View source for RZ-A/Boards/RZA2MEVB

= Renesas RZ/A2M Evaluation Board =
* '''Product Page:''' https://www.renesas.com/us/en/products/software-tools/boards-and-kits/eval-demo/rz-a2m-evaluation-board-kit.html#productInfo
[[File:Rza2mevb.jpg|200px|thumb|right]]
<br>
<br>
<br>
=== Quick Instructions ===
* Clone the BSP from github and build an XIP kernel
 $ git clone https://github.com/renesas-rz/rza_linux-4.19_bsp.git
 $ cd rza_linux-4.19_bsp
 $ ./build.sh config rza2mevb
 $ ./build.sh buildroot
 $ ./build.sh u-boot
 $ ./build.sh kernel xipImage

* Use J-Link to program the board
 $ ./build.sh jlink u-boot
 $ ./build.sh jlink dtb
 $ ./build.sh jlink xipImage 0x20200000
 $ ./build.sh jlink rootfs_axfs 0x20800000

* Boot Linux using the follow command in u-boot
 => run xha_boot

<br>
<br>

'''NOTE:''' Make sure the SW6 switches on the base board match what is displayed when u-boots.
                 ON     SW6
                 +---------------------+
                 |       = = = =       |
                 | = = =               |
                 | 1 2 3 4 5 6 7 8 9 0 |  Please make sure your sub-board matches
                 +---------------------+  these switch settings.
        SW6-1 set to Other
        SW6-2 set to Audio
        SW6-3 set to USB, CAN, UART(console)
        SW6-4 set to Ether1
        SW6-5 set to Ether2
        SW6-6 set to VDC6
        SW6-7 set to VDC6