Difference between revisions of "RPiconfig"
(enable_overvolting does not exist) |
|||
Line 45: | Line 45: | ||
!align="right"|sdram_freq | !align="right"|sdram_freq | ||
| frequency of SDRAM in MHz. Default 400. | | frequency of SDRAM in MHz. Default 400. | ||
− | |||
− | |||
− | |||
|- | |- | ||
!align="right"|over_voltage | !align="right"|over_voltage |
Revision as of 08:47, 22 February 2012
The Raspberry Pi config.txt file is read by the GPU before the ARM core is initialised. It can be used to set various system configuration parameters.
This file is an optional file on the boot partition. It would normally be accessible as /boot/config.txt from Linux.
The information below originally came from Dom in this forum post.
WARNING: Setting any of the parameters which over volt your Raspberry Pi will set a permanant bit within the SOC and your warranty is void. So If you care about the warranty do not adjust voltage.
File format
The format is "property=value". value is an integer. One option per line. # is comment character. E.g.
arm_freq=800 #hdmi_mode=19 sdtv_mode=2 overscan_left=32 overscan_right=32 overscan_top=32 overscan_bottom=32
Overclocking options
Option | Description |
---|---|
arm_freq | frequency of ARM in MHz. Default 700. |
gpu_freq | Sets core_freq, h264_freq, isp_freq, v3d_freq together. |
core_freq | frequency of GPU processor core in MHz. Default 250. |
h264_freq | frequency of hardware video block in MHz. Default 250. |
isp_freq | frequency of image sensor pipeline block in MHz. Default 250. |
v3d_freq | frequency of 3D block in MHz. Default 250. |
sdram_freq | frequency of SDRAM in MHz. Default 400. |
over_voltage | ARM/GPU core voltage adjust. [-16,8] equates to [0.8V,1.4V]. Default 0 (1.2V) |
over_voltage_sdram | Sets over_voltage_sdram_c, over_voltage_sdram_i, over_voltage_sdram_p together |
over_voltage_sdram_c | SDRAM controller voltage adjust. [-16,8] equates to [0.8V,1.4V]. Default 0 (1.2V) |
over_voltage_sdram_i | SDRAM I/O voltage adjust. [-16,8] equates to [0.8V,1.4V]. Default 0 (1.2V) |
over_voltage_sdram_p | SDRAM phy voltage adjust. [-16,8] equates to [0.8V,1.4V]. Default 0 (1.2V) |
Video mode options
Option | Description |
---|---|
sdtv_mode | composite tv mode. Default is 0 (NTSC) |
sdtv_aspect | composite aspect ratio. Default is 1 (4:3) |
hdmi_mode | hdmi mode. Default is negotiated with display. |
overscan_left | number of pixels to skip on left |
overscan_right | number of pixels to skip on right |
overscan_top | number of pixels to skip on top |
overscan_bottom | number of pixels to skip on bottom |
framebuffer_width | console framebuffer width in pixels. Default matches display. |
framebuffer_height | console framebuffer height in pixels. Default matches display. |
test_mode | enable test sound/image during boot for manufacturing test. |
enable_l2cache | enable arm access to GPU's L2 cache. Needs corresponding L2 enabled kernel. Default 0. |
Mode values
sdtv_mode is
SDTV_MODE_NTSC = 0, /**<Normal NTSC */ SDTV_MODE_NTSC_J = 1, /**<Japanese version of NTSC – no pedestal.*/ SDTV_MODE_PAL = 2, /**<Normal PAL */ SDTV_MODE_PAL_M = 3, /**<Brazilian version of PAL – 525/60 rather than 625/50, different subcarrier */
sdtv_aspect is
SDTV_ASPECT_4_3 = 1, /**<4:3 */ SDTV_ASPECT_14_9 = 2, /**<14:9 */ SDTV_ASPECT_16_9 = 3 /**<16:9 */
hdmi_mode is
HDMI_CEA_VGA = 1, HDMI_CEA_480p60 = 2, HDMI_CEA_480p60H = 3, HDMI_CEA_720p60 = 4, HDMI_CEA_1080i60 = 5, HDMI_CEA_480i60 = 6, HDMI_CEA_480i60H = 7, HDMI_CEA_240p60 = 8, HDMI_CEA_240p60H = 9, HDMI_CEA_480i60_4x = 10, HDMI_CEA_480i60_4xH = 11, HDMI_CEA_240p60_4x = 12, HDMI_CEA_240p60_4xH = 13, HDMI_CEA_480p60_2x = 14, HDMI_CEA_480p60_2xH = 15, HDMI_CEA_1080p60 = 16, HDMI_CEA_576p50 = 17, HDMI_CEA_576p50H = 18, HDMI_CEA_720p50 = 19, HDMI_CEA_1080i50 = 20, HDMI_CEA_576i50 = 21, HDMI_CEA_576i50H = 22, HDMI_CEA_288p50 = 23, HDMI_CEA_288p50H = 24, HDMI_CEA_576i50_4x = 25, HDMI_CEA_576i50_4xH = 26, HDMI_CEA_288p50_4x = 27, HDMI_CEA_288p50_4xH = 28, HDMI_CEA_576p50_2x = 29, HDMI_CEA_576p50_2xH = 30, HDMI_CEA_1080p50 = 31, HDMI_CEA_1080p24 = 32, HDMI_CEA_1080p25 = 33, HDMI_CEA_1080p30 = 34, HDMI_CEA_480p60_4x = 35, HDMI_CEA_480p60_4xH = 36, HDMI_CEA_576p50_4x = 37, HDMI_CEA_576p50_4xH = 38, HDMI_CEA_1080i50_rb = 39, HDMI_CEA_1080i100 = 40, HDMI_CEA_720p100 = 41, HDMI_CEA_576p100 = 42, HDMI_CEA_576p100H = 43, HDMI_CEA_576i100 = 44, HDMI_CEA_576i100H = 45, HDMI_CEA_1080i120 = 46, HDMI_CEA_720p120 = 47, HDMI_CEA_480p120 = 48, HDMI_CEA_480p120H = 49, HDMI_CEA_480i120 = 50, HDMI_CEA_480i120H = 51, HDMI_CEA_576p200 = 52, HDMI_CEA_576p200H = 53, HDMI_CEA_576i200 = 54, HDMI_CEA_576i200H = 55, HDMI_CEA_480p240 = 56, HDMI_CEA_480p240H = 57, HDMI_CEA_480i240 = 58, HDMI_CEA_480i240H = 59,