Flash unsuccessful

Jump to: navigation, search

Interesting. I have to say I've not seen this problem, however, if I understand correctly, cloning is being used to copy the image from a working Rev.C BBB to other Rev.C BBBs? I guess I'm a little confused, as I'm wondering why? If you have a flasher-image on an sdcard, why wouldn't you just use that to flash each Rev.C board?

Wmat (talk)

‎07:31, 14 June 2016

IN my case and probably others. I have created overlays for a custom cape. Added libraries, software, image etc. I documented it this time, but it took 2 hours to do it. Ok, I was side tracked some, but with cloning you turn it on and wait for the LEDs to stop blinking. Who cares if you get side tracked.

Rob1234 (talk)

‎10:04, 14 June 2016

You do not have permission to edit this page, for the following reasons:

  • The action you have requested is limited to users in the group: Users.
  • You must confirm your email address before editing pages. Please set and validate your email address through your user preferences.

You can view and copy the source of this page.

Return to Thread:Talk:BeagleBone Black Extracting eMMC contents/Flash unsuccessful/reply (7).

 
 
Retrieved from "https://elinux.org/Thread:Talk:BeagleBone_Black_Extracting_eMMC_contents/Flash_unsuccessful/reply_(5)#Flash_unsuccessful_2266"