"FTDI 3 Pin Cable" description looks incorrect

Jump to: navigation, search

Everyone.

Please allow me if my understanding is incorrect. To my best knowledge, FTDI cable (TTL-232R-RPi)'s yellow wire is input signal toward PC. It is designed to connect to RPi's TXD pin. And orange wire is output signal from PC. So my understanding is, right connection is as following. 

 Board     Wire       Function
 Pin 1.....Black......Ground
 Pin 4.....Orange.....PC (TXD) to BBB (RXD)
 Pin 5.....Yellow.....BBB (TXD) to PC (RXD)

Confirmed on the BBB schematics and DMM, and also experimented by myself.

Regards, Atsushi Yokoyama

Ayokoyama (talk)

‎06:26, 7 December 2015

You do not have permission to edit this page, for the following reasons:

  • The action you have requested is limited to users in the group: Users.
  • You must confirm your email address before editing pages. Please set and validate your email address through your user preferences.

You can view and copy the source of this page.

Return to Thread:Beagleboard talk:BeagleBone Black Serial/"FTDI 3 Pin Cable" description looks incorrect/reply.

 
Retrieved from "https://elinux.org/Thread:Beagleboard_talk:BeagleBone_Black_Serial/%22FTDI_3_Pin_Cable%22_description_looks_incorrect#x.22FTDI_3_Pin_Cable.22_description_looks_incorrect_2156"