image for IDP JTAG Lure needs to be refreshed

Jump to: navigation, search

wait a minute! a closer examination of Revision A2 doesn't look right either!

per the prints and footprints at https://www.samtec.com/technical-specifications/Default.aspx?SeriesMaster=BSH:

- PDF File  BSH - .5mm (.0197") Basic Socket Strip
- PDF File  BSH - Surface Mount Footprint

shouldn't the alignment pins be on the pin-2 side?!

06:36, 30 April 2015

Has anyone successfully used this adapter, in any revision, in combination with an Intel ITP kit (XDP3) or equivalent (such as ASSET USB-XDP3, PODII or Arium XDP3/XDP3e?)??

06:38, 30 April 2015

We've got some internally that we know work, if it would be helpful I'm happy to double check the schematic vs. what we've got and know works, if they are wrong I can let the manufacturer know, see if we can get a more up to date set of files put together.

10:29, 30 April 2015

You do not have permission to edit this page, for the following reasons:

  • The action you have requested is limited to users in the group: Users.
  • You must confirm your email address before editing pages. Please set and validate your email address through your user preferences.

You can view and copy the source of this page.

Return to Thread:Minnowboard talk:MaxLures/image for IDP JTAG Lure needs to be refreshed/reply (5).