Difference between revisions of "Raspbian"
(→Modified packages) |
(add ceph) |
||
(35 intermediate revisions by 2 users not shown) | |||
Line 7: | Line 7: | ||
A chroot can be bootstrapped from a Debian squeeze armel installation using the following commands (replace /chroots/wheezy-armhf-rpi with where you want your chroot). | A chroot can be bootstrapped from a Debian squeeze armel installation using the following commands (replace /chroots/wheezy-armhf-rpi with where you want your chroot). | ||
− | + | <pre> | |
− | + | debootstrap --arch=armhf wheezy /chroots/wheezy-armhf-rpi http://archive.raspbian.org/raspbian | |
− | + | cd /chroots/wheezy-armhf-rpi | |
− | + | wget http://archive.raspbian.org/raspbian.public.key | |
− | + | chroot /chroots/wheezy-armhf-rpi | |
− | + | mount -t proc proc /proc | |
− | + | apt-key add raspbian.public.key | |
+ | apt-get update | ||
+ | </pre> | ||
If you just want to install the minimum number of packages add a --variant=minbase to the bootstrap command | If you just want to install the minimum number of packages add a --variant=minbase to the bootstrap command | ||
Line 19: | Line 21: | ||
Since this is running in a chroot you probably don't want it attempting to start and stop services when you update packages. To avoid this create a file /usr/sbin/policy-rc.d | Since this is running in a chroot you probably don't want it attempting to start and stop services when you update packages. To avoid this create a file /usr/sbin/policy-rc.d | ||
with the following commands | with the following commands | ||
− | + | <pre> | |
− | + | cat << EOD >/usr/sbin/policy-rc.d | |
− | + | #!/bin/sh | |
− | + | echo "rc.d operations disabled for chroot" | |
− | + | exit 101 | |
− | + | EOD | |
+ | chmod 0755 /usr/sbin/policy-rc.d | ||
+ | </pre> | ||
==Modified packages== | ==Modified packages== | ||
Line 40: | Line 44: | ||
| testsuite failed on plugwash's build system and package was needed | | testsuite failed on plugwash's build system and package was needed | ||
| local hack, hopefully we can drop later. | | local hack, hopefully we can drop later. | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
| | | | ||
|- | |- | ||
Line 68: | Line 66: | ||
| gcc testsuite takes ages and we don't have the resources to do anything about failures anyway, especially for a non-default compiler version | | gcc testsuite takes ages and we don't have the resources to do anything about failures anyway, especially for a non-default compiler version | ||
| local hack, may be dropped later (but probablly won't) | | local hack, may be dropped later (but probablly won't) | ||
+ | | | ||
+ | |- | ||
+ | | subversion | ||
+ | | newer version from sid | ||
+ | | plugwash thought package was about to migrate to wheezy but it didn't actually migrate | ||
+ | | not much we can do about this :( | ||
| | | | ||
|- | |- | ||
| git | | git | ||
| testsuite disabled | | testsuite disabled | ||
− | | testsuite failed | + | | testsuite failed and package was needed |
− | | | + | | seems to be a subversion related issue (debian bug [http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=678137 678137]), fixed in debian sid but we will have to carry our own patch for wheezy. |
| | | | ||
|- | |- | ||
Line 91: | Line 95: | ||
| gcc testsuite takes ages and we don't have the resources to do anything about failures anyway, especially for a non-default compiler version | | gcc testsuite takes ages and we don't have the resources to do anything about failures anyway, especially for a non-default compiler version | ||
| local hack, may be dropped later (but probablly won't) | | local hack, may be dropped later (but probablly won't) | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
| | | | ||
|- | |- | ||
Line 105: | Line 103: | ||
| | | | ||
|- | |- | ||
− | | | + | | Update jamvm |
− | | libjvm-so in icedtex6-jre-jamvm was coming out with armv7 code in it | + | | libjvm-so in icedtex6-jre-jamvm with old jamvm was coming out with armv7 code in it |
− | | | + | | Likely to be kept as a local change in raspbian for wheezy. Openjdk-6 is likely to be dropped completely for jessie. |
| | | | ||
|- | |- | ||
Line 126: | Line 124: | ||
| neon variant sets of our v7 contamination checker which could possiblly obscure real problems. | | neon variant sets of our v7 contamination checker which could possiblly obscure real problems. | ||
| Not suitable for pushing upstream. May be dropped if our contamination checker gets smarter. | | Not suitable for pushing upstream. May be dropped if our contamination checker gets smarter. | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
| | | | ||
|- | |- | ||
Line 144: | Line 130: | ||
| testsuite failed on plugwash's build system and package was needed | | testsuite failed on plugwash's build system and package was needed | ||
| testsuite fails for debian as well, hopefully they will fix it at some point. | | testsuite fails for debian as well, hopefully they will fix it at some point. | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
| | | | ||
|- | |- | ||
Line 167: | Line 135: | ||
| seperate build-arch and build-indep | | seperate build-arch and build-indep | ||
| documentation build was silently failing (causing a file not found error later) on raspbian | | documentation build was silently failing (causing a file not found error later) on raspbian | ||
− | | Bug [http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=675414 675414]submitted to debian for build-arch/build-indep split. No idea on root cause of documentation build issue. | + | | Bug [http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=675414 675414]submitted to debian for build-arch/build-indep split and has been fixed in experimental. No idea on root cause of documentation build issue. |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
| | | | ||
|- | |- | ||
− | | perl | + | | rowspan=2 | perl |
| change build-depends and debian/config.debian to build with gcc-4.7 | | change build-depends and debian/config.debian to build with gcc-4.7 | ||
| gcc 4.6 failed to build package with ICE | | gcc 4.6 failed to build package with ICE | ||
Line 182: | Line 144: | ||
| | | | ||
|- | |- | ||
− | | | + | | apply hack to change default compiler for perl modules back to plain cc |
− | + | | Just because we built perl with 4.7 doesn't mean we want the same to apply to perl modules (it had proved a massive PITA because there was nothing to pull it in) | |
− | | we | + | | local change likely to be kept until debian makes 4.7 the default on armhf |
− | | local change | ||
| | | | ||
|- | |- | ||
Line 244: | Line 205: | ||
| add build-depends on gcc-4.7 | | add build-depends on gcc-4.7 | ||
| package was trying to build with 4.7 (likely because we built perl with it) | | package was trying to build with 4.7 (likely because we built perl with it) | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
| local change likely to be kept until debian makes 4.7 the default on armhf | | local change likely to be kept until debian makes 4.7 the default on armhf | ||
| | | | ||
Line 286: | Line 235: | ||
| package was trying to build with 4.7 (likely because we built perl with it) | | package was trying to build with 4.7 (likely because we built perl with it) | ||
| local change likely to be kept until debian makes 4.7 the default on armhf | | local change likely to be kept until debian makes 4.7 the default on armhf | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
| | | | ||
|- | |- | ||
Line 303: | Line 240: | ||
| add build-depends on gcc-4.7 | | add build-depends on gcc-4.7 | ||
| package was trying to build with 4.7 (likely because we built perl with it) | | package was trying to build with 4.7 (likely because we built perl with it) | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
| local change likely to be kept until debian makes 4.7 the default on armhf | | local change likely to be kept until debian makes 4.7 the default on armhf | ||
| | | | ||
Line 366: | Line 297: | ||
| | | | ||
|- | |- | ||
− | + | | fpc | |
| change compiler defaults | | change compiler defaults | ||
| We need the right compiler defaults for raspbian | | We need the right compiler defaults for raspbian | ||
Line 372: | Line 303: | ||
| | | | ||
|- | |- | ||
− | | | + | | hercules |
− | | | + | | change build-depends and debian/rules to build with gcc-4.7 |
− | | | + | | gcc 4.6 failed to build package with ICE |
+ | | local change likely to be kept until debian makes 4.7 the default on armhf | ||
+ | | | ||
+ | |- | ||
+ | | libavg | ||
+ | | set architecture list to any and add a fallback option for some debug related inline assembler | ||
+ | | package was requested by user | ||
+ | | bug [http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=683105 683105] filed in debian | ||
+ | | | ||
+ | |- | ||
+ | | gdal | ||
+ | | add build-depends on gcc-4.7 | ||
+ | | package was trying to build perl related code with 4.7 (likely because we built perl with it) | ||
+ | | local change likely to be kept until debian makes 4.7 the default on armhf | ||
+ | | when building manually make sure only the correct ruby version is installed or build will fail | ||
+ | |- | ||
+ | | libgeotiff-dfsg | ||
+ | | add libgeotiff-alt-dev binary package without static library or dependency on libtiff5-dev | ||
+ | | rowspan=2 | xastir was requested by user and it's build-depends could not be satisfied due to conflict between libtiff4-dev and libtiff5-dev | ||
+ | | rowspan=2 | patches sent to existing bug report [http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=666589 666589] in debian | ||
+ | | | ||
+ | |- | ||
+ | | xastir | ||
+ | | change build-dependencies from libgeotiff-dev to libgeotiff-alt-dev | ||
+ | | | ||
+ | |- | ||
+ | | rowspan=2 | openjdk-7 | ||
+ | | Alter openjdk/hotspot/src/cpu/zero/vm/cppInterpreter_arm.S for armv6 | ||
+ | | arm version directives in the aforementioned file were making libjvm.so in openjdk-6-jre-headless come out armv7 dirty | ||
+ | | Probablly not suitable for pushing upstream in present form, may be able to be made suitable with extra conditionalising | ||
+ | | | ||
+ | |- | ||
+ | | Update to newer version from experimental | ||
+ | | libjvm-so in icedtex6-jre-jamvm from the testing/unstable version was coming out with armv7 code in it | ||
+ | | Hopefully debian testing/unstable will get this new version soon. | ||
+ | | | ||
+ | |- | ||
+ | | libxml-libxml-perl | ||
+ | | add build-depends on gcc-4.7 | ||
+ | | package was trying to build with 4.7 (likely because we built perl with it) | ||
+ | | local change likely to be kept until debian makes 4.7 the default on armhf | ||
+ | | | ||
+ | |- | ||
+ | | rowspan=3 | clisp | ||
+ | | add armhf to architecture lists | ||
+ | | armhf was not in architecture lists and package was requested by user | ||
+ | | rowspan=2 | bug [http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=684631 684631] filed in debian. | ||
+ | | | ||
+ | |- | ||
+ | | apply patch from sourceforge to fix operation on modern arm | ||
+ | | package failed to build with illegal instruction error while running newly built clisp binary | ||
+ | | | ||
+ | |- | ||
+ | | build with gcc-4.7 | ||
+ | | build failed with ICE | ||
+ | | local change likely to be kept until debian makes 4.7 the default on armhf | ||
+ | | | ||
+ | |- | ||
+ | | libccrtp1 | ||
+ | | new source package based on old version of libccrtp source package with renamed dev and doc packages | ||
+ | | twinkle needed an older version of libccrtp | ||
+ | | local change for raspbian wheezy. For jessie I plan to clean up packages that are no longer in debian and tell users to install them from wheezy. | ||
+ | | | ||
+ | |- | ||
+ | | libzrtpcpp1 | ||
+ | | new source package based on old version of libzrtpcpp1 source package with renamed dev package | ||
+ | | current version of libzrtpcpp is not compatible with the version of libccrtp needed for twinkle. | ||
+ | | local change for raspbian wheezy. For jessie I plan to clean up packages that are no longer in debian and tell users to install them from wheezy. | ||
+ | | | ||
+ | |- | ||
+ | | twinkle | ||
+ | | retintroduce package and change build-depends to libccrtp1 and libzrtcpp1 | ||
+ | | User requested package and current versions of libccrtp and libzrtpcpp are not compatible with twinkle. | ||
+ | | local change for raspbian wheezy. For jessie I plan to clean up packages that are no longer in debian and tell users to install them from wheezy. | ||
+ | | | ||
+ | |- | ||
+ | | rrdtool | ||
+ | | add build-depends on gcc-4.7 | ||
+ | | package was trying to build perl related stuff with gcc-4.7 (likely because we built perl with it) | ||
+ | | local change likely to be kept until debian makes gcc-4.7 the default on armhf. | ||
+ | | | ||
+ | |- | ||
+ | | obexftp | ||
+ | | add build-depends on gcc-4.7 | ||
+ | | package was trying to build perl related stuff with gcc-4.7 (likely because we built perl with it) | ||
+ | | local change likely to be kept until debian makes gcc-4.7 the default on armhf. | ||
+ | | | ||
+ | |- | ||
+ | | rowspan=3 | libreoffice | ||
+ | | use version from experimental | ||
+ | | testing/unstable version has a fragile build system that was causing us problems | ||
+ | | bug [http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=685723 685723] filed in debian (and marked as fixed in experimental) | ||
+ | | | ||
+ | |- | ||
+ | | change build-dependencies from libclucene-dev and libcmis-dev to (raspbian specific) libclucene-dev-experimental and libcmis-dev-experimental | ||
+ | | experimental version of libreoffice needed newer versions of libclucene and libcmis than were present in wheezy | ||
+ | | local hack, hopefully can be dropped post-wheezy | ||
+ | | | ||
+ | |- | ||
+ | | disable testsuite | ||
+ | | testsuite seemed to be failing on debian armhf in experimental and there isn't much we can do about testsuite failures anyway | ||
+ | | local hack hopefully can be dropped later. | ||
+ | | | ||
+ | |- | ||
+ | | clucene-core-experimental | ||
+ | | raspbian specific source package based on experimental version of clucene-core with renamed source package and dev package | ||
+ | | experimental version of libreoffice needed newer versions of libclucene than was present in wheezy | ||
+ | | local hack, hopefully can be dropped post-wheezy | ||
+ | | | ||
+ | |- | ||
+ | | libcmis-experimental | ||
+ | | raspbian specific source package based on experimental version of libcmis with renamed source package and dev package and removed client package | ||
+ | | experimental version of libreoffice needed newer versions of libcmis than was present in wheezy | ||
+ | | local hack, hopefully can be dropped post-wheezy | ||
+ | | | ||
+ | |- | ||
+ | | libcdr | ||
+ | | bring in new package from experimental (not present in debian wheezy) | ||
+ | | experimental version of libreoffice needed libcdr | ||
+ | | hopefully package will enter debian testing post-wheezy | ||
+ | | | ||
+ | |- | ||
+ | | libheimdal-kadm5-perl | ||
+ | | add build-depends on gcc-4.7 | ||
+ | | package was trying to build with 4.7 (likely because we built perl with it) | ||
+ | | local change likely to be kept until debian makes 4.7 the default on armhf | ||
+ | | | ||
+ | |- | ||
+ | | libgeo-ip-perl | ||
+ | | add build-depends on gcc-4.7 | ||
+ | | package was trying to build with 4.7 (likely because we built perl with it) | ||
+ | | local change likely to be kept until debian makes 4.7 the default on armhf | ||
+ | | | ||
+ | |- | ||
+ | | "commit" changes to config.sub and config.guess | ||
+ | | source package could not be built after running clean target due to config.sub and config.guess changes | ||
+ | | bug [http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=690112 690112] filed in debian. | ||
+ | | | ||
+ | |- | ||
+ | | abiword | ||
+ | | remove build-depends on valgrind | ||
+ | | we don't currently have valgrind in debian and abiword doesn't really need it (it's only used to run build-time tests) | ||
+ | | local change to be kept until/unless someone ports valgrind successfully. | ||
+ | | | ||
+ | |- | ||
+ | | klibc | ||
+ | | change build settings | ||
+ | | existing compiler settings were not suitable for raspbian | ||
+ | | local change not suitable for pushing upstream | ||
+ | | | ||
+ | |- | ||
+ | | webkit | ||
+ | | disable JIT | ||
+ | | JIT doesn't seem to work on sub-armv7 | ||
+ | | should probablly be dealt with in debian too but someone else can fight that battle | ||
+ | | 1.8.1-3.3 has no changes over 1.8.1-2 that I consider important for raspbian (the only one that is even vaugely relavent is a change of compression format) so there is currently no-point in doing a forward port. | ||
+ | |- | ||
+ | | libgpod | ||
+ | | enable cil packages for armhf | ||
+ | | unlike debian armhf we plan to ship mono in raspbian. | ||
+ | | change will be raspbian specific for wheezy and should be pushed to debian after wheezy release. | ||
+ | | | ||
+ | |- | ||
+ | | eglibc | ||
+ | | add more tests to list of expected failures | ||
+ | | some tests failed for us and we don't have the resources to debug them | ||
+ | | Local hack, hopefully can be dropped later. | ||
+ | | | ||
+ | |- | ||
+ | | rowspan=2 | lsb | ||
+ | | change apt scanning to look for Raspbian rather than Debian | ||
+ | | lsb_release was not giving codename correctly and this was causing pain for users | ||
+ | | Permanent raspbian change. | ||
+ | | | ||
+ | |- | ||
+ | | Disable testsuite | ||
+ | | Testsuite was failing and seems to be broken | ||
+ | | bug [http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=699589 699589] filed in debian | ||
| | | | ||
|- | |- | ||
− | | | + | | ceph |
− | + | | disable use of libatomic-ops | |
− | | | + | | libatomic-ops and ceph don't seem to work together on plain armv6 |
+ | | most likely permanent raspbian change | ||
| | | | ||
|} | |} |
Revision as of 17:54, 18 February 2013
Raspbian is a project to create a hard float port of debian for the Raspberry Pi and similar devices which use ARMv6 processors with VFPv2. The official Debian armhf packages are built with ARMv7, VFPv3_D16 and Thumb2. So they are not suitable for the Pi and similar devices. To get round this we have to change the compiler defaults (easy) and recompile everything (harder than it sounds).
Infrastructure has been set-up for building packages. We aim to stay as close to Debian wheezy as possible but we will pull in packages from sid and/or make our own modifications when we deem it necessary.
A chroot can be bootstrapped from a Debian squeeze armel installation using the following commands (replace /chroots/wheezy-armhf-rpi with where you want your chroot).
debootstrap --arch=armhf wheezy /chroots/wheezy-armhf-rpi http://archive.raspbian.org/raspbian cd /chroots/wheezy-armhf-rpi wget http://archive.raspbian.org/raspbian.public.key chroot /chroots/wheezy-armhf-rpi mount -t proc proc /proc apt-key add raspbian.public.key apt-get update
If you just want to install the minimum number of packages add a --variant=minbase to the bootstrap command
Since this is running in a chroot you probably don't want it attempting to start and stop services when you update packages. To avoid this create a file /usr/sbin/policy-rc.d with the following commands
cat << EOD >/usr/sbin/policy-rc.d #!/bin/sh echo "rc.d operations disabled for chroot" exit 101 EOD chmod 0755 /usr/sbin/policy-rc.d
Modified packages
Note: this list is incomplete
Source package | Changes | Reason | Status | Notes |
---|---|---|---|---|
elfutils | testsuite disabled | testsuite failed on plugwash's build system and package was needed | local hack, hopefully we can drop later. | |
gcc-4.6 | change compiler defaults | need to build binaries suitable for rpi | permanent raspbian change, not suitable for pushing upstream | |
gcc-4.5 | change compiler defaults | need to build binaries suitable for rpi | permanent raspbian change, not suitable for pushing upstream | |
treat wheezy the same as sid | compiler built in wheezy was passing --as-needed to the linker which we don't want | could potentially be pushed upstream to debian but given they intend to get rid of the package in the not too distant future i'm not sure there is much point | ||
disable testsuite | gcc testsuite takes ages and we don't have the resources to do anything about failures anyway, especially for a non-default compiler version | local hack, may be dropped later (but probablly won't) | ||
subversion | newer version from sid | plugwash thought package was about to migrate to wheezy but it didn't actually migrate | not much we can do about this :( | |
git | testsuite disabled | testsuite failed and package was needed | seems to be a subversion related issue (debian bug 678137), fixed in debian sid but we will have to carry our own patch for wheezy. | |
libatomic-ops | fixed support for armv6 | package failed to build with assembler errors | undecided on whether to push upstream or keep as a local change | |
gcj-4.6 | change compiler defaults | need to build binaries suitable for rpi | permanent raspbian change, not suitable for pushing upstream | |
disable testsuite | gcc testsuite takes ages and we don't have the resources to do anything about failures anyway, especially for a non-default compiler version | local hack, may be dropped later (but probablly won't) | ||
openjdk-6 | Alter arm_port/hotspot/src/cpu/zero/vm/cppInterpreter_arm.S for armv6 | arm version directives in the aforementioned file were making libjvm.so in openjdk-6-jre-headless come out armv7 dirty | Probablly not suitable for pushing upstream in present form, may be able to be made suitable with extra conditionalising | |
Update jamvm | libjvm-so in icedtex6-jre-jamvm with old jamvm was coming out with armv7 code in it | Likely to be kept as a local change in raspbian for wheezy. Openjdk-6 is likely to be dropped completely for jessie. | ||
qt4-x11 | Disable neon | armv6 doesn't have neon (and not all armv7 systems do either) | Debian armhf isn't supposed to require NEON either. Working out whether this should be pushed upstream would require working out if there is any runtime checking for neon in QT which I (plugwash) don't have time for ATM. | Building documentation on raspbian seems to hang, when updating package a source+all upload should be built on amd64 or similar. The buildds can then fill in the remaining binaries. |
x264 | Disable build of neon vairant | neon variant sets of our v7 contamination checker which could possiblly obscure real problems. | Not suitable for pushing upstream. May be dropped if our contamination checker gets smarter. | |
libvpx | Disable build of neon vairant | neon variant sets of our v7 contamination checker which could possiblly obscure real problems. | Not suitable for pushing upstream. May be dropped if our contamination checker gets smarter. | |
guile-2.0 | testsuite disabled | testsuite failed on plugwash's build system and package was needed | testsuite fails for debian as well, hopefully they will fix it at some point. | |
pyopenssl | seperate build-arch and build-indep | documentation build was silently failing (causing a file not found error later) on raspbian | Bug 675414submitted to debian for build-arch/build-indep split and has been fixed in experimental. No idea on root cause of documentation build issue. | |
perl | change build-depends and debian/config.debian to build with gcc-4.7 | gcc 4.6 failed to build package with ICE | local change likely to be kept until debian makes 4.7 the default on armhf | |
apply hack to change default compiler for perl modules back to plain cc | Just because we built perl with 4.7 doesn't mean we want the same to apply to perl modules (it had proved a massive PITA because there was nothing to pull it in) | local change likely to be kept until debian makes 4.7 the default on armhf | ||
libmediainfo | change build-depends and debian/config.debian to build with gcc-4.7 | gcc 4.6 failed to build package with ICE | local change likely to be kept until debian makes 4.7 the default on armhf | |
libpd-stats-perl | add build-depends on gcc-4.7 | package was trying to build with 4.7 (likely because we built perl with it) | local change likely to be kept until debian makes 4.7 the default on armhf | |
libdevice-cdio-perl | add build-depends on gcc-4.7 | package was trying to build with 4.7 (likely because we built perl with it) | local change likely to be kept until debian makes 4.7 the default on armhf | |
rhash | add build-depends on gcc-4.7 | package was trying to build with 4.7 (likely because we built perl with it) | local change likely to be kept until debian makes 4.7 the default on armhf | |
frozen-bubble | add build-depends on gcc-4.7 | package was trying to build with 4.7 (likely because we built perl with it) | local change likely to be kept until debian makes 4.7 the default on armhf | |
libasync-interrupt-perl | add build-depends on gcc-4.7 | package was trying to build with 4.7 (likely because we built perl with it) | local change likely to be kept until debian makes 4.7 the default on armhf | |
gcc-4.7 | change compiler defaults | need to build binaries suitable for rpi | permanent raspbian change, not suitable for pushing upstream | |
disable testsuite | gcc testsuite takes ages and we don't have the resources to do anything about failures anyway, especially for a non-default compiler version | local hack, may be dropped later (but probablly won't) | ||
tcsh | testsuite disabled | testsuite failed and we needed to get update built to keep source and binary in sync | local hack, hopefully we can drop later. | |
libfilter-perl | add build-depends on gcc-4.7 | package was trying to build with 4.7 (likely because we built perl with it) | local change likely to be kept until debian makes 4.7 the default on armhf | |
libb-hooks-parser-perl | add build-depends on gcc-4.7 | package was trying to build with 4.7 (likely because we built perl with it) | local change likely to be kept until debian makes 4.7 the default on armhf | |
pspp | add build-depends on gcc-4.7 | package was trying to build perl related code with 4.7 (likely because we built perl with it) | local change likely to be kept until debian makes 4.7 the default on armhf | |
disable testsuite | testsuite failed and we don't have the resources to troubleshoot it | local hack which hopefully can be dropped later | ||
libvariable-magic-perl | add build-depends on gcc-4.7 | package was trying to build with 4.7 (likely because we built perl with it) | local change likely to be kept until debian makes 4.7 the default on armhf | |
libmath-tamuanova-perl | add build-depends on gcc-4.7 | package was trying to build with 4.7 (likely because we built perl with it) | local change likely to be kept until debian makes 4.7 the default on armhf | |
nkf | add build-depends on gcc-4.7 | package was trying to build with 4.7 (likely because we built perl with it) | local change likely to be kept until debian makes 4.7 the default on armhf | |
libxml-xerces-perl | add build-depends on gcc-4.7 | package was trying to build with 4.7 (likely because we built perl with it) | local change likely to be kept until debian makes 4.7 the default on armhf | |
libtemplate-perl | add build-depends on gcc-4.7 | package was trying to build with 4.7 (likely because we built perl with it) | local change likely to be kept until debian makes 4.7 the default on armhf | |
libsys-cpu-perl | add build-depends on gcc-4.7 | package was trying to build with 4.7 (likely because we built perl with it) | local change likely to be kept until debian makes 4.7 the default on armhf | |
libsort-key-perl | add build-depends on gcc-4.7 | package was trying to build with 4.7 (likely because we built perl with it) | local change likely to be kept until debian makes 4.7 the default on armhf | |
libpadwalker-perl | add build-depends on gcc-4.7 | package was trying to build with 4.7 (likely because we built perl with it) | local change likely to be kept until debian makes 4.7 the default on armhf | |
libmoose-perl | add build-depends on gcc-4.7 | package was trying to build with 4.7 (likely because we built perl with it) | local change likely to be kept until debian makes 4.7 the default on armhf | |
libipc-sharelite-perl | add build-depends on gcc-4.7 | package was trying to build with 4.7 (likely because we built perl with it) | local change likely to be kept until debian makes 4.7 the default on armhf | |
libcoro-perl | add build-depends on gcc-4.7 | package was trying to build with 4.7 (likely because we built perl with it) | local change likely to be kept until debian makes 4.7 the default on armhf | |
libsocket-perl | add build-depends on gcc-4.7 | package was trying to build with 4.7 (likely because we built perl with it) | local change likely to be kept until debian makes 4.7 the default on armhf | |
fpc | change compiler defaults | We need the right compiler defaults for raspbian | Permanent raspbian change not suitable for pushing upstream | |
hercules | change build-depends and debian/rules to build with gcc-4.7 | gcc 4.6 failed to build package with ICE | local change likely to be kept until debian makes 4.7 the default on armhf | |
libavg | set architecture list to any and add a fallback option for some debug related inline assembler | package was requested by user | bug 683105 filed in debian | |
gdal | add build-depends on gcc-4.7 | package was trying to build perl related code with 4.7 (likely because we built perl with it) | local change likely to be kept until debian makes 4.7 the default on armhf | when building manually make sure only the correct ruby version is installed or build will fail |
libgeotiff-dfsg | add libgeotiff-alt-dev binary package without static library or dependency on libtiff5-dev | xastir was requested by user and it's build-depends could not be satisfied due to conflict between libtiff4-dev and libtiff5-dev | patches sent to existing bug report 666589 in debian | |
xastir | change build-dependencies from libgeotiff-dev to libgeotiff-alt-dev | |||
openjdk-7 | Alter openjdk/hotspot/src/cpu/zero/vm/cppInterpreter_arm.S for armv6 | arm version directives in the aforementioned file were making libjvm.so in openjdk-6-jre-headless come out armv7 dirty | Probablly not suitable for pushing upstream in present form, may be able to be made suitable with extra conditionalising | |
Update to newer version from experimental | libjvm-so in icedtex6-jre-jamvm from the testing/unstable version was coming out with armv7 code in it | Hopefully debian testing/unstable will get this new version soon. | ||
libxml-libxml-perl | add build-depends on gcc-4.7 | package was trying to build with 4.7 (likely because we built perl with it) | local change likely to be kept until debian makes 4.7 the default on armhf | |
clisp | add armhf to architecture lists | armhf was not in architecture lists and package was requested by user | bug 684631 filed in debian. | |
apply patch from sourceforge to fix operation on modern arm | package failed to build with illegal instruction error while running newly built clisp binary | |||
build with gcc-4.7 | build failed with ICE | local change likely to be kept until debian makes 4.7 the default on armhf | ||
libccrtp1 | new source package based on old version of libccrtp source package with renamed dev and doc packages | twinkle needed an older version of libccrtp | local change for raspbian wheezy. For jessie I plan to clean up packages that are no longer in debian and tell users to install them from wheezy. | |
libzrtpcpp1 | new source package based on old version of libzrtpcpp1 source package with renamed dev package | current version of libzrtpcpp is not compatible with the version of libccrtp needed for twinkle. | local change for raspbian wheezy. For jessie I plan to clean up packages that are no longer in debian and tell users to install them from wheezy. | |
twinkle | retintroduce package and change build-depends to libccrtp1 and libzrtcpp1 | User requested package and current versions of libccrtp and libzrtpcpp are not compatible with twinkle. | local change for raspbian wheezy. For jessie I plan to clean up packages that are no longer in debian and tell users to install them from wheezy. | |
rrdtool | add build-depends on gcc-4.7 | package was trying to build perl related stuff with gcc-4.7 (likely because we built perl with it) | local change likely to be kept until debian makes gcc-4.7 the default on armhf. | |
obexftp | add build-depends on gcc-4.7 | package was trying to build perl related stuff with gcc-4.7 (likely because we built perl with it) | local change likely to be kept until debian makes gcc-4.7 the default on armhf. | |
libreoffice | use version from experimental | testing/unstable version has a fragile build system that was causing us problems | bug 685723 filed in debian (and marked as fixed in experimental) | |
change build-dependencies from libclucene-dev and libcmis-dev to (raspbian specific) libclucene-dev-experimental and libcmis-dev-experimental | experimental version of libreoffice needed newer versions of libclucene and libcmis than were present in wheezy | local hack, hopefully can be dropped post-wheezy | ||
disable testsuite | testsuite seemed to be failing on debian armhf in experimental and there isn't much we can do about testsuite failures anyway | local hack hopefully can be dropped later. | ||
clucene-core-experimental | raspbian specific source package based on experimental version of clucene-core with renamed source package and dev package | experimental version of libreoffice needed newer versions of libclucene than was present in wheezy | local hack, hopefully can be dropped post-wheezy | |
libcmis-experimental | raspbian specific source package based on experimental version of libcmis with renamed source package and dev package and removed client package | experimental version of libreoffice needed newer versions of libcmis than was present in wheezy | local hack, hopefully can be dropped post-wheezy | |
libcdr | bring in new package from experimental (not present in debian wheezy) | experimental version of libreoffice needed libcdr | hopefully package will enter debian testing post-wheezy | |
libheimdal-kadm5-perl | add build-depends on gcc-4.7 | package was trying to build with 4.7 (likely because we built perl with it) | local change likely to be kept until debian makes 4.7 the default on armhf | |
libgeo-ip-perl | add build-depends on gcc-4.7 | package was trying to build with 4.7 (likely because we built perl with it) | local change likely to be kept until debian makes 4.7 the default on armhf | |
"commit" changes to config.sub and config.guess | source package could not be built after running clean target due to config.sub and config.guess changes | bug 690112 filed in debian. | ||
abiword | remove build-depends on valgrind | we don't currently have valgrind in debian and abiword doesn't really need it (it's only used to run build-time tests) | local change to be kept until/unless someone ports valgrind successfully. | |
klibc | change build settings | existing compiler settings were not suitable for raspbian | local change not suitable for pushing upstream | |
webkit | disable JIT | JIT doesn't seem to work on sub-armv7 | should probablly be dealt with in debian too but someone else can fight that battle | 1.8.1-3.3 has no changes over 1.8.1-2 that I consider important for raspbian (the only one that is even vaugely relavent is a change of compression format) so there is currently no-point in doing a forward port. |
libgpod | enable cil packages for armhf | unlike debian armhf we plan to ship mono in raspbian. | change will be raspbian specific for wheezy and should be pushed to debian after wheezy release. | |
eglibc | add more tests to list of expected failures | some tests failed for us and we don't have the resources to debug them | Local hack, hopefully can be dropped later. | |
lsb | change apt scanning to look for Raspbian rather than Debian | lsb_release was not giving codename correctly and this was causing pain for users | Permanent raspbian change. | |
Disable testsuite | Testsuite was failing and seems to be broken | bug 699589 filed in debian | ||
ceph | disable use of libatomic-ops | libatomic-ops and ceph don't seem to work together on plain armv6 | most likely permanent raspbian change |