All public logs
Combined display of all available logs of eLinux.org. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).
- 13:15, 24 September 2009 A0389051 (talk | contribs) uploaded File:Auto rts.patch (Forces the RTS pin into mux SAFE mode when omap-serial driver is shutdown. Thereby making sure RTS is de-asserted when device goes into low-power mode.)
- 13:09, 24 September 2009 A0389051 (talk | contribs) uploaded File:Ts uart.tar.bz2 (The OMAP UART test application. Same application (with different parameters) are used on both sender and receiver side.)
- 12:58, 24 September 2009 A0389051 (talk | contribs) uploaded File:Zoom1 8250.patch (This patch enables a sysfs-interface to toggling the UART1 RTS pin via the 8250 serial driver.)
- 12:44, 24 September 2009 A0389051 (talk | contribs) uploaded File:UART pm debugging fig3.JPG (A close-up of the DB-9 connector on the expansion card, along with general information on the line routing in the null-modem cable.)
- 12:38, 24 September 2009 A0389051 (talk | contribs) uploaded File:UART pm debugging fig2.JPG (The expansion card connector to the boards via the 200-pin connector.)
- 12:37, 24 September 2009 A0389051 (talk | contribs) uploaded a new version of File:UART pm debugging fig1.JPG (Reverted to version as of 16:24, 24 September 2009)
- 12:37, 24 September 2009 A0389051 (talk | contribs) uploaded a new version of File:UART pm debugging fig1.JPG (The expansion card plugged into the 200-pin connector.)
- 09:24, 24 September 2009 A0389051 (talk | contribs) uploaded File:UART pm debugging fig1.JPG (Shows the interconnection of a Zoom2 and Zoom1 board, which enables testing of UART connection during power management)
- 08:42, 24 September 2009 User account A0389051 (talk | contribs) was created