The Undocumented Pi

Back to the Hub.

Resources:

Hardware & Peripherals:

Hardware and Hardware History.

Low-level Peripherals and Expansion Boards.

Screens, Cases and Other Peripherals.

Software & OS Distributions:

Software and Distributions

Documentation:

Documentation Page

The Undocumented Pi

Hardware

SoC

There is a nicely ordered table with all BCM2835_registers as found in the GPU code published by Broadcom. Unfortunately, the table does not quite match the SoC in the Raspberry Pi, but it's a good start. The sections below should serve as a companion to that table.

Clocks

BCM283x

There is a VCE block to accelerate video encoding/decoding. No documentation AFAIK.

BCM2711

The BCM2711 does not have PLLH. It also lacks the following clock muxes:

• GNRIC
• CCP2
• HSM (controlled through other registers?)
• SLIM
• SDC (secondary SDRAM clock)
• ARM (controlled through other registers?)
• AVEO

It has the following extra clock mux registers (their names are just made up, because there is no official documentation):

name	address	type	width	mask	reset	description
CM_HEVCCTL	0x7e1011c8	RW	20	???	0000000000
CM_HEVCDIV	0x7e1011cc	RW	24	0x00ffffff	0000000000
CM_EMMC2CTL	0x7e1011d0	RW	20	???	0000000000
CM_EMMC2DIV	0x7e1011d4	RW	24	0x00ffffff	0000000000
CM_GENET250CTL	0x7e1011e8	RW	20	???	0000000000
CM_GENET250DIV	0x7e1011ec	RW	24	0x00ffffff	0000000000
CM_STB27CTL	0x7e1011f0	RW	20	???	0000000000
CM_STB27DIV	0x7e1011f4	RW	24	0x00ffffff	0000000000
CM_STB108CTL	0x7e101200	RW	20	???	0000000000
CM_STB108DIV	0x7e101204	RW	24	0x00ffffff	0000000000
CM_PIXBVBCTL	0x7e101208	RW	20	???	0000000000
CM_PIXBVBDIV	0x7e10120c	RW	24	0x00ffffff	0000000000
CM_GENET125CTL	0x7e101210	RW	20	???	0000000000
CM_GENET125DIV	0x7e101214	RW	24	0x00ffffff	0000000000
CM_M2MCCTL	0x7e10122c	RW	20	???	0000000000
CM_M2MCDIV	0x7e101230	RW	24	0x00ffffff	0000000000
CM_USBXHCICTL	0x7e10123c	RW	20	???	0000000000
CM_USBXHCIDIV	0x7e101240	RW	24	0x00ffffff	0000000000

The VCE block was apparently removed, but there is now a HEVC block.

PMIC

The BCM2835 chip has an on-chip SMPS and an LDO for the LPDDR2 memory chip. RPi2 and RPi3 B use custom circuitry made of discrete components to do the power-up sequencing, including an NCP6343 chip (datasheet) at I²C address 0x1c. The RPi 3B+ and RPi 4B boards contain a MaxLinear MxL7704 (datasheet) at address 0x1d.

The PMIC is always on the system I²C bus (I2C8 on RPi4, I2C0 on all other devices).

See also this very informative blog post by James Adams.

Abbreviations

CM

Clock Manager

HSM

HDMI State Machine

OTP

One-Time Programmable (memory)