Difference between revisions of "RZ-G/Boards/Yocto 2.0"

From eLinux.org
Jump to: navigation, search
m (Preliminary steps)
Line 28: Line 28:
 
<br/>Download the related kernel drivers as well:
 
<br/>Download the related kernel drivers as well:
 
<br/>https://www.renesas.com/en-us/software/D6000544.html
 
<br/>https://www.renesas.com/en-us/software/D6000544.html
 +
<br/>You should have something like this:
 +
<pre>
 +
$ ls -1
 +
RZG_Series_Evaluation_Software_Package_for_Linux-yyyymmdd.tar.gz.zip
 +
RZG_Series_Evaluation_Software_Package_of_Linux_Drivers-yyyymmdd.tar.gz.zip
 +
</pre>
 
</li>
 
</li>
  
Line 46: Line 52:
  
 
== Building the BSP for the Renesas RZ/G1 Starter Kit Boards ==
 
== Building the BSP for the Renesas RZ/G1 Starter Kit Boards ==
 +
=== Setting up a new build directory ===
 +
These steps need to be executed only once for a new build directory. For subsequent builds in the same directory skip this section and go straight to [[RZ-G/Boards/Yocto_2.0#Running a build|Running a build.]]
 
<ol>
 
<ol>
<li>Create a directory and switch to it:<br/>
+
<li>Create a build directory and switch to it:<br/>
Warning! Yocto builds require a lot of disk space (up to 100 GB). Make sure you have got enough before starting the build.
 
 
<pre>
 
<pre>
 
export WORK=<path-to-your-build-directory>
 
export WORK=<path-to-your-build-directory>
Line 56: Line 63:
 
</li>
 
</li>
  
<li>Clone the basic Yocto layers:
+
<li>Copy the downloaded multimedia and graphics zip files and the setup scripts to the build directory. You should have something like this:
 
<pre>
 
<pre>
cd $WORK
+
$ ls -1
git clone git://git.yoctoproject.org/poky
+
rzg_bsp_setup_yocto2.0.sh
git clone git://git.openembedded.org/meta-openembedded
+
rzg_demos_setup_yocto2.0.sh
git clone git://git.linaro.org/openembedded/meta-linaro.git
+
RZG_Series_Evaluation_Software_Package_for_Linux-yyyymmdd.tar.gz.zip
 +
RZG_Series_Evaluation_Software_Package_of_Linux_Drivers-yyyymmdd.tar.gz.zip
 
</pre>
 
</pre>
 
</li>
 
</li>
  
 
<li>
 
<li>
Switch to proper branches/commits:
+
Execute the script rzg_bsp_setup_yocto2.0.sh:
 +
<br/>This will clone all necessary repositories, switch to the proper branches/commits, copy files as necessary, etc.
 
<pre>
 
<pre>
cd $WORK/poky
+
./rzg_bsp_setup_yocto2.0.sh
git checkout -b tmp 3b223f75eec1738fbc913858e8e11c8305e3edcb
 
 
 
cd $WORK/meta-openembedded
 
git checkout -b tmp dc5634968b270dde250690609f0015f881db81f2
 
 
 
cd $WORK/meta-linaro
 
git checkout -b tmp 12993e6bc8658ee37d303d8d59007f8dd9ab2b30
 
 
</pre>
 
</pre>
Other versions are not tested for compatibility.
 
 
</li>
 
</li>
 +
</ol>
  
<li>
+
=== Running a build ===
Clone the Renesas BSP layer:
+
Warning! Yocto builds require a lot of disk space (up to 100 GB). Make sure you have got enough before starting the build.
<pre>
+
<ol>
cd $WORK
+
<li>Go to your build directory:<br/>
git clone https://github.com/renesas-rz/meta-renesas
 
</pre>
 
</li>
 
 
 
<li>
 
Switch to the yocto_2.0 branch:
 
<pre>
 
cd $WORK/meta-renesas
 
git checkout yocto_2.0
 
</pre>
 
</li>
 
 
 
<li>
 
Download the proprietary libraries from <br/>https://www.renesas.com/en-us/software/D6000548.html<br/> and related kernel drivers from https://www.renesas.com/en-us/software/D6000544.html
 
</li>
 
 
 
<li>
 
Create an install folder for the proprietary libraries:
 
 
<pre>
 
<pre>
 +
export WORK=<path-to-your-build-directory>
 
cd $WORK
 
cd $WORK
mkdir proprietary
 
</pre>
 
Copy the downloaded proprietary libraries into this new folder, e.g.:
 
<pre>
 
cp ~/Downloads/RZG_Series_Evaluation_Software_Package* $WORK/proprietary
 
</pre>
 
</li>
 
 
<li>
 
Unzip the proprietary libraries, e.g.:
 
<pre>
 
cd $WORK/proprietary
 
unzip RZG_Series_Evaluation_Software_Package_for_Linux-20161011.tar.gz.zip
 
unzip RZG_Series_Evaluation_Software_Package_of_Linux_Drivers-20161011.tar.gz.zip
 
</pre>
 
You should see the following files:
 
<pre>
 
$ ls -l $WORK/proprietary
 
total 4.3M
 
-rw-rw-r-- 1 builduser builduser 3.1M Dec 06 10:25 RZG_Series_Evaluation_Software_Package_for_Linux-20101011.tar.gz
 
-rw-rw-r-- 1 builduser builduser 1.2M Dec 06 10:25 RZG_Series_Evaluation_Software_Package_of_Linux_Drivers-20161011.tar.gz
 
 
</pre>
 
</pre>
 
</li>
 
</li>
  
 
<li>
 
<li>
Populate the meta-renesas layer with graphics and multimedia drivers:
+
Initialize the build environment:
 +
<br/>Note that this command is executed from the $WORK folder and it changes the current folder to $WORK\build
 
<pre>
 
<pre>
cd $WORK/meta-renesas/meta-rzg1
 
./copy_gfx_software_<board>.sh ../../proprietary
 
./copy_mm_software_lcb.sh ../../proprietary
 
</pre>
 
</li>
 
 
<li>
 
Setup build environment:
 
<pre>
 
cd $WORK
 
 
source poky/oe-init-build-env
 
source poky/oe-init-build-env
 
</pre>
 
</pre>
Line 146: Line 101:
  
 
<li>
 
<li>
Prepare default configuration files:
+
Copy the proper default configuration files (bblayers.conf and local.conf) depending on the target board:
 +
<br/>Note: At this point the current folder should be $WORK/build
 
<pre>
 
<pre>
cd $WORK/build
 
 
cp ../meta-renesas/meta-rzg1/templates/<board>/bblayers.conf ./conf
 
cp ../meta-renesas/meta-rzg1/templates/<board>/bblayers.conf ./conf
</pre>
 
<pre>
 
 
cp ../meta-renesas/meta-rzg1/templates/<board>/local.conf ./conf/local.conf
 
cp ../meta-renesas/meta-rzg1/templates/<board>/local.conf ./conf/local.conf
 
</pre>
 
</pre>
Edit local.conf to enable/disable graphics and multimedia proprietary drivers support.  
+
You can edit the file local.conf, e.g. to enable/disable graphics and multimedia proprietary drivers support.  
 
</li>
 
</li>
  

Revision as of 17:17, 28 June 2017

This page contains information on building a Yocto 2.0 based Linux BSP for the Renesas RZ/G1E and Renesas RZ/G1M Starter Kit boards.

Click here for instructions on building a Yocto 1.6.1 BSP.

Supported Linux Host distributions

Yocto 2.0 (Jethro) is compatible with various Linux Host distributions - Ubuntu 14 and 15, Debian 7 and 8, Fedora 21 and 21 and others. For a complete list of the supported distributions see the Supported Linux Distributions section of the Yocto 2.0 Reference Manual. Please use one of the distributions on that list, e.g. Ubuntu 14.04 LTS.

Preliminary steps

  1. Install the required host packages:
    Ubuntu and Debian
    sudo apt-get install gawk wget git-core diffstat unzip texinfo gcc-multilib \
         build-essential chrpath socat
    

    Fedora

    sudo dnf install gawk make wget tar bzip2 gzip python unzip perl patch \
         diffutils diffstat git cpp gcc gcc-c++ glibc-devel texinfo chrpath \
         ccache perl-Data-Dumper perl-Text-ParseWords perl-Thread-Queue socat \
         findutils which
    

    Refer to Yocto Project Quick Start for more information.

  2. Download the proprietary Multimedia and Graphics evaluation libraries for RZ/G from Renesas:
    https://www.renesas.com/en-us/software/D6000548.html
    Download the related kernel drivers as well:
    https://www.renesas.com/en-us/software/D6000544.html
    You should have something like this:
    $ ls -1
    RZG_Series_Evaluation_Software_Package_for_Linux-yyyymmdd.tar.gz.zip
    RZG_Series_Evaluation_Software_Package_of_Linux_Drivers-yyyymmdd.tar.gz.zip
    
  3. Download the helper scripts that will set up the build environment:
    File:Rzg scripts yocto2.0.tar.gz
  4. Unpack the script files:
    $ tar -xvf Rzg_scripts_yocto2.0.tar.gz
    rzg_bsp_setup_yocto2.0.sh
    rzg_demos_setup_yocto2.0.sh
    

Building the BSP for the Renesas RZ/G1 Starter Kit Boards

Setting up a new build directory

These steps need to be executed only once for a new build directory. For subsequent builds in the same directory skip this section and go straight to Running a build.

  1. Create a build directory and switch to it:
    export WORK=<path-to-your-build-directory>
    mkdir $WORK
    cd $WORK
    
  2. Copy the downloaded multimedia and graphics zip files and the setup scripts to the build directory. You should have something like this:
    $ ls -1
    rzg_bsp_setup_yocto2.0.sh
    rzg_demos_setup_yocto2.0.sh
    RZG_Series_Evaluation_Software_Package_for_Linux-yyyymmdd.tar.gz.zip
    RZG_Series_Evaluation_Software_Package_of_Linux_Drivers-yyyymmdd.tar.gz.zip
    
  3. Execute the script rzg_bsp_setup_yocto2.0.sh:
    This will clone all necessary repositories, switch to the proper branches/commits, copy files as necessary, etc.
    ./rzg_bsp_setup_yocto2.0.sh
    

Running a build

Warning! Yocto builds require a lot of disk space (up to 100 GB). Make sure you have got enough before starting the build.

  1. Go to your build directory:
    export WORK=<path-to-your-build-directory>
    cd $WORK
    
  2. Initialize the build environment:
    Note that this command is executed from the $WORK folder and it changes the current folder to $WORK\build
    source poky/oe-init-build-env
    
  3. Copy the proper default configuration files (bblayers.conf and local.conf) depending on the target board:
    Note: At this point the current folder should be $WORK/build
    cp ../meta-renesas/meta-rzg1/templates/<board>/bblayers.conf ./conf
    cp ../meta-renesas/meta-rzg1/templates/<board>/local.conf ./conf/local.conf
    

    You can edit the file local.conf, e.g. to enable/disable graphics and multimedia proprietary drivers support.

  4. Start the build
    bitbake core-image-weston
    

    Building the image can take up to a few hours depending on your host system performance.
    After the build has been completed successfully, you should see the output similar to:

    NOTE: Tasks Summary: Attempted 4704 tasks of which 31 didn't need to be rerun and all succeeded.
    

    and the command prompt should return.

  5. Bitbake has generated all the necessary files in ./tmp/deploy/images directory.
    uImage is the kernel image, uImage-r8a7745-skrzg1e.dtb is the device tree file, uImage+dtb is the combined kernel and device tree image, core-image-weston-skrzg1e.tar.bz2 is the rootfs, modules-skrzg1e.tgz are the kernel modules.
  6. You can now boot the RZ/G1E or RZ/G1M Starter Kit boards over TFTP and NFS. You can also boot from microSD but note that the microSD slot is recognized as mmcblk1.