View source for Talk:R-Car/Boards/Yocto-Gen3

From eLinux.org
Jump to: navigation, search

We have moved Q&A page to Renesas Rulz site.
Please submit a question to new site.
URL: http://renesasrulz.com/r-car-h3-m3-cockpit/

Contents

Thread titleRepliesLast modified
Build for Yocto Gen3 not completing.215:00, 27 June 2017
Firmware update hangs518:57, 18 June 2017
CA57CA53BOOT217:56, 21 May 2017
I can not build Linux (2.16.0) for HAD Solution Kit.322:57, 5 March 2017
Error in Bitbake417:56, 5 March 2017
I can't build Linux for the R-Car-M3 Starter Kit Pro.317:52, 21 December 2016
First page
First page
Next page
Next page
Last page
Last page

Build for Yocto Gen3 not completing.

I started developing the Yocto Gen3 for the Renesas M3SK. I followed the guide at the link: http://elinux.org/R-Car/Boards/Yocto-Gen3

I was able to complete till step 11 in the 'Building the BSP for Renesas H3ULCB, M3ULCB section'. During the bitbake process I got an error as follows.

NOTE: Sending SIGTERM to runqemu WARNING: Qemu ended unexpectedly, dump data from host is in /tmp/oe-saved-tests/201706200953_qemu DEBUG: Python function do_testimage_auto finished ERROR: Function failed: do_testimage_auto ERROR: Task 10 (/home/pisquare-dev/Yocto/build/build/../poky/meta/recipes-graphics/images/core-image-weston.bb, do_testimage_auto) failed with exit code '1' NOTE: Tasks Summary: Attempted 5155 tasks of which 5154 didn't need to be rerun and 1 failed. No currently running tasks (5154 of 5156)

Summary: 1 task failed:

 /home/pisquare-dev/Yocto/build/build/../poky/meta/recipes-graphics/images/core-image-weston.bb, do_testimage_auto


Please help me with this issue.

09:16, 20 June 2017

You do not have permission to edit this page, for the following reasons:

  • The action you have requested is limited to users in the group: Users.
  • You must confirm your email address before editing pages. Please set and validate your email address through your user preferences.

You can view and copy the source of this page.

Return to Thread:Talk:R-Car/Boards/Yocto-Gen3/Build for Yocto Gen3 not completing./reply.

That worked out

Thanks for the assist !

15:00, 27 June 2017
 
 

Firmware update hangs

I got a new WS1.1 Premier starter kit, tried to build 2.19.0 but the kernel was crashing.

Tried to upgrade the firmware, but it failed to download bl2 srec. Now, it is not even booting into u-boot.

I tried downloading the firmware from windows PC (Teraterm) and Linux (minicom), boot params is getting programmed. I can't program none of the other firmware as given in the instructions.

Either it hangs after sending the file (bl2, bl32, cert), or over size error (uboot)

Any inputs to recover the board is welcome.

KarthikShanmugam (talk)10:41, 31 May 2017

Address of bl2 has been chenged from Yocto v2.17.0. Please check the following page. http://elinux.org/R-Car/Boards/H3SK#Flashing_firmware

Ygohda (talk)19:39, 4 June 2017

yeah, following the exact instruction in your link. After downloading the bl2 the mini monitor is stuck.

I see that the board can boot into SCIF download, is it possible recover the board by this route?

KarthikShanmugam (talk)03:30, 5 June 2017

I've attached the my log.

H3 SAMPLE LOADER V1.16 2016.10.24                                                          
 CPU   : AArch64 CA57                                                                      
 DRAM  : LPDDR4 DDR3200 DEVICE: QSPI Flash(S25FS128) at 40MHz DMA                          
 BOOT  : Normal Boot                                                                       
 Backup: DDR Cold Boot                                                                     
                                                                                           
 jump to 0xE6330000                                                                        
                                                                                           
H3 MiniMonitor V0.23 2016.10.24                                                            
 Work Memory SystemRAM (H'E6328000-H'E632FFFF)                                             
>                                                                                          
>                                                                                          
>xls2                                                                                      
===== Qspi/HyperFlash writing of Gen3 Board Command =============                          
Load Program to Spiflash                                                                   
Writes to any of SPI address.                                                              
Please select,FlashMemory.                                                                 
   1 : QspiFlash       (U5 : S25FS128S)                                                    
   2 : QspiFlash Board (CN2: S25FL512S)                                                    
   3 : HyperFlash      (SiP internal)                                                      
  Select (1-3)>3                                                                           
 READ ID OK.                                                                               
Program Top Address & Qspi/HyperFlash Save Address                                         
===== Please Input Program Top Address ============                                        
  Please Input : H'e6304000                                                                
                                                                                           
===== Please Input Qspi/HyperFlash Save Address ===                                        
  Please Input : H'40000                                                                   
Work RAM(H'50000000-H'53FFFFFF) Clear....
please send ! ('.' & CR stop load)                                                         
H'00040000-0007FFFF Erasing..Erase Completed 
SAVE SPI-FLASH....... complete!

======= Qspi/HyperFlash Save Information  =================
 SpiFlashMemory Stat Address : H'00040000
 SpiFlashMemory End Address  : H'0005B03B
===========================================================

>

If you don't solve it please attach your log.

Ygohda (talk)01:38, 6 June 2017

Issue is not yet resolved, please see log below.


H3 SAMPLE LOADER V1.17 2016.11.08

CPU   : AArch64 CA57
DRAM  : LPDDR4 DDR3200
DEVICE: QSPI Flash(S25FS128) at 40MHz DMA
BOOT  : Normal Boot
Backup: DDR Cold Boot
jump to 0xE6330000

H3 MiniMonitor V0.24 2016.11.08

Work Memory SystemRAM (H'E6328000-H'E632FFFF)

>xls2

Qspi/HyperFlash writing of Gen3 Board Command ========[edit]

Load Program to Spiflash Writes to any of SPI address. Please select,FlashMemory.

  1 : QspiFlash       (U5 : S25FS128S)
  2 : QspiFlash Board (CN2: S25FL512S)
  3 : HyperFlash      (SiP internal)
 Select (1-3)>3
READ ID OK.

Program Top Address & Qspi/HyperFlash Save Address

Please Input Program Top Address =======[edit]
 Please Input : H'e6320000

== Please Input Qspi/HyperFlash Save Address[edit]

 Please Input : H'0

Work RAM(H'50000000-H'53FFFFFF) Clear.... please send ! ('.' & CR stop load) SPI Data Clear(H'FF) Check :H'00000000-0003FFFF Erasing..Erase Completed SAVE SPI-FLASH....... complete!

= Qspi/HyperFlash Save Information ===========[edit]
SpiFlashMemory Stat Address : H'00000000
SpiFlashMemory End Address  : H'00000E67
===============================================[edit]

>xls2

Qspi/HyperFlash writing of Gen3 Board Command ========[edit]

Load Program to Spiflash Writes to any of SPI address. Please select,FlashMemory.

  1 : QspiFlash       (U5 : S25FS128S)
  2 : QspiFlash Board (CN2: S25FL512S)
  3 : HyperFlash      (SiP internal)
 Select (1-3)>3
READ ID OK.

Program Top Address & Qspi/HyperFlash Save Address

Please Input Program Top Address =======[edit]
 Please Input : H'44000000

== Please Input Qspi/HyperFlash Save Address[edit]

 Please Input : H'1C0000

Work RAM(H'50000000-H'53FFFFFF) Clear.... please send ! ('.' & CR stop load) Program over size Error

SpiFlashMemory Stat Address : H'001C0000
SpiFlashMemory End Address  : H'105C05D3

>xls2

Qspi/HyperFlash writing of Gen3 Board Command ========[edit]

Load Program to Spiflash Writes to any of SPI address. Please select,FlashMemory.

  1 : QspiFlash       (U5 : S25FS128S)
  2 : QspiFlash Board (CN2: S25FL512S)
  3 : HyperFlash      (SiP internal)
 Select (1-3)>3
READ ID OK.

Program Top Address & Qspi/HyperFlash Save Address

Please Input Program Top Address =======[edit]
 Please Input : H'e6302000

== Please Input Qspi/HyperFlash Save Address[edit]

 Please Input : H'40000

Work RAM(H'50000000-H'53FFFFFF) Clear.... please send ! ('.' & CR stop load)

KarthikShanmugam (talk)02:25, 8 June 2017

> Please Input : H'e6302000 This is wrong address. e6304000 is correct.

I added a table to the wiki. please check again.

http://elinux.org/R-Car/Boards/H3SK#Flashing_firmware

Ygohda (talk)18:57, 18 June 2017
 
 
 
 
 

CA57CA53BOOT

Currently, two CA57s are running in StarterKitPro. Could you tell me how to boot with six cores total of two CA57s and four CA53s?

To try it here, CA57CA53BOOT = "1" was added to local.conf.

root@m3ulcb:~# cat /proc/cpuinfo
processor       : 0
BogoMIPS        : 16.66
Features        : fp asimd evtstrm aes pmull sha1 sha2 crc32
CPU implementer : 0x41
CPU architecture: 8
CPU variant     : 0x1
CPU part        : 0xd07
CPU revision    : 3

processor       : 1
BogoMIPS        : 16.66
Features        : fp asimd evtstrm aes pmull sha1 sha2 crc32
CPU implementer : 0x41
CPU architecture: 8
CPU variant     : 0x1
CPU part        : 0xd07
CPU revision    : 3
ryuohno (talk)00:55, 16 May 2017

Hi

This is quoted from the AGL mailing list.

[agl-discussions] A53 CPU on renesas board? 2017/05/10 (水) 18:01

> Out of curiosity, A53 cores on R-Car board (in additoin to A57 cores) could also be enabled for AGL system easily (for accelaration), or rather to be used to host different OSs?
>
Hello,
In order to enable the A53 CPU's on the r-car boards, you need to add this line in
meta-rcar/meta-rcar-gen3/recipes-bsp/arm-trusted-firmware/arm-trusted-firmware_git.bb:
export PSCI_DISABLE_BIGLITTLE_IN_CA57BOOT="0"
and rebuild and reflash the firmware as explained in http://elinux.org/R-Car/Boards/M3SK.

Is this useful for you?

Ygohda (talk)23:25, 17 May 2017

Thank you very much.
I solved it.

ryuohno (talk)17:56, 21 May 2017
 
 

I can not build Linux (2.16.0) for HAD Solution Kit.

I am trying to build Linux (2.16.0) for HAD Solution Kit.
However, the following error message appears and can not be built.
Is there anything you can understand?

ERROR: gstreamer1.0-plugins-bad-1.6.3-r0 do_init_submodule: Function failed: do_init_submodule (log file is located at /mnt/work/build/tmp/work/aarch64-poky-linux/gstreamer1.0-plugins-bad/1.6.3-r0/temp/log.do_init_submodule.18637)
ERROR: Logfile of failure stored in: /mnt/work/build/tmp/work/aarch64-poky-linux/gstreamer1.0-plugins-bad/1.6.3-r0/temp/log.do_init_submodule.18637
ERROR: Task 1796 (/mnt/work/build/../poky/meta/recipes-multimedia/gstreamer/gstreamer1.0-plugins-bad_1.6.3.bb, do_init_submodule) failed with exit code '1'
ERROR: gstreamer1.0-plugins-good-1.6.3-r0 do_init_submodule: Function failed: do_init_submodule (log file is located at /mnt/work/build/tmp/work/aarch64-poky-linux/gstreamer1.0-plugins-good/1.6.3-r0/temp/log.do_init_submodule.23409)
ERROR: Logfile of failure stored in: /mnt/work/build/tmp/work/aarch64-poky-linux/gstreamer1.0-plugins-good/1.6.3-r0/temp/log.do_init_submodule.23409
ERROR: Task 1782 (/mnt/work/build/../poky/meta/recipes-multimedia/gstreamer/gstreamer1.0-plugins-good_1.6.3.bb, do_init_submodule) failed with exit code '1'
ERROR: kernel-module-vspm-1.0-r0 do_populate_lic: The recipe kernel-module-vspm is trying to install files into a shared area when those files already exist. Those files and their manifest location are:
/mnt/work/build/tmp/deploy/licenses/kernel-module-vspm/generic_MIT
Matched in manifest-salvator_x-kernel-module-vspm.populate_lic
/mnt/work/build/tmp/deploy/licenses/kernel-module-vspm/GPL-COPYING
Matched in manifest-salvator_x-kernel-module-vspm.populate_lic
/mnt/work/build/tmp/deploy/licenses/kernel-module-vspm/generic_GPLv2
Matched in manifest-salvator_x-kernel-module-vspm.populate_lic
/mnt/work/build/tmp/deploy/licenses/kernel-module-vspm/recipeinfo
Matched in manifest-salvator_x-kernel-module-vspm.populate_lic
/mnt/work/build/tmp/deploy/licenses/kernel-module-vspm/MIT-COPYING
Matched in manifest-salvator_x-kernel-module-vspm.populate_lic
Please verify which recipe should provide the above files.
The build has stopped as continuing in this scenario WILL break things, if not now, possibly in the future (we've seen builds fail several months later). If the system knew how to recover from this automatically it would however there are several different scenarios which can result in this and we don't know which one this is. It may be you have switched providers of something like virtual/kernel (e.g. from linux-yocto to linux-yocto-dev), in that case you need to execute the clean task for both recipes and it will resolve this error. It may be you changed DISTRO_FEATURES from systemd to udev or vice versa. Cleaning those recipes should again resolve this error however switching DISTRO_FEATURES on an existing build directory is not supported, you should really clean out tmp and rebuild (reusing sstate should be safe). It could be the overlapping files detected are harmless in which case adding them to SSTATE_DUPWHITELIST may be the correct solution. It could also be your build is including two different conflicting versions of things (e.g. bluez 4 and bluez 5 and the correct solution for that would be to resolve the conflict. If in doubt, please ask on the mailing list, sharing the error and filelist above.
ERROR: kernel-module-vspm-1.0-r0 do_populate_lic: If the above message is too much, the simpler version is you're advised to wipe out tmp and rebuild (reusing sstate is fine). That will likely fix things in most (but not all) cases.
ERROR: kernel-module-vspm-1.0-r0 do_populate_lic: Function failed: sstate_task_postfunc
ERROR: Logfile of failure stored in: /mnt/work/build/tmp/work/h3ulcb-poky-linux/kernel-module-vspm/1.0-r0/temp/log.do_populate_lic.16804
ERROR: Task 1578 (/mnt/work/build/../meta-renesas/meta-rcar-gen3/recipes-kernel/kernel-module-vspm/kernel-module-vspm.bb, do_populate_lic) failed with exit code '1'
ryuohno (talk)03:45, 1 March 2017
$ sudo apt-get update
$ sudo apt-get upgrade

I am doing these, but it is not going well.

ryuohno (talk)04:05, 1 March 2017
 

Please hold on until the end of this week

The BSP2.16 supports only basic/reference boards

HAD and .View boards will be added this week.

Please use temporary bsp2.12 http://elinux.org/R-Car/Boards/Yocto-Gen3-legacy

05:24, 1 March 2017

Regarding Yocto 2.16.0 for HAD solution kit, we tried 5155 tasks which were all successful, without having to retry.
Thank you.

ryuohno (talk)22:52, 5 March 2017
 
 

Error in Bitbake

Hi

I followed all the steps to make yocto image.
I get the following error during bitbake.
Please tell me How can i solve this error.

Regard.



Build Configuration:
BB_VERSION = "1.28.0"
BUILD_SYS = "x86_64-linux"
NATIVELSBSTRING = "Ubuntu-14.04"
TARGET_SYS = "aarch64-poky-linux"
MACHINE = "m3ulcb"
DISTRO = "poky"
DISTRO_VERSION = "2.0.2"
TUNE_FEATURES = "aarch64 cortexa57-cortexa53"
TARGET_FPU = ""
SOC_FAMILY = "rcar-gen3:r8a7796"
meta
meta-yocto
meta-yocto-bsp = "tmp:40376446904ae3529be41737fed9a0b650ed167d"
meta-rcar-gen3 = "v2.12.0:2b0598e0a252a8cf1dc4edacf4ef3a7071dbfd87"
meta-linaro-toolchain = "tmp:9b1fd178309544dff1f7453e796a9437125bc0d9"
meta-oe = "tmp:8ab04afbffb4bc5184cfe0655049de6f44269990"






In file included from .../work/build/tmp/work/aarch64-poky-linux/gstreamer1.0-plugins-bad/1.4.5-r0/git/ext/wayland/gstwaylandsink.h:30:0,
from .../work/build/tmp/work/aarch64-poky-linux/gstreamer1.0-plugins-bad/1.4.5-r0/git/ext/wayland/gstwaylandsink.c:44:
.../work/build/tmp/work/aarch64-poky-linux/gstreamer1.0-plugins-bad/1.4.5-r0/git/ext/wayland/wldisplay.h:27:42: fatal error: linux-dmabuf-client-protocol.h: No such file or directory
compilation terminated.
make[3]: *** [libgstwaylandsink_la-gstwaylandsink.lo] Error 1
make[3]: Leaving directory `.../work/build/tmp/work/aarch64-poky-linux/gstreamer1.0-plugins-bad/1.4.5-r0/build/ext/wayland'
make[2]: *** [wayland] Error 2
make[2]: Leaving directory `.../work/build/tmp/work/aarch64-poky-linux/gstreamer1.0-plugins-bad/1.4.5-r0/build/ext'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `.../work/build/tmp/work/aarch64-poky-linux/gstreamer1.0-plugins-bad/1.4.5-r0/build'
make: *** [all] Error 2
WARNING: exit code 1 from a shell command.
ERROR: oe_runmake failed
ERROR: Function failed: do_compile (log file is located at .../work/build/tmp/work/aarch64-poky-linux/gstreamer1.0-plugins-bad/1.4.5-r0/temp/log.do_compile.2811)
ERROR: Task 2138 (.../work/build/../poky/meta/recipes-multimedia/gstreamer/gstreamer1.0-plugins-bad_1.4.5.bb, do_compile) failed with exit code '1'
NOTE: Tasks Summary: Attempted 2510 tasks of which 2509 didn't need to be rerun and 1 failed.
No currently running tasks (2509 of 4905)

Ksawa (talk)20:40, 12 January 2017

Hi

I have the same problem. Did anyone find any solution in the meantime?

Regard.

VikiC (talk)07:43, 23 February 2017

I am using ubuntu 14.04 LTE. I solved it by executing the following command.

 $ sudo apt-get update
 $ sudo apt-get upgrade

After that,

 $ sudo apt-get install ***

Was executed.

ryuohno (talk)03:58, 1 March 2017

And *** stands for what?

VikiC (talk)07:44, 2 March 2017

The

"apt-get install gawk wget git-core diffstat unzip texinfo gcc-multilib build-essential chrpath socat libsdl1.2-dev xterm python-crypto"

It is.

That is,

sudo apt-get install gawk wget git-core diffstat unzip texinfo gcc-multilib build-essential chrpath socat libsdl1.2-dev xterm python-crypto

execute.

ryuohno (talk)17:56, 5 March 2017
 
 
 
 

I can't build Linux for the R-Car-M3 Starter Kit Pro.

I tried building Linux for the R-Car-M3 Starter Kit Pro according to the guide, It can not be built due to an error in bitbake.
Please tell me how to solve it.

The operation is as follows.

First, I downloaded and unpacked zip files.
R-Car_Gen3_Series_Evaluation_Software_Package_of_Linux_Drivers-20160906.zip
R-Car_Gen3_Series_Evaluation_Software_Package_for_Linux-20160906.zip

Then I unzipped these.
R-Car_Gen3_Series_Evaluation_Software_Package_of_Linux_Drivers-20160906.tar.gz
R-Car_Gen3_Series_Evaluation_Software_Package_for_Linux-20160906.tar.gz

Next, I installed the package.
$ sudo apt-get install gawk wget git-core diffstat unzip texinfo gcc-multilib build-essential chrpath socat libsdl1.2-dev xterm python-crypto

I built a BSP.

1.
$ mkdir build
$ cd build
$ export WORK=`pwd`

2.
cd $WORK
$ git clone git://git.yoctoproject.org/poky
$ git clone git://git.openembedded.org/meta-openembedded
$ git clone git://git.linaro.org/openembedded/meta-linaro.git

3.
$ cd $WORK/poky
$ git checkout -b tmp 40376446904ae3529be41737fed9a0b650ed167d
$ cd $WORK/meta-openembedded
$ git checkout -b tmp 8ab04afbffb4bc5184cfe0655049de6f44269990
$ cd $WORK/meta-linaro
$ git checkout -b tmp 9b1fd178309544dff1f7453e796a9437125bc0d9

4.
$ cd $WORK
$ git clone git://github.com/CogentEmbedded/meta-rcar.git meta-renesas -b v2.12.0

5.
$ cd $WORK/meta-renesas
$ export PATCH_DIR=meta-rcar-gen3/docs/sample/patch/patch-for-linaro-gcc
$ patch -p1 < ${PATCH_DIR}/0001-rcar-gen3-add-readme-for-building-with-Linaro-Gcc.patch
$ unset PATCH_DIR

6.
$ ls -1 $WORK/proprietary
R-Car_Gen3_Series_Evaluation_Software_Package_for_Linux-20160906.tar.gz
R-Car_Gen3_Series_Evaluation_Software_Package_of_Linux_Drivers-20160906.tar.gz

7.
$ export PKGS_DIR=$WORK/proprietary
$ cd $WORK/meta-renesas
$ sh meta-rcar-gen3/docs/sample/copyscript/copy_evaproprietary_softwares.sh -f $PKGS_DIR
$ unset PKGS_DIR

8.
$ cd $WORK
$ source poky/oe-init-build-env

9.
$ cp $WORK/meta-renesas/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/mmp/*.conf ./conf/
$ cd $WORK/build
$ cp conf/local-wayland.conf conf/local.conf

10.
I am not care.

11.
enabled
MACHINE_FEATURES_append = " m3ulcb-view"

12.
enabled
DISTRO_FEATURES_append = " use_eva_pkg"

13.
$ bitbake core-image-weston


At this time, the following error message was output.

 ERROR: Nothing PROVIDES 'python-pycrypto-native' (but /media/rcar/Test_M3_Starterkitpro_yocto2.12.0/work/build/build/../meta-renesas/meta-rcar-gen3/recipes-bsp/optee/optee-os_git.bb DEPENDS on or otherwise requires it). Close matches:
   python-pycairo-native
   python-pycurl-native
   python-pyrex-native
 ERROR: Required build target 'core-image-weston' has no buildable providers.
 Missing or unbuildable dependency chain was: ['core-image-weston', 'optee-os', 'python-pycrypto-native']


Ryuohno (talk)04:31, 14 December 2016

I have corrected the link for the BSP download on that page, and have now overcome this build issue. Please have a look at updated step 4 in the build instructions.

Pat Shelly

PatShelly (talk)12:04, 15 December 2016
 
14:00, 15 December 2016

Thank you for your support.
If there is something again, thank you.

ryuohno (talk)17:52, 21 December 2016
 
 
First page
First page
Next page
Next page
Last page
Last page