Rev. C boards from Element14

Jump to: navigation, search

I think in this case you are using the S2 button to boot completely off the SD card and thereby getting a consistent U-Boot image. I'm just sticking the card in an powering up the board, which relies on the U-Boot image loaded on the eMMC. There's not a strong reason to do that except that booting without S2 is simpler and does not require using the barrel jack.

13:57, 2 January 2015

Ah, got it; thanks for the clarification -- I didn't realize you could bypass the S2 and barrel by doing it this way. This is handy :)

19:51, 2 January 2015