RPi VNC Screen Sharing
Back to RPi Guides.
Raspberry Pi VNC Screen Sharing / Remote control
What does it do?
Sometimes it is convenient to share screens (remote control) to be able to do support from your own computer. This works just like the VNC Server, with the difference you don't log in to another user than the one the console is using.
What do you need?
- A Raspberry Pi, model B.
- A boot SD card for the Raspberry Pi.
- A network connection (Ethernet or WiFi).
- Special software on both the Raspberry Pi and the remote, controlling computer
What skill level is required?
This project does not require any coding or compilation. Very basic Linux and networking knowledge would be useful, but not essential.
You need to...
- Install software
- Enter basic Linux commands
- Use standard software tools (Windows/Linux/Mac) to add software to your PC
- Connect computers using ethernet cables
How does it work?
The commands described below start a "virtual" graphical session. It allows a user to control mouse, keyboard and screen on a remote Raspberry Pi to for example do support.
Overview of this project
You need to
- Install Vino VNC (Virtual Network Computing) server software on the Raspberry Pi
- Start and configure the VNC server software
- Install a VNC client on another computer
- Connect over a network from your computer to the Raspberry Pi
Log in to your Pi and install the Vino Package
$ sudo apt-get install vino
Next Run X11 (if in CLI mode)
Once that is done you can run the vino-preferences from the terminal.
Configure it like you want it to work, if you want to be able to controll the remote Raspberry Pi computer without remote confirmation you have to check booth "Allow" boxes on top, uncheck the third "confirm" box and as a good recommendation check the 4 box about "Require user password" and enter a password you'll remember. The rest isn't that important so just click "Close" after that.
When closing vino-prefereces you may get an error message something like:
Gtk-CRITICAL **: gtk_entry_set_text: assertion `text != NULL' failed
One possible work around for this bug is to re-install vino.
sudo apt-get remove vino sudo apt-get install vino
If the installed version of vino lacks the module vino-preferences, use gsettings from terminal:
- to avoid problems with encryption and some vnc viewers:
gsettings set org.gnome.Vino require-encryption false
- if you are having problems connecting, try disabling user confirmation
gsettings set org.gnome.Vino prompt-enabled false
- to disable login password
gsettings set org.gnome.Vino authentication-methods "['none']"
- to enable login password
gsettings set org.gnome.Vino authentication-methods "['vnc']" gsettings set org.gnome.Vino vnc-password "$(echo -n "insertnewpass" | base64)"
If you're working over SSH, use dbus-launcher to invoke gsettings
You can also chage this values with dconf-editor
apt-get install dconf-editor
and search in the tree org.gnome.desktop.remote-access, but keep in mind the password must be encoded in base64, you can do it with:
echo -n "insertnewpass" | base64
Starting vino at system boot
Now Raspbian doesn't autostart vino, so we have to fix that, there're two methods:
Make a script in the /etc/sudoers.d folder.
$ sudo leafpad /etc/sudoers.d/vsrv.sh &
and put the following in that file.
#! /bin/bash /usr/lib/vino/vino-server
Set the file to Execute
$ sudo chmod +x vsrv.sh
Then this file has to autorun when we start X11, on Raspbian this can be done by editing the /etc/xdg/lxsession/LXDE/autostart file:
$ sudo leafpad /etc/xdg/lxsession/LXDE/autostart &
Just add one line at the end of the file
lightdm autostart (tested on Raspbian Jessie)
Make a config file in /etc/xdg/autostart/
sudo nano /etc/xdg/autostart/vino-server.desktop
and fill in with this text:
[Desktop Entry] Name=Desktop Sharing Comment=GNOME Desktop Sharing Server Exec=/usr/lib/vino/vino-server Terminal=false Type=Application X-GNOME-Autostart-Phase=Applications X-GNOME-AutoRestart=true NoDisplay=true
To apply changes, reboot the Raspberry Pi
Install UltraVNC (if you run windows) or Tight VNC on your desktop from the link below.
Or install it using your package manager. The following works on my ubuntu 11.10 workstation
$ sudo apt-get install xtightvncviewer
$ sudo apt-get install remmina
Remmina is a remote client that can handle multiple protocolls, really handy.
Then use <Your Pi IP>:1 (e.g. 192.168.1.2:1) as the host name when connecting.
- ↑ You can put your raspberry pi in /etc/hosts on Linux systems. I think you can make such a file on windows too. Then you can refer to your raspberry pi as "rpi" or whatever you called it.