View source for Talk:Community

Boardcon1 (talk)

Feel free to add this content to the applicable page.

I have connected my pi using putty and xming, please can anyone tell me how to use laptop webcamera instead of using an external usb camera through the raspberry pi b+ model and then connecting that camera remotely to any other device?

I have connected my pi using putty and xming, please can anyone tell me how to use laptop webcamera instead of using an external usb camera through the raspberry pi b+ model and then connecting that camera remotely to any other device?

Dear reader,

How to extend RaspberryPi, BeagleBoard, Arduino ... with lots of I/O's? My friend and I developed a solution. We launched a Indiegogo campaign where we offer a series of digital I/O modules: http://igg.me/at/kunio

Via an SPI bus + some I/O pins, or just up to 7 simple I/O pins, you can add a huge number of digital in- and outputs in a modular way. By using any microcontroller or Single Board Computer of your choice (RaspberryPi, BeagleBoard, Arduino,...), you can create a powerful device (PLC) that is accessible from the internet and has lots of storage and features using your own development tools.

If you are convinced of these products, please help us raising funds so we can produce our first modules and bring them to market! The next step is to add more analogue inputs and outputs to this concept, without the need for more I/O pins. I hope you enjoy this...

Hi, I'd like to turn my RPi into a speedo (instrumentation display) for my motorbike. That means I need a small waterproof LCD to hook into the RPi. Does anyone know of a good screen for this type of application or can link me to an option or 2?

Many thanks.

Sorry for multiple posts, hit enter a few times doing my signature for new lines and it posted..

Sorry, no idea. Google would be your best bet.

Hi, I'd like to turn my RPi into a speedo (instrumentation display) for my motorbike. That means I need a small waterproof LCD to hook into the RPi. Does anyone know of a good screen for this type of application or can link me to an option or 2?

Many thanks.

Hello,

What type of SD card used for mounting u-boot, SPL and uImage for my WB Q board ?? particularly which type of can I use ??

Because at first time I used 2 GB scan disk card and then mount SPL, u-boot and uImage as WB give on their website. That type board start successfully without any problem and get u-boot prompt in minicom via serial.

But actually I stuck now on other issue.

2nd time when I start my board its not boot up.

I make SD card approx 12015 times, all type of available process and method I use ?? but ........ no u-boot prompt I get.

I use ubuntu 14.04 LTS as host machine and minicom s/w and null cable. so what the correct method to make SD card please please provide me in detail very soon. ????

and what is requirements for SD card to make it boot able in WB Q board ????

please please reply me very very soon.

Tell me in brief.

Thanks

regards Jaymin D

Jaymin,

This forum is for discussions about the elinux wiki, and not for general embedded linux support.

-- Tim

Hello,

What type of SD card used for mounting u-boot, SPL and uImage for my WB Q board ?? particularly which type of can I use ??

Because at first time I used 2 GB scan disk card and then mount SPL, u-boot and uImage as WB give on their website. That type board start successfully without any problem and get u-boot prompt in minicom via serial.

But actually I stuck now on other issue.

2nd time when I start my board its not boot up.

I make SD card approx 12015 times, all type of available process and method I use ?? but ........ no u-boot prompt I get.

I use ubuntu 14.04 LTS as host machine and minicom s/w and null cable. so what the correct method to make SD card please please provide me in detail very soon. ????

and what is requirements for SD card to make it boot able in WB Q board ????

please please reply me very very soon.

Tell me in brief.

Thanks

regards Jaymin D

I bought a Beaglebone black a week ago and cannot get it running. I have a normal Beaglebone that works fine, but the black just does nothing. It seems to boot according to the LEDS, but I do not get a mass storage device registered. I have tried different cables, computers on both windows and Linux. I have tried the procedure described on eLinux.org for trouble installing USB drivers, but when I run EEPROMA5.BAT it fails with the message "No devices found" and in red "Device 0 does not exist"

I do not know what else to try.

I would suggest posting your problem to the Beagle mailing list here:

Beagleboard Forum