Support for BroadR Expansion board with BCM89810 PHY

Jump to: navigation, search

Hello.

Question: is there support for BCM89810 PHY and any driver for the BroadR Expansion board available?

Story:on the board V3H 1.1 we need to connect external Ethernet Transceiver, BroadR Expansion board with BCM89810 PHY. Unfortunately, the Linux provided by Yocto does not include a PHY driver for the BCM89810. And by default kernel log says "Generic PHY" is used, however the BroadR Expansion board has a BCM89810 PHY and error happens: [ 722.692976] Generic PHY e6800000.ethernet-ffffffff:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e6800000.ethernet-ffffffff:00, irq=POLL) [ 722.706407] IPv6: ADDRCONF: eth1: link is not ready

Sincerely, Yaroslav

Yaroslav Parkhomenko (talk)

‎03:26, 12 November 2020
Retrieved from "https://elinux.org/Thread:Talk:R-Car/Boards/Yocto-Gen3-ADAS/Support_for_BroadR_Expansion_board_with_BCM89810_PHY#Support_for_BroadR_Expansion_board_with_BCM89810_PHY_4251"