Talk:RPI-Wireless-Hotspot

From eLinux.org
Jump to: navigation, search

ok, now how to build on this and make a wireless wifi bridge to extend wifi service range? Thereby, a hot spot and one end of a building can serve to the other end, although that is beyond the gear' range- due to a pi serving midway as a relay system.


now this works as a public access hot-spot, when you follow the instructions and try to build a secured network, it refuses to start the network; no beacon. no presence my spectrum scanner can detect, the used channel is dark. anyone got a clue?


You cannot post new threads to this discussion page because it has been protected from new threads, or you do not currently have permission to edit.

Contents

Thread titleRepliesLast modified
IP address disappears006:54, 21 April 2015
Will it work ?004:58, 20 November 2013

IP address disappears

I adapted this script to provide a portable Wi-Fi hotspot running on a Raspberry Pi (NOOBS 1.4.0) with two Wi-Fi dongles. I had a lot of problems, sometimes with DHCP not working and sometimes with the wireless GUI reporting "Could not get status from wpa_supplicant".

It appears to be due to the IP address disappearing on one or other of the interface when either hostapt or udhcpd loads. The solution is to edit /etc/default/ifplugd and setting:

   INTERFACES to "" (was "auto")
   HOTPLUG_INTERFACES to "" (was "all")

My thanks to sirlagz for the solution which can be found here:

   http://sirlagz.net/2013/02/10/how-to-use-the-raspberry-pi-as-a-wireless-access-pointrouter-part-3b/
06:54, 21 April 2015

Will it work ?

Hi ! I just bought a Raspberry Pi Model B and I would like to know if my dongle (http://tellu.re/HYTODq) was supported. Thank you in advance :)

04:58, 20 November 2013