Rpi expansion boards

From eLinux.org
Revision as of 07:55, 26 January 2012 by Phoque (talk | contribs) (Category)
Jump to: navigation, search

On the Raspberry Pi, there are several connections which can be used for expansion:

  • The Rpi GPIO (General Purpose Input/Output) pins are exposed, that means that expansion boards are able to talk directly to the CPU.
  • The DSI connector will allow low-level interfacing with LCDs and other displays.
  • The CSI connector will allow camera modules to be added in future.

Current expansion boards


main page: Rpi Gertboard

This board is a buffer between your Rpi and the real world, use it to flash LEDs on and off, drive motors, run sensors and all that other fun stuff.[1]


Piface is simpler than the Rpi GertBoard (it's aimed at less experienced users), but also intended to connect to PCs and Android to be platform agnostic