Flash unsuccessful

Jump to: navigation, search

You do not have permission to edit this page, for the following reasons:

  • The action you have requested is limited to users in the group: Users.
  • You must confirm your email address before editing pages. Please set and validate your email address through your user preferences.

You can view and copy the source of this page.

Return to Thread:Talk:BeagleBone Black Extracting eMMC contents/Flash unsuccessful/reply (2).

Very Important:

When using the REV C BBB from element14, the folder created should be named "dtbs". The above post has a mistake.

Brghena (talk)‎15:42, 2 December 2015
 

I got a new cards from Embest. This solution isn't works. It mean "Copy the entire content of https://s3.amazonaws.com/beagle/beagleboneblack-save-emmc.zip" not allow me to flash an image.

May be exist an other way?

Shimon (talk)‎10:53, 5 December 2017

It's not flashing it's copying. You have to unzip that file either directly to the sdcard or to your hard drive and then copy it to the sdcard.

Wmat (talk)‎11:01, 5 December 2017
 
 
Retrieved from "https://elinux.org/Thread:Talk:BeagleBone_Black_Extracting_eMMC_contents/Flash_unsuccessful/reply_(2)#Flash_unsuccessful_3376"