View source for Talk:R-Car/Boards/M3SK

From eLinux.org
Jump to: navigation, search

We have moved QA page to Renesas Rulz site.
Please submit a question to new site.
URL: http://renesasrulz.com/r-car-h3-m3-cockpit/

Documentation on how to develop an specific application on R-CAR M3.

Hi,


I recently acquire a Renesas R Car M3 board which runs on an embedded linux image build by means of the Yocto project. Currently we are using YOCTO 3.9.0.

By doing a research on the web I find out that there is almost no information regarding the use of the board. The page elinux.org is the place where I have found documentation about this board but still it is not enough.

We are interested on doing the following:

Running ROS kinetic libraries on this board.

Developing a very simple HMI.

Using the CAN BUS for data transmission.

Do you know where can I find guidance with respect to this topics?

22:33, 22 February 2019

H3/M3 Starter Kit doesn't have a CAN connector.

Do the following pages help you? https://elinux.org/R-Car/Boards/Kingfisher http://www.shimafuji.co.jp/products/1450

01:35, 17 April 2019
 

Booting of kernel stops at [ 23.047503] mmc0: error -110 whilst initialising MMC card

Hi, I am trying to boot Linux on a Renesas M3SK. I have follow the wiki available on #REDIRECT 1 and I have successfully build a YOCTO image with the version 3.9.0.

Right now I am trying to boot linux from an SD card via serial communication, but kernel boot stops at the following message [ 23.047503] mmc0: error -110 whilst initialising MMC card

Looking through the internet I found out that it is very important to define correctly the number of the device and partition for which the booting will take place. They are two main options mmcblk0p1 and mmcblk1p1. I only made one partition on the SD card and tag it with #1, so the only thing left is to define the number associate to the board. I have tried with both, mmcblk0p1 and mmcblk1p1 and none of them has properly work. Each of them gave me a different error. Please refer to the section Booting logs for a more detailed information.

I have also find a patch available at #REDIRECT 2 but I have not understand what is this patch for and if it is going to help me with my problem.

Could someone give me a solution to this?

Booting logs for mmcblk0p1

  • sudo picocom --baud 115200 /dev/ttyUSB0
  • [sudo] password:
  • picocom v1.7
  • port is  : /dev/ttyUSB0
  • flowcontrol  : none
  • baudrate is  : 115200
  • parity is  : none
  • databits are  : 8
  • escape is  : C-a
  • local echo is  : no
  • noinit is  : no
  • noreset is  : no
  • nolock is  : no
  • send_cmd is  : sz -vv
  • receive_cmd is : rz -vv
  • imap is  :
  • omap is  :
  • emap is  : crcrlf,delbs,
  • Terminal ready
  • [ 0.000192] NOTICE: BL2: R-Car Gen3 Initial Program Loader(CA57) Rev.1.0.16
  • [ 0.005757] NOTICE: BL2: PRR is R-Car M3 Ver1.0
  • [ 0.010339] NOTICE: BL2: Board is Starter Kit Rev1.0
  • [ 0.015366] NOTICE: BL2: Boot device is HyperFlash(80MHz)
  • [ 0.020792] NOTICE: BL2: LCM state is CM
  • [ 0.024832] NOTICE: BL2: AVS setting succeeded. DVFS_SetVID=0x53
  • [ 0.030814] NOTICE: BL2: DDR3200(rev.0.27)NOTICE: [COLD_BOOT]NOTICE: ..0
  • [ 0.054038] NOTICE: BL2: DRAM Split is 2ch
  • [ 0.057923] NOTICE: BL2: QoS is default setting(rev.0.19)
  • [ 0.063421] NOTICE: BL2: Lossy Decomp areas
  • [ 0.067600] NOTICE: Entry 0: DCMPAREACRAx:0x80000540 DCMPAREACRBx:0x570
  • [ 0.074685] NOTICE: Entry 1: DCMPAREACRAx:0x40000000 DCMPAREACRBx:0x0
  • [ 0.081597] NOTICE: Entry 2: DCMPAREACRAx:0x20000000 DCMPAREACRBx:0x0
  • [ 0.088512] NOTICE: BL2: v1.3(release):b330e0e
  • [ 0.093001] NOTICE: BL2: Built : 16:52:57, Feb 13 2018
  • [ 0.098189] NOTICE: BL2: Normal boot
  • [ 0.101830] NOTICE: BL2: dst=0xe631f208 src=0x8180000 len=512(0x200)
  • [ 0.108379] NOTICE: BL2: dst=0x43f00000 src=0x8180400 len=6144(0x1800)
  • [ 0.114838] NOTICE: BL2: dst=0x44000000 src=0x81c0000 len=65536(0x10000)
  • [ 0.122063] NOTICE: BL2: dst=0x44100000 src=0x8200000 len=524288(0x80000)
  • [ 0.132542] NOTICE: BL2: dst=0x50000000 src=0x8640000 len=1048576(0x100000)
  • U-Boot 2015.04 (Feb 13 2018 - 17:53:05)
  • CPU: Renesas Electronics R8A7796 rev 1.0
  • Board: M3ULCB
  • I2C: ready
  • DRAM: 1.9 GiB
  • Flash: 64 MiB
  • MMC: sh-sdhi: 0, sh-sdhi: 1
  • MMC init failed
  • Using default environment
  • In: serial
  • Out: serial
  • Err: serial
  • Net: Board Net Initialization Failed
  • No ethernet found.
  • Hit any key to stop autoboot: 0
  • => mmc dev 0
  • switch to partitions #0, OK
  • mmc0 is current device
  • => mmc info
  • Device: sh-sdhi
  • Manufacturer ID: 9f
  • OEM: 5449
  • Name: SD128
  • Tran Speed: 50000000
  • Rd Block Len: 512
  • SD version 3.0
  • High Capacity: Yes
  • Capacity: 116.2 GiB
  • Bus Width: 4-bit
  • Erase Group Size: 512 Bytes
  • => ext2ls mmc 0:1 /boot
  • <DIR> 4096 .
  • <DIR> 4096 ..
  • <SYM> 28 Image
  • 18522624 Image-4.14.35-yocto-standard
  • 67069 Image-r8a7796-m3ulcb.dtb
  • =>setenv bootargs 'rw root=/dev/mmcblk0p1 rootfstype=ext3 rootwait'
  • => ext2load mmc 0:1 0x48080000 /boot/Image
  • 18522624 bytes read in 788 ms (22.4 MiB/s)
  • => ext2load mmc 0:1 0x48000000 /boot/Image-r8a7796-m3ulcb.dtb
  • 67069 bytes read in 17 ms (3.8 MiB/s)
  • => booti 0x48080000 – 0x48000000
  • # Flattened Device Tree blob at 48000000
  • Booting using the fdt blob at 0x48000000
  • Using Device Tree in place at 0000000048000000, end 00000000480135fc
  • Starting kernel ...
  • [ 0.000000] Booting Linux on physical CPU 0x0
  • [ 0.000000] Linux version 4.14.35-yocto-standard (oe-user@oe-host) (gcc version 7.3.0 (GCC)) #1 SMP PREEMPT Sun Feb 17 20:28:45 CST 2019
  • [ 0.000000] Boot CPU: AArch64 Processor [411fd073]
  • [ 0.000000] Machine model: Renesas M3ULCB board based on r8a7796
  • [ 0.000000] efi: Getting EFI parameters from FDT:
  • [ 0.000000] efi: UEFI not found.
  • [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000057000000, size 400 MiB
  • [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
  • [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000070000000, size 256 MiB
  • [ 0.000000] OF: reserved mem: initialized node linux,multimedia, compatible id shared-dma-pool
  • [ 0.000000] NUMA: No NUMA configuration found
  • [ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x000000063fffffff]
  • [ 0.000000] NUMA: NODE_DATA [mem 0x63ff96600-0x63ff980ff]
  • [ 0.000000] Zone ranges:
  • [ 0.000000] DMA [mem 0x0000000048000000-0x00000000ffffffff]
  • [ 0.000000] Normal [mem 0x0000000100000000-0x000000063fffffff]
  • [ 0.000000] Movable zone start for each node
  • [ 0.000000] Early memory node ranges
  • [ 0.000000] node 0: [mem 0x0000000048000000-0x0000000053ffffff]
  • [ 0.000000] node 0: [mem 0x0000000057000000-0x000000007fffffff]
  • [ 0.000000] node 0: [mem 0x0000000600000000-0x000000063fffffff]
  • [ 0.000000] Initmem setup node 0 [mem 0x0000000048000000-0x000000063fffffff]
  • [ 0.000000] psci: probing for conduit method from DT.
  • [ 0.000000] psci: PSCIv1.0 detected in firmware.
  • [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  • [ 0.000000] psci: Trusted OS resident on physical CPU 0x0
  • [ 0.000000] psci: SMC Calling Convention v1.0
  • [ 0.000000] percpu: Embedded 23 pages/cpu @ffff8005fff07000 s55448 r8192 d30568 u94208
  • [ 0.000000] Detected PIPT I-cache on CPU0
  • [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 471744
  • [ 0.000000] Policy zone: Normal
  • [ 0.000000] Kernel command line: rw root=/dev/mmcblk0p1 rootfstype=ext3 rootwait
  • [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
  • [ 0.000000] software IO TLB [mem 0x4ffff000-0x53fff000] (64MB) mapped at [ffff80000ffff000-ffff800013ffefff]
  • [ 0.000000] Memory: 1126832K/1916928K available (10684K kernel code, 1192K rwdata, 4992K rodata, 1152K init, 412K bss, 118352K reserved, 671744K cma-reserved)
  • [ 0.000000] Virtual kernel memory layout:
  • [ 0.000000] modules : 0xffff000000000000 - 0xffff000008000000 ( 128 MB)
  • [ 0.000000] vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000 (129022 GB)
  • [ 0.000000] .text : 0xffff000008080000 - 0xffff000008af0000 ( 10688 KB)
  • [ 0.000000] .rodata : 0xffff000008af0000 - 0xffff000008fe0000 ( 5056 KB)
  • [ 0.000000] .init : 0xffff000008fe0000 - 0xffff000009100000 ( 1152 KB)
  • [ 0.000000] .data : 0xffff000009100000 - 0xffff00000922a200 ( 1193 KB)
  • [ 0.000000] .bss : 0xffff00000922a200 - 0xffff0000092914e0 ( 413 KB)
  • [ 0.000000] fixed  : 0xffff7dfffe7f9000 - 0xffff7dfffec00000 ( 4124 KB)
  • [ 0.000000] PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000 ( 16 MB)
  • [ 0.000000] vmemmap : 0xffff7e0000000000 - 0xffff800000000000 ( 2048 GB maximum)
  • [ 0.000000] 0xffff7e0000200000 - 0xffff7e0018000000 ( 382 MB actual)
  • [ 0.000000] memory  : 0xffff800008000000 - 0xffff800600000000 ( 24448 MB)
  • [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
  • [ 0.000000] Preemptible hierarchical RCU implementation.
  • [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6.
  • [ 0.000000] Tasks RCU enabled.
  • [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
  • [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  • [ 0.000000] GIC: Adjusting CPU interface base to 0x00000000f102f000
  • [ 0.000000] GIC: Using split EOI/Deactivate mode
  • [ 0.000000] arch_timer: cp15 timer(s) running at 8.33MHz (phys).
  • [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x1ec02923e, max_idle_ns: 440795202125 ns
  • [ 0.000003] sched_clock: 56 bits at 8MHz, resolution 120ns, wraps every 2199023255496ns
  • [ 0.000377] Console: colour dummy device 80x25
  • [ 0.000597] console [tty0] enabled
  • [ 0.000640] Calibrating delay loop (skipped), value calculated using timer frequency.. 16.66 BogoMIPS (lpj=33333)
  • [ 0.000654] pid_max: default: 32768 minimum: 301
  • [ 0.000698] Security Framework initialized
  • [ 0.001481] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
  • [ 0.001877] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
  • [ 0.001916] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
  • [ 0.001937] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
  • [ 0.015941] ASID allocator initialised with 32768 entries
  • [ 0.023932] Hierarchical SRCU implementation.
  • [ 0.032449] Detected Renesas R-Car Gen3 r8a7796 ES1.0
  • [ 0.033510] EFI services will not be available.
  • [ 0.039963] smp: Bringing up secondary CPUs ...
  • [ 0.068124] Detected PIPT I-cache on CPU1
  • [ 0.068162] CPU1: Booted secondary processor [411fd073]
  • [ 0.096046] psci: failed to boot CPU2 (-22)
  • [ 0.096064] CPU2: failed to boot: -22
  • [ 0.096069] CPU2: failed in unknown state : 0x0
  • [ 0.124078] psci: failed to boot CPU3 (-22)
  • [ 0.124088] CPU3: failed to boot: -22
  • [ 0.124093] CPU3: failed in unknown state : 0x0
  • [ 0.152107] psci: failed to boot CPU4 (-22)
  • [ 0.152115] CPU4: failed to boot: -22
  • [ 0.152121] CPU4: failed in unknown state : 0x0
  • [ 0.180138] psci: failed to boot CPU5 (-22)
  • [ 0.180147] CPU5: failed to boot: -22
  • [ 0.180151] CPU5: failed in unknown state : 0x0
  • [ 0.180185] smp: Brought up 1 node, 2 CPUs
  • [ 0.180192] SMP: Total of 2 processors activated.
  • [ 0.180201] CPU features: detected feature: 32-bit EL0 Support
  • [ 0.180207] CPU features: detected feature: Kernel page table isolation (KPTI)
  • [ 0.184451] CPU: All CPU(s) started at EL2
  • [ 0.184469] alternatives: patching kernel code
  • [ 0.185048] devtmpfs: initialized
  • [ 0.189459] random: get_random_u32 called from bucket_table_alloc+0x108/0x260 with crng_init=0
  • [ 0.189865] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  • [ 0.189927] futex hash table entries: 2048 (order: 6, 262144 bytes)
  • [ 0.197921] pinctrl core: initialized pinctrl subsystem
  • [ 0.198473] random: fast init done
  • [ 0.199513] DMI not present or invalid.
  • [ 0.199766] NET: Registered protocol family 16
  • [ 0.201419] cpuidle: using governor menu
  • [ 0.202367] vdso: 2 pages (1 code @ ffff000008af6000, 1 data @ ffff000009105000)
  • [ 0.202391] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  • [ 0.202933] DMA: preallocated 256 KiB pool for atomic allocations
  • [ 0.203175] Serial: AMBA PL011 UART driver
  • [ 0.206296] sh-pfc e6060000.pin-controller: r8a77960_pfc support registered
  • [ 0.233149] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
  • [ 0.236916] ACPI: Interpreter disabled.
  • [ 0.238893] rcar-avs: use avs value: 0
  • [ 0.238998] rcar-avs: /cpus/cpu@0 is running with: /opp_table0
  • [ 0.239008] rcar-avs: /cpus/cpu@1 is running with: /opp_table0
  • [ 0.239028] rcar-avs: /soc/gsx@fd000000 is running with: /gsx_opp_table0
  • [ 0.240310] vgaarb: loaded
  • [ 0.240607] SCSI subsystem initialized
  • [ 0.248797] usbcore: registered new interface driver usbfs
  • [ 0.248838] usbcore: registered new interface driver hub
  • [ 0.248894] usbcore: registered new device driver usb
  • [ 0.249888] i2c-sh_mobile e60b0000.i2c: I2C adapter 7, bus speed 400000 Hz
  • [ 0.250208] media: Linux media interface: v0.10
  • [ 0.250241] Linux video capture interface: v2.00
  • [ 0.250310] pps_core: LinuxPPS API ver. 1 registered
  • [ 0.250318] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  • [ 0.250333] PTP clock support registered
  • [ 0.250480] EDAC MC: Ver: 3.0.0
  • [ 0.250769] dmi: Firmware registration failed.
  • [ 0.251432] Advanced Linux Sound Architecture Driver Initialized.
  • [ 0.252697] clocksource: Switched to clocksource arch_sys_counter
  • [ 0.252823] VFS: Disk quotas dquot_6.6.0
  • [ 0.252865] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  • [ 0.252979] pnp: PnP ACPI: disabled
  • [ 0.256930] NET: Registered protocol family 2
  • [ 0.257314] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  • [ 0.257391] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
  • [ 0.257534] TCP: Hash tables configured (established 16384 bind 16384)
  • [ 0.257659] UDP hash table entries: 1024 (order: 3, 32768 bytes)
  • [ 0.257685] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
  • [ 0.257810] NET: Registered protocol family 1
  • [ 0.258083] RPC: Registered named UNIX socket transport module.
  • [ 0.258095] RPC: Registered udp transport module.
  • [ 0.258101] RPC: Registered tcp transport module.
  • [ 0.258107] RPC: Registered tcp NFSv4.1 backchannel transport module.
  • [ 0.258684] hw perfevents: enabled with armv8_cortex_a57 PMU driver, 7 counters available
  • [ 0.258826] hw perfevents: /soc/pmu_a53: failed to probe PMU!
  • [ 0.258836] hw perfevents: /soc/pmu_a53: failed to register PMU devices!
  • [ 0.259058] kvm [1]: 8-bit VMID
  • [ 0.259806] kvm [1]: vgic interrupt IRQ1
  • [ 0.259855] kvm [1]: Hyp mode initialized successfully
  • [ 0.261754] audit: initializing netlink subsys (disabled)
  • [ 0.261905] audit: type=2000 audit(0.259:1): state=initialized audit_enabled=0 res=1
  • [ 0.262166] workingset: timestamp_bits=44 max_order=19 bucket_order=0
  • [ 0.265470] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  • [ 0.269930] NFS: Registering the id_resolver key type
  • [ 0.269955] Key type id_resolver registered
  • [ 0.269962] Key type id_legacy registered
  • [ 0.269972] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  • [ 0.270100] 9p: Installing v9fs 9p2000 file system support
  • [ 0.271518] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
  • [ 0.271536] io scheduler noop registered
  • [ 0.271642] io scheduler cfq registered (default)
  • [ 0.271650] io scheduler mq-deadline registered
  • [ 0.271657] io scheduler kyber registered
  • [ 0.276897] gpio_rcar e6050000.gpio: driving 16 GPIOs
  • [ 0.277365] gpio_rcar e6051000.gpio: driving 29 GPIOs
  • [ 0.277657] gpio_rcar e6052000.gpio: driving 15 GPIOs
  • [ 0.277858] gpio_rcar e6053000.gpio: driving 16 GPIOs
  • [ 0.278049] gpio_rcar e6054000.gpio: driving 18 GPIOs
  • [ 0.278224] gpio_rcar e6055000.gpio: driving 26 GPIOs
  • [ 0.278412] gpio_rcar e6055400.gpio: driving 32 GPIOs
  • [ 0.278586] gpio_rcar e6055800.gpio: driving 4 GPIOs
  • [ 0.302502] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  • [ 0.304136] SuperH (H)SCI(F) driver initialized
  • [ 0.304632] e6e88000.serial: ttySC0 at MMIO 0xe6e88000 (irq = 55, base_baud = 0) is a scif
  • [ 1.285638] console [ttySC0] enabled
  • [ 1.289990] msm_serial: driver initialized
  • [ 1.295005] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  • [ 1.301639] [drm] No driver support for vblank timestamp query.
  • [ 1.308123] rcar-dw-hdmi fead0000.hdmi: Detected HDMI TX controller v2.01a with HDCP (DWC HDMI 2.0 TX PHY)
  • [ 1.317984] rcar-dw-hdmi fead0000.hdmi: registered DesignWare HDMI I2C bus driver
  • [ 1.331090] loop: module loaded
  • [ 1.337698] libphy: Fixed MDIO Bus: probed
  • [ 1.342126] tun: Universal TUN/TAP device driver, 1.6
  • [ 1.348214] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
  • [ 1.354116] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
  • [ 1.360078] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
  • [ 1.367071] igb: Copyright (c) 2007-2014 Intel Corporation.
  • [ 1.372677] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
  • [ 1.380523] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
  • [ 1.386788] sky2: driver version 1.30
  • [ 1.391263] ravb e6800000.ethernet: no valid MAC address supplied, using a random one
  • [ 1.399176] libphy: ravb_mii: probed
  • [ 1.403772] ravb e6800000.ethernet eth0: Base address at 0xe6800000, 2e:e9:5b:f1:f9:c2, IRQ 52.
  • [ 1.413081] VFIO - User Level meta-driver version: 0.3
  • [ 1.419338] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  • [ 1.425969] ehci-pci: EHCI PCI platform driver
  • [ 1.430448] ehci-platform: EHCI generic platform driver
  • [ 1.436033] ehci-platform ee0a0100.usb: EHCI Host Controller
  • [ 1.441728] ehci-platform ee0a0100.usb: new USB bus registered, assigned bus number 1
  • [ 1.449710] ehci-platform ee0a0100.usb: irq 143, io mem 0xee0a0100
  • [ 1.468705] ehci-platform ee0a0100.usb: USB 2.0 started, EHCI 1.10
  • [ 1.475270] hub 1-0:1.0: USB hub found
  • [ 1.479045] hub 1-0:1.0: 1 port detected
  • [ 1.483248] ehci-orion: EHCI orion driver
  • [ 1.487438] ehci-exynos: EHCI EXYNOS driver
  • [ 1.491713] ehci-msm: Qualcomm On-Chip EHCI Host Controller
  • [ 1.497356] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  • [ 1.503550] ohci-pci: OHCI PCI platform driver
  • [ 1.508042] ohci-platform: OHCI generic platform driver
  • [ 1.513498] ohci-platform ee0a0000.usb: Generic Platform OHCI controller
  • [ 1.520220] ohci-platform ee0a0000.usb: new USB bus registered, assigned bus number 2
  • [ 1.528175] ohci-platform ee0a0000.usb: irq 143, io mem 0xee0a0000
  • [ 1.623005] hub 2-0:1.0: USB hub found
  • [ 1.626776] hub 2-0:1.0: 1 port detected
  • [ 1.630941] ohci-exynos: OHCI EXYNOS driver
  • [ 1.635657] usbcore: registered new interface driver usb-storage
  • [ 1.644113] i2c /dev entries driver
  • [ 1.655063] cs2000-cp 2-004f: revision - C1
  • [ 1.659323] i2c-rcar e6510000.i2c: probed
  • [ 1.668099] i2c-rcar e66d8000.i2c: probed
  • [ 1.677148] rcar_gen3_thermal e6198000.thermal: is using pseudo fixed FUSE values
  • [ 1.689188] rcar_gen3_thermal e6198000.thermal: TSC0: Loaded 1 trip points
  • [ 1.700597] rcar_gen3_thermal e6198000.thermal: TSC1: Loaded 1 trip points
  • [ 1.711730] rcar_gen3_thermal e6198000.thermal: TSC2: Loaded 3 trip points
  • [ 1.721141] sdhci: Secure Digital Host Controller Interface driver
  • [ 1.727341] sdhci: Copyright(c) Pierre Ossman
  • [ 1.732295] renesas_sdhi_internal_dmac ee100000.sd: Got CD GPIO
  • [ 1.800811] renesas_sdhi_internal_dmac ee140000.sd: mmc0 base at 0xee140000 max clock rate 200 MHz
  • [ 1.809997] Synopsys Designware Multimedia Card Interface Driver
  • [ 1.817651] sdhci-pltfm: SDHCI platform and OF driver helper
  • [ 1.824621] ledtrig-cpu: registered to indicate activity on CPUs
  • [ 1.831559] usbcore: registered new interface driver usbhid
  • [ 1.837152] usbhid: USB HID core driver
  • [ 1.841938] optee: probing for conduit method from DT.
  • [ 1.847355] R-Car Rev.1.0.8
  • [ 1.850172] optee: initialized driver
  • [ 1.862885] rcar_sound ec500000.sound: probed
  • [ 1.867566] NET: Registered protocol family 17
  • [ 1.872076] 9pnet: Installing 9P2000 support
  • [ 1.876396] Key type dns_resolver registered
  • [ 1.881045] registered taskstats version 1
  • [ 1.889036] thermal emergency: set temperature to 110 celsius
  • [ 1.894847] thermal emergency: shutdown target cpus 1
  • [ 1.899900] thermal emergency: freq scaled target cpus 0
  • [ 1.905502] renesas_irqc e61c0000.interrupt-controller: driving 6 irqs
  • [ 1.913554] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  • [ 1.920189] [drm] No driver support for vblank timestamp query.
  • [ 1.926748] [drm] Cannot find any crtc or sizes
  • [ 1.931717] [drm] Initialized rcar-du 1.0.0 20130110 for feb00000.display on minor 0
  • [ 1.939481] [drm] Device feb00000.display probed
  • [ 1.944493] [drm] Cannot find any crtc or sizes
  • [ 1.949623] bd9571mwv 7-0030: Device: BD9571MWV rev. 1
  • [ 1.960024] renesas_sdhi_internal_dmac ee100000.sd: Got CD GPIO
  • [ 2.024895] renesas_sdhi_internal_dmac ee100000.sd: mmc1 base at 0xee100000 max clock rate 200 MHz
  • [ 2.035303] asoc-simple-card sound: ak4613-hifi <-> ec500000.sound mapping ok
  • [ 2.042472] asoc-simple-card sound: ASoC: no DMI vendor name!
  • [ 2.050563] input: keyboard as /devices/platform/keyboard/input/input0
  • [ 2.057349] hctosys: unable to open rtc device (rtc0)
  • [ 2.062820] ALSA device list:
  • [ 2.065832] #0: rsnd-dai.0-ak4613-hifi
  • [ 2.070064] Waiting for root device /dev/mmcblk0p1...
  • [ 6.876702] renesas_sdhi_internal_dmac ee140000.sd: timeout waiting for hardware interrupt (CMD8)
  • [ 6.885689] mmc1: new SDXC card at address 0007
  • [ 6.890449] mmcblk1: mmc1:0007 SD128 116 GiB
  • [ 6.907655] mmc0: error -110 whilst initialising MMC card
  • [ 6.981803] mmcblk1: p1
  • [ 12.252706] renesas_sdhi_internal_dmac ee140000.sd: timeout waiting for hardware interrupt (CMD8)
  • [ 12.283646] mmc0: error -110 whilst initialising MMC card
  • [ 17.628700] renesas_sdhi_internal_dmac ee140000.sd: timeout waiting for hardware interrupt (CMD8)
  • [ 17.659629] mmc0: error -110 whilst initialising MMC card
  • [ 23.004700] renesas_sdhi_internal_dmac ee140000.sd: timeout waiting for hardware interrupt (CMD8)
  • [ 23.035629] mmc0: error -110 whilst initialising MMC card


Using mmcblk1p1

  • => setenv bootargs 'rw root=/dev/mmcblk1p1 rootfstype=ext4 rootwait'
  • => ext2load mmc 0:1 0x48080000 /boot/Image
  • 18522624 bytes read in 789 ms (22.4 MiB/s)
  • => ext2load mmc 0:1 0x48000000 /boot/Image-r8a7796-m3ulcb.dtb
  • 67069 bytes read in 17 ms (3.8 MiB/s)
  • => booti 0x48080000 - 0x48000000
  • ## Flattened Device Tree blob at 48000000
  • Booting using the fdt blob at 0x48000000
  • Using Device Tree in place at 0000000048000000, end 00000000480135fc
  • Starting kernel ...
  • [ 0.000000] Booting Linux on physical CPU 0x0
  • [ 0.000000] Linux version 4.14.35-yocto-standard (oe-user@oe-host) (gcc version 7.3.0 (GCC)) #1 SMP PREEMPT Sun Feb 17 20:28:45 CST 2019
  • [ 0.000000] Boot CPU: AArch64 Processor [411fd073]
  • [ 0.000000] Machine model: Renesas M3ULCB board based on r8a7796
  • [ 0.000000] efi: Getting EFI parameters from FDT:
  • [ 0.000000] efi: UEFI not found.
  • [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000057000000, size 400 MiB
  • [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
  • [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000070000000, size 256 MiB
  • [ 0.000000] OF: reserved mem: initialized node linux,multimedia, compatible id shared-dma-pool
  • [ 0.000000] NUMA: No NUMA configuration found
  • [ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x000000063fffffff]
  • [ 0.000000] NUMA: NODE_DATA [mem 0x63ff96600-0x63ff980ff]
  • [ 0.000000] Zone ranges:
  • [ 0.000000] DMA [mem 0x0000000048000000-0x00000000ffffffff]
  • [ 0.000000] Normal [mem 0x0000000100000000-0x000000063fffffff]
  • [ 0.000000] Movable zone start for each node
  • [ 0.000000] Early memory node ranges
  • [ 0.000000] node 0: [mem 0x0000000048000000-0x0000000053ffffff]
  • [ 0.000000] node 0: [mem 0x0000000057000000-0x000000007fffffff]
  • [ 0.000000] node 0: [mem 0x0000000600000000-0x000000063fffffff]
  • [ 0.000000] Initmem setup node 0 [mem 0x0000000048000000-0x000000063fffffff]
  • [ 0.000000] psci: probing for conduit method from DT.
  • [ 0.000000] psci: PSCIv1.0 detected in firmware.
  • [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  • [ 0.000000] psci: Trusted OS resident on physical CPU 0x0
  • [ 0.000000] psci: SMC Calling Convention v1.0
  • [ 0.000000] percpu: Embedded 23 pages/cpu @ffff8005fff07000 s55448 r8192 d30568 u94208
  • [ 0.000000] Detected PIPT I-cache on CPU0
  • [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 471744
  • [ 0.000000] Policy zone: Normal
  • [ 0.000000] Kernel command line: rw root=/dev/mmcblk1p1 rootfstype=ext4 rootwait
  • [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
  • [ 0.000000] software IO TLB [mem 0x4ffff000-0x53fff000] (64MB) mapped at [ffff80000ffff000-ffff800013ffefff]
  • [ 0.000000] Memory: 1126832K/1916928K available (10684K kernel code, 1192K rwdata, 4992K rodata, 1152K init, 412K bss, 118352K reserved, 671744K cma-reserved)
  • [ 0.000000] Virtual kernel memory layout:
  • [ 0.000000] modules : 0xffff000000000000 - 0xffff000008000000 ( 128 MB)
  • [ 0.000000] vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000 (129022 GB)
  • [ 0.000000] .text : 0xffff000008080000 - 0xffff000008af0000 ( 10688 KB)
  • [ 0.000000] .rodata : 0xffff000008af0000 - 0xffff000008fe0000 ( 5056 KB)
  • [ 0.000000] .init : 0xffff000008fe0000 - 0xffff000009100000 ( 1152 KB)
  • [ 0.000000] .data : 0xffff000009100000 - 0xffff00000922a200 ( 1193 KB)
  • [ 0.000000] .bss : 0xffff00000922a200 - 0xffff0000092914e0 ( 413 KB)
  • [ 0.000000] fixed  : 0xffff7dfffe7f9000 - 0xffff7dfffec00000 ( 4124 KB)
  • [ 0.000000] PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000 ( 16 MB)
  • [ 0.000000] vmemmap : 0xffff7e0000000000 - 0xffff800000000000 ( 2048 GB maximum)
  • [ 0.000000] 0xffff7e0000200000 - 0xffff7e0018000000 ( 382 MB actual)
  • [ 0.000000] memory  : 0xffff800008000000 - 0xffff800600000000 ( 24448 MB)
  • [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
  • [ 0.000000] Preemptible hierarchical RCU implementation.
  • [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6.
  • [ 0.000000] Tasks RCU enabled.
  • [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
  • [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  • [ 0.000000] GIC: Adjusting CPU interface base to 0x00000000f102f000
  • [ 0.000000] GIC: Using split EOI/Deactivate mode
  • [ 0.000000] arch_timer: cp15 timer(s) running at 8.33MHz (phys).
  • [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x1ec02923e, max_idle_ns: 440795202125 ns
  • [ 0.000003] sched_clock: 56 bits at 8MHz, resolution 120ns, wraps every 2199023255496ns
  • [ 0.000380] Console: colour dummy device 80x25
  • [ 0.000600] console [tty0] enabled
  • [ 0.000642] Calibrating delay loop (skipped), value calculated using timer frequency.. 16.66 BogoMIPS (lpj=33333)
  • [ 0.000656] pid_max: default: 32768 minimum: 301
  • [ 0.000700] Security Framework initialized
  • [ 0.001480] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
  • [ 0.001876] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
  • [ 0.001914] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
  • [ 0.001935] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
  • [ 0.015945] ASID allocator initialised with 32768 entries
  • [ 0.023935] Hierarchical SRCU implementation.
  • [ 0.032480] Detected Renesas R-Car Gen3 r8a7796 ES1.0
  • [ 0.033532] EFI services will not be available.
  • [ 0.039968] smp: Bringing up secondary CPUs ...
  • [ 0.068125] Detected PIPT I-cache on CPU1
  • [ 0.068164] CPU1: Booted secondary processor [411fd073]
  • [ 0.096047] psci: failed to boot CPU2 (-22)
  • [ 0.096064] CPU2: failed to boot: -22
  • [ 0.096069] CPU2: failed in unknown state : 0x0
  • [ 0.124081] psci: failed to boot CPU3 (-22)
  • [ 0.124090] CPU3: failed to boot: -22
  • [ 0.124096] CPU3: failed in unknown state : 0x0
  • [ 0.152112] psci: failed to boot CPU4 (-22)
  • [ 0.152120] CPU4: failed to boot: -22
  • [ 0.152125] CPU4: failed in unknown state : 0x0
  • [ 0.180144] psci: failed to boot CPU5 (-22)
  • [ 0.180153] CPU5: failed to boot: -22
  • [ 0.180157] CPU5: failed in unknown state : 0x0
  • [ 0.180193] smp: Brought up 1 node, 2 CPUs
  • [ 0.180198] SMP: Total of 2 processors activated.
  • [ 0.180206] CPU features: detected feature: 32-bit EL0 Support
  • [ 0.180213] CPU features: detected feature: Kernel page table isolation (KPTI)
  • [ 0.184451] CPU: All CPU(s) started at EL2
  • [ 0.184466] alternatives: patching kernel code
  • [ 0.185042] devtmpfs: initialized
  • [ 0.189461] random: get_random_u32 called from bucket_table_alloc+0x108/0x260 with crng_init=0
  • [ 0.189864] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  • [ 0.189928] futex hash table entries: 2048 (order: 6, 262144 bytes)
  • [ 0.197962] pinctrl core: initialized pinctrl subsystem
  • [ 0.198509] random: fast init done
  • [ 0.199566] DMI not present or invalid.
  • [ 0.199819] NET: Registered protocol family 16
  • [ 0.201467] cpuidle: using governor menu
  • [ 0.202418] vdso: 2 pages (1 code @ ffff000008af6000, 1 data @ ffff000009105000)
  • [ 0.202440] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  • [ 0.202982] DMA: preallocated 256 KiB pool for atomic allocations
  • [ 0.203219] Serial: AMBA PL011 UART driver
  • [ 0.206350] sh-pfc e6060000.pin-controller: r8a77960_pfc support registered
  • [ 0.229018] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
  • [ 0.229926] ACPI: Interpreter disabled.
  • [ 0.231959] rcar-avs: use avs value: 0
  • [ 0.232054] rcar-avs: /cpus/cpu@0 is running with: /opp_table0
  • [ 0.232065] rcar-avs: /cpus/cpu@1 is running with: /opp_table0
  • [ 0.232085] rcar-avs: /soc/gsx@fd000000 is running with: /gsx_opp_table0
  • [ 0.233468] vgaarb: loaded
  • [ 0.233715] SCSI subsystem initialized
  • [ 0.234260] usbcore: registered new interface driver usbfs
  • [ 0.234299] usbcore: registered new interface driver hub
  • [ 0.234373] usbcore: registered new device driver usb
  • [ 0.235314] i2c-sh_mobile e60b0000.i2c: I2C adapter 7, bus speed 400000 Hz
  • [ 0.235628] media: Linux media interface: v0.10
  • [ 0.235654] Linux video capture interface: v2.00
  • [ 0.235722] pps_core: LinuxPPS API ver. 1 registered
  • [ 0.235730] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  • [ 0.235747] PTP clock support registered
  • [ 0.235889] EDAC MC: Ver: 3.0.0
  • [ 0.236220] dmi: Firmware registration failed.
  • [ 0.236986] Advanced Linux Sound Architecture Driver Initialized.
  • [ 0.237455] clocksource: Switched to clocksource arch_sys_counter
  • [ 0.237587] VFS: Disk quotas dquot_6.6.0
  • [ 0.237629] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  • [ 0.237738] pnp: PnP ACPI: disabled
  • [ 0.242971] NET: Registered protocol family 2
  • [ 0.243347] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  • [ 0.243437] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
  • [ 0.243576] TCP: Hash tables configured (established 16384 bind 16384)
  • [ 0.243694] UDP hash table entries: 1024 (order: 3, 32768 bytes)
  • [ 0.243725] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
  • [ 0.243844] NET: Registered protocol family 1
  • [ 0.244304] RPC: Registered named UNIX socket transport module.
  • [ 0.244317] RPC: Registered udp transport module.
  • [ 0.244323] RPC: Registered tcp transport module.
  • [ 0.244329] RPC: Registered tcp NFSv4.1 backchannel transport module.
  • [ 0.244920] hw perfevents: enabled with armv8_cortex_a57 PMU driver, 7 counters available
  • [ 0.245056] hw perfevents: /soc/pmu_a53: failed to probe PMU!
  • [ 0.245064] hw perfevents: /soc/pmu_a53: failed to register PMU devices!
  • [ 0.245293] kvm [1]: 8-bit VMID
  • [ 0.246688] kvm [1]: vgic interrupt IRQ1
  • [ 0.246751] kvm [1]: Hyp mode initialized successfully
  • [ 0.248633] audit: initializing netlink subsys (disabled)
  • [ 0.249003] audit: type=2000 audit(0.243:1): state=initialized audit_enabled=0 res=1
  • [ 0.249057] workingset: timestamp_bits=44 max_order=19 bucket_order=0
  • [ 0.252384] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  • [ 0.257008] NFS: Registering the id_resolver key type
  • [ 0.257039] Key type id_resolver registered
  • [ 0.257046] Key type id_legacy registered
  • [ 0.257057] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  • [ 0.257184] 9p: Installing v9fs 9p2000 file system support
  • [ 0.258547] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
  • [ 0.258564] io scheduler noop registered
  • [ 0.258670] io scheduler cfq registered (default)
  • [ 0.258678] io scheduler mq-deadline registered
  • [ 0.258684] io scheduler kyber registered
  • [ 0.263747] gpio_rcar e6050000.gpio: driving 16 GPIOs
  • [ 0.264010] gpio_rcar e6051000.gpio: driving 29 GPIOs
  • [ 0.264203] gpio_rcar e6052000.gpio: driving 15 GPIOs
  • [ 0.264386] gpio_rcar e6053000.gpio: driving 16 GPIOs
  • [ 0.264558] gpio_rcar e6054000.gpio: driving 18 GPIOs
  • [ 0.264735] gpio_rcar e6055000.gpio: driving 26 GPIOs
  • [ 0.264922] gpio_rcar e6055400.gpio: driving 32 GPIOs
  • [ 0.265085] gpio_rcar e6055800.gpio: driving 4 GPIOs
  • [ 0.285354] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  • [ 0.287462] SuperH (H)SCI(F) driver initialized
  • [ 0.287934] e6e88000.serial: ttySC0 at MMIO 0xe6e88000 (irq = 55, base_baud = 0) is a scif
  • [ 1.269016] console [ttySC0] enabled
  • [ 1.273320] msm_serial: driver initialized
  • [ 1.278552] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  • [ 1.285180] [drm] No driver support for vblank timestamp query.
  • [ 1.291672] rcar-dw-hdmi fead0000.hdmi: Detected HDMI TX controller v2.01a with HDCP (DWC HDMI 2.0 TX PHY)
  • [ 1.301546] rcar-dw-hdmi fead0000.hdmi: registered DesignWare HDMI I2C bus driver
  • [ 1.314683] loop: module loaded
  • [ 1.321356] libphy: Fixed MDIO Bus: probed
  • [ 1.325706] tun: Universal TUN/TAP device driver, 1.6
  • [ 1.331827] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
  • [ 1.337682] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
  • [ 1.343685] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
  • [ 1.350667] igb: Copyright (c) 2007-2014 Intel Corporation.
  • [ 1.356278] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
  • [ 1.364123] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
  • [ 1.370401] sky2: driver version 1.30
  • [ 1.374880] ravb e6800000.ethernet: no valid MAC address supplied, using a random one
  • [ 1.382797] libphy: ravb_mii: probed
  • [ 1.387398] ravb e6800000.ethernet eth0: Base address at 0xe6800000, a2:a5:8c:e7:ea:39, IRQ 52.
  • [ 1.396676] VFIO - User Level meta-driver version: 0.3
  • [ 1.402953] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  • [ 1.409552] ehci-pci: EHCI PCI platform driver
  • [ 1.414031] ehci-platform: EHCI generic platform driver
  • [ 1.419656] ehci-platform ee0a0100.usb: EHCI Host Controller
  • [ 1.425355] ehci-platform ee0a0100.usb: new USB bus registered, assigned bus number 1
  • [ 1.433343] ehci-platform ee0a0100.usb: irq 143, io mem 0xee0a0100
  • [ 1.453459] ehci-platform ee0a0100.usb: USB 2.0 started, EHCI 1.10
  • [ 1.460019] hub 1-0:1.0: USB hub found
  • [ 1.463792] hub 1-0:1.0: 1 port detected
  • [ 1.467990] ehci-orion: EHCI orion driver
  • [ 1.472184] ehci-exynos: EHCI EXYNOS driver
  • [ 1.476460] ehci-msm: Qualcomm On-Chip EHCI Host Controller
  • [ 1.482106] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  • [ 1.488302] ohci-pci: OHCI PCI platform driver
  • [ 1.492792] ohci-platform: OHCI generic platform driver
  • [ 1.498250] ohci-platform ee0a0000.usb: Generic Platform OHCI controller
  • [ 1.504969] ohci-platform ee0a0000.usb: new USB bus registered, assigned bus number 2
  • [ 1.512911] ohci-platform ee0a0000.usb: irq 143, io mem 0xee0a0000
  • [ 1.607796] hub 2-0:1.0: USB hub found
  • [ 1.611567] hub 2-0:1.0: 1 port detected
  • [ 1.615720] ohci-exynos: OHCI EXYNOS driver
  • [ 1.620449] usbcore: registered new interface driver usb-storage
  • [ 1.628893] i2c /dev entries driver
  • [ 1.639858] cs2000-cp 2-004f: revision - C1
  • [ 1.644119] i2c-rcar e6510000.i2c: probed
  • [ 1.652883] i2c-rcar e66d8000.i2c: probed
  • [ 1.661887] rcar_gen3_thermal e6198000.thermal: is using pseudo fixed FUSE values
  • [ 1.673891] rcar_gen3_thermal e6198000.thermal: TSC0: Loaded 1 trip points
  • [ 1.685305] rcar_gen3_thermal e6198000.thermal: TSC1: Loaded 1 trip points
  • [ 1.696430] rcar_gen3_thermal e6198000.thermal: TSC2: Loaded 3 trip points
  • [ 1.705917] sdhci: Secure Digital Host Controller Interface driver
  • [ 1.712118] sdhci: Copyright(c) Pierre Ossman
  • [ 1.717067] renesas_sdhi_internal_dmac ee100000.sd: Got CD GPIO
  • [ 1.785564] renesas_sdhi_internal_dmac ee140000.sd: mmc0 base at 0xee140000 max clock rate 200 MHz
  • [ 1.794747] Synopsys Designware Multimedia Card Interface Driver
  • [ 1.802388] sdhci-pltfm: SDHCI platform and OF driver helper
  • [ 1.809354] ledtrig-cpu: registered to indicate activity on CPUs
  • [ 1.816363] usbcore: registered new interface driver usbhid
  • [ 1.821955] usbhid: USB HID core driver
  • [ 1.826755] optee: probing for conduit method from DT.
  • [ 1.832200] R-Car Rev.1.0.8
  • [ 1.835161] optee: initialized driver
  • [ 1.847911] rcar_sound ec500000.sound: probed
  • [ 1.852597] NET: Registered protocol family 17
  • [ 1.857108] 9pnet: Installing 9P2000 support
  • [ 1.861429] Key type dns_resolver registered
  • [ 1.866105] registered taskstats version 1
  • [ 1.874164] thermal emergency: set temperature to 110 celsius
  • [ 1.879972] thermal emergency: shutdown target cpus 1
  • [ 1.885034] thermal emergency: freq scaled target cpus 0
  • [ 1.890642] renesas_irqc e61c0000.interrupt-controller: driving 6 irqs
  • [ 1.898657] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  • [ 1.905296] [drm] No driver support for vblank timestamp query.
  • [ 1.911865] [drm] Cannot find any crtc or sizes
  • [ 1.916834] [drm] Initialized rcar-du 1.0.0 20130110 for feb00000.display on minor 0
  • [ 1.924595] [drm] Device feb00000.display probed
  • [ 1.929614] [drm] Cannot find any crtc or sizes
  • [ 1.934749] bd9571mwv 7-0030: Device: BD9571MWV rev. 1
  • [ 1.945128] renesas_sdhi_internal_dmac ee100000.sd: Got CD GPIO
  • [ 2.009660] renesas_sdhi_internal_dmac ee100000.sd: mmc1 base at 0xee100000 max clock rate 200 MHz
  • [ 2.020021] asoc-simple-card sound: ak4613-hifi <-> ec500000.sound mapping ok
  • [ 2.027189] asoc-simple-card sound: ASoC: no DMI vendor name!
  • [ 2.035375] input: keyboard as /devices/platform/keyboard/input/input0
  • [ 2.042210] hctosys: unable to open rtc device (rtc0)
  • [ 2.047686] ALSA device list:
  • [ 2.050666] #0: rsnd-dai.0-ak4613-hifi
  • [ 2.054889] Waiting for root device /dev/mmcblk1p1...
  • [ 6.881468] renesas_sdhi_internal_dmac ee140000.sd: timeout waiting for hardware interrupt (CMD8)
  • [ 6.890455] mmc1: new SDXC card at address 0007
  • [ 6.895216] mmcblk1: mmc1:0007 SD128 116 GiB
  • [ 6.912424] mmc0: error -110 whilst initialising MMC card
  • [ 6.986573] mmcblk1: p1
  • [ 12.257461] renesas_sdhi_internal_dmac ee100000.sd: timeout waiting for hardware interrupt (CMD18)
  • [ 12.257464] renesas_sdhi_internal_dmac ee140000.sd: timeout waiting for hardware interrupt (CMD8)
  • [ 12.279527] mmc0: error -110 whilst initialising MMC card
  • [ 12.297994] mmcblk1: error -110 transferring data, sector 2048, nr 8, cmd response 0x900, card status 0x0
  • [ 17.633459] renesas_sdhi_internal_dmac ee100000.sd: timeout waiting for hardware interrupt (CMD18)
  • [ 17.633461] renesas_sdhi_internal_dmac ee140000.sd: timeout waiting for hardware interrupt (CMD8)
  • [ 17.655521] mmc0: error -110 whilst initialising MMC card
  • [ 17.673984] mmcblk1: error -110 transferring data, sector 2048, nr 8, cmd response 0x900, card status 0x0
  • [ 17.683557] mmcblk1: retrying using single block read
  • [ 17.693686] mmcblk1: error -84 transferring data, sector 2048, nr 8, cmd response 0x900, card status 0x0
  • [ 17.703172] print_req_error: I/O error, dev mmcblk1, sector 2048
  • [ 17.714257] mmcblk1: error -84 transferring data, sector 2049, nr 7, cmd response 0x900, card status 0x0
  • [ 17.723740] print_req_error: I/O error, dev mmcblk1, sector 2049
  • [ 17.734824] mmcblk1: error -84 transferring data, sector 2050, nr 6, cmd response 0x900, card status 0x0
  • [ 17.744307] print_req_error: I/O error, dev mmcblk1, sector 2050
  • [ 17.755388] mmcblk1: error -84 transferring data, sector 2051, nr 5, cmd response 0x900, card status 0x0
  • [ 17.764872] print_req_error: I/O error, dev mmcblk1, sector 2051
  • [ 17.775952] mmcblk1: error -84 transferring data, sector 2052, nr 4, cmd response 0x900, card status 0x0
  • [ 17.785435] print_req_error: I/O error, dev mmcblk1, sector 2052
  • [ 17.796517] mmcblk1: error -84 transferring data, sector 2053, nr 3, cmd response 0x900, card status 0x0
  • [ 17.806000] print_req_error: I/O error, dev mmcblk1, sector 2053
  • [ 17.817085] mmcblk1: error -84 transferring data, sector 2054, nr 2, cmd response 0x900, card status 0x0
  • [ 17.826569] print_req_error: I/O error, dev mmcblk1, sector 2054
  • [ 17.837653] mmcblk1: error -84 transferring data, sector 2055, nr 1, cmd response 0x900, card status 0x0
  • [ 17.847136] print_req_error: I/O error, dev mmcblk1, sector 2055
  • [ 17.853152] EXT4-fs (mmcblk1p1): Can't read superblock on 2nd try
  • [ 17.864473] mmcblk1: error -84 transferring data, sector 2050, nr 2, cmd response 0x900, card status 0x0
  • [ 17.873961] print_req_error: I/O error, dev mmcblk1, sector 2050
  • [ 17.885047] mmcblk1: error -84 transferring data, sector 2051, nr 1, cmd response 0x900, card status 0x0
  • [ 17.894532] print_req_error: I/O error, dev mmcblk1, sector 2051
  • [ 17.900547] EXT4-fs (mmcblk1p1): unable to read superblock
  • [ 17.906059] List of all partitions:
  • [ 17.909563] b300 121798656 mmcblk1
  • [ 17.909565] driver: mmcblk
  • [ 17.916365] b301 121797631 mmcblk1p1 00000000-01
  • [ 17.916367]
  • [ 17.923166] No filesystem could mount root, tried:
  • [ 17.923168] ext4
  • [ 17.928055]
  • [ 17.931469] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(179,1)
  • [ 17.939906] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.14.35-yocto-standard #1
  • [ 17.947212] Hardware name: Renesas M3ULCB board based on r8a7796 (DT)
  • [ 17.953648] Call trace:
  • [ 17.956101] [<ffff000008089a50>] dump_backtrace+0x0/0x3c8
  • [ 17.961497] [<ffff000008089e2c>] show_stack+0x14/0x20
  • [ 17.966550] [<ffff000008ac8640>] dump_stack+0x9c/0xbc
  • [ 17.971600] [<ffff0000080ce700>] panic+0x11c/0x28c
  • [ 17.976391] [<ffff000008fe11dc>] mount_block_root+0x214/0x264
  • [ 17.982132] [<ffff000008fe1348>] mount_root+0x11c/0x134
  • [ 17.987352] [<ffff000008fe1498>] prepare_namespace+0x138/0x180
  • [ 17.993181] [<ffff000008fe0d8c>] kernel_init_freeable+0x208/0x22c
  • [ 17.999271] [<ffff000008adaf38>] kernel_init+0x10/0x100
  • [ 18.004492] [<ffff000008084c98>] ret_from_fork+0x10/0x18
  • [ 18.009805] SMP: stopping secondary CPUs
  • [ 18.013726] Kernel Offset: disabled
  • [ 18.017210] CPU features: 0x1802000
  • [ 18.020693] Memory Limit: none
  • [ 18.023748] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(179,1)
  • [ 23.009455] renesas_sdhi_internal_dmac ee140000.sd: timeout waiting for hardware interrupt (CMD8)
  • [ 23.047503] mmc0: error -110 whilst initialising MMC card
22:38, 21 February 2019

Could you try the followings?

- Can you access your SD card(partition 1 = rootfs) from a PC?

- Try with the latest BSP(Yocto v3.15.0).

- Format the SD card and try again.

- Try with another SD card.

01:30, 17 April 2019
 

Booting of kernel stops at [ 23.047503] mmc0: error -110 whilst initialising MMC card

A thread, Thread:Talk:R-Car/Boards/M3SK/Booting of kernel stops at 23.047503 mmc0: error -110 whilst initialising MMC card, was moved from here to User talk:Pozos. This move was made by Pozos (talk | contribs) on 22 February 2019 at 05:28.

Booting of kernel stops at [ 23.047503] mmc0: error -110 whilst initialising MMC card

A thread, Thread:Talk:R-Car/Boards/M3SK/Booting of kernel stops at 23.047503 mmc0: error -110 whilst initialising MMC card (2), was moved from here to User talk:Pozos. This move was made by Pozos (talk | contribs) on 22 February 2019 at 05:27.

About rewrite of minimonitor

Even though you performed "3. Power on the board" of "Flashing firmware" and power on the board by pushing SW8,
if minimonitor does not start up, there is a possibility that the minimonitor of QSPI - FLASH has disappeared I think.
Where can writeinformation for minimonitor rewrite (SCIF mode boot loader and minimonitor) be available?

21:32, 25 March 2018

Is it possible to solve by using v302.zip linked to Kingfisher's page ?
https://elinux.org/R-Car/Boards/Kingfisher#How_to_update_of_Sample_Loader_and_MiniMonitor

01:42, 19 April 2018
 

the guaranteed insertion number of COM Express type connector

How many times is the guaranteed insertion number of "CN1 COM Express type connector 440 pin (3-5353652-6)"?

17:27, 5 July 2017

(Sorry for late reply)
According to the internet information it is 30 times.

BTW, For the questions of H3 SK and M3 SK please use the following.
https://elinux.org/Talk:R-Car/Boards/Yocto-Gen3

20:17, 24 October 2017

You do not have permission to edit this page, for the following reasons:

  • The action you have requested is limited to users in the group: Users.
  • You must confirm your email address before editing pages. Please set and validate your email address through your user preferences.

You can view and copy the source of this page.

Return to Thread:Talk:R-Car/Boards/M3SK/the guaranteed insertion number of COM Express type connector/reply (2).