Flash unsuccessful

Fragment of a discussion from Talk:BeagleBone Black Extracting eMMC contents
← Thread:Talk:BeagleBone Black Extracting eMMC contents/Flash unsuccessful/reply (5)

Jump to: navigation, search

Interesting. I have to say I've not seen this problem, however, if I understand correctly, cloning is being used to copy the image from a working Rev.C BBB to other Rev.C BBBs? I guess I'm a little confused, as I'm wondering why? If you have a flasher-image on an sdcard, why wouldn't you just use that to flash each Rev.C board?

‎

You do not have permission to edit this page, for the following reasons:

The action you have requested is limited to users in the group: Users.
You must confirm your email address before editing pages. Please set and validate your email address through your user preferences.

You can view and copy the source of this page.

IN my case and probably others.  I have created overlays for a custom cape.  Added libraries, software, image etc. I documented it this time, but it took 2 hours to do it.  Ok, I was side tracked some, but with cloning you turn it on and wait for the LEDs to stop blinking.  Who cares if you get side tracked.

Return to Thread:Talk:BeagleBone Black Extracting eMMC contents/Flash unsuccessful/reply (6).

Ah yes, that makes sense. You're right, it should just work. I'm not sure what's going on, hopefully someone from the Beagleboard team can help.

‎

Retrieved from "https://elinux.org/Thread:Talk:BeagleBone_Black_Extracting_eMMC_contents/Flash_unsuccessful/reply_(5)#Flash_unsuccessful_2271"