Search results

Jump to: navigation, search
  • ...to receive Linux support from ARM. The Core Module that is attached to the AP or CP board has a test chip for an ARM CPU, a RAM SIMM module connector and * The '''Integrator/AP''' is a basic board with two UART ports, timer, RTC and NOR Flash. The boar
    3 KB (469 words) - 21:23, 29 April 2019
  • | For use with or without AP
    1 KB (192 words) - 12:39, 17 November 2008
  • ''For use with or without AP Network discovery. To find wireless access, auto connect.''
    2 KB (314 words) - 02:31, 14 July 2007
  • ...s associated with an access point, and much of the info is related to that AP. * Shows current mode, and the AP's MAC address
    2 KB (292 words) - 11:13, 24 September 2007
  • null::sysinit:/sbin/iwconfig wlan0 ap <Your wireless access point ID>
    1 KB (236 words) - 20:06, 3 June 2008
  • - Core#0: DBG-AP at 0xD4011000
    17 KB (2,599 words) - 01:57, 28 November 2012
  • * AP Channel bandwidth is 20 MHZ * AP Channel bandwidth is 40 MHZ
    12 KB (1,587 words) - 16:42, 11 October 2015
  • dap apid return id reg from AP [num], default currently selected AP
    44 KB (5,310 words) - 10:07, 12 August 2012
  • wpa-ssid <NAME OF AP> wpa-ap-scan 1
    21 KB (3,152 words) - 07:47, 13 March 2020
  • ...HOR.COM of China], TI 600MHz CORETEX-A8 + 430MHz TMS320C64x+ dual core SOC/AP,120pin out, 40x40x3.5mm
    20 KB (2,861 words) - 21:51, 11 December 2019
  • ** PC to AP: FF 20 07 00 00 00 00 ** PC to AP: FF 07 03
    14 KB (2,032 words) - 13:02, 11 November 2011
  • ...interest to note that there have been massive changes to wl12xx to support ap functionality, as well as massive changes in drivers/video/omap2/dss/.
    9 KB (1,475 words) - 14:31, 27 October 2011
  • connectivity devices: '''station''' and '''Access Point''' (AP). AP acts like a server, cabled to the wired network to allow wireless ...nts access other networks. Stations are then the clients of the respective AP.
    3 KB (406 words) - 01:37, 27 October 2011
  • :::[[File:SBC8530-AP-S.png|SBC8530单板机]]
    5 KB (281 words) - 01:37, 19 December 2011
  • Jetson TX1's WiFi controller can be run in Access Point (AP) hot-spot mode, enabling TX1 to host it's own WiFi network.
    911 bytes (136 words) - 12:17, 17 June 2016
  • ...ecified by the manufacturers being qualified from 0°C to 70°C, while the AP is qualified from -40°C to 85'''°'''C. You may well find that the board w
    16 KB (2,712 words) - 14:39, 9 April 2013
  • ...ecified by the manufacturers being qualified from 0°C to 70°C, while the AP is qualified from -40°C to 85<strong>°</strong>C. You may well find that
    16 KB (2,781 words) - 07:05, 6 March 2012
  • ...s ID register from AP <var>num</var>, defaulting to the currently selected AP. : Select AP <var>num</var>, defaulting to 0.
    525 KB (71,464 words) - 06:53, 11 May 2012
  • char *kvasprintf(gfp_t gfp, const char *fmt, va_list ap) char *kvasprintf(gfp_t gfp, const char *fmt, va_list ap)
    38 KB (5,612 words) - 10:17, 17 January 2013
  • ...e that supports "Access Point" mode; the [[Raspberry Pi 3]] has a built-in AP Wi-Fi module.
    10 KB (1,629 words) - 06:57, 5 August 2018

View (previous 20 | next 20) (20 | 50 | 100 | 250 | 500)