name:SD hwrev:0x1 fwrev:0x0
+
|Tested 24 Jun 2012 no errors found
|Semtex 21 May 2012, Jettis 5 Sep 2013
+
|M3ch4 26 Jun 2012
 
|-
 
|-
 
|style='background-color:#c00;'| nok
 
|style='background-color:#c00;'| nok
|Adata
+
|AmazonBasics
 
|SDHC
 
|SDHC
 
|16
 
|16
|6
+
|10
|SD5MY168G0
+
|
|won't boot
+
|many errors on 7 Jun 2012
|Nijntje 18 May 2012
+
|S0rce 8 Jun 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Adata
+
|AmazonBasics
 
|SDHC
 
|SDHC
|16
+
|32
 
|10
 
|10
|16GSDHC10, ASDH16GUICL10-R
 
 
|
 
|
|Captainralf 6 Jun 2012, honza801 7 Jan 2013, CopperHead4750 28 Jan 2014
+
|
 +
|Lrosengreen 16 Aug 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Adata
+
|Apacer
 +
|SDHC
 +
|8
 +
|6
 +
|
 +
|
 +
|Hamish 13 Aug 2012
 +
|-
 +
|style='background-color:#c00;'| nok
 +
|Apacer
 
|SDHC
 
|SDHC
|32
+
|16
 
|10
 
|10
|AUSDH32GCL10-R
+
|AP16GSDHC10
|
+
|Does not boot / io error from dmesg with os running from usb.
|Tom3f 13 Jul 2012
+
|Jettis 5 Sep 2013
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Adata
+
|Apacer
 
|microSDHC
 
|microSDHC
 
|8
 
|8
|4
+
|10
 
|
 
|
|MicroSD w/ adapter
+
|with adapter
|0xAF 12 Jun 2012
+
|Jasen 8 Jun 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Adata
+
|Centon
|microSDHC
+
|SDHC
|8
+
|4
 
|10
 
|10
 +
|4GBSDHC10
 
|
 
|
|MicroSD w/ adapter
+
|Dick Jones, 24 Sept 2013
|johnniepop 15 Apr 2013
 
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Adata
+
|Centon
|microSDHC
+
|SDHC
 
|16
 
|16
|10
+
|4
|AUSDH16GCL10-RA1
+
|1447
|with adapter
+
|
|Frank26080115 1 Jul 2012
+
|Uberfoo 23 Jul 2012
 +
|-
 +
|style='background-color:#0a0;'| ok
 +
|CnMemory
 +
|SDHC
 +
|8
 +
|4
 +
|84209_8GB_SDHC (Silver/Black label says 'High Capacity Card') Maplins
 +
|operation is much slower than with a SanDisk 4GB Class 4 card
 +
|Ceptimus 2 Jun 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Adata
+
|CnMemory
 
|microSDHC
 
|microSDHC
|32
+
|8
 
|10
 
|10
|AUSDH32GCL10-RA1
+
|86071
|2013-05-25-wheezy-raspbian
+
|man:0x00001b oem:0x534d name:00000 hwrev:0x1 fwrev:0x0. write 10.4 MB/s, read 20.1 MB/s
|pAIgn10 6 Jun 2013
+
|fiodschi, 19 Jan 2013
 
|-
 
|-
|style='background-color:#c00;'| nok
+
|style='background-color:#0a0;'| ok
|Adata
+
|CoreMicro
 
|microSDHC
 
|microSDHC
|64
+
|8
|10
+
|4
|
+
|CMMICROSDCL4/8GB
|with adapter
+
|man:0x000082 oem:0x4a54 name:NCard hwrev:0x1 fwrev:0x0
|rolgiati 2 May 2013
+
|Dick Jones, 4 Dec 2013
 
|-
 
|-
 
|style='background-color:#c00;'| nok
 
|style='background-color:#c00;'| nok
|Agfa
+
|Dane-Elec
|microSDHC
 
|16
 
|6
 
|
 
|with adapter ENAAJK121960
 
|MaWe 13 Aug 2012
 
|-
 
|style='background-color:#c00;'| nok
 
|AmazonBasics
 
 
|SDHC
 
|SDHC
 
|4
 
|4
|10
+
|4
|B004Q3R9AQ
+
|DA-SD-4096-R
|We have had a 50% failure rate on these with file system corruption, even with write protection enabled, with Raspian
+
|Error -110 whilst initialising sd card
|pgardella 27 June 2013
+
|captbrando, 04 Mar 2013
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|AmazonBasics
+
|Dane-Elec
 
|SDHC
 
|SDHC
|8
+
|16
|10
+
|4
|B0058GH0LS
+
|
 
|
 
|
|Reid 7 Jun 2012
+
|Elatllat 22 Dec 2011
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|AmazonBasics
+
|Dane-Elec
 
|SDHC
 
|SDHC
 
|16
 
|16
 
|10
 
|10
|B0058GH1IK
+
|Pro 200X DEMS16GB2683ENBA
|Tested 24 Jun 2012 no errors found
+
|
|M3ch4 26 Jun 2012
+
|Ivazquez 15 Aug 2012
 
|-
 
|-
 
|style='background-color:#c00;'| nok
 
|style='background-color:#c00;'| nok
|AmazonBasics
+
|Delkin
 
|SDHC
 
|SDHC
|16
+
|4
|10
+
|6
|
+
|Delkin pro
|many errors on 7 Jun 2012
+
|works with Fedora Beefy Miracle 17
|S0rce 8 Jun 2012
+
|Gersh 7 Jun 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|AmazonBasics
+
|Dick Smith
 
|SDHC
 
|SDHC
|32
+
|4
|10
+
|4
 +
|XG4958
 
|
 
|
|
+
|James.C 14 Apr 2013
|Lrosengreen 16 Aug 2012
 
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Apacer
+
|Dick Smith
 
|SDHC
 
|SDHC
 
|8
 
|8
|6
+
|4
|
+
|XG4959
|
+
|This 8GB DSE SD (S608G1137) works fine on latest Raspbian as at Dec 2013
|Hamish 13 Aug 2012
+
|Sauce 3 Dec 2013
 
|-
 
|-
|style='background-color:#c00;'| nok
+
|style='background-color:#0a0;'| ok
|Apacer
+
|Dikom
 
|SDHC
 
|SDHC
 
|16
 
|16
 
|10
 
|10
|AP16GSDHC10
+
|207H3MD016IBSD
|Does not boot / io error from dmesg with os running from usb.
 
|Jettis 5 Sep 2013
 
|-
 
|style='background-color:#0a0;'| ok
 
|Apacer
 
|microSDHC
 
|8
 
|10
 
 
|
 
|
|with adapter
+
|Churchill 1 Jun 2012
|Jasen 8 Jun 2012
 
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Centon
+
|Duracell
 
|SDHC
 
|SDHC
 
|4
 
|4
|10
+
|4
|4GBSDHC10
+
|
 
|
 
|
|Dick Jones, 24 Sept 2013
+
|Semtex 21 May 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Centon
+
|Duracell
 
|SDHC
 
|SDHC
 
|16
 
|16
|4
+
|10
|1447
+
|Pro Photo 200x
 
|
 
|
|Uberfoo 23 Jul 2012
+
|Semtex 21 May 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|CnMemory
+
|Duracell
 
|SDHC
 
|SDHC
|8
+
|32
|4
+
|10
|84209_8GB_SDHC (Silver/Black label says 'High Capacity Card') Maplins
+
|
|operation is much slower than with a SanDisk 4GB Class 4 card
+
|man:0x00001d oem:0x4144 name:SD    hwrev:0x1 fwrev:0x0 (~4.6MB/s read, ~4.4MB/s write on debian6-19-04-2012)
|Ceptimus 2 Jun 2012
+
|Bedevere 5 Jul 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|CnMemory
+
|Emtec
|microSDHC
+
|SD
|8
+
|2
|10
+
|?
|86071
+
|
|man:0x00001b oem:0x534d name:00000 hwrev:0x1 fwrev:0x0. write 10.4 MB/s, read 20.1 MB/s
+
|man:0x000027 oem:0x5048 name:SD02G hwrev:0x2 fwrev:0x0
|fiodschi, 19 Jan 2013
+
|Incyi 7 Jul 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|CoreMicro
+
|Emtec
|microSDHC
+
|SDHC
|8
+
|4
 
|4
 
|4
|CMMICROSDCL4/8GB
+
|EKMSD4G60XHCN
|man:0x000082 oem:0x4a54 name:NCard hwrev:0x1 fwrev:0x0
+
|
|Dick Jones, 4 Dec 2013
+
|Korban 18 Aug 2012
 +
|-
 +
|style='background-color:#0a0;'| ok
 +
|Emtec
 +
|SDHC
 +
|8
 +
|10
 +
|EKMSD8G150XHC
 +
|~17 MB/s read / ~14 MB/s write in 'dd' (man:0x000003 oem:0x5344 name:SMI  hwrev:0x1 fwrev:0x0)
 +
|NC 10 Feb 2013
 
|-
 
|-
 
|style='background-color:#c00;'| nok
 
|style='background-color:#c00;'| nok
|Dane-Elec
+
|Emtec
 
|SDHC
 
|SDHC
|4
+
|8
|4
+
|10
|DA-SD-4096-R
+
|EKMSD8G150XHC
|Error -110 whilst initialising sd card
+
|Both Raspmc and OpenElec tries to boot, but throws lots of errors
|captbrando, 04 Mar 2013
+
|vygandas 12 June 2013
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Dane-Elec
+
|Emtec
|SDHC
+
|SD
 
|16
 
|16
|4
+
|10
|
+
|EKMSD16G150XHC
|
+
|less than half as fast as Sandisk 16gb Class 10
|Elatllat 22 Dec 2011
+
|Declension 8 Aug 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Dane-Elec
+
|Extrememory
 
|SDHC
 
|SDHC
 
|16
 
|16
 
|10
 
|10
|Pro 200X DEMS16GB2683ENBA
 
 
|
 
|
|Ivazquez 15 Aug 2012
+
|man:0x000012 oem:0x3456 name:F0F0F hwrev:0x1 fwrev:0x0
 +
|Fjen 10 May 2012
 
|-
 
|-
 
|style='background-color:#c00;'| nok
 
|style='background-color:#c00;'| nok
|Delkin
+
|Extrememory
 
|SDHC
 
|SDHC
|4
+
|32
|6
+
|10
|Delkin pro
+
|Marked "Hyperformance"
|works with Fedora Beefy Miracle 17
+
|
|Gersh 7 Jun 2012
+
|MathieuMD 29 Oct 2013
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Dick Smith
+
|Extrememory
 
|SDHC
 
|SDHC
|4
+
|32
|4
+
|10
|XG4958
 
 
|
 
|
|James.C 14 Apr 2013
+
|man:0x000003 oem:0x5344 name:SMI  hwrev:0x1 fwrev:0x0
 +
|Mfg 3 Jun 2012
 +
|-
 +
|style='background-color:#0a0;'| ok
 +
|Fuji
 +
|SDHC
 +
|32
 +
|10
 +
|P10NM00580A
 +
|(man:0x000073 oem:0x4247 name:NCard hwrev:0x1 fwrev:0x0)
 +
|Crashmeplease 28 Jul 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Dick Smith
+
|Fujifilm
 
|SDHC
 
|SDHC
 
|8
 
|8
 
|4
 
|4
|XG4959
+
|P10N079840A
|This 8GB DSE SD (S608G1137) works fine on latest Raspbian as at Dec 2013
+
|
|Sauce 3 Dec 2013
+
|Paul 26 Aug 2013
 +
|-
 +
|style='background-color:#c00;'| nok
 +
|GSkill
 +
|SDHC
 +
|32
 +
|10
 +
|
 +
|
 +
|Flatline403 12 May 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Dikom
+
|GSkill
 
|SDHC
 
|SDHC
 
|16
 
|16
 
|10
 
|10
|207H3MD016IBSD
+
|FF-TSDG16GA-C10
 
|
 
|
|Churchill 1 Jun 2012
+
|GKontadakis & Jim Kastrinakis (the toxic duet of IT) 31 Aug 2013
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Duracell
+
|Goodram
|SDHC
+
|microSDHC
|4
+
|8
 
|4
 
|4
 
|
 
|
 
|
 
|
|Semtex 21 May 2012
+
|Chmurli 9 Jun 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Duracell
+
|Goodram
|SDHC
+
|microSDHC
 
|16
 
|16
|10
+
|4
|Pro Photo 200x
+
|SDU16GHCAGRR10
 
|
 
|
|Semtex 21 May 2012
+
|Mojca 22 Jun 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Duracell
+
|Goodram
|SDHC
+
|microSDHC
|32
+
|16
 
|10
 
|10
 
|
 
|
|man:0x00001d oem:0x4144 name:SD    hwrev:0x1 fwrev:0x0 (~4.6MB/s read, ~4.4MB/s write on debian6-19-04-2012)
+
|
|Bedevere 5 Jul 2012
+
|Druss 5 Aug 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Emtec
+
|Hama
|SD
+
|SDHC
 +
|2
 
|2
 
|2
|?
 
 
|
 
|
|man:0x000027 oem:0x5048 name:SD02G hwrev:0x2 fwrev:0x0
+
|
|Incyi 7 Jul 2012
+
|Mikerr 5 Jul 2012
 +
|-
 +
|style='background-color:#0a0;'| ok
 +
|Hama
 +
|SDHC
 +
|8
 +
|6
 +
|High Speed Pro
 +
|
 +
|Bubblebobble 17 May 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Emtec
+
|Hema (Dutch dept. store)
 
|SDHC
 
|SDHC
 
|4
 
|4
|4
+
|?
|EKMSD4G60XHCN
+
|
 
|
 
|
|Korban 18 Aug 2012
+
|Frankivo 25 Jun 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Emtec
+
|Hema (Dutch dept. store)
 
|SDHC
 
|SDHC
 
|8
 
|8
|10
+
|4
|EKMSD8G150XHC
+
|
|~17 MB/s read / ~14 MB/s write in 'dd' (man:0x000003 oem:0x5344 name:SMI  hwrev:0x1 fwrev:0x0)
+
|
|NC 10 Feb 2013
+
|Hjongste 12 Jun 2012
 
|-
 
|-
|style='background-color:#c00;'| nok
+
|style='background-color:#0a0;'| ok
|Emtec
+
|HIDISC
 
|SDHC
 
|SDHC
 
|8
 
|8
 
|10
 
|10
|EKMSD8G150XHC
+
|HDPSDH8GC10
|Both Raspmc and OpenElec tries to boot, but throws lots of errors
+
|man:0x000027 oem:0x5048 name:SD08G hwrev:0x3 fwrev:0x0
|vygandas 12 June 2013
+
|Nkt00125 06 Aug 2013
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Emtec
+
|HP
|SD
+
|SDHC
|16
+
|8
|10
+
|4
|EKMSD16G150XHC
+
|
|less than half as fast as Sandisk 16gb Class 10
+
|doesn't reboot during first time startup process, but restart again and fine after that
|Declension 8 Aug 2012
+
|Semtex 21 May 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Extrememory
+
|HP
 
|SDHC
 
|SDHC
|16
+
|32
 
|10
 
|10
 
|
 
|
|man:0x000012 oem:0x3456 name:F0F0F hwrev:0x1 fwrev:0x0
+
|
|Fjen 10 May 2012
+
|Harkin 28 Jun 2012
 
|-
 
|-
|style='background-color:#c00;'| nok
+
|style='background-color:#0a0;'| ok
|Extrememory
+
|ICIDU
 
|SDHC
 
|SDHC
|32
+
|4
 
|10
 
|10
|Marked "Hyperformance"
 
 
|
 
|
|MathieuMD 29 Oct 2013
+
|
 +
|CurlyMo 1 Aug 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Extrememory
+
|ICIDU
|SDHC
+
|microSDHC
|32
+
|8
 
|10
 
|10
 
|
 
|
|man:0x000003 oem:0x5344 name:SMI  hwrev:0x1 fwrev:0x0
+
|
|Mfg 3 Jun 2012
+
|Wieltje 13 Jun 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Fuji
+
|ICIDU
 
|SDHC
 
|SDHC
|32
+
|16
 
|10
 
|10
|P10NM00580A
+
|
|(man:0x000073 oem:0x4247 name:NCard hwrev:0x1 fwrev:0x0)
+
|image write had issues, might be my inexperience. It boots & shows Xserver
|Crashmeplease 28 Jul 2012
+
|BjornW 26 May 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Fujifilm
+
|ICIDU
|SDHC
+
|microSDHC
|8
+
|16
|4
+
|10
|P10N079840A
+
|
 +
|(20 MB/sec)
 +
|Alphons 2 Aug 2012
 +
|-
 +
|style='background-color:#0a0;'| ok
 +
|ICIDU
 +
|microSDHC
 +
|32
 +
|10
 
|
 
|
|Paul 26 Aug 2013
+
|(20 MB/sec)
 +
|Alphons 2 Aug 2012
 
|-
 
|-
 
|style='background-color:#c00;'| nok
 
|style='background-color:#c00;'| nok
|GSkill
+
|Imation
 
|SDHC
 
|SDHC
 
|32
 
|32
 
|10
 
|10
|
+
|S732G1232
|
+
|mmc0: controller never released inhibit bit(s)
|Flatline403 12 May 2012
+
followed by many and various
 +
mmc0: timeout errors
 +
|ChrisGreen 28 Jan 2013
 
|-
 
|-
|style='background-color:#0a0;'| ok
+
|style='background-color:#c00;'| nok
|GSkill
+
|Integral
 
|SDHC
 
|SDHC
|16
+
|8
 
|10
 
|10
|FF-TSDG16GA-C10
+
|Ultima Pro 20MB/s SD-K08G - 1245-WJ1479L
|
+
|Gets too hot and wont boot.
|GKontadakis & Jim Kastrinakis (the toxic duet of IT) 31 Aug 2013
+
|mpmc 22 May 2013
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Goodram
+
|Integral
|microSDHC
+
|SDHC
 
|8
 
|8
 +
|10
 +
|Ultima Pro 20MB/s SD-K08G - 1238-W19718L
 +
|Works fine.
 +
|mpmc 22 May 2013
 +
|-
 +
|style='background-color:#0a0;'| ok
 +
|Integral
 +
|SDHC
 
|4
 
|4
 +
|4
 +
|SD-K04G (purple label), SD-M04G
 
|
 
|
|
+
|Dmd 27 Aug 2012
|Chmurli 9 Jun 2012
 
 
|-
 
|-
|style='background-color:#0a0;'| ok
+
|style='background-color:#c00;'| nok
|Goodram
+
|Integral
|microSDHC
+
|SDHC
|16
+
|4
 
|4
 
|4
|SDU16GHCAGRR10
+
|S404G1115
 
|
 
|
|Mojca 22 Jun 2012
+
|Pluggster 16 May 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Goodram
+
|Integral
|microSDHC
+
|SDHC
|16
+
|4
 
|10
 
|10
 +
|Ultima Pro
 
|
 
|
|
+
|Ace 26 May 2012
|Druss 5 Aug 2012
 
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Hama
+
|Integral
 
|SDHC
 
|SDHC
|2
+
|8
|2
+
|6
|
+
|Ultima Pro
|
+
|initial error -110 but boots within 5 seconds with no further errors or issues
|Mikerr 5 Jul 2012
+
|Bubblebobble 17 May 2012mmc0: controller never released inhibit bit(s) and
 +
 
 +
mmc0: timeout
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Hama
+
|Integral
 
|SDHC
 
|SDHC
 
|8
 
|8
|6
+
|10
|High Speed Pro
+
|Ultima Pro (20 MB/s)
|
+
|works: initial error -110 but boots within 5 seconds with no further errors or issues
|Bubblebobble 17 May 2012
+
|Auldy 10 Jun 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Hema (Dutch dept. store)
+
|Integral
 
|SDHC
 
|SDHC
|4
+
|16
|?
+
|6
 +
|Ultima Pro
 
|
 
|
|
+
|Zagblorg 26 Jul 2012
|Frankivo 25 Jun 2012
 
 
|-
 
|-
|style='background-color:#0a0;'| ok
+
|style='background-color:#c00;'| nok
|Hema (Dutch dept. store)
+
|Integral
 
|SDHC
 
|SDHC
|8
+
|16
|4
+
|6
 +
|Ultima Pro (SH016GAA2BB)
 
|
 
|
|
+
|Jmg123 23 Apr 2012
|Hjongste 12 Jun 2012
 
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|HIDISC
+
|Integral
 
|SDHC
 
|SDHC
|8
+
|16
 
|10
 
|10
|HDPSDH8GC10
+
|Ultima Pro
|man:0x000027 oem:0x5048 name:SD08G hwrev:0x3 fwrev:0x0
+
|20 MB/s
|Nkt00125 06 Aug 2013
+
|Tomgco 17 Apr 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|HP
+
|Integral
 
|SDHC
 
|SDHC
|8
+
|32
|4
+
|10
 +
|
 
|
 
|
|doesn't reboot during first time startup process, but restart again and fine after that
+
|FLX 2 Jul 2012
|Semtex 21 May 2012
 
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|HP
+
|Integral
 
|SDHC
 
|SDHC
 
|32
 
|32
 
|10
 
|10
 +
|Ultima Pro (20 MB/s)
 
|
 
|
|
+
|Ab30021190 30 Aug 2012
|Harkin 28 Jun 2012
 
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|ICIDU
+
|Integral
|SDHC
+
|microSDHC
|4
+
|8
|10
+
|4
 
|
 
|
|
+
|Tested with Raspbian 2013-12-20, with the included microSD adapter.
|CurlyMo 1 Aug 2012
+
|Plof 1 January 2014
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|ICIDU
+
|(Intenso)
|microSDHC
+
|SDHC
|8
+
|16
|10
+
|4
 
|
 
|
 
|
 
|
|Wieltje 13 Jun 2012
+
|johnniepop 15 Apr 2013
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|ICIDU
+
|(Intenso)
 
|SDHC
 
|SDHC
 
|16
 
|16
 
|10
 
|10
 
|
 
|
|image write had issues, might be my inexperience. It boots & shows Xserver
+
|man:0x000082 oem:0x4a54 name:NCard hwrev:0x0 fwrev:0x2 OpenELEC 3.10.20 write 8.0MB/s read 10.6MB/s
|BjornW 26 May 2012
+
|Cosbug 28 Dec 2013
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|ICIDU
+
|Joyflash
|microSDHC
+
|SDHC
 
|16
 
|16
 
|10
 
|10
 +
|LTSD1112016GB
 
|
 
|
|(20 MB/sec)
+
|Vk2amv 8 Jun 2012
|Alphons 2 Aug 2012
 
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|ICIDU
+
|Kingmax
|microSDHC
+
|SDHC
|32
+
|4
|10
+
|2
 +
|
 
|
 
|
|(20 MB/sec)
+
|Sorinm 17 May 2012
|Alphons 2 Aug 2012
 
 
|-
 
|-
 
|style='background-color:#c00;'| nok
 
|style='background-color:#c00;'| nok
|Imation
+
|Kingmax
|SDHC
+
|microSDHC
|32
+
|4
|10
+
|4
|S732G1232
+
|KM04GMCSDHC4
|mmc0: controller never released inhibit bit(s)
+
|won`t reboot when it`s hot
followed by many and various
+
|Sorinm 17 May 2012
mmc0: timeout errors
 
|ChrisGreen 28 Jan 2013
 
 
|-
 
|-
 
|style='background-color:#c00;'| nok
 
|style='background-color:#c00;'| nok
|Integral
+
|Kingmax
|SDHC
+
|microSDHC
 
|8
 
|8
|10
+
|4
|Ultima Pro 20MB/s SD-K08G - 1245-WJ1479L
+
|KM08GMCSDHC41A
|Gets too hot and wont boot.
+
|won't reboot when it's hot
|mpmc 22 May 2013
+
|Slabua 2 Aug 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Integral
+
|Kingston
|SDHC
+
|SD
|8
+
|2
|10
+
|
|Ultima Pro 20MB/s SD-K08G - 1238-W19718L
+
|KING-SD-M02G-BULK
|Works fine.
+
|(0xAF 12 Jun 2012) boots the kernel, but damages the filesystem
|mpmc 22 May 2013
+
|Md84419 5 Nov 2011, 0xAF 12 Jun 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Integral
+
|Kingston
 
|SDHC
 
|SDHC
 
|4
 
|4
 
|4
 
|4
|SD-K04G (purple label), SD-M04G
+
|SD4/4GB
 
|
 
|
|Dmd 27 Aug 2012
+
|Rew 18 Apr 2012
 
|-
 
|-
|style='background-color:#c00;'| nok
+
|style='background-color:#0a0;'| ok
|Integral
+
|Kingston
 
|SDHC
 
|SDHC
 
|4
 
|4
 
|4
 
|4
|S404G1115
+
|SD4/4GB SD-K04G
 
|
 
|
|Pluggster 16 May 2012
+
|James.C 20 Apr 2013
 
|-
 
|-
|style='background-color:#0a0;'| ok
+
|style='background-color:#c00;'| nok
|Integral
+
|Kingston
 
|SDHC
 
|SDHC
 
|4
 
|4
|10
+
|4
|Ultima Pro
+
|SD4/4GB SD-K04G
|
+
|(man:0x000003 oem:0x5344 name:SD16G hwrev:0x8 fwrev:0x0), boots, (mmc0: timeout waiting for hardware interrupt, followed by continuous I/O errors, timeouts, etc), 2013-02-09-wheezy-raspbian
|Ace 26 May 2012
+
|Bernard Ladenthin 12 Mar 2013
 
|-
 
|-
|style='background-color:#0a0;'| ok
+
|style='background-color:#c00;'| nok
|Integral
+
|Kingston
 
|SDHC
 
|SDHC
|8
+
|4
 
|6
 
|6
|Ultima Pro
+
|
|initial error -110 but boots within 5 seconds with no further errors or issues
+
|Boots kernel but won't run init (times out). (works fine - Malvineous)
|Bubblebobble 17 May 2012mmc0: controller never released inhibit bit(s) and
+
|RoSha 10 May 2012, Malvineous 17 Jun 2012
 
 
mmc0: timeout
 
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Integral
+
|Kingston
 
|SDHC
 
|SDHC
|8
+
|4
 
|10
 
|10
|Ultima Pro (20 MB/s)
+
|SD10V/4GB
|works: initial error -110 but boots within 5 seconds with no further errors or issues
+
|
|Auldy 10 Jun 2012
+
|Luismreis 2 Oct 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Integral
+
|Kingston
 
|SDHC
 
|SDHC
|16
+
|8
|6
+
|4
|Ultima Pro
+
|SD4/8GB
|
+
|Works reliably with Raspbian 18-9-2012 and previous Debian releases (Picards)
|Zagblorg 26 Jul 2012
+
|Md84419 5 Nov 2011, Picards 28 Oct 2012
 
|-
 
|-
 
|style='background-color:#c00;'| nok
 
|style='background-color:#c00;'| nok
|Integral
+
|Kingston
 
|SDHC
 
|SDHC
|16
+
|8
|6
+
|4
|Ultima Pro (SH016GAA2BB)
+
|SD4/8GB
|
+
|does not work with current build of raspbmc (LastSilmaril), unreliable with raspbian (Quentinsf)
|Jmg123 23 Apr 2012
+
|LastSilmaril 24 May 2012, Quentinsf 20 Oct 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Integral
+
|Kingston
 
|SDHC
 
|SDHC
|16
+
|8
|10
+
|6
|Ultima Pro
+
|SD6/8GB
|20 MB/s
+
|errors on boot, but ok (Debian), does not work with raspbmc rc2 or archlinux
|Tomgco 17 Apr 2012
+
|Jamsta 5 Jun 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Integral
+
|Kingston
 
|SDHC
 
|SDHC
|32
+
|8
 
|10
 
|10
 +
|SD10G2/8GB ultimateX 100X, SD10V/8GB ultimateX 120X
 
|
 
|
|
+
|ShiftPlusOne 24 Apr 2012, Stevepdp 13 May 2012
|FLX 2 Jul 2012
 
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Integral
+
|Kingston
 
|SDHC
 
|SDHC
|32
+
|8
 
|10
 
|10
|Ultima Pro (20 MB/s)
+
|SD10G3/8GB Elite
|
+
|Works with Raspbian Wheezy 25/05/2013
|Ab30021190 30 Aug 2012
+
|Deicide 17 July 2013
 
|-
 
|-
|style='background-color:#0a0;'| ok
+
|style='background-color:#c00;'| nok
|Integral
+
|Kingston
|microSDHC
+
|SDHC
 
|8
 
|8
|4
+
|10
|
+
|SD10V/8GB
|Tested with Raspbian 2013-12-20, with the included microSD adapter.
+
|Stevhorn: Very slow writing images to card and then either won't boot, or boots very slowly.<br />2rB: Card seems fine while in computer. In pi, only able to read the boot partition. OS will not boot.
|Plof 1 January 2014
+
|Stevhorn 14 Aug 2012.<br />2rB 31 Dec 2013.
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|(Intenso)
+
|Kingston
 
|SDHC
 
|SDHC
 
|16
 
|16
 
|4
 
|4
 +
|SD4/16GB
 
|
 
|
|
+
|Skiesare 27 May 2012
|johnniepop 15 Apr 2013
 
 
|-
 
|-
|style='background-color:#0a0;'| ok
+
|style='background-color:#c00;'| nok
|(Intenso)
+
|Kingston
 
|SDHC
 
|SDHC
 
|16
 
|16
|10
+
|4
|
+
|SDC4/16GB17
|man:0x000082 oem:0x4a54 name:NCard hwrev:0x0 fwrev:0x2 OpenELEC 3.10.20 write 8.0MB/s read 10.6MB/s
+
|Device does not recognize it
|Cosbug 28 Dec 2013
+
|Martink 24 Jul 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Joyflash
+
|Kingston
 
|SDHC
 
|SDHC
 
|16
 
|16
|10
+
|6
|LTSD1112016GB
+
|SD6/16GB
 
|
 
|
|Vk2amv 8 Jun 2012
+
|Malvineous 17 Jun 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Kingmax
+
|Kingston
 
|SDHC
 
|SDHC
|4
+
|16
|2
+
|10
 +
|SD10G2/16GB ultimateX 100X, SD4/16GBET
 
|
 
|
|
+
|Stevepdp 13 May 2012
|Sorinm 17 May 2012
 
 
|-
 
|-
 
|style='background-color:#c00;'| nok
 
|style='background-color:#c00;'| nok
|Kingmax
+
|Kingston
|microSDHC
+
|SDHC
|4
+
|16
|4
+
|10
|KM04GMCSDHC4
+
|SD10G2/16GB ultimateX 100X
|won`t reboot when it`s hot
+
|mmc0: Timeout waiting for hardware interrupt
|Sorinm 17 May 2012
+
|Kimmoli 27 Jan 2013
 
|-
 
|-
 
|style='background-color:#c00;'| nok
 
|style='background-color:#c00;'| nok
|Kingmax
 
|microSDHC
 
|8
 
|4
 
|KM08GMCSDHC41A
 
|won't reboot when it's hot
 
|Slabua 2 Aug 2012
 
|-
 
|style='background-color:#0a0;'| ok
 
 
|Kingston
 
|Kingston
|SD
+
|SDHC
|2
+
|16
|
+
|10
|KING-SD-M02G-BULK
+
|SD10V/16GB
|(0xAF 12 Jun 2012) boots the kernel, but damages the filesystem
+
|Starts boot ok but then gets stuck in mmc0 timeouts
|Md84419 5 Nov 2011, 0xAF 12 Jun 2012
+
|Hh 14 Nov 2012
 
|-
 
|-
|style='background-color:#0a0;'| ok
+
|style='background-color:#c00;'| nok
 
|Kingston
 
|Kingston
 
|SDHC
 
|SDHC
|4
+
|16
|4
+
|10
|SD4/4GB
+
|SD10V/16GB <br/>(N0440-001. A00LF TAIWAN  JM94513-908.A00LF)
|
+
|mmc0 timeouts
|Rew 18 Apr 2012
+
|Epa 20130304
 
|-
 
|-
|style='background-color:#0a0;'| ok
+
|style='background-color:#c00;'| nok
 
|Kingston
 
|Kingston
 
|SDHC
 
|SDHC
|4
+
|16
|4
+
|10
|SD4/4GB SD-K04G
+
|SD10V/16GB <br/>(N0440-002. A00LF TAIWAN  JM94585-902.A00LF)
|
+
|not booting. no hdmi output. red leds on solid, green leds very lightly dimmed, no green flash/blink
|James.C 20 Apr 2013
+
|smerz 20131230
 
|-
 
|-
|style='background-color:#c00;'| nok
+
|style='background-color:#0a0;'| ok
 
|Kingston
 
|Kingston
 
|SDHC
 
|SDHC
|4
+
|16
|4
+
|10
|SD4/4GB SD-K04G
+
|SD10V/16GB <br/>(N0372-002. A00LF TAIWAN  JM94450-901.A00LF)
|(man:0x000003 oem:0x5344 name:SD16G hwrev:0x8 fwrev:0x0), boots, (mmc0: timeout waiting for hardware interrupt, followed by continuous I/O errors, timeouts, etc), 2013-02-09-wheezy-raspbian
+
|Seems to work
|Bernard Ladenthin 12 Mar 2013
+
|Epa 20130403
 
|-
 
|-
|style='background-color:#c00;'| nok
+
|style='background-color:#0a0;'| ok
 
|Kingston
 
|Kingston
 
|SDHC
 
|SDHC
|4
+
|16
|6
+
|10
 +
|SD10V/16GB
 
|
 
|
|Boots kernel but won't run init (times out). (works fine - Malvineous)
+
|Franeks 14 Feb 2013
|RoSha 10 May 2012, Malvineous 17 Jun 2012
 
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
 
|Kingston
 
|Kingston
 
|SDHC
 
|SDHC
|4
+
|32
 
|10
 
|10
|SD10V/4GB
+
|SD10G2/32GB, ultimateX 100X, SD10V
 
|
 
|
|Luismreis 2 Oct 2012
+
|Tony 29 May 2012, Pmvarsa 17 Jul 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
 
|Kingston
 
|Kingston
 
|SDHC
 
|SDHC
|8
+
|32
|4
+
|10
|SD4/8GB
+
|SD10V/32GB <br/>(N0415-002.A00LF TAIWAN JM94450-913.AOOLF)
|Works reliably with Raspbian 18-9-2012 and previous Debian releases (Picards)
+
|works
|Md84419 5 Nov 2011, Picards 28 Oct 2012
+
|Epa 20130304
 
|-
 
|-
|style='background-color:#c00;'| nok
+
|style='background-color:#0a0;'| ok
 
|Kingston
 
|Kingston
|SDHC
+
|SDXC
|8
+
|64
|4
+
|10
|SD4/8GB
+
|SDX10V/64GB
|does not work with current build of raspbmc (LastSilmaril), unreliable with raspbian (Quentinsf)
+
|
|LastSilmaril 24 May 2012, Quentinsf 20 Oct 2012
+
|Bromont 25 Nov 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
 
|Kingston
 
|Kingston
|SDHC
+
|SDXC
|8
+
|64
|6
 
|SD6/8GB
 
|errors on boot, but ok (Debian), does not work with raspbmc rc2 or archlinux
 
|Jamsta 5 Jun 2012
 
|-
 
|style='background-color:#0a0;'| ok
 
|Kingston
 
|SDHC
 
|8
 
 
|10
 
|10
|SD10G2/8GB ultimateX 100X, SD10V/8GB ultimateX 120X
+
|SD10G3/64GB UHS-I Elite
 
|
 
|
|ShiftPlusOne 24 Apr 2012, Stevepdp 13 May 2012
+
|Plnt 10 Jul 2013
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
 
|Kingston
 
|Kingston
|SDHC
+
|SDX
|8
+
|128
 
|10
 
|10
|SD10G3/8GB Elite
+
|SDX10V/128GB
|Works with Raspbian Wheezy 25/05/2013
+
|Must format it as FAT32.  Took a very long time for Pi to install system.
|Deicide 17 July 2013
+
|H. Matis 3 Dec 2013
 
|-
 
|-
 
|style='background-color:#c00;'| nok
 
|style='background-color:#c00;'| nok
 
|Kingston
 
|Kingston
|SDHC
+
|microSDHC
|8
+
|2
|10
+
|
|SD10V/8GB
+
|SD-CO2G
|Stevhorn: Very slow writing images to card and then either won't boot, or boots very slowly.<br />2rB: Card seems fine while in computer. In pi, only able to read the boot partition. OS will not boot.
+
|Does not boot. Capacity (1.97 GB) seems only just enough for 2013-02-09-wheezy-raspbian.img (1.94 GB).  
|Stevhorn 14 Aug 2012.<br />2rB 31 Dec 2013.
+
|Pe7er 18 Mar 2013
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
 
|Kingston
 
|Kingston
|SDHC
+
|microSDHC
|16
+
|2
|4
 
|SD4/16GB
 
 
|
 
|
|Skiesare 27 May 2012
+
|N0185-002.A00LF
 +
|Adapter (File system .img written via Transcend microSDHC "USB stick-like" adapter - P3-102510)
 +
|TrevorGowen 27 Jul 2012
 
|-
 
|-
|style='background-color:#c00;'| nok
+
|style='background-color:#0a0;'| ok
 
|Kingston
 
|Kingston
|SDHC
+
|microSDHC
|16
+
|4
 
|4
 
|4
|SDC4/16GB17
+
|
|Device does not recognize it
+
|
|Martink 24 Jul 2012
+
|Bredman 16 May 2012
 
|-
 
|-
|style='background-color:#0a0;'| ok
+
|style='background-color:#c00;'| ok
 
|Kingston
 
|Kingston
|SDHC
+
|microSDHC
|16
+
|4
|6
+
|4
|SD6/16GB
+
|SDC4/4GB (CO4G)
 +
|Starts to boot and fails. "... Kernel panic ... unable to mount root fs on unknown block ... "
 +
|ow3n 4 Oct 2013
 +
|-
 +
|style='background-color:#0a0;'| ok
 +
|Kingston
 +
|microSDHC
 +
|8
 +
|4
 +
|SDC4/8GB
 
|
 
|
|Malvineous 17 Jun 2012
+
|Lilt 9 May 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
 
|Kingston
 
|Kingston
|SDHC
+
|microSDHC
|16
+
|32
|10
+
|4
|SD10G2/16GB ultimateX 100X, SD4/16GBET
+
|SDC4/32GB (C32G)
 
|
 
|
|Stevepdp 13 May 2012
+
|ow3n 8 Oct 2013
 
|-
 
|-
|style='background-color:#c00;'| nok
+
|style='background-color:#c00;'| ok
 
|Kingston
 
|Kingston
|SDHC
+
|microSDHC
|16
+
|8
 
|10
 
|10
|SD10G2/16GB ultimateX 100X
+
|SDC10/8GB
|mmc0: Timeout waiting for hardware interrupt
+
|Work on Raspian, '''but doesn't work with NOOB'''. [Suggestion : download full image of O.S. and put it into SD card directly.]
|Kimmoli 27 Jan 2013
+
|webserfer 03 March 2013 submarine 03 Jan 2014
 
|-
 
|-
|style='background-color:#c00;'| nok
+
|style='background-color:#0a0;'| ok
 
|Kingston
 
|Kingston
|SDHC
+
|microSDHC
 
|16
 
|16
 
|10
 
|10
|SD10V/16GB
+
|SDC10/16GB
|Starts boot ok but then gets stuck in mmc0 timeouts
+
|Doesn't work with N0390-002.A00LF though (tested with Raspbian “wheezy”) - mmc0 timeouts, waiting for hw int. I wouldn't recommend buying this card. N0460-002.A00LF: Does not boot / io error from dmesg with os running from usb.
|Hh 14 Nov 2012
+
|Arrow 14 Jun 2012, J3rGuS 19 March 2013, Jettis 5 Sep 2013
 
|-
 
|-
|style='background-color:#c00;'| nok
+
|style='background-color:#0a0;'| ok
|Kingston
+
|Kodak
 
|SDHC
 
|SDHC
|16
+
|4
|10
+
|2
|SD10V/16GB <br/>(N0440-001. A00LF TAIWAN  JM94513-908.A00LF)
+
|
|mmc0 timeouts
+
|
|Epa 20130304
+
|Semtex 21 May 2012
 
|-
 
|-
|style='background-color:#c00;'| nok
+
|style='background-color:#0a0;'| ok
|Kingston
+
|Kodak
 
|SDHC
 
|SDHC
|16
+
|8
|10
+
|4
|SD10V/16GB <br/>(N0440-002. A00LF TAIWAN  JM94585-902.A00LF)
+
|
|not booting. no hdmi output. red leds on solid, green leds very lightly dimmed, no green flash/blink
+
|
|smerz 20131230
+
|Britaniola 22 Apr 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Kingston
+
|Kruidvat
 
|SDHC
 
|SDHC
|16
+
|8
|10
+
|4
|SD10V/16GB <br/>(N0372-002. A00LF TAIWAN  JM94450-901.A00LF)
+
|
|Seems to work
+
|
|Epa 20130403
+
|Boeboe 18 May 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Kingston
+
|Kruidvat
 
|SDHC
 
|SDHC
|16
+
|8
 
|10
 
|10
|SD10V/16GB
 
 
|
 
|
|Franeks 14 Feb 2013
+
|
 +
|Asiklov 25 Oct 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Kingston
+
|Lexar
 
|SDHC
 
|SDHC
|32
+
|4
|10
+
|4
|SD10G2/32GB, ultimateX 100X, SD10V
 
 
|
 
|
|Tony 29 May 2012, Pmvarsa 17 Jul 2012
+
|Boots consistently and no error messages in log after 1/2 hour use (works with Raspbmc - 321liftoff)
 +
|Russell 26 Apr 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Kingston
+
|Lexar
 
|SDHC
 
|SDHC
|32
+
|4
|10
+
|6
|SD10V/32GB <br/>(N0415-002.A00LF TAIWAN JM94450-913.AOOLF)
+
|Platinum II
|works
+
|
|Epa 20130304
+
|Pdp7 25 Apr 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Kingston
+
|Lexar
|SDXC
+
|SDHC
|64
+
|8
|10
+
|4
|SDX10V/64GB
+
|Milti-Use SDHC LSD8GB ASBWMC2 rev.B, on card 31352-oc4-8gbbm-a
|
+
|sold in 1 or 2 pack
|Bromont 25 Nov 2012
+
|Spyder Mar-2013
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Kingston
+
|Lexar
|SDXC
+
|SDHC
|64
+
|8
|10
+
|4
|SD10G3/64GB UHS-I Elite
+
|
 
|
 
|
|Plnt 10 Jul 2013
+
|Md84419 21 Apr 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Kingston
+
|Lexar
|SDX
+
|SDHC
|128
+
|8
|10
+
|6
|SDX10V/128GB
+
|Platinum II
|Must format it as FAT32.  Took a very long time for Pi to install system.
+
|
|H. Matis 3 Dec 2013
+
|Shirro 7 May 2012
 
|-
 
|-
 
|style='background-color:#c00;'| nok
 
|style='background-color:#c00;'| nok
|Kingston
+
|Lexar
|microSDHC
+
|SDHC
|2
+
|8
 +
|6
 +
|Premium series
 
|
 
|
|SD-CO2G
+
|blazi 17 December 2013
|Does not boot. Capacity (1.97 GB) seems only just enough for 2013-02-09-wheezy-raspbian.img (1.94 GB).
 
|Pe7er 18 Mar 2013
 
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Kingston
+
|Lexar
|microSDHC
+
|SDHC
|2
+
|8
|
+
|10
|N0185-002.A00LF
+
|Platinum II (200X) LSD8GBBBEU200C10
|Adapter (File system .img written via Transcend microSDHC "USB stick-like" adapter - P3-102510)
+
|Works fine on OpenElec 3.0.6
|TrevorGowen 27 Jul 2012
+
|Vygandas 18 Jun 2013
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Kingston
+
|Lexar
|microSDHC
+
|SDHC
|4
+
|8
|4
+
|10
|
+
|Platinum II UHS-I (LSD8GBBSBNA200C10 Rev C)
|
+
|Works fine w/NOOBS v1.3.4 Raspbian
|Bredman 16 May 2012
+
|fortran87 Jan 2014
|-
 
|style='background-color:#c00;'| ok
 
|Kingston
 
|microSDHC
 
|4
 
|4
 
|SDC4/4GB (CO4G)
 
|Starts to boot and fails. "... Kernel panic ... unable to mount root fs on unknown block ... "
 
|ow3n 4 Oct 2013
 
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Kingston
+
|Lexar
|microSDHC
+
|SDHC
|8
+
|16
|4
+
|6
|SDC4/8GB
+
|Platinum II
 
|
 
|
|Lilt 9 May 2012
+
|Semtex 21 May 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Kingston
+
|Lexar
|microSDHC
+
|SDXC
|32
+
|64
|4
+
|10
|SDC4/32GB (C32G)
+
|Premium series
|
+
|UHS-I
|ow3n 8 Oct 2013
+
|Kuisma 17 Apr 2013
 
|-
 
|-
|style='background-color:#c00;'| ok
+
|style='background-color:#0a0;'| ok
|Kingston
+
|Lexar
|microSDHC
+
|SDXC
|8
+
|128
 
|10
 
|10
|SDC10/8GB
+
|LSD128CTBNA400
|Work on Raspian, '''but doesn't work with NOOB'''. [Suggestion : download full image of O.S. and put it into SD card directly.]
+
|UHS-I
|webserfer 03 March 2013 submarine 03 Jan 2014
+
|AdamGreenblatt 12 Aug 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Kingston
+
|Lexar
 
|microSDHC
 
|microSDHC
|16
+
|32
 
|10
 
|10
|SDC10/16GB
+
|HIGH-SPEED
|Doesn't work with N0390-002.A00LF though (tested with Raspbian “wheezy”) - mmc0 timeouts, waiting for hw int. I wouldn't recommend buying this card. N0460-002.A00LF: Does not boot / io error from dmesg with os running from usb.
+
|
|Arrow 14 Jun 2012, J3rGuS 19 March 2013, Jettis 5 Sep 2013
+
|RogerH 5 Jul 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Kodak
+
|Master
 
|SDHC
 
|SDHC
|4
+
|16
|2
+
|10
 
|
 
|
|
+
|[man:0x000003 oem:0x5344 name:SMI  hwrev:0x1 fwrev:0x0]
|Semtex 21 May 2012
+
|Malvineous 1 Jul 2012
 
|-
 
|-
|style='background-color:#0a0;'| ok
+
|style='background-color:#c00;'| nok
|Kodak
+
|Master Optimum
 
|SDHC
 
|SDHC
|8
+
|16
|4
+
|10
 
|
 
|
|
+
|Only 1 red LED lit, no HDMI output. Started booting one single time then crashed during boot. No errors writing card on Mac
|Britaniola 22 Apr 2012
+
|User234891 23 May 2013
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Kruidvat
+
|Maxell
 
|SDHC
 
|SDHC
|8
+
|16
 
|4
 
|4
 +
|X-SERIES
 +
|MicroSD w/ adapter. Tested with latest version of Raspbian (as at date of entry).
 +
|Drummingsim 28 Jul 2013
 +
|-
 +
|style='background-color:#c00;'| nok
 +
|Maxell
 +
|SDHC
 +
|16
 +
|10
 +
|X-Series 83-P120001149-1
 
|
 
|
|
+
|Paul 26 Aug 2013
|Boeboe 18 May 2012
 
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Kruidvat
+
|Medion
 
|SDHC
 
|SDHC
 
|8
 
|8
|10
+
|4
 
|
 
|
 
|
 
|
|Asiklov 25 Oct 2012
+
|Buadhach 29 Jul 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Lexar
+
|Medion
|SDHC
+
|microSDHC
|4
+
|32
|4
+
|6
|
+
|MD86958
|Boots consistently and no error messages in log after 1/2 hour use (works with Raspbmc - 321liftoff)
+
|works well with NOOBS 1-2-1 and Raspbian
|Russell 26 Apr 2012
+
|Joerg 14 Aug 2013
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Lexar
+
|Medion
 
|SDHC
 
|SDHC
|4
+
|32
 
|6
 
|6
|Platinum II
+
|MD86965
|
+
|works well with NOOBS 1-2-1, Raspbian and RiscOS
|Pdp7 25 Apr 2012
+
|Joerg 19 Aug 2013
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Lexar
+
|Memorex Travel Card
 
|SDHC
 
|SDHC
 
|8
 
|8
|4
+
|10
|Milti-Use SDHC LSD8GB ASBWMC2 rev.B, on card 31352-oc4-8gbbm-a
+
|?
|sold in 1 or 2 pack
+
|Works well with Raspbian 2013-09-25.
|Spyder Mar-2013
+
|The Doctor, 25 October 2013
 
|-
 
|-
|style='background-color:#0a0;'| ok
+
|style='background-color:#c00;'| nok
|Lexar
+
|Memory2Go
 
|SDHC
 
|SDHC
|8
 
 
|4
 
|4
|
+
|6
|
+
|S404G1029
|Md84419 21 Apr 2012
+
|I/O Errors leading to Kernel Panic on startup
|-
+
|Snohi 12 Jun 2012
|style='background-color:#0a0;'| ok
 
|Lexar
 
|SDHC
 
|8
 
|6
 
|Platinum II
 
|
 
|Shirro 7 May 2012
 
 
|-
 
|-
 
|style='background-color:#c00;'| nok
 
|style='background-color:#c00;'| nok
|Lexar
+
|Microcenter
 
|SDHC
 
|SDHC
|8
+
|4
|6
+
|4
|Premium series
 
 
|
 
|
|blazi 17 December 2013
+
|hasn't worked with any of the images I've tried; appears to be completely unrecognized
 +
|Pnppl 11 Jun 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Lexar
+
|Microcenter
 
|SDHC
 
|SDHC
 
|8
 
|8
|10
+
|4
|Platinum II (200X) LSD8GBBBEU200C10
+
|0289508
|Works fine on OpenElec 3.0.6
+
|(sold in bins at checkout)
|Vygandas 18 Jun 2013
+
|Pdp7 25 Apr 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Lexar
+
|Microcenter
 
|SDHC
 
|SDHC
 
|8
 
|8
 
|10
 
|10
|Platinum II UHS-I (LSD8GBBSBNA200C10 Rev C)
+
|0349728
|Works fine w/NOOBS v1.3.4 Raspbian
+
|(sold in bins at checkout)
|fortran87 Jan 2014
+
|Pdp7 25 Apr 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Lexar
+
|Microcenter
 
|SDHC
 
|SDHC
 
|16
 
|16
|6
+
|10
|Platinum II
 
 
|
 
|
|Semtex 21 May 2012
+
|(sold in bins at checkout)
 +
|Crayfishandy 11 Jul 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Lexar
+
|Mushkin
|SDXC
+
|SDHC
|64
+
|16
 
|10
 
|10
|Premium series
+
|MKNSDHCU1-16GB
|UHS-I
+
|
|Kuisma 17 Apr 2013
+
|Frank26080115 1 Jul 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Lexar
+
|Mushkin
|SDXC
+
|SDHC
|128
+
|32
 
|10
 
|10
|LSD128CTBNA400
+
|MKNSDHCC10-32GB
|UHS-I
+
|
|AdamGreenblatt 12 Aug 2012
+
|Openboat 30 May 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Lexar
+
|Mustang
|microSDHC
+
|SDHC
|32
+
|8
 
|10
 
|10
|HIGH-SPEED
+
|SD8GHCCL10MU-R
 
|
 
|
|RogerH 5 Jul 2012
+
|Xanatos 31 May 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Master
+
|MyMemory
 
|SDHC
 
|SDHC
|16
+
|8
 
|10
 
|10
|
+
|MYMESDH8G10
|[man:0x000003 oem:0x5344 name:SMI  hwrev:0x1 fwrev:0x0]
+
|(latest batch not working - Bubblebobble)
|Malvineous 1 Jul 2012
+
|Rew 18 Apr 2012
 
|-
 
|-
 
|style='background-color:#c00;'| nok
 
|style='background-color:#c00;'| nok
|Master Optimum
+
|MyMemory
 
|SDHC
 
|SDHC
|16
+
|8
 
|10
 
|10
 
|
 
|
|Only 1 red LED lit, no HDMI output. Started booting one single time then crashed during boot. No errors writing card on Mac
+
|
|User234891 23 May 2013
+
|Jezmck 27 Apr 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Maxell
+
|MyMemory
 
|SDHC
 
|SDHC
 
|16
 
|16
|4
+
|10
|X-SERIES
+
|MYMESDH16G10
|MicroSD w/ adapter. Tested with latest version of Raspbian (as at date of entry).
+
|
|Drummingsim 28 Jul 2013
+
|Jblackburn 9 Jun 2012
 
|-
 
|-
|style='background-color:#c00;'| nok
+
|style='background-color:#0a0;'| ok
|Maxell
+
|MyMemory
 
|SDHC
 
|SDHC
|16
+
|32
 
|10
 
|10
|X-Series 83-P120001149-1
 
 
|
 
|
|Paul 26 Aug 2013
+
|
 +
|Dale2507 10 Nov 2012
 +
|-
 +
|style='background-color:#0a0;'| ok
 +
|OCZ
 +
|SDHC
 +
|8
 +
|6
 +
|Gold Series (08110596-8GB-6)
 +
|tested with debian6-19-04-2012
 +
|Alkarex 16 Jun 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Medion
+
|Optima
 
|SDHC
 
|SDHC
 
|8
 
|8
 
|4
 
|4
 
|
 
|
|
+
|Does not boot with Raspbian Wheezy 2012-07-15. Works with 2012-09-18
|Buadhach 29 Jul 2012
+
|Penguintutor 19 Aug 2012 / 10 Oct 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Medion
+
|Optima
|microSDHC
+
|SDHC
|32
+
|8
|6
+
|10
|MD86958
+
|Pro-Speed
|works well with NOOBS 1-2-1 and Raspbian
+
|
|Joerg 14 Aug 2013
+
|DaWoodster 13 May 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Medion
+
|Panasonic
 
|SDHC
 
|SDHC
|32
+
|4
|6
+
|4
|MD86965
+
|
|works well with NOOBS 1-2-1, Raspbian and RiscOS
+
|
|Joerg 19 Aug 2013
+
|Mikerr 5 Jul 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Memorex Travel Card
+
|Panasonic
 
|SDHC
 
|SDHC
|8
+
|4
 
|10
 
|10
|?
+
|UHS-I
|Works well with Raspbian 2013-09-25.
+
|(~11.2MB/s read, ~6.2MB/s write)
|The Doctor, 25 October 2013
+
|M4rcs 26 Jul 2012
 
|-
 
|-
|style='background-color:#c00;'| nok
+
|style='background-color:#0a0;'| ok
|Memory2Go
+
|Panasonic
 
|SDHC
 
|SDHC
 
|4
 
|4
|6
+
|10
|S404G1029
+
|RP-SDRB04G
|I/O Errors leading to Kernel Panic on startup
+
|Tested with Rasbian Wheezy
|Snohi 12 Jun 2012
+
|jwdietrich 02 Jun 2013
 
|-
 
|-
|style='background-color:#c00;'| nok
+
|style='background-color:#0a0;'| ok
|Microcenter
+
|Panasonic
 
|SDHC
 
|SDHC
 
|4
 
|4
 
|4
 
|4
|
+
|RP-SDLB04GAK
|hasn't worked with any of the images I've tried; appears to be completely unrecognized
+
|Tested with Pidora (Fedora)
|Pnppl 11 Jun 2012
+
|jwdietrich 06 Jul 2013
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Microcenter
+
|Panasonic
 
|SDHC
 
|SDHC
 
|8
 
|8
|4
+
|2
|0289508
+
|
|(sold in bins at checkout)
+
|(~11.1MB/s read, ~9.7MB/s write)
|Pdp7 25 Apr 2012
+
|Malexmave 19 Jul 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Microcenter
+
|Panasonic
 
|SDHC
 
|SDHC
 
|8
 
|8
|10
+
|6
|0349728
+
|
|(sold in bins at checkout)
+
|~4.8MB/s read, ~4.4MB/s write, following the Performance below
|Pdp7 25 Apr 2012
+
|Xonx 21 Apr 2012
 
|-
 
|-
|style='background-color:#0a0;'| ok
+
|style='background-color:#c00;'| nok
|Microcenter
+
|Panasonic
 
|SDHC
 
|SDHC
|16
+
|8
 
|10
 
|10
|
+
|RP-SDU08GD1K - London-2012-Collection
|(sold in bins at checkout)
+
|mmc0: timeout waiting for hardware interrupt
|Crayfishandy 11 Jul 2012
+
|Selsinork 26 Apr 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Mushkin
+
|Patriot
 
|SDHC
 
|SDHC
|16
+
|8
|10
+
|6
|MKNSDHCU1-16GB
+
|PSF8GSDHC10-PC
 
|
 
|
|Frank26080115 1 Jul 2012
+
|Paradigmic 7 Jun 2012
 +
|-
 +
|style='background-color:#c00;'| nok
 +
|Patriot
 +
|SDHC
 +
|8
 +
|6
 +
|PS8GSDHC10-BC
 +
|repeatable corruption after 1 or 2 reboots with 2012-07-15-wheezy-raspbian
 +
|Ntrepid8 17 Aug 2012
 
|-
 
|-
|style='background-color:#0a0;'| ok
+
|style='background-color:#c00;'| nok
|Mushkin
+
|Patriot
 
|SDHC
 
|SDHC
|32
+
|8
 
|10
 
|10
|MKNSDHCC10-32GB
+
|PSF16GMCSDHC10
 
|
 
|
|Openboat 30 May 2012
+
|Elatllat 22 Dec 2011
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Mustang
+
|Patriot
 
|SDHC
 
|SDHC
 
|8
 
|8
 
|10
 
|10
|SD8GHCCL10MU-R
+
|LX Series PSF8GSDHC10-PC1
 
|
 
|
|Xanatos 31 May 2012
+
|Nugget 9 Jun 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|MyMemory
+
|Patriot
 
|SDHC
 
|SDHC
|8
+
|16
 
|10
 
|10
|MYMESDH8G10
+
|LX Series PSF16GSDHC10-PC1 (PSF16GSDHC10)
|(latest batch not working - Bubblebobble)
+
|Tested with Rasbian Wheezy
|Rew 18 Apr 2012
+
|Leonardicus 25 Jun 2013
 
|-
 
|-
 
|style='background-color:#c00;'| nok
 
|style='background-color:#c00;'| nok
|MyMemory
+
|Patriot
 
|SDHC
 
|SDHC
 
|8
 
|8
 
|10
 
|10
|
+
|PSF8GSDHC10-PC
|
+
|won't even boot 2012-08-16-wheezy-raspbian (mmc0: timeout waiting for hardware interrupt, followed by continuous I/O errors, timeouts, etc). Seems functional in Arch, but sometimes freezes at the beginning of boot (blinking underscore)
|Jezmck 27 Apr 2012
+
|Dgatwood 12 Sep 2012
 +
|-
 +
|style='background-color:#c00;'| nok
 +
|Patriot
 +
|microSDHC
 +
|8
 +
|10
 +
|PSF8GMCSDHC10
 +
|I observed behavior similar to the full size version of this card (mmc0: timeout waiting for hardware interrupt, followed by continuous I/O errors, timeouts, etc).
 +
|CVBruce 25 Jan 2013
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|MyMemory
+
|Patriot
 
|SDHC
 
|SDHC
|16
+
|8
 
|10
 
|10
|MYMESDH16G10
+
|LX Series PSF8GSDHC102PK
|
+
|Twin pack
|Jblackburn 9 Jun 2012
+
|verket 8 Jan 2013
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|MyMemory
+
|Patriot
 
|SDHC
 
|SDHC
|32
+
|16
 
|10
 
|10
|
+
|LX Series (PSF16GSDHC10)
|
+
|19.3MB/s read, 9.3MB/s write
|Dale2507 10 Nov 2012
+
|Jamesnine 28 Jun 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|OCZ
+
|Patriot
 
|SDHC
 
|SDHC
|8
+
|32
|6
+
|10
|Gold Series (08110596-8GB-6)
+
|PSF32GSDHC10
|tested with debian6-19-04-2012
 
|Alkarex 16 Jun 2012
 
|-
 
|style='background-color:#0a0;'| ok
 
|Optima
 
|SDHC
 
|8
 
|4
 
 
|
 
|
|Does not boot with Raspbian Wheezy 2012-07-15. Works with 2012-09-18
+
|Megs 29 May 2012
|Penguintutor 19 Aug 2012 / 10 Oct 2012
 
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Optima
+
|Patriot
 
|SDHC
 
|SDHC
|8
+
|32
 
|10
 
|10
|Pro-Speed
+
|UHS-1 PEF32GSDHC10U1
|
+
|20.4MB/s read, 12.1MB/s write
|DaWoodster 13 May 2012
+
|Bengoerz 12 Aug 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Panasonic
+
|Patriot
|SDHC
+
|microSDHC
|4
+
|16
|4
+
|10
|
+
|PSF16GMCSDHC10
|
+
|requires recent kernel update for boot
|Mikerr 5 Jul 2012
+
|Wmdopple 9 Jun 2012
 +
|-
 +
|style='background-color:#c00;'| nok
 +
|Patriot
 +
|microSDHC
 +
|16
 +
|10
 +
|PSF16GMCSDHC10
 +
|fails with 2012-12-16-wheezy-raspbian and with 1/8/13 kernel update. mmc0: controller never released inhibit bit(s) and
 +
mmc0: timeout waiting for hardware interrupt. Other cards work.
 +
|verket 8 Jan 2013
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Panasonic
+
|Peak
|SDHC
+
|microSDHC
 +
|4
 
|4
 
|4
|10
+
|MMBTR04GUBCA-ME
|UHS-I
+
|tested with Arch
|(~11.2MB/s read, ~6.2MB/s write)
+
|Selsinork 20 Apr 2012
|M4rcs 26 Jul 2012
 
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Panasonic
+
|Philips
 
|SDHC
 
|SDHC
 +
|8
 
|4
 
|4
|10
+
|FM08SD35B
|RP-SDRB04G
+
|
|Tested with Rasbian Wheezy
+
|Oostenvr 4 Jul 2012
|jwdietrich 02 Jun 2013
 
 
|-
 
|-
|style='background-color:#0a0;'| ok
+
|style='background-color:#c00;'| nok
|Panasonic
+
|Philips
|SDHC
+
|microSDHC
 +
|8
 
|4
 
|4
|4
+
|FM08MD35B
|RP-SDLB04GAK
+
|(man:0x000027 oem:0x5048 name:SD08G hwrev:0x3 fwrev:0x0), with microSD to SD adapter, boots, (mmc0: timeout waiting for hardware interrupt, followed by continuous I/O errors, timeouts, etc), 2013-02-09-wheezy-raspbian
|Tested with Pidora (Fedora)
+
|Bernard Ladenthin 12 Mar 2013
|jwdietrich 06 Jul 2013
 
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Panasonic
+
|Platinum
 
|SDHC
 
|SDHC
|8
+
|4
|2
+
|6
 +
|
 
|
 
|
|(~11.1MB/s read, ~9.7MB/s write)
+
|Njoyard 6 Jul 2012
|Malexmave 19 Jul 2012
 
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Panasonic
+
|Platinum
 
|SDHC
 
|SDHC
|8
+
|4
|6
+
|10
|
+
|127660
|~4.8MB/s read, ~4.4MB/s write, following the Performance below
+
|Tested with a Raspbian Wheezy using a custom and a stock kernel. Both Ok.
|Xonx 21 Apr 2012
+
|cpb 15 oct 2013
 
|-
 
|-
 
|style='background-color:#c00;'| nok
 
|style='background-color:#c00;'| nok
|Panasonic
+
|Platinum
|SDHC
 
|8
 
|10
 
|RP-SDU08GD1K - London-2012-Collection
 
|mmc0: timeout waiting for hardware interrupt
 
|Selsinork 26 Apr 2012
 
|-
 
|style='background-color:#0a0;'| ok
 
|Patriot
 
 
|SDHC
 
|SDHC
 
|8
 
|8
 
|6
 
|6
|PSF8GSDHC10-PC
+
| Fails with mmc error (7 cards in 10) on ccidentalis_v02. Fails on laptops which use mmc driver instead of SATA
|
+
|(man:0x00006f oem:0x0000 name:SMI  hwrev:0x1 fwrev:0x0)
|Paradigmic 7 Jun 2012
+
|Leucos 22 March 2013
 
|-
 
|-
 
|style='background-color:#c00;'| nok
 
|style='background-color:#c00;'| nok
|Patriot
+
|Platinum
 
|SDHC
 
|SDHC
 
|8
 
|8
|6
 
|PS8GSDHC10-BC
 
|repeatable corruption after 1 or 2 reboots with 2012-07-15-wheezy-raspbian
 
|Ntrepid8 17 Aug 2012
 
|-
 
|style='background-color:#c00;'| nok
 
|Patriot
 
|SDHC
 
 
|8
 
|8
|10
+
|O08G840 M3100487 TW
|PSF16GMCSDHC10
 
 
|
 
|
|Elatllat 22 Dec 2011
+
|MaWe 13 Aug 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Patriot
+
|Platinum
 
|SDHC
 
|SDHC
 
|8
 
|8
 
|10
 
|10
|LX Series PSF8GSDHC10-PC1
+
|RTK247T5MD08G order no. 126982
 
|
 
|
|Nugget 9 Jun 2012
+
|Cobalt 9 Apr 2013
|-
 
|style='background-color:#0a0;'| ok
 
|Patriot
 
|SDHC
 
|16
 
|10
 
|LX Series PSF16GSDHC10-PC1 (PSF16GSDHC10)
 
|Tested with Rasbian Wheezy
 
|Leonardicus 25 Jun 2013
 
 
|-
 
|-
 
|style='background-color:#c00;'| nok
 
|style='background-color:#c00;'| nok
|Patriot
+
|Platinum
 
|SDHC
 
|SDHC
 
|8
 
|8
 
|10
 
|10
|PSF8GSDHC10-PC
+
|8DK52-131ME
|won't even boot 2012-08-16-wheezy-raspbian (mmc0: timeout waiting for hardware interrupt, followed by continuous I/O errors, timeouts, etc). Seems functional in Arch, but sometimes freezes at the beginning of boot (blinking underscore)
+
|hctosys.c: unable to open rtc device (rtc0)<br />mmc0: Timeout waiting for hardware interrupt - cmd18<br />mmc0: Timeout waiting for hardware interrupt - cmd12<br />mmc0: Timeout waiting for hardware interrupt - cmd13<br />mmcblk0: error -110 sending status command, retrying<br />mmc0: Timeout waiting for hardware interrupt - cmd13<br />mmcblk0: error -110 sending status command, retrying<br />mmc0: Timeout waiting for hardware interrupt - cmd13<br />mmcblk0: error -110 sending status command, aborting<br />mmc0: Timeout waiting for hardware interrupt - cmd13<br />mmc0: Timeout waiting for hardware interrupt - cmd13<br />mmc0: Timeout waiting for hardware interrupt - cmd13<br />mmc0: Timeout waiting for hardware interrupt - cmd13<br />Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(179,2)<br />on Arch Linux ARM hf 2013-02-11
|Dgatwood 12 Sep 2012
+
|Cobalt 9 Apr 2013
 
|-
 
|-
 
|style='background-color:#c00;'| nok
 
|style='background-color:#c00;'| nok
|Patriot
+
|Platinum
|microSDHC
+
|SDHC
|8
+
|16
 
|10
 
|10
|PSF8GMCSDHC10
+
|
|I observed behavior similar to the full size version of this card (mmc0: timeout waiting for hardware interrupt, followed by continuous I/O errors, timeouts, etc).
+
|Does not boot with Raspbian Wheezy 2012-09-12
|CVBruce 25 Jan 2013
+
|Palto 13 Sep 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Patriot
+
|Platinum
|SDHC
+
|SDXC
|8
+
|64
 
|10
 
|10
|LX Series PSF8GSDHC102PK
+
|
|Twin pack
+
|
|verket 8 Jan 2013
+
|Datafreak 30 Jul 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Patriot
+
|Platinum
|SDHC
+
|SDXC
|16
+
|128
 
|10
 
|10
|LX Series (PSF16GSDHC10)
+
|
|19.3MB/s read, 9.3MB/s write
+
|man:0x000074 oem:0x4a45 name:SDU1  hwrev:0x0 fwrev:0x2 Tested with BerryTerminal, NOOBS, OpenELEC, Raspbian and Raspbmc
|Jamesnine 28 Jun 2012
+
|Ienny 25 Sep 2013
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Patriot
+
|Platinum
|SDHC
+
|microSDHC
|32
+
|16
|10
+
|6
|PSF32GSDHC10
+
|
 
|
 
|
|Megs 29 May 2012
+
|gecko16300 24 Aug 2013
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Patriot
+
|Play.com
 
|SDHC
 
|SDHC
|32
+
|4
|10
+
|6
|UHS-1 PEF32GSDHC10U1
+
|S4E3CD04GEFAA 0907090121106
|20.4MB/s read, 12.1MB/s write
+
|
|Bengoerz 12 Aug 2012
+
|JoeDaStudd 18 May 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Patriot
+
|PNY
|microSDHC
+
|SD
|16
+
|2
|10
+
|?
|PSF16GMCSDHC10
+
|SD-M02G
|requires recent kernel update for boot
+
|
|Wmdopple 9 Jun 2012
+
|Ewindich 24 Jul 2012
|-
 
|style='background-color:#c00;'| nok
 
|Patriot
 
|microSDHC
 
|16
 
|10
 
|PSF16GMCSDHC10
 
|fails with 2012-12-16-wheezy-raspbian and with 1/8/13 kernel update. mmc0: controller never released inhibit bit(s) and
 
mmc0: timeout waiting for hardware interrupt. Other cards work.
 
|verket 8 Jan 2013
 
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Peak
+
|PNY
|microSDHC
+
|SDHC
 
|4
 
|4
 
|4
 
|4
|MMBTR04GUBCA-ME
+
|
|tested with Arch
+
|
|Selsinork 20 Apr 2012
+
|Md84419 21 Apr 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Philips
+
|PNY
 
|SDHC
 
|SDHC
|8
 
 
|4
 
|4
|FM08SD35B
+
|4
 +
|Optima (SD-K04G 0834TT1297Y)
 
|
 
|
|Oostenvr 4 Jul 2012
+
|Weston 20 May 2012
 
|-
 
|-
 
|style='background-color:#c00;'| nok
 
|style='background-color:#c00;'| nok
|Philips
+
|PNY
|microSDHC
+
|SDHC
 
|8
 
|8
 
|4
 
|4
|FM08MD35B
+
|Optima 120 HD SD-K08G 0928 WF3673
|(man:0x000027 oem:0x5048 name:SD08G hwrev:0x3 fwrev:0x0), with microSD to SD adapter, boots, (mmc0: timeout waiting for hardware interrupt, followed by continuous I/O errors, timeouts, etc), 2013-02-09-wheezy-raspbian
+
|mmc -110 errors at init time on 12 Jun 2012
|Bernard Ladenthin 12 Mar 2013
+
|Zoward 12 Jun 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Platinum
+
|PNY
 
|SDHC
 
|SDHC
 +
|8
 
|4
 
|4
|6
+
|Premium (Toshiba SD-K08G)
|
+
| Works with 2014-01-07-wheezy-raspbian
|
+
|PotOfJava 08 Feb 2014
|Njoyard 6 Jul 2012
 
|-
 
|style='background-color:#0a0;'| ok
 
|Platinum
 
|SDHC
 
|4
 
|10
 
|127660
 
|Tested with a Raspbian Wheezy using a custom and a stock kernel. Both Ok.
 
|cpb 15 oct 2013
 
 
|-
 
|-
 
|style='background-color:#c00;'| nok
 
|style='background-color:#c00;'| nok
|Platinum
+
|PNY
 
|SDHC
 
|SDHC
 
|8
 
|8
|6
+
|4
| Fails with mmc error (7 cards in 10) on ccidentalis_v02. Fails on laptops which use mmc driver instead of SATA
+
|Premium
|(man:0x00006f oem:0x0000 name:SMI hwrev:0x1 fwrev:0x0)
+
|mmc - mmc0: timeout waiting for hardware interrupt
|Leucos 22 March 2013
+
|Davidgyoung 21 Sep 2012
 
|-
 
|-
|style='background-color:#c00;'| nok
+
|style='background-color:#0a0;'| ok
|Platinum
+
|PNY
 
|SDHC
 
|SDHC
 
|8
 
|8
|8
+
|6
|O08G840 M3100487 TW
+
|
 
|
 
|
|MaWe 13 Aug 2012
+
|Threedaymonk 5 Jun 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Platinum
+
|PNY
 
|SDHC
 
|SDHC
 
|8
 
|8
 
|10
 
|10
|RTK247T5MD08G order no. 126982
+
|P-SDHC8G10-GE
 +
|1 - Tested with 2013-02-09-wheezy. 2 - On Mac, dd to image did not work, but SD Card Builder did.  Wheezy read and write right at about 20MBps.  After booting, I installed several packages - all fine.  After that, I installed RetroPie.  That took about 15 hours to download and compile - zero errors.
 +
|1 - Zambon 9 Mar 2013, 2 - RicM July 17 2013
 +
|-
 +
|style='background-color:#0a0;'| ok
 +
|PNY
 +
|SDHC
 +
|16
 +
|4
 +
|
 
|
 
|
|Cobalt 9 Apr 2013
+
|Gcat 14 May 2012
 
|-
 
|-
|style='background-color:#c00;'| nok
+
|style='background-color:#0a0;'| ok
|Platinum
+
|PNY
 
|SDHC
 
|SDHC
|8
+
|16
 +
|10
 +
|P-SDHC16G10-GE, P-SDHC16G10-EF, Pro-Elite P-SDHC16U10-30-GE
 +
|Works with Wheezy, does not work with Squeeze (mmc0: timeout...), Arch (no boot) (Joshdev), or Fedora Remix. Works with Raspbmc (Sp00l)
 +
|Jecxjo 9 Jun 2012, Joshdev 22 Jun 2012, Sp00l 21 Jul 2012
 +
|-
 +
|style='background-color:#0a0;'| ok
 +
|PNY
 +
|SDHC
 +
|32
 
|10
 
|10
|8DK52-131ME
+
|P-SDHC32G10-GE
|hctosys.c: unable to open rtc device (rtc0)<br />mmc0: Timeout waiting for hardware interrupt - cmd18<br />mmc0: Timeout waiting for hardware interrupt - cmd12<br />mmc0: Timeout waiting for hardware interrupt - cmd13<br />mmcblk0: error -110 sending status command, retrying<br />mmc0: Timeout waiting for hardware interrupt - cmd13<br />mmcblk0: error -110 sending status command, retrying<br />mmc0: Timeout waiting for hardware interrupt - cmd13<br />mmcblk0: error -110 sending status command, aborting<br />mmc0: Timeout waiting for hardware interrupt - cmd13<br />mmc0: Timeout waiting for hardware interrupt - cmd13<br />mmc0: Timeout waiting for hardware interrupt - cmd13<br />mmc0: Timeout waiting for hardware interrupt - cmd13<br />Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(179,2)<br />on Arch Linux ARM hf 2013-02-11
+
|Works with Arch 2012-09-18 and Raspbian 2012-12-16
|Cobalt 9 Apr 2013
+
|Derekivey 29 Dec 2012
 
|-
 
|-
 
|style='background-color:#c00;'| nok
 
|style='background-color:#c00;'| nok
|Platinum
+
|PNY
 
|SDHC
 
|SDHC
|16
+
|32
 
|10
 
|10
|
+
|Professional (P-SDHC32G10-EF)
|Does not boot with Raspbian Wheezy 2012-09-12
+
|(mmc0 timeout with Debian, error -84 whilst initialising sd card with Fedora and QtonPi. Arch seems to work, gets to the login prompt)
|Palto 13 Sep 2012
+
|Optim4l 9 May 2012
 
|-
 
|-
|style='background-color:#0a0;'| ok
+
|style='background-color:#c00;'| nok
|Platinum
+
|PNY
|SDXC
+
|SDHC
|64
+
|32
 
|10
 
|10
|
+
|Pro
|
+
|Debian installation worked, [brand new] Card died a few minutes later with mmc0 timeouts, during apt-get upgrade. Never got it to work again on any system
|Datafreak 30 Jul 2012
+
|Gryzor 10 May 2013
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Platinum
+
|PNY
|SDXC
+
|SDHC
|128
+
|32
 
|10
 
|10
|
+
|P-SDH32U1H-GES3 Elite Performance
|man:0x000074 oem:0x4a45 name:SDU1  hwrev:0x0 fwrev:0x2 Tested with BerryTerminal, NOOBS, OpenELEC, Raspbian and Raspbmc
+
|Happily banging away for over a month now; Raspbian Linux 3.6.11+ #456 PREEMPT armv6l system v,3.3.3
|Ienny 25 Sep 2013
+
|Jerasmussen 12 Aug 2013
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Platinum
+
|PNY
 
|microSDHC
 
|microSDHC
|16
+
|4
|6
+
|4
 
|
 
|
|
+
|with adapter
|gecko16300 24 Aug 2013
+
|Zulucat 21 Jun 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Play.com
+
|PNY
|SDHC
+
|microSDHC
|4
+
|8
|6
+
|10
|S4E3CD04GEFAA 0907090121106
 
 
|
 
|
|JoeDaStudd 18 May 2012
+
|with adapter
 +
|Zulucat 6 Jul 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
 
|PNY
 
|PNY
|SD
+
|microSDHC
|2
+
|32
|?
+
|10
|SD-M02G
 
 
|
 
|
|Ewindich 24 Jul 2012
+
|with AdaFruit adapter
 +
|Wibble 22 Jan 2013
 +
|-
 +
|style='background-color:#c00;'| nok
 +
|Polaroid
 +
|SDHC
 +
|16
 +
|10
 +
|P-SDHC16GB10-EFPOL
 +
|mmc0: timeout waiting for hardware interrupt on debian6-19-04-2012
 +
|Jamesnine 28 Jun 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|PNY
+
|PQI
 
|SDHC
 
|SDHC
|4
+
|8
|4
+
|6
 
|
 
|
|
+
|Works with official debian6-19-04-2012
|Md84419 21 Apr 2012
+
|Remick 12 Jul 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|PNY
+
|PRETEC
 
|SDHC
 
|SDHC
|4
+
|8
|4
+
|10
|Optima (SD-K04G 0834TT1297Y)
+
|8DK52-122ME
 
|
 
|
|Weston 20 May 2012
+
|ScorpAl 19 Jun 2012
 
|-
 
|-
 
|style='background-color:#c00;'| nok
 
|style='background-color:#c00;'| nok
|PNY
+
|PRETEC
 
|SDHC
 
|SDHC
 
|8
 
|8
|4
+
|10
|Optima 120 HD SD-K08G 0928 WF3673
+
|233x (PC10SDHC08G)
|mmc -110 errors at init time on 12 Jun 2012
+
|mmc0: timeout waiting for hardware interrupt, Sometimes does not boot, kernel panic
|Zoward 12 Jun 2012
+
|Petacz 8 Aug 2012, DarkKnightCZ 23 Jan 2013
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|PNY
+
|promaster.com
 
|SDHC
 
|SDHC
 
|8
 
|8
|4
+
|10
|Premium (Toshiba SD-K08G)
+
|
| Works with 2014-01-07-wheezy-raspbian
+
|man:0x000027 oem:0x5048 name:SD08G hwrev:0x3 fwrev:0x0
|PotOfJava 08 Feb 2014
+
|Douglas W. Jones Jan 2013
 
|-
 
|-
 
|style='background-color:#c00;'| nok
 
|style='background-color:#c00;'| nok
|PNY
+
|Reekin
|SDHC
+
|SD
|8
 
 
|4
 
|4
|Premium
+
|?
|mmc -  mmc0: timeout waiting for hardware interrupt
+
|
|Davidgyoung 21 Sep 2012
+
|doesn't boot
 +
|Nicobsa 11 Jul 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|PNY
+
|Samsung
 
|SDHC
 
|SDHC
|8
+
|4
|6
+
|?
 
|
 
|
 
|
 
|
|Threedaymonk 5 Jun 2012
+
|Genocho 26 Apr 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|PNY
+
|Samsung
 
|SDHC
 
|SDHC
|8
 
|10
 
|P-SDHC8G10-GE
 
|1 - Tested with 2013-02-09-wheezy. 2 - On Mac, dd to image did not work, but SD Card Builder did.  Wheezy read and write right at about 20MBps.  After booting, I installed several packages - all fine.  After that, I installed RetroPie.  That took about 15 hours to download and compile - zero errors.
 
|1 - Zambon 9 Mar 2013, 2 - RicM July 17 2013
 
|-
 
|style='background-color:#0a0;'| ok
 
|PNY
 
|SDHC
 
|16
 
 
|4
 
|4
 +
|?
 
|
 
|
 
|
 
|
|Gcat 14 May 2012
+
|Genocho 26 Apr 2012
 
|-
 
|-
|style='background-color:#0a0;'| ok
+
|style='background-color:#c00;'| nok
|PNY
+
|Samsung
 
|SDHC
 
|SDHC
|16
+
|4
|10
+
|4
|P-SDHC16G10-GE, P-SDHC16G10-EF, Pro-Elite P-SDHC16U10-30-GE
+
|MB-SS4G MBSS4GMBDDBA-DD
|Works with Wheezy, does not work with Squeeze (mmc0: timeout...), Arch (no boot) (Joshdev), or Fedora Remix. Works with Raspbmc (Sp00l)
+
|doesn't boot with 2012-07-15-wheezy-raspbian; OK light partially lit
|Jecxjo 9 Jun 2012, Joshdev 22 Jun 2012, Sp00l 21 Jul 2012
+
|Doctoruseful 19 Aug 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|PNY
+
|Samsung
 
|SDHC
 
|SDHC
|32
+
|8
|10
+
|6
|P-SDHC32G10-GE
+
|MB-SS8GAEU
|Works with Arch 2012-09-18 and Raspbian 2012-12-16
+
|
|Derekivey 29 Dec 2012
+
|Dakaix 24 Apr 2012
|-
+
|-
|style='background-color:#c00;'| nok
+
|style='background-color:#0a0;'| ok
|PNY
+
|Samsung
 
|SDHC
 
|SDHC
|32
+
|8
 
|10
 
|10
|Professional (P-SDHC32G10-EF)
+
|MB-MP8GA, MB-SP8GA/EU, MB-SP8GA/AM
|(mmc0 timeout with Debian, error -84 whilst initialising sd card with Fedora and QtonPi. Arch seems to work, gets to the login prompt)
+
|
|Optim4l 9 May 2012
+
|Garrocha 19 May 2012
 
|-
 
|-
|style='background-color:#c00;'| nok
+
|style='background-color:#0a0;'| ok
|PNY
+
|Samsung
 
|SDHC
 
|SDHC
|32
+
|16
|10
+
|6
|Pro
+
|MB-SSAGAEU
|Debian installation worked, [brand new] Card died a few minutes later with mmc0 timeouts, during apt-get upgrade. Never got it to work again on any system
+
|
|Gryzor 10 May 2013
+
|Dakaix 24 Apr 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|PNY
+
|Samsung
 
|SDHC
 
|SDHC
|32
+
|16
|10
+
|6
|P-SDH32U1H-GES3 Elite Performance
+
|MB-SSAGB/EU
|Happily banging away for over a month now; Raspbian Linux 3.6.11+ #456 PREEMPT armv6l system v,3.3.3
 
|Jerasmussen 12 Aug 2013
 
|-
 
|style='background-color:#0a0;'| ok
 
|PNY
 
|microSDHC
 
|4
 
|4
 
 
|
 
|
|with adapter
+
|leon.anavi 26 Jun 2013
|Zulucat 21 Jun 2012
 
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|PNY
+
|Samsung
|microSDHC
+
|SDHC
|8
+
|16
 
|10
 
|10
 +
|MB-SGAGB (UHS-I PRO)
 
|
 
|
|with adapter
+
|miljenko 30 Jan 2014
|Zulucat 6 Jul 2012
 
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|PNY
+
|Samsung
|microSDHC
+
|SDHC
 
|32
 
|32
|10
+
|6
 +
|MB-SSBGBFFP
 
|
 
|
|with AdaFruit adapter
+
|Xerxes 02 Sep 2013
|Wibble 22 Jan 2013
 
 
|-
 
|-
|style='background-color:#c00;'| nok
+
|style='background-color:#0a0;'| ok
|Polaroid
+
|Samsung
 
|SDHC
 
|SDHC
 
|16
 
|16
 
|10
 
|10
|P-SDHC16GB10-EFPOL
+
|MB-SPAGA / MB-SPAGAEU
|mmc0: timeout waiting for hardware interrupt on debian6-19-04-2012
+
|
|Jamesnine 28 Jun 2012
+
|Optim4l 11 May 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|PQI
+
|Samsung
 
|SDHC
 
|SDHC
 +
|32
 +
|10
 +
|MB-SSBGA, MBSSBGVEOBGA-SH
 +
|OK with Debian Wheezy. debian6-19-04-2012: mmc0: timeout waiting for hardware interrupt
 +
|Alkarex 11 Jun 2012
 +
|-
 +
|style='background-color:#0a0;'| ok
 +
|Samsung
 +
|microSDHC
 
|8
 
|8
 
|6
 
|6
 +
|MMAGR08GUDCA-DB
 
|
 
|
|Works with official debian6-19-04-2012
+
|Ewindich 24 Jul 2012
|Remick 12 Jul 2012
 
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|PRETEC
+
|Samsung
|SDHC
+
|microSDHC
|8
+
|16
 
|10
 
|10
|8DK52-122ME
+
|MB-MPAGC (MB-MPAGAEU)
|
+
|man:0x00001b oem:0x534d name:00000 hwrev:0x1 fwrev:0x0
|ScorpAl 19 Jun 2012
+
|Olf 19 Sep 2013
 
|-
 
|-
|style='background-color:#c00;'| nok
+
|style='background-color:#0a0;'| ok
|PRETEC
+
|Samsung
|SDHC
+
|microSDHC
|8
+
|32
 
|10
 
|10
|233x (PC10SDHC08G)
+
|MB-MSBGAEU
|mmc0: timeout waiting for hardware interrupt, Sometimes does not boot, kernel panic
+
|man:0x00001b oem:0x534d name:00000 hwrev:0x1 fwrev:0x0 - works with 2013-12-20-wheezy-raspbian.zip, Kernel 3.10
|Petacz 8 Aug 2012, DarkKnightCZ 23 Jan 2013
+
|Johannes 24 Dec 2013
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|promaster.com
+
|Samsung
|SDHC
+
|microSDHC
|8
+
|64
 
|10
 
|10
|
+
|MB-MGCGBA/AM
|man:0x000027 oem:0x5048 name:SD08G hwrev:0x3 fwrev:0x0
+
|Comes with a SD adapter. Installed 2014-01-07 Raspbian Wheezy, works perfectly!
|Douglas W. Jones Jan 2013
+
|PatriotInAKilt 20 Jan 2014
 
|-
 
|-
 
|style='background-color:#c00;'| nok
 
|style='background-color:#c00;'| nok
|Reekin
+
|SanDisk
 
|SD
 
|SD
|4
+
|2
 
|?
 
|?
 +
|BE0916214253D
 
|
 
|
|doesn't boot
+
|Mate12345 9 Aug 2012
|Nicobsa 11 Jul 2012
 
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Samsung
+
|SanDisk
|SDHC
+
|SD
|4
+
|2
 
|?
 
|?
 
|
 
|
|
+
|Extreme III (BE0715105083B)
|Genocho 26 Apr 2012
+
|Dscott 23 Apr 2012
 +
|-
 +
|style='background-color:#c00;'| nok
 +
|SanDisk
 +
|SD
 +
|2
 +
|?
 +
|Extreme III (BE0722702998D)
 +
|(man:0x000003 oem:0x5344 name:SD02G hwrev:0x8 fwrev:0x0) - tested with Raspbian (build 2012-07-15) and Raspbmc installer (build 2012-07-13)
 +
|Boandlkramer 5 Aug 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Samsung
+
|SanDisk
|SDHC
+
|SD
|4
+
|2
|?
+
|2
|
+
|BE0816113150D
|
+
|writes at 3.5 Mb/s
|Genocho 26 Apr 2012
+
|Elatllat 22 Dec 2011
 
|-
 
|-
|style='background-color:#c00;'| nok
+
|style='background-color:#0a0;'| ok
|Samsung
+
|SanDisk
|SDHC
+
|SD
 +
|2
 
|4
 
|4
|4
+
|Ultra
|MB-SS4G MBSS4GMBDDBA-DD
+
|15 MB/s
|doesn't boot with 2012-07-15-wheezy-raspbian; OK light partially lit
+
|Md84419 24 Sept 2011
|Doctoruseful 19 Aug 2012
 
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Samsung
+
|SanDisk
|SDHC
+
|SD
|8
+
|2
|6
+
|4
|MB-SS8GAEU
+
|Ultra II, BE0719111366D
 
|
 
|
|Dakaix 24 Apr 2012
+
|Md84419 5 Nov 2011, Oostenvr 4 Jul 2012
 
|-
 
|-
|style='background-color:#0a0;'| ok
+
|style='background-color:#c00;'| nok
|Samsung
+
|SanDisk
 
|SDHC
 
|SDHC
|8
+
|2
|10
+
|?
|MB-MP8GA, MB-SP8GA/EU, MB-SP8GA/AM
+
|Ultra II BE0828713280D (15 MB/s)
 
|
 
|
|Garrocha 19 May 2012
+
|Oostenvr 4 Jul 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Samsung
+
|SanDisk
|SDHC
+
|SD
|16
+
|2
 
|6
 
|6
|MB-SSAGAEU
+
|Extreme III (BE0804212046D)
|
+
|20 MB/s
|Dakaix 24 Apr 2012
+
|Nooitaf 20 Jun 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Samsung
+
|SanDisk
|SDHC
+
|SD
|16
+
|2
|6
+
|?
|MB-SSAGB/EU
 
 
|
 
|
|leon.anavi 26 Jun 2013
+
|SanDisk for Wii
 +
|Stevepdp 18 Apr 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Samsung
+
|SanDisk
 
|SDHC
 
|SDHC
|16
+
|4
|10
+
|2
|MB-SGAGB (UHS-I PRO)
+
|BH0820113475D
|
+
|Tested with RPITC (Based on Raspbian Wheezy)
|miljenko 30 Jan 2014
+
|Rendyair 11 Sep 2012
 
|-
 
|-
|style='background-color:#0a0;'| ok
+
|style='background-color:#c00;'| nok
|Samsung
+
|SanDisk
 
|SDHC
 
|SDHC
|32
+
|4
|6
+
|2
|MB-SSBGBFFP
 
 
|
 
|
|Xerxes 02 Sep 2013
+
|Debian and xbmc boot, but fedora gets a lot of mmc0 note long write sync errors and then hc_xfer_timeout errors at the login prompt
 +
|Optim4l 10 May 2012
 
|-
 
|-
|style='background-color:#0a0;'| ok
+
|style='background-color:#c00;'| nok
|Samsung
+
|SanDisk
 
|SDHC
 
|SDHC
|16
+
|4
|10
+
|2
|MB-SPAGA / MB-SPAGAEU
+
|8H825413279G "Limited Edition"
|
+
|Error -110 whilst initialising sd card
|Optim4l 11 May 2012
+
|Jezmck 27 May 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Samsung
+
|SanDisk
 
|SDHC
 
|SDHC
|32
+
|4
|10
+
|4
|MB-SSBGA, MBSSBGVEOBGA-SH
+
|SDSDB-004G-B35, BH1210821913G, SDSDB-004G-BT35
|OK with Debian Wheezy. debian6-19-04-2012: mmc0: timeout waiting for hardware interrupt
 
|Alkarex 11 Jun 2012
 
|-
 
|style='background-color:#0a0;'| ok
 
|Samsung
 
|microSDHC
 
|8
 
|6
 
|MMAGR08GUDCA-DB
 
 
|
 
|
|Ewindich 24 Jul 2012
+
|Md84419 6 May 2012, Nicobsa 11 Jul 2012, Ingestre 12 Jul 2012
 
|-
 
|-
|style='background-color:#0a0;'| ok
+
|style='background-color:#c00;'| nok
|Samsung
+
|SanDisk
|microSDHC
+
|SDHC
|16
+
|4
|10
+
|4
|MB-MPAGC (MB-MPAGAEU)
+
|BH1030216016G, BH1031116016G
|man:0x00001b oem:0x534d name:00000 hwrev:0x1 fwrev:0x0
+
|Doesn't boot
|Olf 19 Sep 2013
+
|SquallStrife 15 May 2012, Vk2amv 9 Jun 2012
|-
 
|style='background-color:#0a0;'| ok
 
|Samsung
 
|microSDHC
 
|32
 
|10
 
|MB-MSBGAEU
 
|man:0x00001b oem:0x534d name:00000 hwrev:0x1 fwrev:0x0 - works with 2013-12-20-wheezy-raspbian.zip, Kernel 3.10
 
|Johannes 24 Dec 2013
 
|-
 
|style='background-color:#0a0;'| ok
 
|Samsung
 
|microSDHC
 
|64
 
|10
 
|MB-MGCGBA/AM
 
|Comes with a SD adapter. Installed 2014-01-07 Raspbian Wheezy, works perfectly!
 
|PatriotInAKilt 20 Jan 2014
 
 
|-
 
|-
 
|style='background-color:#c00;'| nok
 
|style='background-color:#c00;'| nok
 
|SanDisk
 
|SanDisk
|SD
+
|SDHC
|2
+
|4
|?
+
|4
|BE0916214253D
+
|Ultra (BH1028516076D)
|
+
|Intermitant booting ( 1/50 power on ), random timeout messages when it does boot
|Mate12345 9 Aug 2012
+
|Russell 26 Apr 2012
 
|-
 
|-
|style='background-color:#0a0;'| ok
+
|style='background-color:#c00;'| nok
 
|SanDisk
 
|SanDisk
|SD
+
|SDHC
|2
+
|4
|?
+
|4
|
+
|Ultra (SDSDH-004G-U46)
|Extreme III (BE0715105083B)
+
|won`t reboot when it`s hot
|Dscott 23 Apr 2012
+
|Sorinm 17 May 2012
|-
 
|style='background-color:#c00;'| nok
 
|SanDisk
 
|SD
 
|2
 
|?
 
|Extreme III (BE0722702998D)
 
|(man:0x000003 oem:0x5344 name:SD02G hwrev:0x8 fwrev:0x0) - tested with Raspbian (build 2012-07-15) and Raspbmc installer (build 2012-07-13)
 
|Boandlkramer 5 Aug 2012
 
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
 
|SanDisk
 
|SanDisk
|SD
+
|SDHC
|2
+
|4
|2
+
|4
|BE0816113150D
+
|Ultra II
|writes at 3.5 Mb/s
+
|
|Elatllat 22 Dec 2011
+
|Britaniola 22 Apr 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
 
|SanDisk
 
|SanDisk
|SD
+
|SDHC
|2
 
 
|4
 
|4
|Ultra
+
|6
|15 MB/s
+
|Extreme III (30 MB/s)
|Md84419 24 Sept 2011
+
|works with 2012-10-28-wheezy-raspbian
 +
|JeffS 11 Nov 2012
 
|-
 
|-
|style='background-color:#0a0;'| ok
+
|style='background-color:#c00;'| nok
 
|SanDisk
 
|SanDisk
|SD
+
|SDHC
|2
 
 
|4
 
|4
|Ultra II, BE0719111366D
+
|6
 +
|Extreme III C6 (BH0822411730D)
 
|
 
|
|Md84419 5 Nov 2011, Oostenvr 4 Jul 2012
+
|Cmcr651 7 May 2012
 
|-
 
|-
 
|style='background-color:#c00;'| nok
 
|style='background-color:#c00;'| nok
 
|SanDisk
 
|SanDisk
 
|SDHC
 
|SDHC
|2
+
|4
|?
+
|6
|Ultra II BE0828713280D (15 MB/s)
+
|Extreme III (30 MB/s) (BH0822712362G)
 
|
 
|
|Oostenvr 4 Jul 2012
+
|Jezmck 27 May 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
 
|SanDisk
 
|SanDisk
|SD
+
|SDHC
|2
+
|4
 
|6
 
|6
|Extreme III (BE0804212046D)
+
|Ultra SDSDH-004G-U46 - BH1136121837G, BH1130521822D, BH1200421822D (30MB/s)
|20 MB/s
+
|
|Nooitaf 20 Jun 2012
+
|Selsinork 20 Apr 2012 / Alex347 5 May 2012 / Jjuhl 26 May 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
 
|SanDisk
 
|SanDisk
|SD
+
|SDHC
|2
+
|4
|?
+
|10
 +
|Extreme (BH10297143382G)
 
|
 
|
|SanDisk for Wii
+
|Wrdx 19 May 2012
|Stevepdp 18 Apr 2012
 
 
|-
 
|-
|style='background-color:#0a0;'| ok
+
|style='background-color:#c00;'| nok
 
|SanDisk
 
|SanDisk
 
|SDHC
 
|SDHC
 
|4
 
|4
|2
+
|10
|BH0820113475D
+
|Extreme (SDSDX-004G-X46)
|Tested with RPITC (Based on Raspbian Wheezy)
+
|30 MB/s HD Video - Doesn't boot - Works with new kernel.img and start.elf (Paaland), not working with new kernel.img and start.elf 17-06-2012 or "wheezy"-beta (MrF)
|Rendyair 11 Sep 2012
+
|Paaland 21 May 2012, MrF 19 Jun 2012
 
|-
 
|-
|style='background-color:#c00;'| nok
+
|style='background-color:#0a0;'| ok
 
|SanDisk
 
|SanDisk
 
|SDHC
 
|SDHC
 
|4
 
|4
|2
+
|10
|
+
|Extreme (SDSDX-004G-X46)
|Debian and xbmc boot, but fedora gets a lot of mmc0 note long write sync errors and then hc_xfer_timeout errors at the login prompt
+
|Works with RasPlex 0.3.1
|Optim4l 10 May 2012
+
|Bellagio 15 Nov 2013
 
|-
 
|-
|style='background-color:#c00;'| nok
+
|style='background-color:#0a0;'| ok
 
|SanDisk
 
|SanDisk
 
|SDHC
 
|SDHC
 +
|8
 
|4
 
|4
|2
+
|
|8H825413279G "Limited Edition"
+
|writes at ~1.5MB/s
|Error -110 whilst initialising sd card
+
|Ms705 30 Mar 2012
|Jezmck 27 May 2012
 
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
 
|SanDisk
 
|SanDisk
 
|SDHC
 
|SDHC
 +
|8
 
|4
 
|4
|4
+
|Ultra BI1024716014G
|SDSDB-004G-B35, BH1210821913G, SDSDB-004G-BT35
+
|labelled as 15MB/s
|
+
|PhilH 3 Jun 2012
|Md84419 6 May 2012, Nicobsa 11 Jul 2012, Ingestre 12 Jul 2012
 
 
|-
 
|-
|style='background-color:#c00;'| nok
+
|style='background-color:#0a0;'| ok
 
|SanDisk
 
|SanDisk
 
|SDHC
 
|SDHC
 +
|8
 
|4
 
|4
|4
+
|SDSDB-008G-B35S / SDSDB-008G-B35
|BH1030216016G, BH1031116016G
+
|Raspbian “wheezy”: used expand_rootfs option of sudo raspi-config command to make all 8GB available.
|Doesn't boot
+
|Swehner Jan 2013, Baji Feb 2013
|SquallStrife 15 May 2012, Vk2amv 9 Jun 2012
 
 
|-
 
|-
|style='background-color:#c00;'| nok
+
|style='background-color:#0a0;'| ok
 
|SanDisk
 
|SanDisk
 
|SDHC
 
|SDHC
 +
|8
 
|4
 
|4
|4
+
|SDSDB3-008G-A16BJ / BJ's 3-pack
|Ultra (BH1028516076D)
+
|Tested OK with RISC OS
|Intermitant booting ( 1/50 power on ), random timeout messages when it does boot
+
|Lanulos 11 Sep 2013
|Russell 26 Apr 2012
 
 
|-
 
|-
 
|style='background-color:#c00;'| nok
 
|style='background-color:#c00;'| nok
 
|SanDisk
 
|SanDisk
 
|SDHC
 
|SDHC
|4
+
|8
|4
+
|6
|Ultra (SDSDH-004G-U46)
+
|Extreme (BI1101116253G)
|won`t reboot when it`s hot
+
|
|Sorinm 17 May 2012
+
|Alex347 5 May 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
 
|SanDisk
 
|SanDisk
 
|SDHC
 
|SDHC
|4
+
|8
|4
+
|6
|Ultra II
+
|Ultra SDSDH-008G-U46 / BI1131222083D, BI11321422083D (20 MB/s) & SDSDH-008G-T11 (30MB/s) & SDSDH2-008G-AC11
|
+
|SDSDH2-008G-AC11 requires updated Squeeze or Wheezy beta (Jim Manley)
|Britaniola 22 Apr 2012
+
|Dakaix 24 Apr 2012, Crox 23 Jun 2012, Jim Manley 27 Jun 2012
|-
 
|style='background-color:#0a0;'| ok
 
|SanDisk
 
|SDHC
 
|4
 
|6
 
|Extreme III (30 MB/s)
 
|works with 2012-10-28-wheezy-raspbian
 
|JeffS 11 Nov 2012
 
 
|-
 
|-
 
|style='background-color:#c00;'| nok
 
|style='background-color:#c00;'| nok
 
|SanDisk
 
|SanDisk
 
|SDHC
 
|SDHC
|4
+
|8
 
|6
 
|6
|Extreme III C6 (BH0822411730D)
+
|Ultra SDSDH-008G-U46 (BI1201421964G / BI1201221964G / BI1131222083D), SDSRH-008G-A11 & SDSDH-008G-T11 (30 MB/s)
|
+
|Boots kernel but won't run init (mmc timeout waiting for interrupt) debian6-19-04-2012
|Cmcr651 7 May 2012
+
|Trebor27 15 Apr 2012 / Russell 26 Apr 2012 / ChuckHunky 8 May 2012/ Ryantm 10 Jun 2012
 
|-
 
|-
|style='background-color:#c00;'| nok
+
|style='background-color:#0a0;'| ok
 
|SanDisk
 
|SanDisk
 
|SDHC
 
|SDHC
|4
+
|8
|6
+
|10
|Extreme III (30 MB/s) (BH0822712362G)
+
|Extreme (BI11017514367G / BI1130916254G / B11209116254G / SDSDX-008G-X46/BI1218822414G)
|
+
|May need updated bootcode.bin (BELzEBUB), Confirmed on Debian Squeeze 2012-04-19 and Arch Linux 2012-06-13 (Arces), works with Raspian R3 (Histvan)
|Jezmck 27 May 2012
+
|Timer 16 May 2012, BELzEBUB 30 Jun 2012, Arces 9 Jul 2012, Histvan 14 Jul 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
 
|SanDisk
 
|SanDisk
 
|SDHC
 
|SDHC
|4
+
|8
|6
+
|10
|Ultra SDSDH-004G-U46 - BH1136121837G, BH1130521822D, BH1200421822D (30MB/s)
+
|Extreme (SDSDX-008G-X46/BI1111816252D)
|
+
|tested on 2013-02-09 Raspian and Rasplex 0.1.37
|Selsinork 20 Apr 2012 / Alex347 5 May 2012 / Jjuhl 26 May 2012
+
|Jahislove 11 may 2013
 
|-
 
|-
|style='background-color:#0a0;'| ok
+
|style='background-color:#c00;'| nok
 
|SanDisk
 
|SanDisk
 
|SDHC
 
|SDHC
|4
+
|8
 
|10
 
|10
|Extreme (BH10297143382G)
+
|Extreme BI1108716254G, BI110209116254G
 
|
 
|
|Wrdx 19 May 2012
+
|Dscott 23 Apr 2012, Max 31 May 2012
 
|-
 
|-
 
|style='background-color:#c00;'| nok
 
|style='background-color:#c00;'| nok
 
|SanDisk
 
|SanDisk
 
|SDHC
 
|SDHC
|4
+
|8
 
|10
 
|10
|Extreme (SDSDX-004G-X46)
+
|Extreme (BI1200916252D/SDSDX-008G-X46), BI1201416254G
|30 MB/s HD Video - Doesn't boot - Works with new kernel.img and start.elf (Paaland), not working with new kernel.img and start.elf 17-06-2012 or "wheezy"-beta (MrF)
+
|Doesn't work with debian6-19-04-2012.img and with replacement kernel.img and start.elf (Weston). Doesn't work with Debian Wheezy beta (2012-06-18)(Halton). Doesn't work with Arch Linux 13/06/2012 (Madhur)
|Paaland 21 May 2012, MrF 19 Jun 2012
+
|Weston 20 May 2012, Halton 8 Jun 2012, Madhur 27 Jun 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
 
|SanDisk
 
|SanDisk
 
|SDHC
 
|SDHC
|4
+
|8
 
|10
 
|10
|Extreme (SDSDX-004G-X46)
+
|Extreme Pro (SDSDXPA-008G-X46)
|Works with RasPlex 0.3.1
+
|(95MB/s UHS-I) - Works with stock 2012-07-15-wheezy-raspbian
|Bellagio 15 Nov 2013
+
|Incyi 28 Jul 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
Line 2,410: Line 2,371:
 
|SDHC
 
|SDHC
 
|8
 
|8
|4
+
|10
|
+
|Extreme Pro
|writes at ~1.5MB/s
+
|Works with stock Arch Linux 2013-05-01
|Ms705 30 Mar 2012
+
|Perchrh 28 Apr 2012, Tiwipewo 27 May 2012, Perchrh 17 May 2013
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
Line 2,419: Line 2,380:
 
|SDHC
 
|SDHC
 
|8
 
|8
|4
+
|10
|Ultra BI1024716014G
+
|Ultra SDSDU-008G-U46 (30 MB/s)
|labelled as 15MB/s
+
|Works with debian6-19-04-2012 or raspbian images but not with OpenELEC r11212 (MrF). Works with OpenELEC r11493 (Vishnu vijay); works with 2013-09-25-wheezy-raspbian man:0x000003 oem:0x5344 name:SU08G hwrev:0x8 fwrev:0x0 (tswaehn)
|PhilH 3 Jun 2012
+
|MrF 6 Jun 2012, Vishnu vijay 28 Jul 2012, tswaehn 07 dec 2013
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
Line 2,428: Line 2,389:
 
|SDHC
 
|SDHC
 
|8
 
|8
|4
+
|10
|SDSDB-008G-B35S / SDSDB-008G-B35
+
|Ultra SDSDU-008G-A11 (30 MB/s)
|Raspbian “wheezy”: used expand_rootfs option of sudo raspi-config command to make all 8GB available.  
+
|Works with raspbian images (blitzkrieg).
|Swehner Jan 2013, Baji Feb 2013
+
|Blitzkrieg 26 Feb 2013
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
Line 2,437: Line 2,398:
 
|SDHC
 
|SDHC
 
|8
 
|8
|4
+
|10
|SDSDB3-008G-A16BJ / BJ's 3-pack
+
|Ultra SDSDU-008G-T11 (30 MB/s)
|Tested OK with RISC OS
+
|Works with Arch Linux 20130813 (L. Snow).
|Lanulos 11 Sep 2013
+
|L. Snow 27 Dec 2013
 
|-
 
|-
|style='background-color:#c00;'| nok
+
|style='background-color:#0a0;'| ok
 
|SanDisk
 
|SanDisk
 
|SDHC
 
|SDHC
 
|8
 
|8
|6
+
|10
|Extreme (BI1101116253G)
+
|Ultra SDSDU-008G-UQ46 (30 MB/s)
|
+
|Works with Raspbian (wheezy) 3.10.21+ (Read ~18.6MB/s  Write ~14.5MB/s) man:0x000003 oem:0x5344 name:SU08G hwrev:0x8 fwrev:0x0
|Alex347 5 May 2012
+
|Sauce 3 Dec 2013
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
 
|SanDisk
 
|SanDisk
 
|SDHC
 
|SDHC
|8
+
|16
|6
+
|4
|Ultra SDSDH-008G-U46 / BI1131222083D, BI11321422083D (20 MB/s) & SDSDH-008G-T11 (30MB/s) & SDSDH2-008G-AC11
+
|SDSDB-016G-B35
|SDSDH2-008G-AC11 requires updated Squeeze or Wheezy beta (Jim Manley)
+
|
|Dakaix 24 Apr 2012, Crox 23 Jun 2012, Jim Manley 27 Jun 2012
+
|NickstaDB 17 Apr 2012
 
|-
 
|-
|style='background-color:#c00;'| nok
+
|style='background-color:#0a0;'| ok
 
|SanDisk
 
|SanDisk
 
|SDHC
 
|SDHC
|8
+
|16
|6
+
|4
|Ultra SDSDH-008G-U46 (BI1201421964G / BI1201221964G / BI1131222083D), SDSRH-008G-A11 & SDSDH-008G-T11 (30 MB/s)
+
|SDSDB-016G-A11
|Boots kernel but won't run init (mmc timeout waiting for interrupt) debian6-19-04-2012
+
|Tested on OpenELEC, Arch, and NOOBS
|Trebor27 15 Apr 2012 / Russell 26 Apr 2012 / ChuckHunky 8 May 2012/ Ryantm 10 Jun 2012
+
|funkeywoookey 9 Jun 2013
 
|-
 
|-
|style='background-color:#0a0;'| ok
+
|style='background-color:#c00;'| nok
 
|SanDisk
 
|SanDisk
 
|SDHC
 
|SDHC
|8
+
|16
|10
+
|4
|Extreme (BI11017514367G / BI1130916254G / B11209116254G / SDSDX-008G-X46/BI1218822414G)
+
|SDSDB-016G-AFFP
|May need updated bootcode.bin (BELzEBUB), Confirmed on Debian Squeeze 2012-04-19 and Arch Linux 2012-06-13 (Arces), works with Raspian R3 (Histvan)
+
|Attempted with Windows, Linux dd, and Fedora ARM installer. RPi would not load and Linux could not mount after image written to card
|Timer 16 May 2012, BELzEBUB 30 Jun 2012, Arces 9 Jul 2012, Histvan 14 Jul 2012
+
|mwolfgang 19 Mar 2013
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
 
|SanDisk
 
|SanDisk
 
|SDHC
 
|SDHC
|8
+
|16
|10
+
|6
|Extreme (SDSDX-008G-X46/BI1111816252D)
+
|Ultra (30MB/s) (BL1133921933G)
|tested on 2013-02-09 Raspian and Rasplex 0.1.37
+
|Works with OpenELEC r11324
|Jahislove 11 may 2013
+
|Reckoner 17 Jun 2012
 
|-
 
|-
 
|style='background-color:#c00;'| nok
 
|style='background-color:#c00;'| nok
 
|SanDisk
 
|SanDisk
 
|SDHC
 
|SDHC
|8
+
|16
|10
+
|6
|Extreme BI1108716254G, BI110209116254G
+
|Ultra (BL1202021933G)
 
|
 
|
|Dscott 23 Apr 2012, Max 31 May 2012
+
|Dscott 23 Apr 2012
 
|-
 
|-
 
|style='background-color:#c00;'| nok
 
|style='background-color:#c00;'| nok
 
|SanDisk
 
|SanDisk
 
|SDHC
 
|SDHC
|8
+
|16
|10
+
|6
|Extreme (BI1200916252D/SDSDX-008G-X46), BI1201416254G
+
|Ultra I (BL1205921933G)
|Doesn't work with debian6-19-04-2012.img and with replacement kernel.img and start.elf (Weston). Doesn't work with Debian Wheezy beta (2012-06-18)(Halton). Doesn't work with Arch Linux 13/06/2012 (Madhur)
+
|Boots kernel but won't run init (mmc timeout waiting for interrupt)
|Weston 20 May 2012, Halton 8 Jun 2012, Madhur 27 Jun 2012
+
|SnarlingFox 10 May 2012
 
|-
 
|-
|style='background-color:#0a0;'| ok
+
|style='background-color:#c00;'| nok
 
|SanDisk
 
|SanDisk
 
|SDHC
 
|SDHC
|8
+
|16
|10
+
|6
|Extreme Pro (SDSDXPA-008G-X46)
+
|Extreme
|(95MB/s UHS-I) - Works with stock 2012-07-15-wheezy-raspbian
+
|(man:0x000003 oem:0x5344 name:SD16G hwrev:0x8 fwrev:0x0), boots, (mmc0: timeout waiting for hardware interrupt, followed by continuous I/O errors, timeouts, etc), 2013-02-09-wheezy-raspbian
|Incyi 28 Jul 2012
+
|Bernard Ladenthin 12 Mar 2013
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
 
|SanDisk
 
|SanDisk
 
|SDHC
 
|SDHC
|8
+
|16
 
|10
 
|10
|Extreme Pro
+
|Extreme (45MB/s U1)(BL1203322025G), (30MB/s HD Video)(SDSDX3-016G-X46), (45MB/s U1)(BL1203322025G)
|Works with stock Arch Linux 2013-05-01
+
|Doesn't work with debian6-19-04-2012 image, but does work with 2012-06-18-wheezy-beta.img and updated firmware (tested 2012-07-02). Danbowes: Working with latest RaspBMC image (tested 12/09/2012)
|Perchrh 28 Apr 2012, Tiwipewo 27 May 2012, Perchrh 17 May 2013
+
|Flatline403 12 May 2012, Dkleeman 13 Jun 2012, Zbyszek 2 Jul 2012, Danbowes 13 Sep 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
 
|SanDisk
 
|SanDisk
 
|SDHC
 
|SDHC
|8
+
|16
 
|10
 
|10
|Ultra SDSDU-008G-U46 (30 MB/s)
+
|Extreme Pro SDSDXPA-016G-A75 (95MB/s UHS-I)
|Works with debian6-19-04-2012 or raspbian images but not with OpenELEC r11212 (MrF). Works with OpenELEC r11493 (Vishnu vijay); works with 2013-09-25-wheezy-raspbian man:0x000003 oem:0x5344 name:SU08G hwrev:0x8 fwrev:0x0 (tswaehn)
+
|Doesn't work with stock debian6-19-04-2012 image, but does work with freshly compiled kernel
|MrF 6 Jun 2012, Vishnu vijay 28 Jul 2012, tswaehn 07 dec 2013
+
|AXon 26 May 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
 
|SanDisk
 
|SanDisk
 
|SDHC
 
|SDHC
|8
+
|16
 
|10
 
|10
|Ultra SDSDU-008G-A11 (30 MB/s)
+
|Ultra(30MB/s) (SDSDU-016G-U46) (SDSDU-016G-U46S)
|Works with raspbian images (blitzkrieg).
+
|Works with debian6-19-04-2012 (Misox12). Kernel Panic with debian6-19-04-2012. Worked fine with Wheezy image (Casestudies).  Works fine with Raspbian Wheezy 2013-02-09, man:0x000003 oem:0x5344 name:SU16G hwrev:0x8 fwrev:0x0 (Fraoch).  
|Blitzkrieg 26 Feb 2013
+
|Misox12 30 May 2012, Casestudies 30 Jun 2012, Fraoch 25 March 2013
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
 
|SanDisk
 
|SanDisk
|SDHC
+
|microSDHC
|8
+
|16
 
|10
 
|10
|Ultra SDSDU-008G-T11 (30 MB/s)
+
|Ultra microSDHC I UHS-I
|Works with Arch Linux 20130813 (L. Snow).
+
|man:0x000003 oem:0x5344 name:SU16G hwrev:0x8 fwrev:0x0. Works again since raspberrypi-firmware 20130116 in archlinux-arm. write 6.8 MB/s, read 21.0 MB/s
|L. Snow 27 Dec 2013
+
|fiodschi, 19 Jan 2013
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
 
|SanDisk
 
|SanDisk
 
|SDHC
 
|SDHC
|8
+
|16
 
|10
 
|10
|Ultra SDSDU-008G-UQ46 (30 MB/s)
+
|EXTREME SDHC UHS-I (SDSDX-016G-X46)
|Works with Raspbian (wheezy) 3.10.21+ (Read ~18.6MB/s  Write ~14.5MB/s) man:0x000003 oem:0x5344 name:SU08G hwrev:0x8 fwrev:0x0
+
|Works with Raspbian “wheezy” and works with OpenELEC
|Sauce 3 Dec 2013
+
|Fazdogg 08 Jan 2013; Shadyeglenn 14 Feb 2013
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
 
|SanDisk
 
|SanDisk
 
|SDHC
 
|SDHC
|16
+
|32
 
|4
 
|4
|SDSDB-016G-B35
 
 
|
 
|
|NickstaDB 17 Apr 2012
+
|
 +
|Daviewales 30 May 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
 
|SanDisk
 
|SanDisk
 
|SDHC
 
|SDHC
|16
+
|32
|4
+
|6
|SDSDB-016G-A11
+
|
|Tested on OpenELEC, Arch, and NOOBS
+
|
|funkeywoookey 9 Jun 2013
+
|Helpme1986 22 Apr 2012
 
|-
 
|-
|style='background-color:#c00;'| nok
+
|style='background-color:#0a0;'| ok
 
|SanDisk
 
|SanDisk
 
|SDHC
 
|SDHC
|16
+
|32
|4
+
|10
|SDSDB-016G-AFFP
+
|Extreme (45MB/s UHS-I) (SDSDX-032G-X46)
|Attempted with Windows, Linux dd, and Fedora ARM installer. RPi would not load and Linux could not mount after image written to card
+
|works with arch-04-29-image and latest firmware (booting problems without firmware update) / works with debian wheezy kernel 3.2.27+ (jLo)
|mwolfgang 19 Mar 2013
+
|Malhelo 8 Jun 2012 / jLo 2 Jan 2013
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
 
|SanDisk
 
|SanDisk
 
|SDHC
 
|SDHC
|16
+
|32
|6
+
|10
|Ultra (30MB/s) (BL1133921933G)
+
|Ultra (30 MB/s)
|Works with OpenELEC r11324
+
|Works with debian6-19-04-2012
|Reckoner 17 Jun 2012
+
Works with 2014-01-07-wheezy-raspbian
 +
|Pnppl 11 Jun 2012
 +
Sheegoth on 12 Feb 2014
 
|-
 
|-
|style='background-color:#c00;'| nok
+
|style='background-color:#0a0;'| ok
 
|SanDisk
 
|SanDisk
 
|SDHC
 
|SDHC
|16
+
|32
|6
+
|10
|Ultra (BL1202021933G)
+
|Elevate (30 MB/s) SDSDU-032G-T11
|
+
|Works with 2012-12-16-wheezy-raspbian
|Dscott 23 Apr 2012
+
|bderry71 08 Jan 2013
 
|-
 
|-
|style='background-color:#c00;'| nok
+
|style='background-color:#0a0;'| ok
 
|SanDisk
 
|SanDisk
|SDHC
+
|SDXC
|16
+
|64
|6
+
|10
|Ultra I (BL1205921933G)
+
|Extreme (SDSDX-064G-X46)
|Boots kernel but won't run init (mmc timeout waiting for interrupt)
+
|45 MB/s UHS-I: works with 2012-07-15-wheezy-raspbian
|SnarlingFox 10 May 2012
+
|Cracki 10 Aug 2012
|-
 
|style='background-color:#c00;'| nok
 
|SanDisk
 
|SDHC
 
|16
 
|6
 
|Extreme
 
|(man:0x000003 oem:0x5344 name:SD16G hwrev:0x8 fwrev:0x0), boots, (mmc0: timeout waiting for hardware interrupt, followed by continuous I/O errors, timeouts, etc), 2013-02-09-wheezy-raspbian
 
|Bernard Ladenthin 12 Mar 2013
 
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
 
|SanDisk
 
|SanDisk
|SDHC
+
|SDXC
|16
+
|64
 
|10
 
|10
|Extreme (45MB/s U1)(BL1203322025G), (30MB/s HD Video)(SDSDX3-016G-X46), (45MB/s U1)(BL1203322025G)
+
|Ultra SDXC UHS-I FFP (3A114807)
|Doesn't work with debian6-19-04-2012 image, but does work with 2012-06-18-wheezy-beta.img and updated firmware (tested 2012-07-02). Danbowes: Working with latest RaspBMC image (tested 12/09/2012)
+
|
|Flatline403 12 May 2012, Dkleeman 13 Jun 2012, Zbyszek 2 Jul 2012, Danbowes 13 Sep 2012
+
|Zagblorg 26 Jul 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
 
|SanDisk
 
|SanDisk
|SDHC
+
|microSDHC
|16
+
|4
|10
+
|2
|Extreme Pro SDSDXPA-016G-A75 (95MB/s UHS-I)
+
|
|Doesn't work with stock debian6-19-04-2012 image, but does work with freshly compiled kernel
+
|with SanDisk microSD to SD adapter
|AXon 26 May 2012
+
|Rew 24 Apr 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
 
|SanDisk
 
|SanDisk
|SDHC
+
|microSDHC
|16
+
|4
|10
+
|4
|Ultra(30MB/s) (SDSDU-016G-U46) (SDSDU-016G-U46S)
+
|
|Works with debian6-19-04-2012 (Misox12). Kernel Panic with debian6-19-04-2012. Worked fine with Wheezy image (Casestudies).  Works fine with Raspbian Wheezy 2013-02-09, man:0x000003 oem:0x5344 name:SU16G hwrev:0x8 fwrev:0x0 (Fraoch).
+
|with SanDisk microSD to SD adapter
|Misox12 30 May 2012, Casestudies 30 Jun 2012, Fraoch 25 March 2013
+
|Sleepy 1 May 2012
 
|-
 
|-
|style='background-color:#0a0;'| ok
+
|style='background-color:#c00;'| nok
 
|SanDisk
 
|SanDisk
 
|microSDHC
 
|microSDHC
|16
+
|4
|10
+
|6
|Ultra microSDHC I UHS-I
+
|Mobile Ultra
|man:0x000003 oem:0x5344 name:SU16G hwrev:0x8 fwrev:0x0. Works again since raspberrypi-firmware 20130116 in archlinux-arm. write 6.8 MB/s, read 21.0 MB/s
+
|Boots kernel but won't run init (mmc timeout waiting for interrupt) - Jens Pedersen / (tried 15-06-2012 with kernel 19-04-2012) error -84 transferring data, kernel panic: no init found - Wieltje
|fiodschi, 19 Jan 2013
+
|Jens Pedersen 8 May 2012, Wieltje 15 Jun 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
 
|SanDisk
 
|SanDisk
|SDHC
+
|microSDHC
|16
+
|8
|10
+
|2
|EXTREME SDHC UHS-I (SDSDX-016G-X46)
 
|Works with Raspbian “wheezy” and works with OpenELEC
 
|Fazdogg 08 Jan 2013; Shadyeglenn 14 Feb 2013
 
|-
 
|style='background-color:#0a0;'| ok
 
|SanDisk
 
|SDHC
 
|32
 
|4
 
 
|
 
|
 
|
 
|
|Daviewales 30 May 2012
+
|Fjen 12 May 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
 
|SanDisk
 
|SanDisk
|SDHC
+
|microSDHC
|32
+
|8
|6
+
|4
 
|
 
|
|
+
|with SanDisk microSD to SD adapter
|Helpme1986 22 Apr 2012
+
|Md84419 21 Apr 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
 
|SanDisk
 
|SanDisk
|SDHC
+
|microSDHC
|32
+
|8
|10
+
|4
|Extreme (45MB/s UHS-I) (SDSDX-032G-X46)
+
|SDSDQM-008G-B35
|works with arch-04-29-image and latest firmware (booting problems without firmware update) / works with debian wheezy kernel 3.2.27+ (jLo)
+
|man:0x000003 oem:0x5344 name:SU08G hwrev:0x8 fwrev:0x0
|Malhelo 8 Jun 2012 / jLo 2 Jan 2013
+
|jonasbits 12 Sept 2013
 
|-
 
|-
|style='background-color:#0a0;'| ok
+
|style='background-color:#c00;'| nok
 
|SanDisk
 
|SanDisk
|SDHC
+
|microSDHC
|32
+
|8
|10
+
|6
|Ultra (30 MB/s)
+
|Mobile Ultra (SDSDQY-008G-U46A)
|Works with debian6-19-04-2012
+
|working with the latest firmware, won`t reboot when it`s hot
Works with 2014-01-07-wheezy-raspbian
+
|Sorinm 17 May 2012
|Pnppl 11 Jun 2012
 
Sheegoth on 12 Feb 2014
 
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
 
|SanDisk
 
|SanDisk
|SDHC
+
|microSDHC
|32
+
|8
 
|10
 
|10
|Elevate (30 MB/s) SDSDU-032G-T11
+
|Ultra (SDSDQU-008G-U46) 30 MB/s
|Works with 2012-12-16-wheezy-raspbian
+
|tested and working on Raspbian wheezy (and RaspBMC)
|bderry71 08 Jan 2013
+
|Pepindur 11 Sep 2012
 
|-
 
|-
|style='background-color:#0a0;'| ok
+
|style='background-color:#c00;'| ok
 
|SanDisk
 
|SanDisk
|SDXC
+
|microSDHC
|64
+
|16
|10
+
|4
|Extreme (SDSDX-064G-X46)
+
|
|45 MB/s UHS-I: works with 2012-07-15-wheezy-raspbian
+
|(man:0x000003 oem:0x5344 name:SU16G hwrev:0x8 fwrev:0x0), with microSD to SD adapter, boots, (mmc0: timeout waiting for hardware interrupt, followed by continuous I/O errors, timeouts, etc), 2013-02-09-wheezy-raspbian
|Cracki 10 Aug 2012
+
|Bernard Ladenthin 12 Mar 2013
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
 
|SanDisk
 
|SanDisk
|SDXC
+
|microSDHC
|64
+
|16
 
|10
 
|10
|Ultra SDXC UHS-I FFP (3A114807)
+
|Mobile Ultra (SDSDQUA-016G-U46A)
|
+
|working with the latest firmware
|Zagblorg 26 Jul 2012
+
|Mengineer 25 Aug 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
 
|SanDisk
 
|SanDisk
 
|microSDHC
 
|microSDHC
 +
|32
 
|4
 
|4
|2
 
 
|
 
|
|with SanDisk microSD to SD adapter
+
|
|Rew 24 Apr 2012
+
|Sherman 19 Jul 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
 
|SanDisk
 
|SanDisk
 
|microSDHC
 
|microSDHC
|4
+
|32
|4
+
|10
|
+
|SDSDQU-032G-U46A
|with SanDisk microSD to SD adapter
+
|archlinux-hf-2013-02-11
|Sleepy 1 May 2012
+
|pAIgn10 6 Jun 2013
 
|-
 
|-
|style='background-color:#c00;'| nok
+
|style='background-color:#0a0;'| ok
 
|SanDisk
 
|SanDisk
|microSDHC
+
|microSDXC
|4
+
|64
 
|6
 
|6
|Mobile Ultra
+
|SDSDQY-064G-A11A
|Boots kernel but won't run init (mmc timeout waiting for interrupt) - Jens Pedersen / (tried 15-06-2012 with kernel 19-04-2012) error -84 transferring data, kernel panic: no init found - Wieltje
+
|boots up much more consistently with latest firmware
|Jens Pedersen 8 May 2012, Wieltje 15 Jun 2012
+
|LastSilmaril 23 May 2012
 
|-
 
|-
|style='background-color:#0a0;'| ok
+
|style='background-color:#c00;'| nok
 
|SanDisk
 
|SanDisk
|microSDHC
+
|miniSDHC
|8
 
 
|2
 
|2
 
|
 
|
|
+
|Ultra II miniSD. BE07107FJE
|Fjen 12 May 2012
+
|Doesn't boot
 +
|Pe7er 18 Mar 2013
 
|-
 
|-
|style='background-color:#0a0;'| ok
+
|style='background-color:#c00;'| nok
 
|SanDisk
 
|SanDisk
|microSDHC
+
|SDXC
|8
+
|128
|4
+
|10
|
+
|Extrem 45MB/s
|with SanDisk microSD to SD adapter
+
|Don't work (Tested on Two)
|Md84419 21 Apr 2012
+
|OTHMAN 2014 02 10
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|SanDisk
+
|SCT
|microSDHC
+
|SDXC
 +
|64
 +
|10
 +
|STC SM649A-130125
 +
|2013-02-09-wheezy-raspbian.img, booted cleanly, installed LibreOffice OK
 +
|Lanulos 29 Mar 2013
 +
|-
 +
|style='background-color:#0a0;'| ok
 +
|Silicon Power
 +
|SDHC
 
|8
 
|8
|4
+
|10
|SDSDQM-008G-B35
+
|SP008GBSDH010V10
|man:0x000003 oem:0x5344 name:SU08G hwrev:0x8 fwrev:0x0
+
|Works fine 2012-12-16-wheezy-raspbian.img - Tested 14/01/2013
|jonasbits 12 Sept 2013
+
|Thenix 14 Jan 2013
 
|-
 
|-
 
|style='background-color:#c00;'| nok
 
|style='background-color:#c00;'| nok
|SanDisk
+
|Silicon Power
|microSDHC
+
|SDHC
 
|8
 
|8
 +
|10
 +
|SP008GBSDH010V10
 +
|Boots kernel but won't run init (mmc timeout waiting for interrupt ) - Tested 20/11/2012, 2012-10-28-wheezy-raspbian.img with Nov 20 kernel
 +
|Xthexder 21 Nov 2012
 +
|-
 +
|style='background-color:#0a0;'| ok
 +
|Silicon Power
 +
|SDHC
 +
|16
 
|6
 
|6
|Mobile Ultra (SDSDQY-008G-U46A)
+
|SP016GBSDH006V10
|working with the latest firmware, won`t reboot when it`s hot
+
|
|Sorinm 17 May 2012
+
|Valery 05 Apr 2013
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|SanDisk
+
|Silicon Power
|microSDHC
+
|SDHC
|8
+
|16
 
|10
 
|10
|Ultra (SDSDQU-008G-U46) 30 MB/s
+
|SP016GBSDH010V10
|tested and working on Raspbian wheezy (and RaspBMC)
+
|
|Pepindur 11 Sep 2012
+
|Xthexder 21 Nov 2012
 +
|-
 +
|style='background-color:#c00;'| nok
 +
|Silicon Power
 +
|SDHC
 +
|32
 +
|6
 +
|LS2N732GQON03ASP
 +
|boots debian6-19-04-2012.img, but frequent slow response / system hangs
 +
|Michthom 21 Jun 2012
 
|-
 
|-
|style='background-color:#c00;'| ok
+
|style='background-color:#0a0;'| ok
|SanDisk
+
|Silicon Power
 
|microSDHC
 
|microSDHC
|16
 
 
|4
 
|4
 +
|6
 +
|SP004GBSTH006V10-SP
 
|
 
|
|(man:0x000003 oem:0x5344 name:SU16G hwrev:0x8 fwrev:0x0), with microSD to SD adapter, boots, (mmc0: timeout waiting for hardware interrupt, followed by continuous I/O errors, timeouts, etc), 2013-02-09-wheezy-raspbian
+
|Csgabe 19 May 2012
|Bernard Ladenthin 12 Mar 2013
 
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|SanDisk
+
|Silicon Power
 
|microSDHC
 
|microSDHC
|16
+
|8
 
|10
 
|10
|Mobile Ultra (SDSDQUA-016G-U46A)
+
|S608G1202
|working with the latest firmware
+
|
|Mengineer 25 Aug 2012
+
|Blutme 17 Aug 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|SanDisk
+
|Silicon Power
 
|microSDHC
 
|microSDHC
|32
+
|16
 +
|10
 +
|SP016GBSDH010V10
 +
|
 +
|Jamesnine 10 Jun 2012
 +
|-
 +
|style='background-color:#0a0;'| ok
 +
|Sony
 +
|SDHC
 +
|4
 
|4
 
|4
|
+
|SF-4B4, SF-4N4
|
+
|(Write 6MB/s, Read 20MB/s)
|Sherman 19 Jul 2012
+
|Krischaplin 7 May 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|SanDisk
+
|Sony
|microSDHC
+
|SDHC
|32
+
|4
 
|10
 
|10
|SDSDQU-032G-U46A
+
|UHS-1 40MB/s SF-4UY man:0x000027 oem:0x5048 name:SD04G hwrev:0x3 fwrev:0x0
|archlinux-hf-2013-02-11
+
|Perfect with Raspbian. With openELEC I get warnings in the logs (mmc0: DMA IRQ 6 ignored - results were reset - mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignoring it) (Write 10,3MB/s, Read 18,8MB/s)
|pAIgn10 6 Jun 2013
+
|Knopfler19 20 Jun 2013
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|SanDisk
+
|Sony
|microSDXC
+
|SDHC
|64
+
|8
|6
+
|4
|SDSDQY-064G-A11A
 
|boots up much more consistently with latest firmware
 
|LastSilmaril 23 May 2012
 
|-
 
|style='background-color:#c00;'| nok
 
|SanDisk
 
|miniSDHC
 
|2
 
 
|
 
|
|Ultra II miniSD. BE07107FJE
+
|(Write 11.8MB/s, Read 17.4MB/s)
|Doesn't boot
+
|Slabua 9 Aug 2012
|Pe7er 18 Mar 2013
 
|-
 
|style='background-color:#c00;'| nok
 
|SanDisk
 
|SDXC
 
|128
 
|10
 
|Extrem 45MB/s
 
|Don't work (Tested on Two)
 
|OTHMAN 2014 02 10
 
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|SCT
+
|Sony
|SDXC
+
|SDHC
|64
+
|8
 
|10
 
|10
|STC SM649A-130125
+
|UHS-1 SF8UX
|2013-02-09-wheezy-raspbian.img, booted cleanly, installed LibreOffice OK
+
|Write 17.2 MB/s, Read 20.8 MB/s, Raspbian works while image copied using windows
|Lanulos 29 Mar 2013
+
|Regi24 29 Dec 2012, Hariram April 12, 2013, Hareesh G S June 6, 2013 (Openelec Image)
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Silicon Power
+
|Sony
 
|SDHC
 
|SDHC
 
|8
 
|8
 
|10
 
|10
|SP008GBSDH010V10
+
|UHS-1 90MB/s SF-8UX man:0x000082 oem:0x4a54 name:NCard hwrev:0x0 fwrev:0x0
|Works fine 2012-12-16-wheezy-raspbian.img - Tested 14/01/2013
+
|Perfect with Raspbian. With openELEC I get warnings in the logs (mmc0: DMA IRQ 6 ignored - results were reset - mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignoring it) (Write 16,9 MB/s, Read 21,1 MB/s)
|Thenix 14 Jan 2013
+
|Knopfler19 20 Jun 2013
 
|-
 
|-
|style='background-color:#c00;'| nok
+
|style='background-color:#0a0;'| ok
|Silicon Power
+
|Sony
 
|SDHC
 
|SDHC
 
|8
 
|8
 
|10
 
|10
|SP008GBSDH010V10
+
|UHS-I SF-8UY/TQ1 man:0x000082 oem:0x4a54 name:NCard hwrev:0x0 fwrev:0x2
|Boots kernel but won't run init (mmc timeout waiting for interrupt ) - Tested 20/11/2012, 2012-10-28-wheezy-raspbian.img with Nov 20 kernel
+
|Works fine with Raspbian. (Write 13.37 MB/s, Read 20.93 MB/s)
|Xthexder 21 Nov 2012
+
|c5jirzex52xx, 18 Nov 2013
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Silicon Power
+
|Sony
 
|SDHC
 
|SDHC
 
|16
 
|16
|6
+
|10
|SP016GBSDH006V10
+
|UHS-1
|
+
|Works well with Raspian.
|Valery 05 Apr 2013
+
|Bafeigum 23 Aug 2013
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Silicon Power
+
|Sony
 
|SDHC
 
|SDHC
|16
+
|32
 
|10
 
|10
|SP016GBSDH010V10
+
|SF-32NX/TQ
|
+
|Max read speed of ~94 MB/s, min write speed of ~10 MB/s) - Works with archlinuxarm-29-04-2012 dd image with latest firmware update (as of 10-06-2012)
|Xthexder 21 Nov 2012
+
|Chbg 13 Jun 2012
 
|-
 
|-
|style='background-color:#c00;'| nok
+
|style='background-color:#0a0;'| ok
|Silicon Power
+
|Sony
 
|SDHC
 
|SDHC
 
|32
 
|32
|6
+
|10
|LS2N732GQON03ASP
+
|SF-32UY/TQ1, SF-32UY/TQMN (40 MB/s)
|boots debian6-19-04-2012.img, but frequent slow response / system hangs
+
|Works with archlinux-hf-2013-02-11 (also after full update) - as of 04-08-2013)
|Michthom 21 Jun 2012
+
|Tigran 09 April 2013
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Silicon Power
+
|Sony
|microSDHC
+
|SDHC
|4
+
|32
|6
+
|10
|SP004GBSTH006V10-SP
+
|SF-32UY/TQ1, UHS-I (40 MB/s)
|
+
|Works with Raspbmc, OpenELEC (Frodo and Gotham test builds), and NOOBS.
|Csgabe 19 May 2012
+
Tested throughput:
 +
Seq Read: 87.2MB/sec
 +
Seq Write: 20.4MB/sec
 +
Random Read: 78.3MB/sec
 +
Random Write: 19.9MB/sec
 +
|JoeSchmuck 13 July 2013
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Silicon Power
+
|Strontium
|microSDHC
+
|SDHC
 
|8
 
|8
 
|10
 
|10
|S608G1202
+
|SD-T08G 1045 US6923 G (White Shell - SKU 8 886450 703492)
 
|
 
|
|Blutme 17 Aug 2012
+
|Ssb 25 Jul 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Silicon Power
+
|Super Talent
|microSDHC
+
|SDHC
|16
+
|32
 
|10
 
|10
|SP016GBSDH010V10
+
|SDHC32-C10 SKU: 116-557-001
|
+
|works with Raspbmc RC4 and 2012-07-15-wheezy-raspbian
|Jamesnine 10 Jun 2012
+
|Drroller 14 Aug 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Sony
+
|TakeMS
|SDHC
+
|microSDHC
 
|4
 
|4
 
|4
 
|4
|SF-4B4, SF-4N4
+
|
|(Write 6MB/s, Read 20MB/s)
+
|with TakeMS adapter
|Krischaplin 7 May 2012
+
|Delboy0 31 May 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Sony
+
|TakeMS
|SDHC
+
|SDXC
|4
+
|64
 
|10
 
|10
|UHS-1 40MB/s SF-4UY man:0x000027 oem:0x5048 name:SD04G hwrev:0x3 fwrev:0x0
+
|
|Perfect with Raspbian. With openELEC I get warnings in the logs (mmc0: DMA IRQ 6 ignored - results were reset - mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignoring it) (Write 10,3MB/s, Read 18,8MB/s)
+
|overclock turbo model B works
|Knopfler19 20 Jun 2013
+
|select 02 June 2013
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Sony
+
|TDK
 
|SDHC
 
|SDHC
|8
 
 
|4
 
|4
 +
|4
 +
|1008WW5261B
 
|
 
|
|(Write 11.8MB/s, Read 17.4MB/s)
+
|Pluggster 17 May 2012
|Slabua 9 Aug 2012
 
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Sony
+
|TDK
 
|SDHC
 
|SDHC
|8
+
|2 x 4
|10
+
|4
|UHS-1 SF8UX
+
|80-56-10275-004G
|Write 17.2 MB/s, Read 20.8 MB/s, Raspbian works while image copied using windows
+
|Debian works, mmc0 errors when booting Fedora
|Regi24 29 Dec 2012, Hariram April 12, 2013, Hareesh G S June 6, 2013 (Openelec Image)
+
|Melikescheese 27 May 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Sony
+
|TDK
 
|SDHC
 
|SDHC
|8
+
|4
|10
+
|6
|UHS-1 90MB/s SF-8UX man:0x000082 oem:0x4a54 name:NCard hwrev:0x0 fwrev:0x0
+
|S404G1113
|Perfect with Raspbian. With openELEC I get warnings in the logs (mmc0: DMA IRQ 6 ignored - results were reset - mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignoring it) (Write 16,9 MB/s, Read 21,1 MB/s)
+
|Works with Debian Wheezy (2012-06-18 beta)
|Knopfler19 20 Jun 2013
+
|Dcuk 26 Jun 2012
 
|-
 
|-
|style='background-color:#0a0;'| ok
+
|style='background-color:#c00;'| nok
|Sony
+
|TDK
 
|SDHC
 
|SDHC
|8
+
|4
|10
+
|6
|UHS-I SF-8UY/TQ1 man:0x000082 oem:0x4a54 name:NCard hwrev:0x0 fwrev:0x2
+
|S404G1041, S404G1046
|Works fine with Raspbian. (Write 13.37 MB/s, Read 20.93 MB/s)
+
|end May 2012, new kernel.img and start.elf, won't run init. 4 Jun 2012, debian6-19-04-2012.img, replacement kernel.img and start.elf from github. Got Error -84 and Kernel panic - not syncing: No init found
|c5jirzex52xx, 18 Nov 2013
+
|Ceptimus 2 Jun 2012, Norbini 4 Jun 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Sony
+
|TDK
|SDHC
+
|microSDHC
|16
+
|4
|10
+
|4
|UHS-1
+
|with Adapter (80-56-10301-004G)
|Works well with Raspian.
+
|
|Bafeigum 23 Aug 2013
+
|Norbini 4 Jun 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Sony
+
|TDK
|SDHC
+
|microSDHC
|32
+
|8
 
|10
 
|10
|SF-32NX/TQ
+
|
|Max read speed of ~94 MB/s, min write speed of ~10 MB/s) - Works with archlinuxarm-29-04-2012 dd image with latest firmware update (as of 10-06-2012)
+
|Works with Raspbian 2012-07-15
|Chbg 13 Jun 2012
+
|Backeby 20 Jul 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Sony
+
|TOPRAM
 
|SDHC
 
|SDHC
|32
+
|8
|10
+
|6
|SF-32UY/TQ1, SF-32UY/TQMN (40 MB/s)
+
|TRSD8GC6
|Works with archlinux-hf-2013-02-11 (also after full update) - as of 04-08-2013)
+
|Works with OpenELEC (Frodo and Gotham test builds), did not test on anything else yet.
|Tigran 09 April 2013
+
Tested throughput:
 +
Seq Read: 43.9MB/sec
 +
 
 +
Seq Write: 18.8MB/sec
 +
Random Read: 41.8MB/sec
 +
Random Write: 17.6MB/sec
 +
|JoeSchmuck 13 July 2013
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Sony
+
|Toshiba
 
|SDHC
 
|SDHC
|32
+
|4
|10
+
|4
|SF-32UY/TQ1, UHS-I (40 MB/s)
+
|SD-K04G(1201 W12338 N) (labelled as Fujifilm SHDC 4GB class 4)
|Works with Raspbmc, OpenELEC (Frodo and Gotham test builds), and NOOBS.
+
|Tested with Raspbian 2013-11-18. Speed is 5MB/s write (1GB file)
Tested throughput:
+
|captaindangeax 18 nov 2013
Seq Read: 87.2MB/sec
 
Seq Write: 20.4MB/sec
 
Random Read: 78.3MB/sec
 
Random Write: 19.9MB/sec
 
|JoeSchmuck 13 July 2013
 
 
|-
 
|-
 +
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Strontium
+
|Toshiba
 
|SDHC
 
|SDHC
 
|8
 
|8
|10
+
|4
|SD-T08G 1045 US6923 G (White Shell - SKU 8 886450 703492)
+
|SD-K08G(1223 W17218 P)
|
+
|Tested with Raspbian 2012-12-16. Speed is 4MB/s write
|Ssb 25 Jul 2012
+
|rendyair 16 Jan 2013
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Super Talent
+
|Toshiba
 
|SDHC
 
|SDHC
|32
+
|16
 
|10
 
|10
|SDHC32-C10 SKU: 116-557-001
+
|SD-T16G(1046 US7022 C)
|works with Raspbmc RC4 and 2012-07-15-wheezy-raspbian
+
|
|Drroller 14 Aug 2012
+
|Yang 5 Sep 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|TakeMS
+
|Toshiba
 
|microSDHC
 
|microSDHC
|4
+
|8
|4
+
|?
|
+
|SD-C08GJ(BL3A)
|with TakeMS adapter
+
|with adapter
|Delboy0 31 May 2012
+
|Jannis 15 May 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|TakeMS
+
|Toshiba
|SDXC
+
|SDHC
|64
+
|32
 
|10
 
|10
|
+
|SD-K032GR7AR30 (30MB/s)
|overclock turbo model B works
+
|Works with NOOBS.
|select 02 June 2013
+
|OTHMAN 2014.02.14
 
|-
 
|-
|style='background-color:#0a0;'| ok
+
|style='background-color:#c00;'| nok
|TDK
+
|Transcend
 +
|SD
 +
|2
 +
|?
 +
|6451AG 2G O2DS1
 +
|
 +
|MaWe 13 Aug 2012
 +
|-
 +
|style='background-color:#0a0;'| ok
 +
|Transcend
 
|SDHC
 
|SDHC
 
|4
 
|4
 
|4
 
|4
|1008WW5261B
+
|TS4GSDHC4 - BH1130821915G
|
+
| we've found these to work without any errors and offer reasonable performance
|Pluggster 17 May 2012
+
|RasMyra 12 Apr 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|TDK
+
|Transcend
 
|SDHC
 
|SDHC
|2 x 4
 
 
|4
 
|4
|80-56-10275-004G
+
|6
|Debian works, mmc0 errors when booting Fedora
+
|TS4GSDHC6
|Melikescheese 27 May 2012
+
|no problems (does not work with Raspbmc as of 1 Jun 2012 - 321liftoff)
 +
|LakesGeek 23 Apr 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|TDK
+
|Transcend
 
|SDHC
 
|SDHC
 
|4
 
|4
|6
+
|10
|S404G1113
+
|TS4GSDHC10
|Works with Debian Wheezy (2012-06-18 beta)
+
|Works fine running Raspbian and OpenELEC. Tested various cards from different batches.
|Dcuk 26 Jun 2012
+
|Kiwisol 27 Oct 2013
 
|-
 
|-
 
|style='background-color:#c00;'| nok
 
|style='background-color:#c00;'| nok
|TDK
+
|Transcend
 
|SDHC
 
|SDHC
 
|4
 
|4
|6
+
|10
|S404G1041, S404G1046
+
|TS4GSDHC10E, TS4GSDHC10
|end May 2012, new kernel.img and start.elf, won't run init. 4 Jun 2012, debian6-19-04-2012.img, replacement kernel.img and start.elf from github. Got Error -84 and Kernel panic - not syncing: No init found
+
|Corrupted when card image back up made
|Ceptimus 2 Jun 2012, Norbini 4 Jun 2012
+
mmc0: resetting ongoing cmd 25dma before 4096/4096 [1]/[1] complete
 +
mmc0: Timeout waiting for hardware interrupt - cmd12
 +
mmcblk0: error -110 sending stop comment, original cmd response 0x900, card status 0xe00
 +
|Mfg 3 Jun 2012, Thenix 14 Jan 2013, Fazz 04 Oct 2013
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|TDK
+
|Transcend
 
|microSDHC
 
|microSDHC
|4
+
|8
|4
+
|10
|with Adapter (80-56-10301-004G)
+
|TS8GUSDHC10
 
|
 
|
|Norbini 4 Jun 2012
+
| Za Bullet 18 May 2013
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|TDK
+
|Transcend
|microSDHC
+
|SDHC
 
|8
 
|8
 
|10
 
|10
|
+
|TS8GSDHC10E
|Works with Raspbian 2012-07-15
+
|man:0x00001b oem:0x534d name:00000 hwrev:0x1 fwrev:0x0
|Backeby 20 Jul 2012
+
| jmarin 22 April 2013
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|TOPRAM
+
|Transcend
 
|SDHC
 
|SDHC
 
|8
 
|8
|6
+
|4
|TRSD8GC6
+
|TS8GSDHC4
|Works with OpenELEC (Frodo and Gotham test builds), did not test on anything else yet.
+
|(man:0x000003 oem:0x5344 name:SD08G hwrev:0x8 fwrev:0x0) - works with both Debian "squeezy" and Raspbian "wheezy" distributions (Hedj)
Tested throughput:
+
|Attila.afra 25 Apr 2012, Hedj 24 Jul 2012
Seq Read: 43.9MB/sec
 
 
 
Seq Write: 18.8MB/sec
 
Random Read: 41.8MB/sec
 
Random Write: 17.6MB/sec
 
|JoeSchmuck 13 July 2013
 
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Toshiba
+
|Transcend
 
|SDHC
 
|SDHC
|4
+
|8
|4
+
|6
|SD-K04G(1201 W12338 N) (labelled as Fujifilm SHDC 4GB class 4)
+
|TS8GSDHC6-P2 - MMBFG08GWACA-M6
|Tested with Raspbian 2013-11-18. Speed is 5MB/s write (1GB file)
+
|~5.8 MB/s read/write following the Performance below
|captaindangeax 18 nov 2013
+
|Md84419 5 Nov 2011
 
|-
 
|-
 
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Toshiba
+
|Transcend
 
|SDHC
 
|SDHC
 
|8
 
|8
|4
+
|10
|SD-K08G(1223 W17218 P)
+
|TS8GSDHC10
|Tested with Raspbian 2012-12-16. Speed is 4MB/s write
+
|
|rendyair 16 Jan 2013
+
|Selsinork 26 Apr 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Toshiba
+
|Transcend
 
|SDHC
 
|SDHC
|16
+
|8
 
|10
 
|10
|SD-T16G(1046 US7022 C)
+
|TS8GSDU1 UHC-I X300
|
+
|Arch read/write 20,9/13,1 MB/s
|Yang 5 Sep 2012
+
|30 Aug 2013
|-
+
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Toshiba
+
|Transcend
|microSDHC
+
|SDHC
 
|8
 
|8
|?
+
|10
|SD-C08GJ(BL3A)
+
|TS8GSDHC10U1 UHC-I X600
|with adapter
+
|Arch read/write 21,1/15 MB/s
|Jannis 15 May 2012
+
|30 Aug 2013
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Toshiba
+
|Transcend
 
|SDHC
 
|SDHC
|32
+
|16
|10
+
|4
|SD-K032GR7AR30 (30MB/s)
+
|TS16GSDHC4
|Works with NOOBS.
+
|Tested with Raspbian 2014-12-30
|OTHMAN 2014.02.14
+
|Fmondada 2 Jan 2014
 
|-
 
|-
|style='background-color:#c00;'| nok
 
|Transcend
 
|SD
 
|2
 
|?
 
|6451AG 2G O2DS1
 
|
 
|MaWe 13 Aug 2012
 
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
 
|Transcend
 
|Transcend
 
|SDHC
 
|SDHC
|4
+
|16
|4
+
|6
|TS4GSDHC4 - BH1130821915G
+
|TS16GSDHC6
| we've found these to work without any errors and offer reasonable performance
+
|
|RasMyra 12 Apr 2012
+
|Bullace 18 May 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
 
|Transcend
 
|Transcend
 
|SDHC
 
|SDHC
|4
+
|16
|6
+
|10
|TS4GSDHC6
+
|TS16GSDHC10 / TS16GSDHC10E
|no problems (does not work with Raspbmc as of 1 Jun 2012 - 321liftoff)
+
|
|LakesGeek 23 Apr 2012
+
|Rew 18 Apr 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
 
|Transcend
 
|Transcend
 
|SDHC
 
|SDHC
|4
+
|16
 
|10
 
|10
|TS4GSDHC10
+
|TS16GSDHC10 / TS16GSDHC10E
|Works fine running Raspbian and OpenELEC. Tested various cards from different batches.
+
| Read:18.4 MB/s Write:12.1 MB/s (man:0x000074 oem:0x4a45 name:SDC  hwrev:0x0 fwrev:0x2)
|Kiwisol 27 Oct 2013
+
|Sam2 01 Feb 2014
 
|-
 
|-
|style='background-color:#c00;'| nok
+
|style='background-color:#0a0;'| ok
 
|Transcend
 
|Transcend
 
|SDHC
 
|SDHC
|4
+
|16
 
|10
 
|10
|TS4GSDHC10E, TS4GSDHC10
+
|TS16GSDU1
|Corrupted when card image back up made
+
| Read:18.4 MB/s Write:12.1 MB/s, (man:0x000074 oem:0x4a45 name:SDU1  hwrev:0x0 fwrev:0x2)
mmc0: resetting ongoing cmd 25dma before 4096/4096 [1]/[1] complete
+
|Sam2 01 Feb 2014
mmc0: Timeout waiting for hardware interrupt - cmd12
 
mmcblk0: error -110 sending stop comment, original cmd response 0x900, card status 0xe00
 
|Mfg 3 Jun 2012, Thenix 14 Jan 2013, Fazz 04 Oct 2013
 
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
 
|Transcend
 
|Transcend
|microSDHC
+
|SDHC
|8
+
|16
 
|10
 
|10
|TS8GUSDHC10
+
|TS16GSDHC10 9173BA-16G-09DS2
|
+
| works
| Za Bullet 18 May 2013
+
|Epa 20130304. package had "83-3432 V5.1" behind it.
 
|-
 
|-
|style='background-color:#0a0;'| ok
+
|style='background-color:#c00;'| nok
 
|Transcend
 
|Transcend
 
|SDHC
 
|SDHC
|8
+
|16
 
|10
 
|10
|TS8GSDHC10E
+
|TS16GSDHC10U1
|man:0x00001b oem:0x534d name:00000 hwrev:0x1 fwrev:0x0
+
|Doesn't Boot, show that "kernel panic - not syncing attempted to kill init"
| jmarin 22 April 2013
+
|Khfung02 13 Sep 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
 
|Transcend
 
|Transcend
 
|SDHC
 
|SDHC
|8
+
|16
|4
+
|10 UHS-1
|TS8GSDHC4
+
|TS16GSDHC10U1
|(man:0x000003 oem:0x5344 name:SD08G hwrev:0x8 fwrev:0x0) - works with both Debian "squeezy" and Raspbian "wheezy" distributions (Hedj)
+
|Works with Occidentals 0.2 from Adafruit, read and write about 15 MB/s, didn't test other versions.
|Attila.afra 25 Apr 2012, Hedj 24 Jul 2012
+
|aevh 18 Feb 2013
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
 
|Transcend
 
|Transcend
 
|SDHC
 
|SDHC
|8
+
|32
|6
+
|10
|TS8GSDHC6-P2 - MMBFG08GWACA-M6
+
|TS32GSDHC10, TS32GSDHC10E
|~5.8 MB/s read/write following the Performance below
+
|
|Md84419 5 Nov 2011
+
|Vakya 29 May 2012
 +
|-
 +
|style='background-color:#c00;'| nok
 +
|Transcend
 +
|microSDHC
 +
|2
 +
|?
 +
|MMAGR02GUECA-MB
 +
|reads fine initially after image was written on a PC, gives mmc0 timeout errors reading back data after writing a large amount (in this case with 'pacman -Syu'). Still seems to work, but is *very* slow after this happens, even across reboots
 +
|Malvineous 16 Jun 2012
 
|-
 
|-
|style='background-color:#0a0;'| ok
+
|style='background-color:#c00;'| nok
 
|Transcend
 
|Transcend
|SDHC
+
|microSDHC
|8
+
|32
|10
+
|?
|TS8GSDHC10
+
|TS32GUSDHC4
|
+
|Doesn't boot
|Selsinork 26 Apr 2012
+
|Piponazo 7 Aug 2012
 
|-
 
|-
|style='background-color:#0a0;'| ok
+
|style='background-color:#c00;'| nok
 
|Transcend
 
|Transcend
|SDHC
+
|microSDHC
|8
+
|32
 
|10
 
|10
|TS8GSDU1 UHC-I X300
+
|TS32GUSDHC10
|Arch read/write 20,9/13,1 MB/s
+
|(man:0x00001b oem:0x534d name:00000 hwrev:0x1 fwrev:0x0), with microSD to SD adapter, boots, (mmc0: timeout waiting for hardware interrupt, followed by continuous I/O errors, timeouts, etc), 2013-02-09-wheezy-raspbian
|30 Aug 2013
+
|Bernard Ladenthin 12 Mar 2013
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
 
|Transcend
 
|Transcend
|SDHC
+
|microSDHC
|8
+
|32
 
|10
 
|10
|TS8GSDHC10U1 UHC-I X600
+
|TS32GUSDU1
|Arch read/write 21,1/15 MB/s
+
|Works with 2013-02-09-wheezy-raspbian
|30 Aug 2013
+
|Neurolit 15 Apr 2013
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
 
|Transcend
 
|Transcend
|SDHC
+
|SDXC
|16
+
|64
|4
+
|10
|TS16GSDHC4
+
|TS64GSDXC10
|Tested with Raspbian 2014-12-30
+
|
|Fmondada 2 Jan 2014
+
|Country 26 Jun 2012
|-
 
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Transcend
+
|Traveller
 
|SDHC
 
|SDHC
|16
+
|4
|6
+
|?
|TS16GSDHC6
+
|High Speed
|
+
|Works with raspbian
|Bullace 18 May 2012
+
|Sega dude 28 Jul 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Transcend
+
|V-Gen
 +
|microSDHC
 +
|8
 +
|?
 +
|
 +
|No problems.(man:0x000073 oem:0x4247 name:NCard hwrev:0x1 fwrev:0x0). Tested with Raspbian Wheezy & Raspbmc
 +
|Rendyair 11 Sep 2012
 +
|-
 +
|style='background-color:#c00;'| nok
 +
|Veho
 
|SDHC
 
|SDHC
|16
+
|4
|10
+
|6
|TS16GSDHC10 / TS16GSDHC10E
+
|
 
|
 
|
|Rew 18 Apr 2012
+
|Spaaa 5 Jun 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Transcend
+
|Veho
 
|SDHC
 
|SDHC
|16
+
|8
|10
+
|6
|TS16GSDHC10 / TS16GSDHC10E
+
|Ultra fast
| Read:18.4 MB/s Write:12.1 MB/s (man:0x000074 oem:0x4a45 name:SDC  hwrev:0x0 fwrev:0x2)
+
|(man:0x00001b oem:0x534d name:00000 hwrev:0x1 fwrev:0x0) 7.8Mb/s. Slow but tested with Arch Linux
|Sam2 01 Feb 2014
+
|Johnlane 28 Jul 2012
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
|Transcend
+
|Verbatim
 
|SDHC
 
|SDHC
|16
+
|8
 
|10
 
|10
|TS16GSDU1
+
|43961
| Read:18.4 MB/s Write:12.1 MB/s, (man:0x000074 oem:0x4a45 name:SDU1  hwrev:0x0 fwrev:0x2)
+
|
|Sam2 01 Feb 2014
+
|Petacz 13 Aug 2012
|-
 
|style='background-color:#0a0;'| ok
 
|Transcend
 
|SDHC
 
|16
 
|10
 
|TS16GSDHC10 9173BA-16G-09DS2
 
| works
 
|Epa 20130304. package had "83-3432 V5.1" behind it.
 
|-
 
|style='background-color:#c00;'| nok
 
|Transcend
 
|SDHC
 
|16
 
|10
 
|TS16GSDHC10U1
 
|Doesn't Boot, show that "kernel panic - not syncing attempted to kill init"
 
|Khfung02 13 Sep 2012
 
|-
 
|style='background-color:#0a0;'| ok
 
|Transcend
 
|SDHC
 
|16
 
|10 UHS-1
 
|TS16GSDHC10U1
 
|Works with Occidentals 0.2 from Adafruit, read and write about 15 MB/s, didn't test other versions.
 
|aevh 18 Feb 2013
 
|-
 
|style='background-color:#0a0;'| ok
 
|Transcend
 
|SDHC
 
|32
 
|10
 
|TS32GSDHC10, TS32GSDHC10E
 
|
 
|Vakya 29 May 2012
 
|-
 
|style='background-color:#c00;'| nok
 
|Transcend
 
|microSDHC
 
|2
 
|?
 
|MMAGR02GUECA-MB
 
|reads fine initially after image was written on a PC, gives mmc0 timeout errors reading back data after writing a large amount (in this case with 'pacman -Syu').  Still seems to work, but is *very* slow after this happens, even across reboots
 
|Malvineous 16 Jun 2012
 
|-
 
|style='background-color:#c00;'| nok
 
|Transcend
 
|microSDHC
 
|32
 
|?
 
|TS32GUSDHC4
 
|Doesn't boot
 
|Piponazo 7 Aug 2012
 
|-
 
|style='background-color:#c00;'| nok
 
|Transcend
 
|microSDHC
 
|32
 
|10
 
|TS32GUSDHC10
 
|(man:0x00001b oem:0x534d name:00000 hwrev:0x1 fwrev:0x0), with microSD to SD adapter, boots, (mmc0: timeout waiting for hardware interrupt, followed by continuous I/O errors, timeouts, etc), 2013-02-09-wheezy-raspbian
 
|Bernard Ladenthin 12 Mar 2013
 
|-
 
|style='background-color:#0a0;'| ok
 
|Transcend
 
|microSDHC
 
|32
 
|10
 
|TS32GUSDU1
 
|Works with 2013-02-09-wheezy-raspbian
 
|Neurolit 15 Apr 2013
 
|-
 
|style='background-color:#0a0;'| ok
 
|Transcend
 
|SDXC
 
|64
 
|10
 
|TS64GSDXC10
 
|
 
|Country 26 Jun 2012
 
|-
 
|style='background-color:#0a0;'| ok
 
|Traveller
 
|SDHC
 
|4
 
|?
 
|High Speed
 
|Works with raspbian
 
|Sega dude 28 Jul 2012
 
|-
 
|style='background-color:#0a0;'| ok
 
|V-Gen
 
|microSDHC
 
|8
 
|?
 
|
 
|No problems.(man:0x000073 oem:0x4247 name:NCard hwrev:0x1 fwrev:0x0). Tested with Raspbian Wheezy & Raspbmc
 
|Rendyair 11 Sep 2012
 
|-
 
|style='background-color:#c00;'| nok
 
|Veho
 
|SDHC
 
|4
 
|6
 
|
 
|
 
|Spaaa 5 Jun 2012
 
|-
 
|style='background-color:#0a0;'| ok
 
|Veho
 
|SDHC
 
|8
 
|6
 
|Ultra fast
 
|(man:0x00001b oem:0x534d name:00000 hwrev:0x1 fwrev:0x0) 7.8Mb/s. Slow but tested with Arch Linux
 
|Johnlane 28 Jul 2012
 
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
Line 3,473: Line 3,335:
 
|8
 
|8
 
|10
 
|10
|43961
+
|Premium
|
+
|Tested with 2013-02-09 release of Raspbian Wheezy and Rasplex 0.1.37 - blue plastic version
|Petacz 13 Aug 2012
+
|Jahislove 11 may 2013
 
|-
 
|-
 
|style='background-color:#0a0;'| ok
 
|style='background-color:#0a0;'| ok
Line 3,481: Line 3,343:
 
|SDHC
 
|SDHC
 
|8
 
|8
|10
+
|6
 
|Premium
 
|Premium
|Tested with 2013-02-09 release of Raspbian Wheezy and Rasplex 0.1.37 - blue plastic version
+
|Tested with 2014-02-17 release of Raspbian Wheezy
|Jahislove 11 may 2013
+
|talbots 17 feburary 2013
 
|-
 
|-
 
|style='background-color:#c00;'| nok
 
|style='background-color:#c00;'| nok

Revision as of 20:00, 17 February 2014

SD cards

The SD card is a key part of the Raspberry Pi; it provides the initial storage for the Operating System and files. Storage can be extended through many types of USB connected peripherals.

When the Raspberry Pi is 'switched on', i.e. connected to a power supply, a special piece of code called the bootloader is executed, which reads more special code from the SD card that is used to start up the Raspberry Pi. If there is no SD card inserted, it will not start. Do NOT push in or pull out an SD card while the Raspberry Pi is connected to the power, as this is likely to corrupt the SD card data (you might get away with it, but it is best not to).

The SD card must be formatted, or written to, in a special way that means the Raspberry Pi can read the data it needs to start properly. If you are new to this check the instructions, or buy a pre-formatted SD card.

One advantage to using an SD card like this is that you can have several SD cards, each with a different operating system, or a different purpose. Simply power off, switch cards, and reconnect the power. You have a different computer to play with.

Which SD card?

SD card sizes

SD cards come in three physical sizes (see picture). The Raspberry Pi needs the largest one. The miniSD card and the MicroSD card can be used in a Raspberry Pi, but you will need an adapter / holder to fit it.

SD cards come in a range of storage sizes. You will likely need more than 2 GB.

There are other properties of SD cards that are not covered here. Read the Wikipedia article for those details.

Other SD card content

See the following links for other information:

  • Troubleshooting== Preinstalled SD cards ==You might like to consider buying a preinstalled card; a wide range of branded SD cards preinstalled with operating systems are available. If you don't buy a preinstalled card, you will have to create one yourself. Check the SD Card setup page to help you make this decision. That page also shows where these cards can be bought from.==Verification==Users have listed working and non-working cards here. The SD Card Association suggests there are more than 400 brands across dozens of product categories and more than 8,000 models. These are just a few.=== Is this reliable? ===Unfortunately there is little scope for analysis of the failures given below. There are several reasons why a card may not work. You will notice that the same card may be shown as working and not working; the model numbers on cards do seem to be confusing.* the firmware / bootloader on early Raspberry Pi boards had a problem with Class 10 high speed cards. This has been fixed.* the drivers in some Linux distributions have been improved since the initial release* the Raspberry Pi can suffer from performance problems if peripherals are drawing too much power from the power supply; one of the consequences is errors from the SD card* unless using a preinstalled card, users have to copy a distribution image to the SD card. This might be considered more technical than the user has previously experienced, resulting in a faulty SD card* there are many cheap Chinese copies of (brand name) SD-Cards on the market, in addition they are often mislabelled as having greater capacity than they really have, see SanDisk counterfeit cards... and of course, they may be faulty!=== Technical Information ===Note that manufacturers change their designs over time, even as the specs stay the same. (E.g. an ACME 8 GB class 4 card manufactured in 2011 might work, while one manufactured in 2012 might not.)For this reason, please specify product numbers in the lists below, when possible.You can also attach the following fields from your card's CID:
    cd /sys/class/mmc_host/mmc?/mmc?:*echo "man:$(cat manfid) oem:$(cat oemid) name:$(cat name) hwrev:$(cat hwrev) fwrev:$(cat fwrev)"
    === Working / Non-working SD cards ===The table can be sorted using the triangles in the top row. Please add entries in the correct location, so that the initial sort is by Manufacturer, Type, Size and Class. Keep separate entries for working and non-working. Put your user name and date in the final column, so people can judge if the problem is still likely to occur.{| class="wikitable sortable"! OK !! Manufacturer  !! Type !! Size (GB) !! Class !! Model !! Info !! Logged by|-|style='background-color:#0a0;'| ok|7DAYSHOP.CzOM|SDHC|8|10||man:0x000027 oem:0x5048 name:SD08G hwrev:0x3 fwrev:0x0|Ap 3 Jul 2012|-|style='background-color:#c00;'| nok|Acumem|SDHC|8|6||many errors on 7 Jun 2012|S0rce 8 Jun 2012|-|style='background-color:#c00;'| nok|Adata|SDHC|2|?|Speedy (MMAGF02GWMCA -NA)||Oostenvr 4 Jul 2012|-|style='background-color:#0a0;'| ok|Adata|SDHC|2|2|Speedy 8B0947||Stevhorn 14 Aug 2012|-|style='background-color:#0a0;'| ok|Adata|SDHC|4|4|ASDH4GCL4-R|Possibly a bit slow. Stiff to pull out of the PI.|James.C 24 Apr 2013|-|style='background-color:#0a0;'| ok|Adata|SDHC|4|4|BH1109416141G||Blutme 17 Aug 2012|-|style='background-color:#0a0;'| ok|Adata|SDHC|8|2|MMB3F08GWMCA-GE||Timishier 10 Jun 2012|-|style='background-color:#0a0;'| ok|Adata|SDHC|8|6|MMAGR08GUDCA-DB|sometimes boots (Dattaway)|Florz 26 May 2012, Dattaway 13 Jun 2012|-|style='background-color:#0a0;'| ok|Adata|SDHC|8|10|AUSDH8GCL10-R, P-SDH8G10-EC, ASDH8GCL10-R||Elatllat 22 Dec 2011, Madcow42 18 Jul 2012, Thenix 14 Jan 2013|-|style='background-color:#0a0;'| ok|Adata|SDHC|16|6||man:0x00001d oem:0x4144 name:SD hwrev:0x1 fwrev:0x0|Semtex 21 May 2012, Jettis 5 Sep 2013|-|style='background-color:#c00;'| nok|Adata|SDHC|16|6|SD5MY168G0|won't boot|Nijntje 18 May 2012|-|style='background-color:#0a0;'| ok|Adata|SDHC|16|10|16GSDHC10, ASDH16GUICL10-R||Captainralf 6 Jun 2012, honza801 7 Jan 2013, CopperHead4750 28 Jan 2014

|- |style='background-color:#0a0;'| ok |Adata |SDHC |32 |10 |AUSDH32GCL10-R | |Tom3f 13 Jul 2012 |- |style='background-color:#0a0;'| ok |Adata |microSDHC |8 |4 | |MicroSD w/ adapter |0xAF 12 Jun 2012 |- |style='background-color:#0a0;'| ok |Adata |microSDHC |8 |10 | |MicroSD w/ adapter |johnniepop 15 Apr 2013 |- |style='background-color:#0a0;'| ok |Adata |microSDHC |16 |10 |AUSDH16GCL10-RA1 |with adapter |Frank26080115 1 Jul 2012 |- |style='background-color:#0a0;'| ok |Adata |microSDHC |32 |10 |AUSDH32GCL10-RA1 |2013-05-25-wheezy-raspbian |pAIgn10 6 Jun 2013 |- |style='background-color:#c00;'| nok |Adata |microSDHC |64 |10 | |with adapter |rolgiati 2 May 2013 |- |style='background-color:#c00;'| nok |Agfa |microSDHC |16 |6 | |with adapter ENAAJK121960 |MaWe 13 Aug 2012 |- |style='background-color:#c00;'| nok |AmazonBasics |SDHC |4 |10 |B004Q3R9AQ |We have had a 50% failure rate on these with file system corruption, even with write protection enabled, with Raspian |pgardella 27 June 2013 |- |style='background-color:#0a0;'| ok |AmazonBasics |SDHC |8 |10 |B0058GH0LS | |Reid 7 Jun 2012 |- |style='background-color:#0a0;'| ok |AmazonBasics |SDHC |16 |10 |B0058GH1IK |Tested 24 Jun 2012 no errors found |M3ch4 26 Jun 2012 |- |style='background-color:#c00;'| nok |AmazonBasics |SDHC |16 |10 | |many errors on 7 Jun 2012 |S0rce 8 Jun 2012 |- |style='background-color:#0a0;'| ok |AmazonBasics |SDHC |32 |10 | | |Lrosengreen 16 Aug 2012 |- |style='background-color:#0a0;'| ok |Apacer |SDHC |8 |6 | | |Hamish 13 Aug 2012 |- |style='background-color:#c00;'| nok |Apacer |SDHC |16 |10 |AP16GSDHC10 |Does not boot / io error from dmesg with os running from usb. |Jettis 5 Sep 2013 |- |style='background-color:#0a0;'| ok |Apacer |microSDHC |8 |10 | |with adapter |Jasen 8 Jun 2012 |- |style='background-color:#0a0;'| ok |Centon |SDHC |4 |10 |4GBSDHC10 | |Dick Jones, 24 Sept 2013 |- |style='background-color:#0a0;'| ok |Centon |SDHC |16 |4 |1447 | |Uberfoo 23 Jul 2012 |- |style='background-color:#0a0;'| ok |CnMemory |SDHC |8 |4 |84209_8GB_SDHC (Silver/Black label says 'High Capacity Card') Maplins |operation is much slower than with a SanDisk 4GB Class 4 card |Ceptimus 2 Jun 2012 |- |style='background-color:#0a0;'| ok |CnMemory |microSDHC |8 |10 |86071 |man:0x00001b oem:0x534d name:00000 hwrev:0x1 fwrev:0x0. write 10.4 MB/s, read 20.1 MB/s |fiodschi, 19 Jan 2013 |- |style='background-color:#0a0;'| ok |CoreMicro |microSDHC |8 |4 |CMMICROSDCL4/8GB |man:0x000082 oem:0x4a54 name:NCard hwrev:0x1 fwrev:0x0 |Dick Jones, 4 Dec 2013 |- |style='background-color:#c00;'| nok |Dane-Elec |SDHC |4 |4 |DA-SD-4096-R |Error -110 whilst initialising sd card |captbrando, 04 Mar 2013 |- |style='background-color:#0a0;'| ok |Dane-Elec |SDHC |16 |4 | | |Elatllat 22 Dec 2011 |- |style='background-color:#0a0;'| ok |Dane-Elec |SDHC |16 |10 |Pro 200X DEMS16GB2683ENBA | |Ivazquez 15 Aug 2012 |- |style='background-color:#c00;'| nok |Delkin |SDHC |4 |6 |Delkin pro |works with Fedora Beefy Miracle 17 |Gersh 7 Jun 2012 |- |style='background-color:#0a0;'| ok |Dick Smith |SDHC |4 |4 |XG4958 | |James.C 14 Apr 2013 |- |style='background-color:#0a0;'| ok |Dick Smith |SDHC |8 |4 |XG4959 |This 8GB DSE SD (S608G1137) works fine on latest Raspbian as at Dec 2013 |Sauce 3 Dec 2013 |- |style='background-color:#0a0;'| ok |Dikom |SDHC |16 |10 |207H3MD016IBSD | |Churchill 1 Jun 2012 |- |style='background-color:#0a0;'| ok |Duracell |SDHC |4 |4 | | |Semtex 21 May 2012 |- |style='background-color:#0a0;'| ok |Duracell |SDHC |16 |10 |Pro Photo 200x | |Semtex 21 May 2012 |- |style='background-color:#0a0;'| ok |Duracell |SDHC |32 |10 | |man:0x00001d oem:0x4144 name:SD hwrev:0x1 fwrev:0x0 (~4.6MB/s read, ~4.4MB/s write on debian6-19-04-2012) |Bedevere 5 Jul 2012 |- |style='background-color:#0a0;'| ok |Emtec |SD |2 |? | |man:0x000027 oem:0x5048 name:SD02G hwrev:0x2 fwrev:0x0 |Incyi 7 Jul 2012 |- |style='background-color:#0a0;'| ok |Emtec |SDHC |4 |4 |EKMSD4G60XHCN | |Korban 18 Aug 2012 |- |style='background-color:#0a0;'| ok |Emtec |SDHC |8 |10 |EKMSD8G150XHC |~17 MB/s read / ~14 MB/s write in 'dd' (man:0x000003 oem:0x5344 name:SMI hwrev:0x1 fwrev:0x0) |NC 10 Feb 2013 |- |style='background-color:#c00;'| nok |Emtec |SDHC |8 |10 |EKMSD8G150XHC |Both Raspmc and OpenElec tries to boot, but throws lots of errors |vygandas 12 June 2013 |- |style='background-color:#0a0;'| ok |Emtec |SD |16 |10 |EKMSD16G150XHC |less than half as fast as Sandisk 16gb Class 10 |Declension 8 Aug 2012 |- |style='background-color:#0a0;'| ok |Extrememory |SDHC |16 |10 | |man:0x000012 oem:0x3456 name:F0F0F hwrev:0x1 fwrev:0x0 |Fjen 10 May 2012 |- |style='background-color:#c00;'| nok |Extrememory |SDHC |32 |10 |Marked "Hyperformance" | |MathieuMD 29 Oct 2013 |- |style='background-color:#0a0;'| ok |Extrememory |SDHC |32 |10 | |man:0x000003 oem:0x5344 name:SMI hwrev:0x1 fwrev:0x0 |Mfg 3 Jun 2012 |- |style='background-color:#0a0;'| ok |Fuji |SDHC |32 |10 |P10NM00580A |(man:0x000073 oem:0x4247 name:NCard hwrev:0x1 fwrev:0x0) |Crashmeplease 28 Jul 2012 |- |style='background-color:#0a0;'| ok |Fujifilm |SDHC |8 |4 |P10N079840A | |Paul 26 Aug 2013 |- |style='background-color:#c00;'| nok |GSkill |SDHC |32 |10 | | |Flatline403 12 May 2012 |- |style='background-color:#0a0;'| ok |GSkill |SDHC |16 |10 |FF-TSDG16GA-C10 | |GKontadakis & Jim Kastrinakis (the toxic duet of IT) 31 Aug 2013 |- |style='background-color:#0a0;'| ok |Goodram |microSDHC |8 |4 | | |Chmurli 9 Jun 2012 |- |style='background-color:#0a0;'| ok |Goodram |microSDHC |16 |4 |SDU16GHCAGRR10 | |Mojca 22 Jun 2012 |- |style='background-color:#0a0;'| ok |Goodram |microSDHC |16 |10 | | |Druss 5 Aug 2012 |- |style='background-color:#0a0;'| ok |Hama |SDHC |2 |2 | | |Mikerr 5 Jul 2012 |- |style='background-color:#0a0;'| ok |Hama |SDHC |8 |6 |High Speed Pro | |Bubblebobble 17 May 2012 |- |style='background-color:#0a0;'| ok |Hema (Dutch dept. store) |SDHC |4 |? | | |Frankivo 25 Jun 2012 |- |style='background-color:#0a0;'| ok |Hema (Dutch dept. store) |SDHC |8 |4 | | |Hjongste 12 Jun 2012 |- |style='background-color:#0a0;'| ok |HIDISC |SDHC |8 |10 |HDPSDH8GC10 |man:0x000027 oem:0x5048 name:SD08G hwrev:0x3 fwrev:0x0 |Nkt00125 06 Aug 2013 |- |style='background-color:#0a0;'| ok |HP |SDHC |8 |4 | |doesn't reboot during first time startup process, but restart again and fine after that |Semtex 21 May 2012 |- |style='background-color:#0a0;'| ok |HP |SDHC |32 |10 | | |Harkin 28 Jun 2012 |- |style='background-color:#0a0;'| ok |ICIDU |SDHC |4 |10 | | |CurlyMo 1 Aug 2012 |- |style='background-color:#0a0;'| ok |ICIDU |microSDHC |8 |10 | | |Wieltje 13 Jun 2012 |- |style='background-color:#0a0;'| ok |ICIDU |SDHC |16 |10 | |image write had issues, might be my inexperience. It boots & shows Xserver |BjornW 26 May 2012 |- |style='background-color:#0a0;'| ok |ICIDU |microSDHC |16 |10 | |(20 MB/sec) |Alphons 2 Aug 2012 |- |style='background-color:#0a0;'| ok |ICIDU |microSDHC |32 |10 | |(20 MB/sec) |Alphons 2 Aug 2012 |- |style='background-color:#c00;'| nok |Imation |SDHC |32 |10 |S732G1232 |mmc0: controller never released inhibit bit(s) followed by many and various mmc0: timeout errors |ChrisGreen 28 Jan 2013 |- |style='background-color:#c00;'| nok |Integral |SDHC |8 |10 |Ultima Pro 20MB/s SD-K08G - 1245-WJ1479L |Gets too hot and wont boot. |mpmc 22 May 2013 |- |style='background-color:#0a0;'| ok |Integral |SDHC |8 |10 |Ultima Pro 20MB/s SD-K08G - 1238-W19718L |Works fine. |mpmc 22 May 2013 |- |style='background-color:#0a0;'| ok |Integral |SDHC |4 |4 |SD-K04G (purple label), SD-M04G | |Dmd 27 Aug 2012 |- |style='background-color:#c00;'| nok |Integral |SDHC |4 |4 |S404G1115 | |Pluggster 16 May 2012 |- |style='background-color:#0a0;'| ok |Integral |SDHC |4 |10 |Ultima Pro | |Ace 26 May 2012 |- |style='background-color:#0a0;'| ok |Integral |SDHC |8 |6 |Ultima Pro |initial error -110 but boots within 5 seconds with no further errors or issues |Bubblebobble 17 May 2012mmc0: controller never released inhibit bit(s) and

mmc0: timeout |- |style='background-color:#0a0;'| ok |Integral |SDHC |8 |10 |Ultima Pro (20 MB/s) |works: initial error -110 but boots within 5 seconds with no further errors or issues |Auldy 10 Jun 2012 |- |style='background-color:#0a0;'| ok |Integral |SDHC |16 |6 |Ultima Pro | |Zagblorg 26 Jul 2012 |- |style='background-color:#c00;'| nok |Integral |SDHC |16 |6 |Ultima Pro (SH016GAA2BB) | |Jmg123 23 Apr 2012 |- |style='background-color:#0a0;'| ok |Integral |SDHC |16 |10 |Ultima Pro |20 MB/s |Tomgco 17 Apr 2012 |- |style='background-color:#0a0;'| ok |Integral |SDHC |32 |10 | | |FLX 2 Jul 2012 |- |style='background-color:#0a0;'| ok |Integral |SDHC |32 |10 |Ultima Pro (20 MB/s) | |Ab30021190 30 Aug 2012 |- |style='background-color:#0a0;'| ok |Integral |microSDHC |8 |4 | |Tested with Raspbian 2013-12-20, with the included microSD adapter. |Plof 1 January 2014 |- |style='background-color:#0a0;'| ok |(Intenso) |SDHC |16 |4 | | |johnniepop 15 Apr 2013 |- |style='background-color:#0a0;'| ok |(Intenso) |SDHC |16 |10 | |man:0x000082 oem:0x4a54 name:NCard hwrev:0x0 fwrev:0x2 OpenELEC 3.10.20 write 8.0MB/s read 10.6MB/s |Cosbug 28 Dec 2013 |- |style='background-color:#0a0;'| ok |Joyflash |SDHC |16 |10 |LTSD1112016GB | |Vk2amv 8 Jun 2012 |- |style='background-color:#0a0;'| ok |Kingmax |SDHC |4 |2 | | |Sorinm 17 May 2012 |- |style='background-color:#c00;'| nok |Kingmax |microSDHC |4 |4 |KM04GMCSDHC4 |won`t reboot when it`s hot |Sorinm 17 May 2012 |- |style='background-color:#c00;'| nok |Kingmax |microSDHC |8 |4 |KM08GMCSDHC41A |won't reboot when it's hot |Slabua 2 Aug 2012 |- |style='background-color:#0a0;'| ok |Kingston |SD |2 | |KING-SD-M02G-BULK |(0xAF 12 Jun 2012) boots the kernel, but damages the filesystem |Md84419 5 Nov 2011, 0xAF 12 Jun 2012 |- |style='background-color:#0a0;'| ok |Kingston |SDHC |4 |4 |SD4/4GB | |Rew 18 Apr 2012 |- |style='background-color:#0a0;'| ok |Kingston |SDHC |4 |4 |SD4/4GB SD-K04G | |James.C 20 Apr 2013 |- |style='background-color:#c00;'| nok |Kingston |SDHC |4 |4 |SD4/4GB SD-K04G |(man:0x000003 oem:0x5344 name:SD16G hwrev:0x8 fwrev:0x0), boots, (mmc0: timeout waiting for hardware interrupt, followed by continuous I/O errors, timeouts, etc), 2013-02-09-wheezy-raspbian |Bernard Ladenthin 12 Mar 2013 |- |style='background-color:#c00;'| nok |Kingston |SDHC |4 |6 | |Boots kernel but won't run init (times out). (works fine - Malvineous) |RoSha 10 May 2012, Malvineous 17 Jun 2012 |- |style='background-color:#0a0;'| ok |Kingston |SDHC |4 |10 |SD10V/4GB | |Luismreis 2 Oct 2012 |- |style='background-color:#0a0;'| ok |Kingston |SDHC |8 |4 |SD4/8GB |Works reliably with Raspbian 18-9-2012 and previous Debian releases (Picards) |Md84419 5 Nov 2011, Picards 28 Oct 2012 |- |style='background-color:#c00;'| nok |Kingston |SDHC |8 |4 |SD4/8GB |does not work with current build of raspbmc (LastSilmaril), unreliable with raspbian (Quentinsf) |LastSilmaril 24 May 2012, Quentinsf 20 Oct 2012 |- |style='background-color:#0a0;'| ok |Kingston |SDHC |8 |6 |SD6/8GB |errors on boot, but ok (Debian), does not work with raspbmc rc2 or archlinux |Jamsta 5 Jun 2012 |- |style='background-color:#0a0;'| ok |Kingston |SDHC |8 |10 |SD10G2/8GB ultimateX 100X, SD10V/8GB ultimateX 120X | |ShiftPlusOne 24 Apr 2012, Stevepdp 13 May 2012 |- |style='background-color:#0a0;'| ok |Kingston |SDHC |8 |10 |SD10G3/8GB Elite |Works with Raspbian Wheezy 25/05/2013 |Deicide 17 July 2013 |- |style='background-color:#c00;'| nok |Kingston |SDHC |8 |10 |SD10V/8GB |Stevhorn: Very slow writing images to card and then either won't boot, or boots very slowly.
2rB: Card seems fine while in computer. In pi, only able to read the boot partition. OS will not boot. |Stevhorn 14 Aug 2012.
2rB 31 Dec 2013. |- |style='background-color:#0a0;'| ok |Kingston |SDHC |16 |4 |SD4/16GB | |Skiesare 27 May 2012 |- |style='background-color:#c00;'| nok |Kingston |SDHC |16 |4 |SDC4/16GB17 |Device does not recognize it |Martink 24 Jul 2012 |- |style='background-color:#0a0;'| ok |Kingston |SDHC |16 |6 |SD6/16GB | |Malvineous 17 Jun 2012 |- |style='background-color:#0a0;'| ok |Kingston |SDHC |16 |10 |SD10G2/16GB ultimateX 100X, SD4/16GBET | |Stevepdp 13 May 2012 |- |style='background-color:#c00;'| nok |Kingston |SDHC |16 |10 |SD10G2/16GB ultimateX 100X |mmc0: Timeout waiting for hardware interrupt |Kimmoli 27 Jan 2013 |- |style='background-color:#c00;'| nok |Kingston |SDHC |16 |10 |SD10V/16GB |Starts boot ok but then gets stuck in mmc0 timeouts |Hh 14 Nov 2012 |- |style='background-color:#c00;'| nok |Kingston |SDHC |16 |10 |SD10V/16GB
(N0440-001. A00LF TAIWAN JM94513-908.A00LF) |mmc0 timeouts |Epa 20130304 |- |style='background-color:#c00;'| nok |Kingston |SDHC |16 |10 |SD10V/16GB
(N0440-002. A00LF TAIWAN JM94585-902.A00LF) |not booting. no hdmi output. red leds on solid, green leds very lightly dimmed, no green flash/blink |smerz 20131230 |- |style='background-color:#0a0;'| ok |Kingston |SDHC |16 |10 |SD10V/16GB
(N0372-002. A00LF TAIWAN JM94450-901.A00LF) |Seems to work |Epa 20130403 |- |style='background-color:#0a0;'| ok |Kingston |SDHC |16 |10 |SD10V/16GB | |Franeks 14 Feb 2013 |- |style='background-color:#0a0;'| ok |Kingston |SDHC |32 |10 |SD10G2/32GB, ultimateX 100X, SD10V | |Tony 29 May 2012, Pmvarsa 17 Jul 2012 |- |style='background-color:#0a0;'| ok |Kingston |SDHC |32 |10 |SD10V/32GB
(N0415-002.A00LF TAIWAN JM94450-913.AOOLF) |works |Epa 20130304 |- |style='background-color:#0a0;'| ok |Kingston |SDXC |64 |10 |SDX10V/64GB | |Bromont 25 Nov 2012 |- |style='background-color:#0a0;'| ok |Kingston |SDXC |64 |10 |SD10G3/64GB UHS-I Elite | |Plnt 10 Jul 2013 |- |style='background-color:#0a0;'| ok |Kingston |SDX |128 |10 |SDX10V/128GB |Must format it as FAT32. Took a very long time for Pi to install system. |H. Matis 3 Dec 2013 |- |style='background-color:#c00;'| nok |Kingston |microSDHC |2 | |SD-CO2G |Does not boot. Capacity (1.97 GB) seems only just enough for 2013-02-09-wheezy-raspbian.img (1.94 GB). |Pe7er 18 Mar 2013 |- |style='background-color:#0a0;'| ok |Kingston |microSDHC |2 | |N0185-002.A00LF |Adapter (File system .img written via Transcend microSDHC "USB stick-like" adapter - P3-102510) |TrevorGowen 27 Jul 2012 |- |style='background-color:#0a0;'| ok |Kingston |microSDHC |4 |4 | | |Bredman 16 May 2012 |- |style='background-color:#c00;'| ok |Kingston |microSDHC |4 |4 |SDC4/4GB (CO4G) |Starts to boot and fails. "... Kernel panic ... unable to mount root fs on unknown block ... " |ow3n 4 Oct 2013 |- |style='background-color:#0a0;'| ok |Kingston |microSDHC |8 |4 |SDC4/8GB | |Lilt 9 May 2012 |- |style='background-color:#0a0;'| ok |Kingston |microSDHC |32 |4 |SDC4/32GB (C32G) | |ow3n 8 Oct 2013 |- |style='background-color:#c00;'| ok |Kingston |microSDHC |8 |10 |SDC10/8GB |Work on Raspian, but doesn't work with NOOB. [Suggestion : download full image of O.S. and put it into SD card directly.] |webserfer 03 March 2013 submarine 03 Jan 2014 |- |style='background-color:#0a0;'| ok |Kingston |microSDHC |16 |10 |SDC10/16GB |Doesn't work with N0390-002.A00LF though (tested with Raspbian “wheezy”) - mmc0 timeouts, waiting for hw int. I wouldn't recommend buying this card. N0460-002.A00LF: Does not boot / io error from dmesg with os running from usb. |Arrow 14 Jun 2012, J3rGuS 19 March 2013, Jettis 5 Sep 2013 |- |style='background-color:#0a0;'| ok |Kodak |SDHC |4 |2 | | |Semtex 21 May 2012 |- |style='background-color:#0a0;'| ok |Kodak |SDHC |8 |4 | | |Britaniola 22 Apr 2012 |- |style='background-color:#0a0;'| ok |Kruidvat |SDHC |8 |4 | | |Boeboe 18 May 2012 |- |style='background-color:#0a0;'| ok |Kruidvat |SDHC |8 |10 | | |Asiklov 25 Oct 2012 |- |style='background-color:#0a0;'| ok |Lexar |SDHC |4 |4 | |Boots consistently and no error messages in log after 1/2 hour use (works with Raspbmc - 321liftoff) |Russell 26 Apr 2012 |- |style='background-color:#0a0;'| ok |Lexar |SDHC |4 |6 |Platinum II | |Pdp7 25 Apr 2012 |- |style='background-color:#0a0;'| ok |Lexar |SDHC |8 |4 |Milti-Use SDHC LSD8GB ASBWMC2 rev.B, on card 31352-oc4-8gbbm-a |sold in 1 or 2 pack |Spyder Mar-2013 |- |style='background-color:#0a0;'| ok |Lexar |SDHC |8 |4 | | |Md84419 21 Apr 2012 |- |style='background-color:#0a0;'| ok |Lexar |SDHC |8 |6 |Platinum II | |Shirro 7 May 2012 |- |style='background-color:#c00;'| nok |Lexar |SDHC |8 |6 |Premium series | |blazi 17 December 2013 |- |style='background-color:#0a0;'| ok |Lexar |SDHC |8 |10 |Platinum II (200X) LSD8GBBBEU200C10 |Works fine on OpenElec 3.0.6 |Vygandas 18 Jun 2013 |- |style='background-color:#0a0;'| ok |Lexar |SDHC |8 |10 |Platinum II UHS-I (LSD8GBBSBNA200C10 Rev C) |Works fine w/NOOBS v1.3.4 Raspbian |fortran87 Jan 2014 |- |style='background-color:#0a0;'| ok |Lexar |SDHC |16 |6 |Platinum II | |Semtex 21 May 2012 |- |style='background-color:#0a0;'| ok |Lexar |SDXC |64 |10 |Premium series |UHS-I |Kuisma 17 Apr 2013 |- |style='background-color:#0a0;'| ok |Lexar |SDXC |128 |10 |LSD128CTBNA400 |UHS-I |AdamGreenblatt 12 Aug 2012 |- |style='background-color:#0a0;'| ok |Lexar |microSDHC |32 |10 |HIGH-SPEED | |RogerH 5 Jul 2012 |- |style='background-color:#0a0;'| ok |Master |SDHC |16 |10 | |[man:0x000003 oem:0x5344 name:SMI hwrev:0x1 fwrev:0x0] |Malvineous 1 Jul 2012 |- |style='background-color:#c00;'| nok |Master Optimum |SDHC |16 |10 | |Only 1 red LED lit, no HDMI output. Started booting one single time then crashed during boot. No errors writing card on Mac |User234891 23 May 2013 |- |style='background-color:#0a0;'| ok |Maxell |SDHC |16 |4 |X-SERIES |MicroSD w/ adapter. Tested with latest version of Raspbian (as at date of entry). |Drummingsim 28 Jul 2013 |- |style='background-color:#c00;'| nok |Maxell |SDHC |16 |10 |X-Series 83-P120001149-1 | |Paul 26 Aug 2013 |- |style='background-color:#0a0;'| ok |Medion |SDHC |8 |4 | | |Buadhach 29 Jul 2012 |- |style='background-color:#0a0;'| ok |Medion |microSDHC |32 |6 |MD86958 |works well with NOOBS 1-2-1 and Raspbian |Joerg 14 Aug 2013 |- |style='background-color:#0a0;'| ok |Medion |SDHC |32 |6 |MD86965 |works well with NOOBS 1-2-1, Raspbian and RiscOS |Joerg 19 Aug 2013 |- |style='background-color:#0a0;'| ok |Memorex Travel Card |SDHC |8 |10 |? |Works well with Raspbian 2013-09-25. |The Doctor, 25 October 2013 |- |style='background-color:#c00;'| nok |Memory2Go |SDHC |4 |6 |S404G1029 |I/O Errors leading to Kernel Panic on startup |Snohi 12 Jun 2012 |- |style='background-color:#c00;'| nok |Microcenter |SDHC |4 |4 | |hasn't worked with any of the images I've tried; appears to be completely unrecognized |Pnppl 11 Jun 2012 |- |style='background-color:#0a0;'| ok |Microcenter |SDHC |8 |4 |0289508 |(sold in bins at checkout) |Pdp7 25 Apr 2012 |- |style='background-color:#0a0;'| ok |Microcenter |SDHC |8 |10 |0349728 |(sold in bins at checkout) |Pdp7 25 Apr 2012 |- |style='background-color:#0a0;'| ok |Microcenter |SDHC |16 |10 | |(sold in bins at checkout) |Crayfishandy 11 Jul 2012 |- |style='background-color:#0a0;'| ok |Mushkin |SDHC |16 |10 |MKNSDHCU1-16GB | |Frank26080115 1 Jul 2012 |- |style='background-color:#0a0;'| ok |Mushkin |SDHC |32 |10 |MKNSDHCC10-32GB | |Openboat 30 May 2012 |- |style='background-color:#0a0;'| ok |Mustang |SDHC |8 |10 |SD8GHCCL10MU-R | |Xanatos 31 May 2012 |- |style='background-color:#0a0;'| ok |MyMemory |SDHC |8 |10 |MYMESDH8G10 |(latest batch not working - Bubblebobble) |Rew 18 Apr 2012 |- |style='background-color:#c00;'| nok |MyMemory |SDHC |8 |10 | | |Jezmck 27 Apr 2012 |- |style='background-color:#0a0;'| ok |MyMemory |SDHC |16 |10 |MYMESDH16G10 | |Jblackburn 9 Jun 2012 |- |style='background-color:#0a0;'| ok |MyMemory |SDHC |32 |10 | | |Dale2507 10 Nov 2012 |- |style='background-color:#0a0;'| ok |OCZ |SDHC |8 |6 |Gold Series (08110596-8GB-6) |tested with debian6-19-04-2012 |Alkarex 16 Jun 2012 |- |style='background-color:#0a0;'| ok |Optima |SDHC |8 |4 | |Does not boot with Raspbian Wheezy 2012-07-15. Works with 2012-09-18 |Penguintutor 19 Aug 2012 / 10 Oct 2012 |- |style='background-color:#0a0;'| ok |Optima |SDHC |8 |10 |Pro-Speed | |DaWoodster 13 May 2012 |- |style='background-color:#0a0;'| ok |Panasonic |SDHC |4 |4 | | |Mikerr 5 Jul 2012 |- |style='background-color:#0a0;'| ok |Panasonic |SDHC |4 |10 |UHS-I |(~11.2MB/s read, ~6.2MB/s write) |M4rcs 26 Jul 2012 |- |style='background-color:#0a0;'| ok |Panasonic |SDHC |4 |10 |RP-SDRB04G |Tested with Rasbian Wheezy |jwdietrich 02 Jun 2013 |- |style='background-color:#0a0;'| ok |Panasonic |SDHC |4 |4 |RP-SDLB04GAK |Tested with Pidora (Fedora) |jwdietrich 06 Jul 2013 |- |style='background-color:#0a0;'| ok |Panasonic |SDHC |8 |2 | |(~11.1MB/s read, ~9.7MB/s write) |Malexmave 19 Jul 2012 |- |style='background-color:#0a0;'| ok |Panasonic |SDHC |8 |6 | |~4.8MB/s read, ~4.4MB/s write, following the Performance below |Xonx 21 Apr 2012 |- |style='background-color:#c00;'| nok |Panasonic |SDHC |8 |10 |RP-SDU08GD1K - London-2012-Collection |mmc0: timeout waiting for hardware interrupt |Selsinork 26 Apr 2012 |- |style='background-color:#0a0;'| ok |Patriot |SDHC |8 |6 |PSF8GSDHC10-PC | |Paradigmic 7 Jun 2012 |- |style='background-color:#c00;'| nok |Patriot |SDHC |8 |6 |PS8GSDHC10-BC |repeatable corruption after 1 or 2 reboots with 2012-07-15-wheezy-raspbian |Ntrepid8 17 Aug 2012 |- |style='background-color:#c00;'| nok |Patriot |SDHC |8 |10 |PSF16GMCSDHC10 | |Elatllat 22 Dec 2011 |- |style='background-color:#0a0;'| ok |Patriot |SDHC |8 |10 |LX Series PSF8GSDHC10-PC1 | |Nugget 9 Jun 2012 |- |style='background-color:#0a0;'| ok |Patriot |SDHC |16 |10 |LX Series PSF16GSDHC10-PC1 (PSF16GSDHC10) |Tested with Rasbian Wheezy |Leonardicus 25 Jun 2013 |- |style='background-color:#c00;'| nok |Patriot |SDHC |8 |10 |PSF8GSDHC10-PC |won't even boot 2012-08-16-wheezy-raspbian (mmc0: timeout waiting for hardware interrupt, followed by continuous I/O errors, timeouts, etc). Seems functional in Arch, but sometimes freezes at the beginning of boot (blinking underscore) |Dgatwood 12 Sep 2012 |- |style='background-color:#c00;'| nok |Patriot |microSDHC |8 |10 |PSF8GMCSDHC10 |I observed behavior similar to the full size version of this card (mmc0: timeout waiting for hardware interrupt, followed by continuous I/O errors, timeouts, etc). |CVBruce 25 Jan 2013 |- |style='background-color:#0a0;'| ok |Patriot |SDHC |8 |10 |LX Series PSF8GSDHC102PK |Twin pack |verket 8 Jan 2013 |- |style='background-color:#0a0;'| ok |Patriot |SDHC |16 |10 |LX Series (PSF16GSDHC10) |19.3MB/s read, 9.3MB/s write |Jamesnine 28 Jun 2012 |- |style='background-color:#0a0;'| ok |Patriot |SDHC |32 |10 |PSF32GSDHC10 | |Megs 29 May 2012 |- |style='background-color:#0a0;'| ok |Patriot |SDHC |32 |10 |UHS-1 PEF32GSDHC10U1 |20.4MB/s read, 12.1MB/s write |Bengoerz 12 Aug 2012 |- |style='background-color:#0a0;'| ok |Patriot |microSDHC |16 |10 |PSF16GMCSDHC10 |requires recent kernel update for boot |Wmdopple 9 Jun 2012 |- |style='background-color:#c00;'| nok |Patriot |microSDHC |16 |10 |PSF16GMCSDHC10 |fails with 2012-12-16-wheezy-raspbian and with 1/8/13 kernel update. mmc0: controller never released inhibit bit(s) and mmc0: timeout waiting for hardware interrupt. Other cards work. |verket 8 Jan 2013 |- |style='background-color:#0a0;'| ok |Peak |microSDHC |4 |4 |MMBTR04GUBCA-ME |tested with Arch |Selsinork 20 Apr 2012 |- |style='background-color:#0a0;'| ok |Philips |SDHC |8 |4 |FM08SD35B | |Oostenvr 4 Jul 2012 |- |style='background-color:#c00;'| nok |Philips |microSDHC |8 |4 |FM08MD35B |(man:0x000027 oem:0x5048 name:SD08G hwrev:0x3 fwrev:0x0), with microSD to SD adapter, boots, (mmc0: timeout waiting for hardware interrupt, followed by continuous I/O errors, timeouts, etc), 2013-02-09-wheezy-raspbian |Bernard Ladenthin 12 Mar 2013 |- |style='background-color:#0a0;'| ok |Platinum |SDHC |4 |6 | | |Njoyard 6 Jul 2012 |- |style='background-color:#0a0;'| ok |Platinum |SDHC |4 |10 |127660 |Tested with a Raspbian Wheezy using a custom and a stock kernel. Both Ok. |cpb 15 oct 2013 |- |style='background-color:#c00;'| nok |Platinum |SDHC |8 |6 | Fails with mmc error (7 cards in 10) on ccidentalis_v02. Fails on laptops which use mmc driver instead of SATA |(man:0x00006f oem:0x0000 name:SMI hwrev:0x1 fwrev:0x0) |Leucos 22 March 2013 |- |style='background-color:#c00;'| nok |Platinum |SDHC |8 |8 |O08G840 M3100487 TW | |MaWe 13 Aug 2012 |- |style='background-color:#0a0;'| ok |Platinum |SDHC |8 |10 |RTK247T5MD08G order no. 126982 | |Cobalt 9 Apr 2013 |- |style='background-color:#c00;'| nok |Platinum |SDHC |8 |10 |8DK52-131ME |hctosys.c: unable to open rtc device (rtc0)
mmc0: Timeout waiting for hardware interrupt - cmd18
mmc0: Timeout waiting for hardware interrupt - cmd12
mmc0: Timeout waiting for hardware interrupt - cmd13
mmcblk0: error -110 sending status command, retrying
mmc0: Timeout waiting for hardware interrupt - cmd13
mmcblk0: error -110 sending status command, retrying
mmc0: Timeout waiting for hardware interrupt - cmd13
mmcblk0: error -110 sending status command, aborting
mmc0: Timeout waiting for hardware interrupt - cmd13
mmc0: Timeout waiting for hardware interrupt - cmd13
mmc0: Timeout waiting for hardware interrupt - cmd13
mmc0: Timeout waiting for hardware interrupt - cmd13
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(179,2)
on Arch Linux ARM hf 2013-02-11 |Cobalt 9 Apr 2013 |- |style='background-color:#c00;'| nok |Platinum |SDHC |16 |10 | |Does not boot with Raspbian Wheezy 2012-09-12 |Palto 13 Sep 2012 |- |style='background-color:#0a0;'| ok |Platinum |SDXC |64 |10 | | |Datafreak 30 Jul 2012 |- |style='background-color:#0a0;'| ok |Platinum |SDXC |128 |10 | |man:0x000074 oem:0x4a45 name:SDU1 hwrev:0x0 fwrev:0x2 Tested with BerryTerminal, NOOBS, OpenELEC, Raspbian and Raspbmc |Ienny 25 Sep 2013 |- |style='background-color:#0a0;'| ok |Platinum |microSDHC |16 |6 | | |gecko16300 24 Aug 2013 |- |style='background-color:#0a0;'| ok |Play.com |SDHC |4 |6 |S4E3CD04GEFAA 0907090121106 | |JoeDaStudd 18 May 2012 |- |style='background-color:#0a0;'| ok |PNY |SD |2 |? |SD-M02G | |Ewindich 24 Jul 2012 |- |style='background-color:#0a0;'| ok |PNY |SDHC |4 |4 | | |Md84419 21 Apr 2012 |- |style='background-color:#0a0;'| ok |PNY |SDHC |4 |4 |Optima (SD-K04G 0834TT1297Y) | |Weston 20 May 2012 |- |style='background-color:#c00;'| nok |PNY |SDHC |8 |4 |Optima 120 HD SD-K08G 0928 WF3673 |mmc -110 errors at init time on 12 Jun 2012 |Zoward 12 Jun 2012 |- |style='background-color:#0a0;'| ok |PNY |SDHC |8 |4 |Premium (Toshiba SD-K08G) | Works with 2014-01-07-wheezy-raspbian |PotOfJava 08 Feb 2014 |- |style='background-color:#c00;'| nok |PNY |SDHC |8 |4 |Premium |mmc - mmc0: timeout waiting for hardware interrupt |Davidgyoung 21 Sep 2012 |- |style='background-color:#0a0;'| ok |PNY |SDHC |8 |6 | | |Threedaymonk 5 Jun 2012 |- |style='background-color:#0a0;'| ok |PNY |SDHC |8 |10 |P-SDHC8G10-GE |1 - Tested with 2013-02-09-wheezy. 2 - On Mac, dd to image did not work, but SD Card Builder did. Wheezy read and write right at about 20MBps. After booting, I installed several packages - all fine. After that, I installed RetroPie. That took about 15 hours to download and compile - zero errors. |1 - Zambon 9 Mar 2013, 2 - RicM July 17 2013 |- |style='background-color:#0a0;'| ok |PNY |SDHC |16 |4 | | |Gcat 14 May 2012 |- |style='background-color:#0a0;'| ok |PNY |SDHC |16 |10 |P-SDHC16G10-GE, P-SDHC16G10-EF, Pro-Elite P-SDHC16U10-30-GE |Works with Wheezy, does not work with Squeeze (mmc0: timeout...), Arch (no boot) (Joshdev), or Fedora Remix. Works with Raspbmc (Sp00l) |Jecxjo 9 Jun 2012, Joshdev 22 Jun 2012, Sp00l 21 Jul 2012 |- |style='background-color:#0a0;'| ok |PNY |SDHC |32 |10 |P-SDHC32G10-GE |Works with Arch 2012-09-18 and Raspbian 2012-12-16 |Derekivey 29 Dec 2012 |- |style='background-color:#c00;'| nok |PNY |SDHC |32 |10 |Professional (P-SDHC32G10-EF) |(mmc0 timeout with Debian, error -84 whilst initialising sd card with Fedora and QtonPi. Arch seems to work, gets to the login prompt) |Optim4l 9 May 2012 |- |style='background-color:#c00;'| nok |PNY |SDHC |32 |10 |Pro |Debian installation worked, [brand new] Card died a few minutes later with mmc0 timeouts, during apt-get upgrade. Never got it to work again on any system |Gryzor 10 May 2013 |- |style='background-color:#0a0;'| ok |PNY |SDHC |32 |10 |P-SDH32U1H-GES3 Elite Performance |Happily banging away for over a month now; Raspbian Linux 3.6.11+ #456 PREEMPT armv6l system v,3.3.3 |Jerasmussen 12 Aug 2013 |- |style='background-color:#0a0;'| ok |PNY |microSDHC |4 |4 | |with adapter |Zulucat 21 Jun 2012 |- |style='background-color:#0a0;'| ok |PNY |microSDHC |8 |10 | |with adapter |Zulucat 6 Jul 2012 |- |style='background-color:#0a0;'| ok |PNY |microSDHC |32 |10 | |with AdaFruit adapter |Wibble 22 Jan 2013 |- |style='background-color:#c00;'| nok |Polaroid |SDHC |16 |10 |P-SDHC16GB10-EFPOL |mmc0: timeout waiting for hardware interrupt on debian6-19-04-2012 |Jamesnine 28 Jun 2012 |- |style='background-color:#0a0;'| ok |PQI |SDHC |8 |6 | |Works with official debian6-19-04-2012 |Remick 12 Jul 2012 |- |style='background-color:#0a0;'| ok |PRETEC |SDHC |8 |10 |8DK52-122ME | |ScorpAl 19 Jun 2012 |- |style='background-color:#c00;'| nok |PRETEC |SDHC |8 |10 |233x (PC10SDHC08G) |mmc0: timeout waiting for hardware interrupt, Sometimes does not boot, kernel panic |Petacz 8 Aug 2012, DarkKnightCZ 23 Jan 2013 |- |style='background-color:#0a0;'| ok |promaster.com |SDHC |8 |10 | |man:0x000027 oem:0x5048 name:SD08G hwrev:0x3 fwrev:0x0 |Douglas W. Jones Jan 2013 |- |style='background-color:#c00;'| nok |Reekin |SD |4 |? | |doesn't boot |Nicobsa 11 Jul 2012 |- |style='background-color:#0a0;'| ok |Samsung |SDHC |4 |? | | |Genocho 26 Apr 2012 |- |style='background-color:#0a0;'| ok |Samsung |SDHC |4 |? | | |Genocho 26 Apr 2012 |- |style='background-color:#c00;'| nok |Samsung |SDHC |4 |4 |MB-SS4G MBSS4GMBDDBA-DD |doesn't boot with 2012-07-15-wheezy-raspbian; OK light partially lit |Doctoruseful 19 Aug 2012 |- |style='background-color:#0a0;'| ok |Samsung |SDHC |8 |6 |MB-SS8GAEU | |Dakaix 24 Apr 2012 |- |style='background-color:#0a0;'| ok |Samsung |SDHC |8 |10 |MB-MP8GA, MB-SP8GA/EU, MB-SP8GA/AM | |Garrocha 19 May 2012 |- |style='background-color:#0a0;'| ok |Samsung |SDHC |16 |6 |MB-SSAGAEU | |Dakaix 24 Apr 2012 |- |style='background-color:#0a0;'| ok |Samsung |SDHC |16 |6 |MB-SSAGB/EU | |leon.anavi 26 Jun 2013 |- |style='background-color:#0a0;'| ok |Samsung |SDHC |16 |10 |MB-SGAGB (UHS-I PRO) | |miljenko 30 Jan 2014 |- |style='background-color:#0a0;'| ok |Samsung |SDHC |32 |6 |MB-SSBGBFFP | |Xerxes 02 Sep 2013 |- |style='background-color:#0a0;'| ok |Samsung |SDHC |16 |10 |MB-SPAGA / MB-SPAGAEU | |Optim4l 11 May 2012 |- |style='background-color:#0a0;'| ok |Samsung |SDHC |32 |10 |MB-SSBGA, MBSSBGVEOBGA-SH |OK with Debian Wheezy. debian6-19-04-2012: mmc0: timeout waiting for hardware interrupt |Alkarex 11 Jun 2012 |- |style='background-color:#0a0;'| ok |Samsung |microSDHC |8 |6 |MMAGR08GUDCA-DB | |Ewindich 24 Jul 2012 |- |style='background-color:#0a0;'| ok |Samsung |microSDHC |16 |10 |MB-MPAGC (MB-MPAGAEU) |man:0x00001b oem:0x534d name:00000 hwrev:0x1 fwrev:0x0 |Olf 19 Sep 2013 |- |style='background-color:#0a0;'| ok |Samsung |microSDHC |32 |10 |MB-MSBGAEU |man:0x00001b oem:0x534d name:00000 hwrev:0x1 fwrev:0x0 - works with 2013-12-20-wheezy-raspbian.zip, Kernel 3.10 |Johannes 24 Dec 2013 |- |style='background-color:#0a0;'| ok |Samsung |microSDHC |64 |10 |MB-MGCGBA/AM |Comes with a SD adapter. Installed 2014-01-07 Raspbian Wheezy, works perfectly! |PatriotInAKilt 20 Jan 2014 |- |style='background-color:#c00;'| nok |SanDisk |SD |2 |? |BE0916214253D | |Mate12345 9 Aug 2012 |- |style='background-color:#0a0;'| ok |SanDisk |SD |2 |? | |Extreme III (BE0715105083B) |Dscott 23 Apr 2012 |- |style='background-color:#c00;'| nok |SanDisk |SD |2 |? |Extreme III (BE0722702998D) |(man:0x000003 oem:0x5344 name:SD02G hwrev:0x8 fwrev:0x0) - tested with Raspbian (build 2012-07-15) and Raspbmc installer (build 2012-07-13) |Boandlkramer 5 Aug 2012 |- |style='background-color:#0a0;'| ok |SanDisk |SD |2 |2 |BE0816113150D |writes at 3.5 Mb/s |Elatllat 22 Dec 2011 |- |style='background-color:#0a0;'| ok |SanDisk |SD |2 |4 |Ultra |15 MB/s |Md84419 24 Sept 2011 |- |style='background-color:#0a0;'| ok |SanDisk |SD |2 |4 |Ultra II, BE0719111366D | |Md84419 5 Nov 2011, Oostenvr 4 Jul 2012 |- |style='background-color:#c00;'| nok |SanDisk |SDHC |2 |? |Ultra II BE0828713280D (15 MB/s) | |Oostenvr 4 Jul 2012 |- |style='background-color:#0a0;'| ok |SanDisk |SD |2 |6 |Extreme III (BE0804212046D) |20 MB/s |Nooitaf 20 Jun 2012 |- |style='background-color:#0a0;'| ok |SanDisk |SD |2 |? | |SanDisk for Wii |Stevepdp 18 Apr 2012 |- |style='background-color:#0a0;'| ok |SanDisk |SDHC |4 |2 |BH0820113475D |Tested with RPITC (Based on Raspbian Wheezy) |Rendyair 11 Sep 2012 |- |style='background-color:#c00;'| nok |SanDisk |SDHC |4 |2 | |Debian and xbmc boot, but fedora gets a lot of mmc0 note long write sync errors and then hc_xfer_timeout errors at the login prompt |Optim4l 10 May 2012 |- |style='background-color:#c00;'| nok |SanDisk |SDHC |4 |2 |8H825413279G "Limited Edition" |Error -110 whilst initialising sd card |Jezmck 27 May 2012 |- |style='background-color:#0a0;'| ok |SanDisk |SDHC |4 |4 |SDSDB-004G-B35, BH1210821913G, SDSDB-004G-BT35 | |Md84419 6 May 2012, Nicobsa 11 Jul 2012, Ingestre 12 Jul 2012 |- |style='background-color:#c00;'| nok |SanDisk |SDHC |4 |4 |BH1030216016G, BH1031116016G |Doesn't boot |SquallStrife 15 May 2012, Vk2amv 9 Jun 2012 |- |style='background-color:#c00;'| nok |SanDisk |SDHC |4 |4 |Ultra (BH1028516076D) |Intermitant booting ( 1/50 power on ), random timeout messages when it does boot |Russell 26 Apr 2012 |- |style='background-color:#c00;'| nok |SanDisk |SDHC |4 |4 |Ultra (SDSDH-004G-U46) |won`t reboot when it`s hot |Sorinm 17 May 2012 |- |style='background-color:#0a0;'| ok |SanDisk |SDHC |4 |4 |Ultra II | |Britaniola 22 Apr 2012 |- |style='background-color:#0a0;'| ok |SanDisk |SDHC |4 |6 |Extreme III (30 MB/s) |works with 2012-10-28-wheezy-raspbian |JeffS 11 Nov 2012 |- |style='background-color:#c00;'| nok |SanDisk |SDHC |4 |6 |Extreme III C6 (BH0822411730D) | |Cmcr651 7 May 2012 |- |style='background-color:#c00;'| nok |SanDisk |SDHC |4 |6 |Extreme III (30 MB/s) (BH0822712362G) | |Jezmck 27 May 2012 |- |style='background-color:#0a0;'| ok |SanDisk |SDHC |4 |6 |Ultra SDSDH-004G-U46 - BH1136121837G, BH1130521822D, BH1200421822D (30MB/s) | |Selsinork 20 Apr 2012 / Alex347 5 May 2012 / Jjuhl 26 May 2012 |- |style='background-color:#0a0;'| ok |SanDisk |SDHC |4 |10 |Extreme (BH10297143382G) | |Wrdx 19 May 2012 |- |style='background-color:#c00;'| nok |SanDisk |SDHC |4 |10 |Extreme (SDSDX-004G-X46) |30 MB/s HD Video - Doesn't boot - Works with new kernel.img and start.elf (Paaland), not working with new kernel.img and start.elf 17-06-2012 or "wheezy"-beta (MrF) |Paaland 21 May 2012, MrF 19 Jun 2012 |- |style='background-color:#0a0;'| ok |SanDisk |SDHC |4 |10 |Extreme (SDSDX-004G-X46) |Works with RasPlex 0.3.1 |Bellagio 15 Nov 2013 |- |style='background-color:#0a0;'| ok |SanDisk |SDHC |8 |4 | |writes at ~1.5MB/s |Ms705 30 Mar 2012 |- |style='background-color:#0a0;'| ok |SanDisk |SDHC |8 |4 |Ultra BI1024716014G |labelled as 15MB/s |PhilH 3 Jun 2012 |- |style='background-color:#0a0;'| ok |SanDisk |SDHC |8 |4 |SDSDB-008G-B35S / SDSDB-008G-B35 |Raspbian “wheezy”: used expand_rootfs option of sudo raspi-config command to make all 8GB available. |Swehner Jan 2013, Baji Feb 2013 |- |style='background-color:#0a0;'| ok |SanDisk |SDHC |8 |4 |SDSDB3-008G-A16BJ / BJ's 3-pack |Tested OK with RISC OS |Lanulos 11 Sep 2013 |- |style='background-color:#c00;'| nok |SanDisk |SDHC |8 |6 |Extreme (BI1101116253G) | |Alex347 5 May 2012 |- |style='background-color:#0a0;'| ok |SanDisk |SDHC |8 |6 |Ultra SDSDH-008G-U46 / BI1131222083D, BI11321422083D (20 MB/s) & SDSDH-008G-T11 (30MB/s) & SDSDH2-008G-AC11 |SDSDH2-008G-AC11 requires updated Squeeze or Wheezy beta (Jim Manley) |Dakaix 24 Apr 2012, Crox 23 Jun 2012, Jim Manley 27 Jun 2012 |- |style='background-color:#c00;'| nok |SanDisk |SDHC |8 |6 |Ultra SDSDH-008G-U46 (BI1201421964G / BI1201221964G / BI1131222083D), SDSRH-008G-A11 & SDSDH-008G-T11 (30 MB/s) |Boots kernel but won't run init (mmc timeout waiting for interrupt) debian6-19-04-2012 |Trebor27 15 Apr 2012 / Russell 26 Apr 2012 / ChuckHunky 8 May 2012/ Ryantm 10 Jun 2012 |- |style='background-color:#0a0;'| ok |SanDisk |SDHC |8 |10 |Extreme (BI11017514367G / BI1130916254G / B11209116254G / SDSDX-008G-X46/BI1218822414G) |May need updated bootcode.bin (BELzEBUB), Confirmed on Debian Squeeze 2012-04-19 and Arch Linux 2012-06-13 (Arces), works with Raspian R3 (Histvan) |Timer 16 May 2012, BELzEBUB 30 Jun 2012, Arces 9 Jul 2012, Histvan 14 Jul 2012 |- |style='background-color:#0a0;'| ok |SanDisk |SDHC |8 |10 |Extreme (SDSDX-008G-X46/BI1111816252D) |tested on 2013-02-09 Raspian and Rasplex 0.1.37 |Jahislove 11 may 2013 |- |style='background-color:#c00;'| nok |SanDisk |SDHC |8 |10 |Extreme BI1108716254G, BI110209116254G | |Dscott 23 Apr 2012, Max 31 May 2012 |- |style='background-color:#c00;'| nok |SanDisk |SDHC |8 |10 |Extreme (BI1200916252D/SDSDX-008G-X46), BI1201416254G |Doesn't work with debian6-19-04-2012.img and with replacement kernel.img and start.elf (Weston). Doesn't work with Debian Wheezy beta (2012-06-18)(Halton). Doesn't work with Arch Linux 13/06/2012 (Madhur) |Weston 20 May 2012, Halton 8 Jun 2012, Madhur 27 Jun 2012 |- |style='background-color:#0a0;'| ok |SanDisk |SDHC |8 |10 |Extreme Pro (SDSDXPA-008G-X46) |(95MB/s UHS-I) - Works with stock 2012-07-15-wheezy-raspbian |Incyi 28 Jul 2012 |- |style='background-color:#0a0;'| ok |SanDisk |SDHC |8 |10 |Extreme Pro |Works with stock Arch Linux 2013-05-01 |Perchrh 28 Apr 2012, Tiwipewo 27 May 2012, Perchrh 17 May 2013 |- |style='background-color:#0a0;'| ok |SanDisk |SDHC |8 |10 |Ultra SDSDU-008G-U46 (30 MB/s) |Works with debian6-19-04-2012 or raspbian images but not with OpenELEC r11212 (MrF). Works with OpenELEC r11493 (Vishnu vijay); works with 2013-09-25-wheezy-raspbian man:0x000003 oem:0x5344 name:SU08G hwrev:0x8 fwrev:0x0 (tswaehn) |MrF 6 Jun 2012, Vishnu vijay 28 Jul 2012, tswaehn 07 dec 2013 |- |style='background-color:#0a0;'| ok |SanDisk |SDHC |8 |10 |Ultra SDSDU-008G-A11 (30 MB/s) |Works with raspbian images (blitzkrieg). |Blitzkrieg 26 Feb 2013 |- |style='background-color:#0a0;'| ok |SanDisk |SDHC |8 |10 |Ultra SDSDU-008G-T11 (30 MB/s) |Works with Arch Linux 20130813 (L. Snow). |L. Snow 27 Dec 2013 |- |style='background-color:#0a0;'| ok |SanDisk |SDHC |8 |10 |Ultra SDSDU-008G-UQ46 (30 MB/s) |Works with Raspbian (wheezy) 3.10.21+ (Read ~18.6MB/s Write ~14.5MB/s) man:0x000003 oem:0x5344 name:SU08G hwrev:0x8 fwrev:0x0 |Sauce 3 Dec 2013 |- |style='background-color:#0a0;'| ok |SanDisk |SDHC |16 |4 |SDSDB-016G-B35 | |NickstaDB 17 Apr 2012 |- |style='background-color:#0a0;'| ok |SanDisk |SDHC |16 |4 |SDSDB-016G-A11 |Tested on OpenELEC, Arch, and NOOBS |funkeywoookey 9 Jun 2013 |- |style='background-color:#c00;'| nok |SanDisk |SDHC |16 |4 |SDSDB-016G-AFFP |Attempted with Windows, Linux dd, and Fedora ARM installer. RPi would not load and Linux could not mount after image written to card |mwolfgang 19 Mar 2013 |- |style='background-color:#0a0;'| ok |SanDisk |SDHC |16 |6 |Ultra (30MB/s) (BL1133921933G) |Works with OpenELEC r11324 |Reckoner 17 Jun 2012 |- |style='background-color:#c00;'| nok |SanDisk |SDHC |16 |6 |Ultra (BL1202021933G) | |Dscott 23 Apr 2012 |- |style='background-color:#c00;'| nok |SanDisk |SDHC |16 |6 |Ultra I (BL1205921933G) |Boots kernel but won't run init (mmc timeout waiting for interrupt) |SnarlingFox 10 May 2012 |- |style='background-color:#c00;'| nok |SanDisk |SDHC |16 |6 |Extreme |(man:0x000003 oem:0x5344 name:SD16G hwrev:0x8 fwrev:0x0), boots, (mmc0: timeout waiting for hardware interrupt, followed by continuous I/O errors, timeouts, etc), 2013-02-09-wheezy-raspbian |Bernard Ladenthin 12 Mar 2013 |- |style='background-color:#0a0;'| ok |SanDisk |SDHC |16 |10 |Extreme (45MB/s U1)(BL1203322025G), (30MB/s HD Video)(SDSDX3-016G-X46), (45MB/s U1)(BL1203322025G) |Doesn't work with debian6-19-04-2012 image, but does work with 2012-06-18-wheezy-beta.img and updated firmware (tested 2012-07-02). Danbowes: Working with latest RaspBMC image (tested 12/09/2012) |Flatline403 12 May 2012, Dkleeman 13 Jun 2012, Zbyszek 2 Jul 2012, Danbowes 13 Sep 2012 |- |style='background-color:#0a0;'| ok |SanDisk |SDHC |16 |10 |Extreme Pro SDSDXPA-016G-A75 (95MB/s UHS-I) |Doesn't work with stock debian6-19-04-2012 image, but does work with freshly compiled kernel |AXon 26 May 2012 |- |style='background-color:#0a0;'| ok |SanDisk |SDHC |16 |10 |Ultra(30MB/s) (SDSDU-016G-U46) (SDSDU-016G-U46S) |Works with debian6-19-04-2012 (Misox12). Kernel Panic with debian6-19-04-2012. Worked fine with Wheezy image (Casestudies). Works fine with Raspbian Wheezy 2013-02-09, man:0x000003 oem:0x5344 name:SU16G hwrev:0x8 fwrev:0x0 (Fraoch). |Misox12 30 May 2012, Casestudies 30 Jun 2012, Fraoch 25 March 2013 |- |style='background-color:#0a0;'| ok |SanDisk |microSDHC |16 |10 |Ultra microSDHC I UHS-I |man:0x000003 oem:0x5344 name:SU16G hwrev:0x8 fwrev:0x0. Works again since raspberrypi-firmware 20130116 in archlinux-arm. write 6.8 MB/s, read 21.0 MB/s |fiodschi, 19 Jan 2013 |- |style='background-color:#0a0;'| ok |SanDisk |SDHC |16 |10 |EXTREME SDHC UHS-I (SDSDX-016G-X46) |Works with Raspbian “wheezy” and works with OpenELEC |Fazdogg 08 Jan 2013; Shadyeglenn 14 Feb 2013 |- |style='background-color:#0a0;'| ok |SanDisk |SDHC |32 |4 | | |Daviewales 30 May 2012 |- |style='background-color:#0a0;'| ok |SanDisk |SDHC |32 |6 | | |Helpme1986 22 Apr 2012 |- |style='background-color:#0a0;'| ok |SanDisk |SDHC |32 |10 |Extreme (45MB/s UHS-I) (SDSDX-032G-X46) |works with arch-04-29-image and latest firmware (booting problems without firmware update) / works with debian wheezy kernel 3.2.27+ (jLo) |Malhelo 8 Jun 2012 / jLo 2 Jan 2013 |- |style='background-color:#0a0;'| ok |SanDisk |SDHC |32 |10 |Ultra (30 MB/s) |Works with debian6-19-04-2012 Works with 2014-01-07-wheezy-raspbian |Pnppl 11 Jun 2012 Sheegoth on 12 Feb 2014 |- |style='background-color:#0a0;'| ok |SanDisk |SDHC |32 |10 |Elevate (30 MB/s) SDSDU-032G-T11 |Works with 2012-12-16-wheezy-raspbian |bderry71 08 Jan 2013 |- |style='background-color:#0a0;'| ok |SanDisk |SDXC |64 |10 |Extreme (SDSDX-064G-X46) |45 MB/s UHS-I: works with 2012-07-15-wheezy-raspbian |Cracki 10 Aug 2012 |- |style='background-color:#0a0;'| ok |SanDisk |SDXC |64 |10 |Ultra SDXC UHS-I FFP (3A114807) | |Zagblorg 26 Jul 2012 |- |style='background-color:#0a0;'| ok |SanDisk |microSDHC |4 |2 | |with SanDisk microSD to SD adapter |Rew 24 Apr 2012 |- |style='background-color:#0a0;'| ok |SanDisk |microSDHC |4 |4 | |with SanDisk microSD to SD adapter |Sleepy 1 May 2012 |- |style='background-color:#c00;'| nok |SanDisk |microSDHC |4 |6 |Mobile Ultra |Boots kernel but won't run init (mmc timeout waiting for interrupt) - Jens Pedersen / (tried 15-06-2012 with kernel 19-04-2012) error -84 transferring data, kernel panic: no init found - Wieltje |Jens Pedersen 8 May 2012, Wieltje 15 Jun 2012 |- |style='background-color:#0a0;'| ok |SanDisk |microSDHC |8 |2 | | |Fjen 12 May 2012 |- |style='background-color:#0a0;'| ok |SanDisk |microSDHC |8 |4 | |with SanDisk microSD to SD adapter |Md84419 21 Apr 2012 |- |style='background-color:#0a0;'| ok |SanDisk |microSDHC |8 |4 |SDSDQM-008G-B35 |man:0x000003 oem:0x5344 name:SU08G hwrev:0x8 fwrev:0x0 |jonasbits 12 Sept 2013 |- |style='background-color:#c00;'| nok |SanDisk |microSDHC |8 |6 |Mobile Ultra (SDSDQY-008G-U46A) |working with the latest firmware, won`t reboot when it`s hot |Sorinm 17 May 2012 |- |style='background-color:#0a0;'| ok |SanDisk |microSDHC |8 |10 |Ultra (SDSDQU-008G-U46) 30 MB/s |tested and working on Raspbian wheezy (and RaspBMC) |Pepindur 11 Sep 2012 |- |style='background-color:#c00;'| ok |SanDisk |microSDHC |16 |4 | |(man:0x000003 oem:0x5344 name:SU16G hwrev:0x8 fwrev:0x0), with microSD to SD adapter, boots, (mmc0: timeout waiting for hardware interrupt, followed by continuous I/O errors, timeouts, etc), 2013-02-09-wheezy-raspbian |Bernard Ladenthin 12 Mar 2013 |- |style='background-color:#0a0;'| ok |SanDisk |microSDHC |16 |10 |Mobile Ultra (SDSDQUA-016G-U46A) |working with the latest firmware |Mengineer 25 Aug 2012 |- |style='background-color:#0a0;'| ok |SanDisk |microSDHC |32 |4 | | |Sherman 19 Jul 2012 |- |style='background-color:#0a0;'| ok |SanDisk |microSDHC |32 |10 |SDSDQU-032G-U46A |archlinux-hf-2013-02-11 |pAIgn10 6 Jun 2013 |- |style='background-color:#0a0;'| ok |SanDisk |microSDXC |64 |6 |SDSDQY-064G-A11A |boots up much more consistently with latest firmware |LastSilmaril 23 May 2012 |- |style='background-color:#c00;'| nok |SanDisk |miniSDHC |2 | |Ultra II miniSD. BE07107FJE |Doesn't boot |Pe7er 18 Mar 2013 |- |style='background-color:#c00;'| nok |SanDisk |SDXC |128 |10 |Extrem 45MB/s |Don't work (Tested on Two) |OTHMAN 2014 02 10 |- |style='background-color:#0a0;'| ok |SCT |SDXC |64 |10 |STC SM649A-130125 |2013-02-09-wheezy-raspbian.img, booted cleanly, installed LibreOffice OK |Lanulos 29 Mar 2013 |- |style='background-color:#0a0;'| ok |Silicon Power |SDHC |8 |10 |SP008GBSDH010V10 |Works fine 2012-12-16-wheezy-raspbian.img - Tested 14/01/2013 |Thenix 14 Jan 2013 |- |style='background-color:#c00;'| nok |Silicon Power |SDHC |8 |10 |SP008GBSDH010V10 |Boots kernel but won't run init (mmc timeout waiting for interrupt ) - Tested 20/11/2012, 2012-10-28-wheezy-raspbian.img with Nov 20 kernel |Xthexder 21 Nov 2012 |- |style='background-color:#0a0;'| ok |Silicon Power |SDHC |16 |6 |SP016GBSDH006V10 | |Valery 05 Apr 2013 |- |style='background-color:#0a0;'| ok |Silicon Power |SDHC |16 |10 |SP016GBSDH010V10 | |Xthexder 21 Nov 2012 |- |style='background-color:#c00;'| nok |Silicon Power |SDHC |32 |6 |LS2N732GQON03ASP |boots debian6-19-04-2012.img, but frequent slow response / system hangs |Michthom 21 Jun 2012 |- |style='background-color:#0a0;'| ok |Silicon Power |microSDHC |4 |6 |SP004GBSTH006V10-SP | |Csgabe 19 May 2012 |- |style='background-color:#0a0;'| ok |Silicon Power |microSDHC |8 |10 |S608G1202 | |Blutme 17 Aug 2012 |- |style='background-color:#0a0;'| ok |Silicon Power |microSDHC |16 |10 |SP016GBSDH010V10 | |Jamesnine 10 Jun 2012 |- |style='background-color:#0a0;'| ok |Sony |SDHC |4 |4 |SF-4B4, SF-4N4 |(Write 6MB/s, Read 20MB/s) |Krischaplin 7 May 2012 |- |style='background-color:#0a0;'| ok |Sony |SDHC |4 |10 |UHS-1 40MB/s SF-4UY man:0x000027 oem:0x5048 name:SD04G hwrev:0x3 fwrev:0x0 |Perfect with Raspbian. With openELEC I get warnings in the logs (mmc0: DMA IRQ 6 ignored - results were reset - mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignoring it) (Write 10,3MB/s, Read 18,8MB/s) |Knopfler19 20 Jun 2013 |- |style='background-color:#0a0;'| ok |Sony |SDHC |8 |4 | |(Write 11.8MB/s, Read 17.4MB/s) |Slabua 9 Aug 2012 |- |style='background-color:#0a0;'| ok |Sony |SDHC |8 |10 |UHS-1 SF8UX |Write 17.2 MB/s, Read 20.8 MB/s, Raspbian works while image copied using windows |Regi24 29 Dec 2012, Hariram April 12, 2013, Hareesh G S June 6, 2013 (Openelec Image) |- |style='background-color:#0a0;'| ok |Sony |SDHC |8 |10 |UHS-1 90MB/s SF-8UX man:0x000082 oem:0x4a54 name:NCard hwrev:0x0 fwrev:0x0 |Perfect with Raspbian. With openELEC I get warnings in the logs (mmc0: DMA IRQ 6 ignored - results were reset - mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignoring it) (Write 16,9 MB/s, Read 21,1 MB/s) |Knopfler19 20 Jun 2013 |- |style='background-color:#0a0;'| ok |Sony |SDHC |8 |10 |UHS-I SF-8UY/TQ1 man:0x000082 oem:0x4a54 name:NCard hwrev:0x0 fwrev:0x2 |Works fine with Raspbian. (Write 13.37 MB/s, Read 20.93 MB/s) |c5jirzex52xx, 18 Nov 2013 |- |style='background-color:#0a0;'| ok |Sony |SDHC |16 |10 |UHS-1 |Works well with Raspian. |Bafeigum 23 Aug 2013 |- |style='background-color:#0a0;'| ok |Sony |SDHC |32 |10 |SF-32NX/TQ |Max read speed of ~94 MB/s, min write speed of ~10 MB/s) - Works with archlinuxarm-29-04-2012 dd image with latest firmware update (as of 10-06-2012) |Chbg 13 Jun 2012 |- |style='background-color:#0a0;'| ok |Sony |SDHC |32 |10 |SF-32UY/TQ1, SF-32UY/TQMN (40 MB/s) |Works with archlinux-hf-2013-02-11 (also after full update) - as of 04-08-2013) |Tigran 09 April 2013 |- |style='background-color:#0a0;'| ok |Sony |SDHC |32 |10 |SF-32UY/TQ1, UHS-I (40 MB/s) |Works with Raspbmc, OpenELEC (Frodo and Gotham test builds), and NOOBS. Tested throughput: Seq Read: 87.2MB/sec Seq Write: 20.4MB/sec Random Read: 78.3MB/sec Random Write: 19.9MB/sec |JoeSchmuck 13 July 2013 |- |style='background-color:#0a0;'| ok |Strontium |SDHC |8 |10 |SD-T08G 1045 US6923 G (White Shell - SKU 8 886450 703492) | |Ssb 25 Jul 2012 |- |style='background-color:#0a0;'| ok |Super Talent |SDHC |32 |10 |SDHC32-C10 SKU: 116-557-001 |works with Raspbmc RC4 and 2012-07-15-wheezy-raspbian |Drroller 14 Aug 2012 |- |style='background-color:#0a0;'| ok |TakeMS |microSDHC |4 |4 | |with TakeMS adapter |Delboy0 31 May 2012 |- |style='background-color:#0a0;'| ok |TakeMS |SDXC |64 |10 | |overclock turbo model B works |select 02 June 2013 |- |style='background-color:#0a0;'| ok |TDK |SDHC |4 |4 |1008WW5261B | |Pluggster 17 May 2012 |- |style='background-color:#0a0;'| ok |TDK |SDHC |2 x 4 |4 |80-56-10275-004G |Debian works, mmc0 errors when booting Fedora |Melikescheese 27 May 2012 |- |style='background-color:#0a0;'| ok |TDK |SDHC |4 |6 |S404G1113 |Works with Debian Wheezy (2012-06-18 beta) |Dcuk 26 Jun 2012 |- |style='background-color:#c00;'| nok |TDK |SDHC |4 |6 |S404G1041, S404G1046 |end May 2012, new kernel.img and start.elf, won't run init. 4 Jun 2012, debian6-19-04-2012.img, replacement kernel.img and start.elf from github. Got Error -84 and Kernel panic - not syncing: No init found |Ceptimus 2 Jun 2012, Norbini 4 Jun 2012 |- |style='background-color:#0a0;'| ok |TDK |microSDHC |4 |4 |with Adapter (80-56-10301-004G) | |Norbini 4 Jun 2012 |- |style='background-color:#0a0;'| ok |TDK |microSDHC |8 |10 | |Works with Raspbian 2012-07-15 |Backeby 20 Jul 2012 |- |style='background-color:#0a0;'| ok |TOPRAM |SDHC |8 |6 |TRSD8GC6 |Works with OpenELEC (Frodo and Gotham test builds), did not test on anything else yet. Tested throughput: Seq Read: 43.9MB/sec

Seq Write: 18.8MB/sec Random Read: 41.8MB/sec Random Write: 17.6MB/sec |JoeSchmuck 13 July 2013 |- |style='background-color:#0a0;'| ok |Toshiba |SDHC |4 |4 |SD-K04G(1201 W12338 N) (labelled as Fujifilm SHDC 4GB class 4) |Tested with Raspbian 2013-11-18. Speed is 5MB/s write (1GB file) |captaindangeax 18 nov 2013 |-

|style='background-color:#0a0;'| ok |Toshiba |SDHC |8 |4 |SD-K08G(1223 W17218 P) |Tested with Raspbian 2012-12-16. Speed is 4MB/s write |rendyair 16 Jan 2013 |- |style='background-color:#0a0;'| ok |Toshiba |SDHC |16 |10 |SD-T16G(1046 US7022 C) | |Yang 5 Sep 2012 |- |style='background-color:#0a0;'| ok |Toshiba |microSDHC |8 |? |SD-C08GJ(BL3A) |with adapter |Jannis 15 May 2012 |- |style='background-color:#0a0;'| ok |Toshiba |SDHC |32 |10 |SD-K032GR7AR30 (30MB/s) |Works with NOOBS. |OTHMAN 2014.02.14 |- |style='background-color:#c00;'| nok |Transcend |SD |2 |? |6451AG 2G O2DS1 | |MaWe 13 Aug 2012 |- |style='background-color:#0a0;'| ok |Transcend |SDHC |4 |4 |TS4GSDHC4 - BH1130821915G | we've found these to work without any errors and offer reasonable performance |RasMyra 12 Apr 2012 |- |style='background-color:#0a0;'| ok |Transcend |SDHC |4 |6 |TS4GSDHC6 |no problems (does not work with Raspbmc as of 1 Jun 2012 - 321liftoff) |LakesGeek 23 Apr 2012 |- |style='background-color:#0a0;'| ok |Transcend |SDHC |4 |10 |TS4GSDHC10 |Works fine running Raspbian and OpenELEC. Tested various cards from different batches. |Kiwisol 27 Oct 2013 |- |style='background-color:#c00;'| nok |Transcend |SDHC |4 |10 |TS4GSDHC10E, TS4GSDHC10 |Corrupted when card image back up made mmc0: resetting ongoing cmd 25dma before 4096/4096 [1]/[1] complete mmc0: Timeout waiting for hardware interrupt - cmd12 mmcblk0: error -110 sending stop comment, original cmd response 0x900, card status 0xe00 |Mfg 3 Jun 2012, Thenix 14 Jan 2013, Fazz 04 Oct 2013 |- |style='background-color:#0a0;'| ok |Transcend |microSDHC |8 |10 |TS8GUSDHC10 | | Za Bullet 18 May 2013 |- |style='background-color:#0a0;'| ok |Transcend |SDHC |8 |10 |TS8GSDHC10E |man:0x00001b oem:0x534d name:00000 hwrev:0x1 fwrev:0x0 | jmarin 22 April 2013 |- |style='background-color:#0a0;'| ok |Transcend |SDHC |8 |4 |TS8GSDHC4 |(man:0x000003 oem:0x5344 name:SD08G hwrev:0x8 fwrev:0x0) - works with both Debian "squeezy" and Raspbian "wheezy" distributions (Hedj) |Attila.afra 25 Apr 2012, Hedj 24 Jul 2012 |- |style='background-color:#0a0;'| ok |Transcend |SDHC |8 |6 |TS8GSDHC6-P2 - MMBFG08GWACA-M6 |~5.8 MB/s read/write following the Performance below |Md84419 5 Nov 2011 |- |style='background-color:#0a0;'| ok |Transcend |SDHC |8 |10 |TS8GSDHC10 | |Selsinork 26 Apr 2012 |- |style='background-color:#0a0;'| ok |Transcend |SDHC |8 |10 |TS8GSDU1 UHC-I X300 |Arch read/write 20,9/13,1 MB/s |30 Aug 2013 |- |style='background-color:#0a0;'| ok |Transcend |SDHC |8 |10 |TS8GSDHC10U1 UHC-I X600 |Arch read/write 21,1/15 MB/s |30 Aug 2013 |- |style='background-color:#0a0;'| ok |Transcend |SDHC |16 |4 |TS16GSDHC4 |Tested with Raspbian 2014-12-30 |Fmondada 2 Jan 2014 |- |- |style='background-color:#0a0;'| ok |Transcend |SDHC |16 |6 |TS16GSDHC6 | |Bullace 18 May 2012 |- |style='background-color:#0a0;'| ok |Transcend |SDHC |16 |10 |TS16GSDHC10 / TS16GSDHC10E | |Rew 18 Apr 2012 |- |style='background-color:#0a0;'| ok |Transcend |SDHC |16 |10 |TS16GSDHC10 / TS16GSDHC10E | Read:18.4 MB/s Write:12.1 MB/s (man:0x000074 oem:0x4a45 name:SDC hwrev:0x0 fwrev:0x2) |Sam2 01 Feb 2014 |- |style='background-color:#0a0;'| ok |Transcend |SDHC |16 |10 |TS16GSDU1 | Read:18.4 MB/s Write:12.1 MB/s, (man:0x000074 oem:0x4a45 name:SDU1 hwrev:0x0 fwrev:0x2) |Sam2 01 Feb 2014 |- |style='background-color:#0a0;'| ok |Transcend |SDHC |16 |10 |TS16GSDHC10 9173BA-16G-09DS2 | works |Epa 20130304. package had "83-3432 V5.1" behind it. |- |style='background-color:#c00;'| nok |Transcend |SDHC |16 |10 |TS16GSDHC10U1 |Doesn't Boot, show that "kernel panic - not syncing attempted to kill init" |Khfung02 13 Sep 2012 |- |style='background-color:#0a0;'| ok |Transcend |SDHC |16 |10 UHS-1 |TS16GSDHC10U1 |Works with Occidentals 0.2 from Adafruit, read and write about 15 MB/s, didn't test other versions. |aevh 18 Feb 2013 |- |style='background-color:#0a0;'| ok |Transcend |SDHC |32 |10 |TS32GSDHC10, TS32GSDHC10E | |Vakya 29 May 2012 |- |style='background-color:#c00;'| nok |Transcend |microSDHC |2 |? |MMAGR02GUECA-MB |reads fine initially after image was written on a PC, gives mmc0 timeout errors reading back data after writing a large amount (in this case with 'pacman -Syu'). Still seems to work, but is *very* slow after this happens, even across reboots |Malvineous 16 Jun 2012 |- |style='background-color:#c00;'| nok |Transcend |microSDHC |32 |? |TS32GUSDHC4 |Doesn't boot |Piponazo 7 Aug 2012 |- |style='background-color:#c00;'| nok |Transcend |microSDHC |32 |10 |TS32GUSDHC10 |(man:0x00001b oem:0x534d name:00000 hwrev:0x1 fwrev:0x0), with microSD to SD adapter, boots, (mmc0: timeout waiting for hardware interrupt, followed by continuous I/O errors, timeouts, etc), 2013-02-09-wheezy-raspbian |Bernard Ladenthin 12 Mar 2013 |- |style='background-color:#0a0;'| ok |Transcend |microSDHC |32 |10 |TS32GUSDU1 |Works with 2013-02-09-wheezy-raspbian |Neurolit 15 Apr 2013 |- |style='background-color:#0a0;'| ok |Transcend |SDXC |64 |10 |TS64GSDXC10 | |Country 26 Jun 2012 |- |style='background-color:#0a0;'| ok |Traveller |SDHC |4 |? |High Speed |Works with raspbian |Sega dude 28 Jul 2012 |- |style='background-color:#0a0;'| ok |V-Gen |microSDHC |8 |? | |No problems.(man:0x000073 oem:0x4247 name:NCard hwrev:0x1 fwrev:0x0). Tested with Raspbian Wheezy & Raspbmc |Rendyair 11 Sep 2012 |- |style='background-color:#c00;'| nok |Veho |SDHC |4 |6 | | |Spaaa 5 Jun 2012 |- |style='background-color:#0a0;'| ok |Veho |SDHC |8 |6 |Ultra fast |(man:0x00001b oem:0x534d name:00000 hwrev:0x1 fwrev:0x0) 7.8Mb/s. Slow but tested with Arch Linux |Johnlane 28 Jul 2012 |- |style='background-color:#0a0;'| ok |Verbatim |SDHC |8 |10 |43961 | |Petacz 13 Aug 2012 |- |style='background-color:#0a0;'| ok |Verbatim |SDHC |8 |10 |Premium |Tested with 2013-02-09 release of Raspbian Wheezy and Rasplex 0.1.37 - blue plastic version |Jahislove 11 may 2013 |- |style='background-color:#0a0;'| ok |Verbatim |SDHC |8 |6 |Premium |Tested with 2014-02-17 release of Raspbian Wheezy |talbots 17 feburary 2013 |- |style='background-color:#c00;'| nok |Verbatim |SDHC |8 |6 |Go |tested with NOOBS 1.3.2 and Raspbian Wheezy 2013-09-25; mmc0: timeout waiting for hardware interrupt |marcel.kolaja 12 Dec, 2013 |- |style='background-color:#c00;'| nok |Verbatim |SDHC |8 |10 |Premium PSF8GSDHC10-PC |Tested with September release of Raspbian and Debian Wheezy - both fail to boot with mmc errors, confirmed fail with this black plastic version (may 2013) |XQx 31 Oct 2012 , confirmed Jahislove 11 may 2013 |- |style='background-color:#0a0;'| ok |Verbatim |SDHC |16 |4 |44020 | |Adelahunty 22 Nov 2012 |- |style='background-color:#c00;'| nok |Verbatim |SDHC |16 |6 |47178 |Raspbian Pisces RC3 - boots, but after login: mmc timeout waiting for interrupt |Razzda 15 Jul 2012 |- |style='background-color:#c00;'| nok |Verbatim |SDHC |16 |10 |13762 |mmc timeout |Epa 20130304 |- |style='background-color:#0a0;'| ok |Verbatim |SDHC |16 |10 |43962 | |Klass 24 Jun 2012 |- |style='background-color:#0a0;'| ok |Verbatim |SDHC |32 |6 |44032 | |Jarip 14 Jul 2012 |- |style='background-color:#c00;'| nok |Verbatim |microSDHC |8 |10 |44012 |ArchLinux - boots, but after system update develops segmentation faults |John.glasson 29 Jul 2012 |- |style='background-color:#c00;'| nok |Verbatim |SDHC |8 |10 |43961 |Raspbian - installs it but doesn't boot, repeatedly prints: 'timeout waiting for hardware interrupt' |Gkontadakis 31 Aug 2013 |- |style='background-color:#0a0;'| ok |Verbatim |microSDHC |16 |4 | |Tested with 2013-02-09-wheezy-raspbian - works without any problem |J3rGuS 19 March 2013 |- |style='background-color:#0a0;'| ok |Walgreens Photo |SD |1 |? | |Works with raspbmc, have not tested others |Sp00l 21 Jul 2012 |- |style='background-color:#0a0;'| ok |Walgreens Photo |SD |2 |? | |Works with raspbian, have not tested others |Sega dude 27 Jul 2012 |}

Performance

The following results have been reported by Users.

Terminal Commands

To obtain the results in the table, type the following lines at a command prompt. If you are running the GUI windows, open the Terminal application.

The dd command is the Linux block copy command. It reads from the if= file, in the first case a block of zeros, and writes to the of= file, in the first case the file named test.tmp in your HOME directory (the ~/ means your HOME directory). The bs= gives the size of the data, and the count= gives the number of times this is repeated. sync ensures that the filesystem cache is flushed to have more realistic data. Please run it multiple times, one sample is not scientific enough.

Write speed

sync; time dd if=/dev/zero of=~/test.tmp bs=500K count=1024; time sync

Read speed

dd if=~/test.tmp of=/dev/null bs=500K count=1024

Delete the temporary file

rm ~/test.tmp

Kernel version

uname -a

External Benchmarks

Is this reliable?

SD cards are given a rating (Class) by the manufacturers; the higher the rating the quicker the card. SD cards are usually used in a camera. The camera usually writes a block of data (a picture), then writes another. The SD card is tuned for this type of use. When used in the Raspberry Pi the data is written and read a lot more frequently, and from differing locations on the card. This difference in use means the manufacturers rating may not be as applicable for the Raspberry Pi.

SD card performance

The table can be sorted using the triangles in the top row. Please add entries in the correct location, so that the initial sort is by Manufacturer, Size, Type and Class

SD Card Read (MB/s) Write (MB/s) Distro Kernel Notes
ADATA 8GB SDHC Class 10 (ASDH8GCL10-R) 19.6 18.8 2012-08-04 Debian Wheezy "Raspbian" Linux raspberrypi 3.1.9+ #168 PREEMPT Sat Jul 14 18:56:31 BST 2012 armv6l GNU/Linux
ADATA 8GB SDHC Class 10 (ASDH8GCL10-R) 18.2 12.4 2012-12-16 Debian Wheezy "Raspbian" Linux raspberrypi 3.2.27+ #250 PREEMPT Thu Oct 18 19:03:02 BST 2012 armv6l GNU/Linux
ADATA 16GB SDHC Class 10 19.5 16.9 2012-06-13 Arch Linux ARM Linux alarmpi 3.2.27+ #60 PREEMPT Thu Aug 23 15:33:51 BST 2012 armv6l GNU/Linux
ADATA 16GB SDHC Class 10 17.8 11.2 Debian Wheezy "Raspbian" Linux raspberrypi 3.10.24+ #610 PREEMPT Thu Dec 12 13:12:09 GMT 2013 armv6l GNU/Linux man:0x00001d oem:0x4144 name:SD hwrev:0x1 fwrev:0x0
ADATA 16GB SDHC Class 10 (ASDH16GUICL10-R) 18.5 9.9 archlinux-hf-2013-11-14 Linux alarmpi 3.10.25-1-ARCH #1 PREEMPT Mon Dec 23 16:07:25 MST 2013 armv6l GNU/Linux
ADATA 16GB SDHC Class 10 (ASDH16GUICL10-R) 18.4 16.06 2014-01-07-wheezy-raspbian Linux raspberrypi 3.10.25+ #622 PREEMPT Fri Jan 3 18:41:00 GMT 2014 armv6l GNU/Linux Fresh install
ADATA 32GB SDHC Class 10 (ASDH32GCL10-R) 20.1 6.4 2012-06-18-wheezy-beta Linux raspberrypi 3.1.9+ #152 PREEMPT Fri Jul 6 18:47:16 BST 2012 armv6l GNU/Linux
AmazonBasics SDHC Class 10 8GB 19.3 8.6 Debian Wheezy "Raspbian" Linux massah 3.1.9+ #168 PREEMPT Sat Jul 14 18:56:31 BST 2012 armv6l GNU/Linux
AmazonBasics SDHC Class 10 8GB 17 9.4 Debian Wheezy "Raspbian" Linux massah 3.1.9+ #202 PREEMPT Wed Jul 25 22:11:06 BST 2012 armv6l GNU/Linux Same board and card as above, slightly newer kernel.
Emtec SDHC 8GB class 10 (EKMSD8G150XHC) 20.3 14.6 Debian Wheezy "Raspbian" Linux raspberrypi 3.2.27+ #250 PREEMPT Thu Oct 18 19:03:02 BST 2012 armv6l GNU/Linux Turbo mode = High (950/250/450MHz)
Extrememory SDHC 16GB class 10 4.7 4.5 Debian Wheezy "Raspbian" Linux raspbian 3.1.9+ #52
Extrememory SDHC 16GB class 10 11.3 5.4 Debian Wheezy "Raspbian" Linux raspbian 3.1.9+ #101 init_emmc_clock=200000000 in config.txt
Extrememory SDHC 16GB class 10 18.2 6.3 Debian Wheezy "Raspbian" Linux raspbian 3.1.9+ custom kernel and firmware as of 17.06.2012, no extra option in config.txt
Extrememory SDHC 16GB class 10
(man:0x000012 oem:0x3456 name:F0F0F hwrev:0x1 fwrev:0x0)
16.9 10.7 archlinuxarm-13-06-2012 Linux alarmpi 3.1.9-25-ARCH+ #1 PREEMPT
Extrememory SDHC 32GB class 10
(man:0x000003 oem:0x5344 name:SMI hwrev:0x1 fwrev:0x0)
18.7 16.5 archlinuxarm-13-06-2012 Linux alarmpi 3.1.9-25-ARCH+ #1 PREEMPT
Farnell Branded (Samsung) SDHC 4GB Class 4 (MMBTF04GWBCA-ME) 20.1 6.9 Debian Wheezy Raspbian Linux raspbian 3.1.9+ #168 Pi overclocked to 900 Mhz arm_freq and 500 Mhz sdram_freq
Fugi SDHC 32GB class 10 (P10NM00580A) 12.7 19.8 Debian Wheezy Raspbian Linux raspbian 3.1.9+ #168 man:0x000073 oem:0x4247 name:NCard hwrev:0x1 fwrev:0x0
GoodRAM SDHC 16GB Pro class 10 (SDC16GHC10PGRR9) 19.4 18.0 Debian Wheezy Raspbian Linux raspbian 3.1.9+ #272
Integral SDHC 16GB class 10 17.7 19.6 Debian Wheezy Raspbian Linux raspbian 3.1.9+ #168
Kingmax 8GB microSDHC Class 4 (KM08GMCSDHC41A) 13.6 3.7 Debian Wheezy Raspbian Linux 3.1.9+ #242 PREEMPT Wed Aug 1 19:47:22 BST 2012
Kingston SDHC 4GB class 4 4.5 4.1 Debian Squeeze "debian6-19-04-2012" Linux raspberrypi 3.1.9+ #52 Tue May 8 23:49:32 BST 2012
Kingston SDHC 4GB class 4 4.2 2.5 archlinuxarm-19-04-2012 Linux alarmpi 3.1.9-13+ #6 Thu May 10 00:48:37 UTC 2012 Identical card to one above. One to look into, as I was expecting Arch to be faster...
Kingston uSDHC 4GB class 4 4.0 3.8 Debian Squeeze Linux 3.1.9+ #90
Kingston uSDHC 8GB class 4 (SDC4/8GB) 4.7 3.7 archlinuxarm-29-04-2012 Linux alarmpi 3.1.9+ #66 Thu May 17 16:56:20 BST 2012 CrystalDiskMark results (FAT32) This is my only card that can be counted on to boot up on each plug-in.
Kingston microSDHC 16GB class 4 17.1 5.1 2013-02-09 Debian Wheezy "Raspbian" Linux raspberrypi 3.6.11+ #371 PREEMPT Thu Feb 7 16:31:35 GMT 2013 armv6l GNU/Linux
Kingston microSDHC 16GB class 10 20.1 13.4 2013-02-09 Debian Wheezy "Raspbian" Linux raspberrypi 3.6.11+ #371 PREEMPT Thu Feb 7 16:31:35 GMT 2013 armv6l GNU/Linux
Kingston SDHC 8GB Class 4 (SD4/8GB) 16.2 5.2 2013-12-20 Debian Wheezy "Raspbian" Linux RaspberryPi 3.10.24+ #614 PREEMPT Dec 19 20:38 GMT 2013 armv6L GNU/Linux
Kingston SDHC 8GB class 4 (SD4/8GB) 4.6 3.0 archlinuxarm-29-04-2012 Linux alarmpi 3.1.9+ #66 Thu May 17 16:56:20 BST 2012 CrystalDiskMark results (FAT32)
Kingston SDHC 8GB class 4 (SD4/8GB) 13.2 3.4 Hexxeh Raspbian r3 Linux raspbian 3.1.9+ #202 PREEMPT Wed Jul 25 22:11:06 BST 2012 armv6l GNU/Linux man:0x000002 oem:0x544d name:SA08G hwrev:0x1 fwrev:0x0
Kingston SDHC 8GB Class 10 (SD10V/8GB) 16.2 9.9 2013-12-20 Debian Wheezy "Raspbian" Linux RaspberryPi 3.10.24+ #614 PREEMPT Dec 19 20:38 GMT 2013 armv6L GNU/Linux
Kingston SDHC 32GB class 10 10.8 8.1 Fedora 17 ARM snapshot 07 May 2012 Linux fedora-arm 3.1.9 #1 mmc0: note - long write sync 1453000ns - 14608 its. - kernel/module problems?
Kingston SDHC 32GB class 10 4.7 4.1 Fedora 17 ARM nightly snapshot Linux fedora-arm 3.1.9+ #101 PREEMPT Mon Jun 4 17:19:44 BST 2012 custom kernel from raspberrypi github - no more mmc0 sync problems
Kingston SDHC 32GB class 10 4.6 3.5 Debian Squeeze "debian6-19-04-2012" Linux raspberrypi 3.1.9+ #90
Lexar Platinum II SDHC 8GB Class 10 UHS-I 18.5 9.1 2013-12-20 Debian Wheezy "Raspbian" Linux RaspberryPi 3.10.24+ #614 PREEMPT Dec 19 20:38 GMT 2013 armv6L GNU/Linux
Noname uSDHC 16GB class 4 18.5 2.6 Raspmc Linux raspbmc 3.2.27 #1 PREEMPT Mon Nov 5 20:50:02 UTC 2012 armv6l GNU/Linux
Panasonic SDHC 8GB class 6 4.8 4.4
Panasonic SDHC 8GB class 4 11.1 9.7 Debian Wheezy "Rasbpian" Linux rpi 3.1.9+ #168 PREEMPT Sat Jul 14 18:56:31 BST 2012 armv6l GNU/Linux
Platinum SDHC 8GB class 10 14.9 13.9 Arch Linux ARM "hf-2013-02-11" Linux alarmpi 3.6.11-9-ARCH+ #1 PREEMPT Sat Mar 30 02:38:20 UTC 2013 armv6l GNU/Linux
Patriot microSDHC 16GB Class 10 (PSF16GMSHC10) 9.5 5.2 Fedora 14 Linux raspi 3.1.9+ #101 init_emmc_clock=200000000 in config.txt
Patriot SDHC 16GB Class 10 (PSF16GSDHC10) 19.3 9.3 Debian Wheezy "Rasbpian" Linux raspberrypi 3.1.9+ #168 PREEMPT Sat Jul 14 18:56:31 BST 2012 armv6l GNU/Linux
Patriot SDHC 32GB Class 10 UHS-1 (PEF32GSDHC10U1) 20.4 12.1 Debian Wheezy "Rasbpian" Linux raspberrypi 3.1.9+ #168 PREEMPT Sat Jul 14 18:56:31 BST 2012 armv6l GNU/Linux
Samsung SDHC 16GB Class 10 (MB-SPAGA) 10.7 8.8 Fedora 17 ARM snapshot 07 May 2012 - GUI release Linux fedora-arm 3.1.9 #1 Had "long write sync" errors, slow boot times and then system instability using USB port on Macbook, switched to iPhone charger (5V 1A) and warning disappeared
Samsung SDHC 16GB Class 10 (MB-SPAGA) 19.6 18.7 Debian Wheezy "Raspbian" Linux raspberrypi 3.1.9+ #168 PREEMPT Sat Jul 14 18:56:31 BST 2012 armvl GNU/Linux (Same user / card as above, definitely notable that Raspbian is superior)
Samsung SDHC 32GB Class 6 21.6 17.4 Debian Wheezy "Raspbian" Linux raspberrypi 3.6.11+ #474 PREEMPT Thu Jun 13 17:14:42 BST 2013 armv6l GNU/Linux -
Samsung microSDHC 16GB Class 10 (MB-MPAGA/US) 19.8 15.8 Debian Wheezy "Raspbian" Linux pisces 3.1.9+ #155 PREEMPT Mon Jul 9 12:49:19 BST 2012 armv6l GNU/Linux -
Samsung microSDHC 16GB Class 4 (MB-MS4GA/US) 19.2 5.5 Debian Wheezy "Raspbian" ? -
Samsung microSDHC 16GB Class 10 (MB-MPAGAEU) 21.7 11.2 Debian Wheezy "Raspbian" Linux raspberrypi 3.6.11+ #538 PREEMPT Fri Aug 30 20:42:08 BST 2013 armv6l GNU/Linux man:0x00001b oem:0x534d name:00000 hwrev:0x1 fwrev:0x0
512Mb version of Raspberry Pi
SanDisk Extreme III 2GB Class 10 (BE07054050838) 23.3 21.5 Raspbmc Linux raspbmc 3.2.27 #1 PREEMPT Mon Nov 5 20:50:02 UTC arm61 GNU/Linux 512Mb version of Raspberry Pi
SanDisk microSD 2GB 4.7 4.2 archlinuxarm-29-04-2012 Linux alarmpi 3.1.9+ #66 Thu May 17 16:56:20 BST 2012 CrystalDiskMark results (FAT32) Card has no serial/is likely a fake.
SanDisk Ultra SDHC 4GB class 4 4.7 4.4 Raspbian Wheezy Linux raspberry-pi 3.1.9+ #1 PREEMPT Wed Jun 6 16:26:14 CEST 2012 armv6l GNU/Linux man:0x000003 oem:0x5344 name:SD04G hwrev:0x8 fwrev:0x0
SanDisk Ultra II SDHC 4GB class 4 (15 MB/s) 20.9 14.6 Raspbian Wheezy Linux raspberry-pi 3.1.9+
SanDisk SDHC 8GB class 4 11.1 5.6 Raspbian Wheezy Linux raspberrypi 3.1.9+ #202 PREEMPT After Hexxeh rpi-update.
man:0x000003 oem:0x5344 name:SD08G hwrev:0x8 fwrev:0x0
SanDisk SDHC 4GB class 4 11.15 5.15 Raspbian Wheezy Linux raspberrypi 3.6.11+ #456 PREEMPT man:0x000003 oem:0x5344 name:SD04G hwrev:0x8 fwrev:0x0
SanDisk SDHC 8GB class 4 4.7 3.2 Debian Squeeze
SanDisk Ultra SDHC I 8GB class 6 "30MB/s*" 19.5 7.6 archlinuxarm 3.1.9-22-ARCH+ #1 PREEMPT Sun Jun 17 13:54:30 UTC 2012 "mmc0: error -84 whilst initialising SD card" at bootup, but works fine
SanDisk Ultra SDHC I 8GB class 10 "30MB/s*" 19.3 3.2 Raspbian Wheezy 3.1.9+ #168 PREEMPT Sat Jul 14 18:56:31 BST 2012
SanDisk Ultra SDHC I 8GB class 10 "30MB/s* (SDSDU-008G-UQ46)" 18.6 14.5 Raspbian GNU/Linux 7 (wheezy) Linux raspberrypi 3.10.21+ #604 PREEMPT Mon Dec 2 20:17:09 GMT 2013 armv6l GNU/Linux
SanDisk Ultra SDHC I 8GB class 10 "30MB/s*" 13.6 14.5 raspbmc rc3 Linux raspbmc 3.1.9-test-12-06 #1 PREEMPT Mon Jun 18 20:07:45 UTC 2012 armv6l GNU/Linux
SanDisk Ultra SDHC II 16GB class 2 "15MB/s*" 16.7 16.2 Raspbian Wheezy 3.1.9+ #168 PREEMPT Sat Jul 14 18:56:31 BST 2012 man:0x000003 oem:0x5344 name:SD16G hwrev:0x8 fwrev:0x0
SanDisk Ultra SDHC 16GB class 10 UHS-1 "30Mb/s" (SDSDU-016G-U46) 20.9 18.1 Raspbian Wheezy Linux raspberrypi 3.1.9+ #202 PREEMPT After Hexxeh rpi-update.
man:0x000003 oem:0x5344 name:SU16G hwrev:0x8 fwrev:0x0
SanDisk Ultra SDHC 16GB class 10 "30Mb/s" (SDSDU-016G-U46) 20.9 10.9 Raspbian Wheezy Linux raspberrypi 3.6.11+ #371 PREEMPT
SanDisk Ultra SDHC 16GB class 10 "30MB/s" (SDSDU-016G-U46S) 21.6 15.2 2013-02-09-wheezy-raspbian Linux raspberrypi 3.6.11+ #371 PREEMPT Thu Feb 7 16:31:35 GMT 2013 armv6l GNU/Linux man:0x000003 oem:0x5344 name:SU16G hwrev:0x8 fwrev:0x0
SanDisk Extreme SDHC I 4GB class 10 "30MB/s" 19.7 21.0 2012-07-15-wheezy-raspbian Linux raspberrypi 3.1.9+ #168 PREEMPT Sat Jul 14 18:56:31 BST 2012 armv6l GNU/Linux Only boots with images with new firmware, didn't boot with previous images.
SanDisk Extreme SDHC I 8GB class 10 "30MB/s" 17.7 19.7 Archlinuxarm 2012-06-13 Linux raspi 3.1.9-28-ARCH+ #1 PREEMPT Fri Jul 6 23:07:26 UTC 2012 armv6l GNU/Linux
SanDisk Extreme SDHC UHS-I 32GB class 10 "30MB/s" 21.4 / 18.4 19.5 / 22.2 2012-10-28-wheezy-raspbian Linux raspberrypi 3.2.27+ #250 PREEMPT Thu Oct 18 19:03:02 BST 2012 armv6l GNU/Linux
SanDisk microSDHC UHS-I 32GB class 10 "30MB/s" 21.1 10.9 2013-02-09 Debian Wheezy "Raspbian" Linux raspberrypi 3.6.11+ #371 PREEMPT Thu Feb 7 16:31:35 GMT 2013 armv6l GNU/Linux
SanDisk Extreme SDHC UHS-I 16GB class 10 "45MB/s" (SDSDX-016G-X46) 21.1 20.8 2012-09-18-wheezy-raspbian Linux raspberrypi 3.2.27+ #160 PREEMPT Mon Sep 17 23:18:42 BST 2012 armv6l GNU/Linux man:0x000003 oem:0x5344 name:SU16G hwrev:0x8 fwrev:0x0
SanDisk Extreme SDHC UHS-I 32GB class 10 "45MB/s" (SDSDX-032G-X46) 20.96 17.9 2013-05-20-wheezy-raspabian Linux raspberrypi 3.6.11+ #456 PREEMPT man:0x000003 oem:0x5344 name:SU32G hwrev:0x8 fwrev:0x0
SanDisk SDHC 32GB class 6 4.6 4.8
SanDisk uSDXC 64GB class 6 4.9 3.8 archlinuxarm-29-04-2012 Linux alarmpi 3.1.9+ #66 Thu May 17 16:56:20 BST 2012 CrystalDiskMark results (FAT32)
Silicon Power 8GB class 10 (SP008GBSDH010V10) 15.6 11.7 Debian Wheezy "Raspbian" (2012-12-16) Linux raspberrypi 3.2.27+ #250 PREEMPT Thu Oct 18 19:03:02 BST 2012 armv6l GNU/Linux
Sony 8GB class 10 (SF-8UY/TQ1) 20.9 13.4 Debian Wheezy "Raspbian" (2013-09-25) Linux raspberrypi 3.6.11+ #538 PREEMPT Fri Aug 30 20:42:08 BST 2013 armv6l GNU/Linux man:0x000082 oem:0x4a54 name:NCard hwrev:0x0 fwrev:0x2
TakeMS SDXC 64GB, Class 10 16.9 8.2 Debian Wheezy "Raspbian" (2013-06-02) Linux pisys 3.6.11+ #456 PREEMPT Mon May 20 17:42:15 BST 2013 armv6l GNU/Linux Pi B overclocked arm_freq=1000 core_freq=500 sdram_freq=600 over_voltage=6
TDK microSDHC 4GB, Class 4 (80-56-10301-004G) 11.2 4.7 Debian Wheezy "Raspbian" (2012-07-15) 3.1.9+ #168 PREEMPT Sat Jul 14 18:56:31 BST 2012
Toshiba SD-T16G SDHC 16GB, Class 10 (1046 US7022 C) 20.6 13.5 Debian Wheezy "Raspbian" 3.1.9+ #272 PREEMPT Tue Aug 7 22:51:44 BST 2012 armv6l GNU/Linux
Transcend SDHC 8GB Class 10 (TS8GSDHC10E) 22.2 17.1 2013-04-22 Raspbmc Linux raspbmc 3.6.11 #2 PREEMPT Wed Mar 13 17:12:47 UTC 2013 armv6l GNU/Linux Pi overclocked toarm_freq=840, core_freq=350, gpu_freq=253
Transcend microSDHC 8GB Class 10 (TS8GUSDHC10) 20.2 11.2 Debian Wheezy "Raspbian" Linux raspberrypi 3.1.9+ #272 PREEMPT Tue Aug 7 22:51:44 BST 2012 armv6l GNU/Linux
Transcend SDHC 8GB class 6 5.8 5.8
Transcend SDHC 8GB Class 6 (TS8GSDHC6) 4.6 4.0 Debian Squeeze "debian6-19-04-2012" Linux raspberrypi 3.1.9+ #90 Wed Apr 18 18:23:05 BST 2012 armv61 GNU/Linux Tested with dd. Card doesn't maintain the promised minimum class speed.
Transcend SDHC 8GB Class 4 (TS8GSDHC4) 11.1 8.1 Debian Wheezy "Rasbpian" Linux raspberrypi 3.1.9+ #168 PREEMPT Sat Jul 14 18:56:31 BST 2012 armv6l GNU/Linux man:0x000003 oem:0x5344 name:SD08G hwrev:0x8 fwrev:0x0
Transcend microSDHC 8GB Kit, Class 4 (TS8GUSDHC4) 4.7 3.7 Raspbian Wheezy Linux raspberry-pi 3.1.9+ #1 PREEMPT Wed Jun 6 16:26:14 CEST 2012 armv6l GNU/Linux man:0x000003 oem:0x5344 name:SU08G hwrev:0x8 fwrev:0x0
Transcend SDHC 8GB Class 10 (TS8GSDHC10) 4.6 4.6 Debian Squeeze "debian6-19-04-2012" Linux raspberrypi 3.1.9+ armv61 GNU/Linux
Transcend SDHC 8GB Class 10 (TS8GSDHC10) 19.5 18.5 Debian Wheezy "Rasbpian" Linux raspberrypi 3.1.9+ #168 PREEMPT Tue Aug 7 22:51:44 BST 2012 armv6l GNU/Linux
Transcend SDHC 8GB Class 10 (TS8GSDU1) UHC-I X300 20.9 13.1 Linux alarmpi 3.6.11-14-ARCH+ #1 PREEMPT Sun Jul 21 17:39:58 CDT 2013 armv6l GNU/Linux Arch Linux
Transcend SDHC 8GB Class 10 (TS8GSDHC10U1) UHC-I X600 21.1 15 Linux alarmpi 3.6.11-14-ARCH+ #1 PREEMPT Sun Jul 21 17:39:58 CDT 2013 armv6l GNU/Linux Arch Linux
Transcend SDHC 8GB Class 10 (TS8GSDHC10U1) UHC-I X600 18.5 12.4 Debian Wheezy (Raspbian 2014-01-07) Linux raspi 3.10.25+ #622 PREEMPT Fri Jan 3 18:41:00 GMT 2014 armv6l GNU/Linux man:0x000074 oem:0x4a45 name:SDU1 hwrev:0x0 fwrev:0x2
Transcend SDHC 4GB Class 6 9.8 8.8 Fedora Remix FC14 Linux raspi 3.1.9 #1 PREEMPT Sat Mar 3 21:58:00 UTC 2012 armv6l armv6l armv6l GNU/Linux Not sure why this setup is faster than others, test results repeatable.
Transcend SDHC 4GB Class 10 (TS4GSDHC10) 17.6 12.1 Debian Wheezy "Rasbpian" (2012-10-28) Linux raspberrypi 3.2.27+ #250 PREEMPT Thu Oct 18 19:03:02 BST 2012 armv6l GNU/Linux
Transcend SDHC 16GB Class 10 20.3 11.9 Debian Wheezy "Rasbpian" Linux raspberry-pi 3.1.9-cutdown+ #173
Transcend SDHC 16GB Class 10 17.4 12.0 Debian Wheezy (2012-08-08-wheezy-armel) Linux raspberrypi 3.2.27+ #160 PREEMPT Mon Sep 17 23:18:42 BST 2012 armv6l GNU/Linux man:0x000074 oem:0x4a45 name:SDC hwrev:0x1 fwrev:0x0
Transcend SDHC 16GB Class 10 UHS-I Premium 300x 21.4 9.6 Debian Rasbpian Wheezy (2013-09-25) Linux raspberrypi 3.6.11+ #538 PREEMPT Fri Aug 30 20:42:08 BST 2013 armv6l
Transcend SDHC 32GB Class 10 (TS32GSDHC10E) 20.3 15.3 Debian Wheezy "Rasbpian" Linux raspberrypi 3.1.9+ #242 PREEMPT Wed Aug 1 19:47:22 BST 2012 armv6l GNU/Linux man:0x000074 oem:0x4a45 name:SDC hwrev:0x1 fwrev:0x0
Sandisk Extreme Pro SDHC 8GB Class 10 UHS-I 21.6 21.7 Arch Linux Linux alarmpi 3.6.11-11-ARCH+ #1 PREEMPT Tue May 14 16:12:58 UTC 2013 armv6l GNU/Linux man:0x000003 oem:0x5344 name:SU08G hwrev:0x8 fwrev:0x0
Sandisk Extreme Pro SDHC 16GB Class 10 UHS-I (SDSDXPA-016G-A75) 21.6 21.7 Debian Wheezy "Rasbpian" Linux raspberrypi 3.2.27+ #160 PREEMPT Mon Sep 17 23:18:42 BST 2012 armv6l GNU/Linux
SanDisk Extreme Pro SDHC 16GB Class 10 20.8 18.6 Debian Wheezy "Raspbian" Linux raspberrypi 3.1.9+ #125 PREEMPT Sun Jun 17 16:09:36 BST 2012 armv6l GNU/Linux
Sandisk Ultra SDHC I Class 6 ("30MB/s") 4.7 4.8 Debian Wheezy "Raspbian" 3.2.18+ #3 PREEMPT Feels faster than my Kingston 4GB Class 4 card.
Sony 8GB SDHC Class 4 17.4 11.8 Debian Wheezy Raspbian Linux 3.1.9+ #272 PREEMPT Tue Aug 7 22:51:44 BST 2012
WINTEC FileMate Professional SDHC 16GB Class 10 (3FMSD16GBC10-R) 4.6 4.5 Debian Squeeze "debian6-19-04-2012" Linux raspberrypi 3.1.9+ #95 PREEMPT Thu May 31 13:21:40 BST 2012 armv6l GNU/Linux After installing new kernel with rpi-update on 2012-06-01
Lexar SDHC 8GB Class 4 "Multi-use" 18.9 6.8 Debian Wheezy "Raspbian" 3.1.9+ #110 PREEMPT
Lexar SDHC 8GB Class 6 "PLATINUM II" 19.7 10.1 Debian Wheezy "Raspbian" 3.1.9+ #168 PREEMPT
Lexar SDHC 16GB Class 10 "PLATINUM II" 5.3 4.8 Debian Wheezy/sid Linux raspberrypi 3.2.19-rpi1+ #3
Lexar SDHC 16GB Class 10 "PLATINUM II" 18.9 9.0 Debian Wheezy "Raspbian" Linux raspbian 3.1.9+ #168 PREEMPT Same card as 'Lexar SDHC 16GB Class 10 "PLATINUM II"' above - imaged with Raspbian
Lexar SDXC 64GB UHS-I Class 10 Premium series 20.7 15.8 Debian Wheezy "Raspbian" Linux raspberrypi 3.6.11+ #371 PREEMPT Thu Feb 7 16:31:35 GMT 2013 armv6l GNU/Linux
Lexar SDHC 8GB UHS-I Class 10 Premium series 19.4 8.8 raspbmc-rls-1.0-hardfp-b20131223-u20131223 Linux raspbmc 3.10.24 #2 PREEMPT Mon Dec 23 05:18:12 UTC 2013 armv6l GNU/Linux man:0x000028 oem:0x4245 name: hwrev:0x0 fwrev:0x2
Mushkin SDHC 16GB Class 10 MKNSDHCC10-16GB 19.7 10.9 2012-07-15-wheezy-raspbian 3.1.9+ #168 PREEMPT
PNY SDHC 8GB Class 6 Limited Edition 7.4 13.2 Debian Wheezy "Rasbpian" Linux raspberrypi 3.1.9+ #168 PREEMPT Sat Jul 14 18:56:31 BST 2012 armv6l GNU/Linux
PNY SDHC 32GB Class 10 Elite Performance 20.4 15.4 Debian Wheezy "Rasbpian" Linux raspberrypi 3.6.11+ #456 PREEMPT armv6l sys v.3.3.3 avoid_pwm_pll=1 arm_freq=1000 gpu_freq=675 sdram_freq=500 core_freq=275 over_voltage=6
SanDisk MicroSDHC 4GB 5.1 11.4 Debian Wheezy "Rasbpian" Linux raspberrypi 3.1.9+ #168 PREEMPT Sat Jul 14 18:56:31 BST 2012 armv6l GNU/Linux
SanDisk UHS-I C10 Ultra SDHC 8GB (SDSDU-008G-U46) 19.1 20.8 Debian Wheezy "Rasbpian" Linux raspberrypi 3.1.9+ #272 PREEMPT Tue Aug 7 22:51:44 BST 2012 armv6l GNU/Linux
SanDisk Ultra SDHC 8GB class 10 (30 MB/s) 21.7 15.7 Debian Wheezy "Raspbian" Linux raspberrypi 3.6.11+ #434 PREEMPT Wed May 1 21:13:52 BST 2013 armv6l GNU/Linux man:0x000003 oem:0x5344 name:SU08G hwrev:0x8 fwrev:0x0 (some read time trials with drop caches: 21.0/21.7/21.8/21.8/21.8/21.8/(write#2:)21.7; two write trials: 15.7/15.8; timings (dd;sync): 33.761;5.799)
Panasonic SDHC 4GB Class 10 UHS-I 11.2 6.2 Debian Wheezy "Raspbian" 3.1.9+ #144 PREEMPT Panasonic RP-SDU04GE1K
Sony SDHC 8GB Class 10 UHS-1 20.8 17.2 Debian Wheezy "Raspbian" 3.2.27+ #250 PREEMPT
Sony SDHC 4Gb Class 10 UHS-I "40MB/s" (SF-4UY) 18.8 10.3 openELEC 3.0.6 Linux openelecPi 3.6.11 #1 PREEMPT Thu Jun 13 21:32:37 CEST 2013 armv6l GNU/Linux man:0x000027 oem:0x5048 name:SD04G hwrev:0x3 fwrev:0x0
Sony SDHC 8Gb Class 10 UHS-I "90MB/s" (SF-8UX) 21.1 16.9 Raspbian 2013-05-25-wheezy Linux raspberrypi 3.6.11+ #456 PREEMPT Mon May 20 17:42:15 BST 2013 armv6l GNU/Linux man:0x000082 oem:0x4a54 name:NCard hwrev:0x0 fwrev:0x0
Sony SDHC 16Gb Class 10 UHS-I "40MB/s" 21.8 13.5 Raspbian 2013-07-26-wheezy Linux raspberrypi 3.6.11+ #474 PREEMPT Thu Jun 13 17:14:42 BST 2013 armv6l GNU/Linux

SD(DC|DX] Card Class 6 & 10 Hints with OverClockings

[http://elinux.org/index.php?title=RPiconfig&section=14%7CSD card usage Hints with OverClocking 


RaspPi.png Back to the Hub

References