Thread history

From Talk:R-Car/Boards/Yocto-Gen3
Viewing a history listing
Jump to: navigation, search
Time User Activity Comment
23:36, 15 April 2019 Thisamatsu (talk | contribs)

New reply created

(Reply to AGL7.0 Home screen NOT displayed)
21:40, 15 April 2019 Ygohda (talk | contribs)

New reply created

(Reply to AGL7.0 Home screen NOT displayed)
20:35, 15 April 2019 Thisamatsu (talk | contribs)

New reply created

(Reply to AGL7.0 Home screen NOT displayed)
18:46, 15 April 2019 Ygohda (talk | contribs)

New reply created

(Reply to AGL7.0 Home screen NOT displayed)
00:51, 15 April 2019 Thisamatsu (talk | contribs)

New reply created

(Reply to AGL7.0 Home screen NOT displayed)
00:24, 15 April 2019 Ygohda (talk | contribs)

New reply created

(Reply to AGL7.0 Home screen NOT displayed)
21:48, 11 April 2019 Thisamatsu (talk | contribs)

Comment text edited

 
21:46, 11 April 2019 Thisamatsu (talk | contribs)

Comment text edited

 
21:03, 11 April 2019 Thisamatsu (talk | contribs)

New thread created

 

Hello.

I have encountered a problem with running AGL7.0 Guppy on R-Car Starter Kit Premier.
Although Linux is successfully booted up and I can login to the shell, the home screen is not displayed on the monitor which is connected to SK's micro HDMI port. (the monitor does not receive any signal at all from its HDMI input port)

I basically followed the instructions below and added agl-html5-framework feature in addition to agl-devel agl-demo agl-netboot agl-appfw-smack agl-localdev which are listed in the instruction.
And I also made changes in U-Boot environment as this page's thread "AGL 6.0.0 booting on R-Car H3 not completed". (bootargs and load_dtb).

http://docs.automotivelinux.org/next/docs/en/guppy/getting_started/reference/getting-started/machines/renesas.html

I will really appreciate it if anyone give me advises for solving this problem.

Boot log is shown below.

 [    0.000161] NOTICE:  BL2: R-Car Gen3 Initial Program Loader(CA57) Rev.1.0.21
 [    0.005726] NOTICE:  BL2: PRR is R-Car H3 Ver.2.0
 [    0.010395] NOTICE:  BL2: Board is Starter Kit Rev.1.0
 [    0.015507] NOTICE:  BL2: Boot device is HyperFlash(80MHz)
 [    0.020932] NOTICE:  BL2: LCM state is CM
 [    0.024972] NOTICE:  BL2: AVS setting succeeded. DVFS_SetVID=0x53
 [    0.030962] NOTICE:  BL2: DDR3200(rev.0.33)NOTICE:  [COLD_BOOT]NOTICE:  ..0
 [    0.067520] NOTICE:  BL2: DRAM Split is 4ch
 [    0.071402] NOTICE:  BL2: QoS is default setting(rev.0.19)
 [    0.076845] NOTICE:  BL2: DRAM refresh interval 1.95 usec
 [    0.082263] NOTICE:  BL2: Lossy Decomp areas
 [    0.086436] NOTICE:       Entry 0: DCMPAREACRAx:0x80000540 DCMPAREACRBx:0x570
 [    0.093521] NOTICE:       Entry 1: DCMPAREACRAx:0x40000000 DCMPAREACRBx:0x0
 [    0.100433] NOTICE:       Entry 2: DCMPAREACRAx:0x20000000 DCMPAREACRBx:0x0
 [    0.107347] NOTICE:  BL2: v1.4(release):15dba6b-dirty
 [    0.112356] NOTICE:  BL2: Built : 10:37:56, Apr  8 2019
 [    0.117543] NOTICE:  BL2: Normal boot
 [    0.121189] NOTICE:  BL2: dst=0xe6322300 src=0x8180000 len=512(0x200)
 [    0.127572] NOTICE:  BL2: dst=0x43f00000 src=0x8180400 len=6144(0x1800)
 [    0.134192] NOTICE:  BL2: dst=0x44000000 src=0x81c0000 len=65536(0x10000)
 [    0.141422] NOTICE:  BL2: dst=0x44100000 src=0x8200000 len=1048576(0x100000)
 [    0.156245] NOTICE:  BL2: dst=0x50000000 src=0x8640000 len=1048576(0x100000)
 
 
 U-Boot 2015.04 (Apr 08 2019 - 09:51:12)
 
 CPU: Renesas Electronics R8A7795 rev 2.0
 Board: H3ULCB
 I2C:   ready
 DRAM:  3.9 GiB
 Bank #0: 0x048000000 - 0x07fffffff, 896 MiB
 Bank #1: 0x500000000 - 0x53fffffff, 1 GiB
 Bank #2: 0x600000000 - 0x63fffffff, 1 GiB
 Bank #3: 0x700000000 - 0x73fffffff, 1 GiB
 
 Flash: 64 MiB
 MMC:   sh-sdhi: 0, sh-sdhi: 1
 In:    serial
 Out:   serial
 Err:   serial
 Net:   Board Net Initialization Failed
 No ethernet found.
 Hit any key to stop autoboot:  0
 19558912 bytes read in 4620 ms (4 MiB/s)
 71610 bytes read in 23 ms (3 MiB/s)
 ## Flattened Device Tree blob at 48000000
    Booting using the fdt blob at 0x48000000
    Using Device Tree in place at 0000000048000000, end 00000000480147b9
 
 Starting kernel ...
 
 [    0.000000] Booting Linux on physical CPU 0x0
 [    0.000000] Linux version 4.14.35-yocto-standard (oe-user@oe-host) (gcc version 7.3.0 (GCC)) #1 SMP PREEMPT Mon Apr 8 06:29:46 UTC 2019
 [    0.000000] Boot CPU: AArch64 Processor [411fd073]
 [    0.000000] Machine model: Renesas H3ULCB board based on r8a7795 ES1.x
 [    0.000000] debug: ignoring loglevel setting.
 [    0.000000] efi: Getting EFI parameters from FDT:
 [    0.000000] efi: UEFI not found.
 [    0.000000] Reserved memory: created CMA memory pool at 0x0000000057000000, size 400 MiB
 [    0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
 [    0.000000] Reserved memory: created CMA memory pool at 0x0000000070000000, size 256 MiB
 [    0.000000] OF: reserved mem: initialized node linux,multimedia, compatible id shared-dma-pool
 [    0.000000] NUMA: No NUMA configuration found
 [    0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x000000073fffffff]
 [    0.000000] NUMA: NODE_DATA [mem 0x73ff94b80-0x73ff9667f]
 [    0.000000] Zone ranges:
 [    0.000000]   DMA      [mem 0x0000000048000000-0x00000000ffffffff]
 [    0.000000]   Normal   [mem 0x0000000100000000-0x000000073fffffff]
 [    0.000000] Movable zone start for each node
 [    0.000000] Early memory node ranges
 [    0.000000]   node   0: [mem 0x0000000048000000-0x0000000053ffffff]
 [    0.000000]   node   0: [mem 0x0000000057000000-0x000000007fffffff]
 [    0.000000]   node   0: [mem 0x0000000500000000-0x000000053fffffff]
 [    0.000000]   node   0: [mem 0x0000000600000000-0x000000063fffffff]
 [    0.000000]   node   0: [mem 0x0000000700000000-0x000000073fffffff]
 [    0.000000] Initmem setup node 0 [mem 0x0000000048000000-0x000000073fffffff]
 [    0.000000] On node 0 totalpages: 1003520
 [    0.000000]   DMA zone: 3392 pages used for memmap
 [    0.000000]   DMA zone: 0 pages reserved
 [    0.000000]   DMA zone: 217088 pages, LIFO batch:31
 [    0.000000]   Normal zone: 12288 pages used for memmap
 [    0.000000]   Normal zone: 786432 pages, LIFO batch:31
 [    0.000000] psci: probing for conduit method from DT.
 [    0.000000] psci: PSCIv1.0 detected in firmware.
 [    0.000000] psci: Using standard PSCI v0.2 function IDs
 [    0.000000] psci: Trusted OS resident on physical CPU 0x0
 [    0.000000] psci: SMC Calling Convention v1.1
 [    0.000000] random: fast init done
 [    0.000000] percpu: Embedded 23 pages/cpu @ffff8006ffed7000 s55576 r8192 d30440 u94208
 [    0.000000] pcpu-alloc: s55576 r8192 d30440 u94208 alloc=23*4096
 [    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
 [    0.000000] Detected PIPT I-cache on CPU0
 [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 987840
 [    0.000000] Policy zone: Normal
 [    0.000000] Kernel command line: console=ttySC0,115200 ignore_loglevel vmalloc=384M video=HDMI-A-1:1920x1080-32@60 root=/dev/mmcblk0p1 rw rootfstype=ext4 rootwait rootdelay=2
 [    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
 [    0.000000] software IO TLB [mem 0x4ffff000-0x53fff000] (64MB) mapped at [ffff80000ffff000-ffff800013ffefff]
 [    0.000000] Memory: 3190004K/4014080K available (11324K kernel code, 1244K rwdata, 5332K rodata, 1152K init, 422K bss, 152332K reserved, 671744K cma-reserved)
 [    0.000000] Virtual kernel memory layout:
 [    0.000000]     modules : 0xffff000000000000 - 0xffff000008000000   (   128 MB)
 [    0.000000]     vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000   (129022 GB)
 [    0.000000]       .text : 0xffff000008080000 - 0xffff000008b90000   ( 11328 KB)
 [    0.000000]     .rodata : 0xffff000008b90000 - 0xffff0000090d0000   (  5376 KB)
 [    0.000000]       .init : 0xffff0000090d0000 - 0xffff0000091f0000   (  1152 KB)
 [    0.000000]       .data : 0xffff0000091f0000 - 0xffff000009327200   (  1245 KB)
 [    0.000000]        .bss : 0xffff000009327200 - 0xffff000009390b50   (   423 KB)
 [    0.000000]     fixed   : 0xffff7dfffe7f9000 - 0xffff7dfffec00000   (  4124 KB)
 [    0.000000]     PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000   (    16 MB)
 [    0.000000]     vmemmap : 0xffff7e0000000000 - 0xffff800000000000   (  2048 GB maximum)
 [    0.000000]               0xffff7e0000200000 - 0xffff7e001c000000   (   446 MB actual)
 [    0.000000]     memory  : 0xffff800008000000 - 0xffff800700000000   ( 28544 MB)
 [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
 [    0.000000] Preemptible hierarchical RCU implementation.
 [    0.000000]  RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
 [    0.000000]  Tasks RCU enabled.
 [    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
 [    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
 [    0.000000] GIC: Adjusting CPU interface base to 0x00000000f102f000
 [    0.000000] GIC: Using split EOI/Deactivate mode
 [    0.000000] arch_timer: cp15 timer(s) running at 8.33MHz (phys).
 [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x1ec02923e, max_idle_ns: 440795202125 ns
 [    0.000003] sched_clock: 56 bits at 8MHz, resolution 120ns, wraps every 2199023255496ns
 [    0.000339] Console: colour dummy device 80x25
 [    0.000378] Calibrating delay loop (skipped), value calculated using timer frequency.. 16.66 BogoMIPS (lpj=33333)
 [    0.000387] pid_max: default: 32768 minimum: 301
 [    0.000430] Security Framework initialized
 [    0.000440] Smack:  Initializing.
 [    0.000443] Smack:  IPv6 port labeling enabled.
 [    0.002001] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
 [    0.002792] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
 [    0.002836] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
 [    0.002866] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
 [    0.015958] ASID allocator initialised with 32768 entries
 [    0.023951] Hierarchical SRCU implementation.
 [    0.032423] Detected Renesas R-Car Gen3 r8a7795 ES2.0
 [    0.033545] EFI services will not be available.
 [    0.039974] smp: Bringing up secondary CPUs ...
 [    0.068145] Detected PIPT I-cache on CPU1
 [    0.068183] CPU1: Booted secondary processor [411fd073]
 [    0.096158] Detected PIPT I-cache on CPU2
 [    0.096176] CPU2: Booted secondary processor [411fd073]
 [    0.124190] Detected PIPT I-cache on CPU3
 [    0.124208] CPU3: Booted secondary processor [411fd073]
 [    0.152231] CPU features: enabling workaround for ARM erratum 845719
 [    0.152238] Detected VIPT I-cache on CPU4
 [    0.152273] CPU4: Booted secondary processor [410fd034]
 [    0.180252] Detected VIPT I-cache on CPU5
 [    0.180274] CPU5: Booted secondary processor [410fd034]
 [    0.208283] Detected VIPT I-cache on CPU6
 [    0.208304] CPU6: Booted secondary processor [410fd034]
 [    0.236316] Detected VIPT I-cache on CPU7
 [    0.236337] CPU7: Booted secondary processor [410fd034]
 [    0.236407] smp: Brought up 1 node, 8 CPUs
 [    0.236429] SMP: Total of 8 processors activated.
 [    0.236435] CPU features: detected feature: 32-bit EL0 Support
 [    0.236439] CPU features: detected feature: Kernel page table isolation (KPTI)
 [    0.242529] CPU: All CPU(s) started at EL2
 [    0.242550] alternatives: patching kernel code
 [    0.243108] devtmpfs: initialized
 [    0.248109] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
 [    0.248163] futex hash table entries: 2048 (order: 6, 262144 bytes)
 [    0.256042] pinctrl core: initialized pinctrl subsystem
 [    0.257385] DMI not present or invalid.
 [    0.257631] NET: Registered protocol family 16
 [    0.258973] cpuidle: using governor menu
 [    0.259164] vdso: 2 pages (1 code @ ffff000008b96000, 1 data @ ffff0000091f5000)
 [    0.259175] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
 [    0.259791] DMA: preallocated 256 KiB pool for atomic allocations
 [    0.260017] Serial: AMBA PL011 UART driver
 [    0.263521] sh-pfc e6060000.pin-controller: r8a77951_pfc support registered
 [    0.280499] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
 [    0.281488] ACPI: Interpreter disabled.
 [    0.283467] rcar-avs: use avs value: 0
 [    0.283531] rcar-avs: /cpus/cpu@0 is running with: /opp_table0
 [    0.283540] rcar-avs: /cpus/cpu@1 is running with: /opp_table0
 [    0.283547] rcar-avs: /cpus/cpu@2 is running with: /opp_table0
 [    0.283554] rcar-avs: /cpus/cpu@3 is running with: /opp_table0
 [    0.283569] rcar-avs: /soc/gsx@fd000000 is running with: /gsx_opp_table0
 [    0.284815] vgaarb: loaded
 [    0.284972] SCSI subsystem initialized
 [    0.285092] libata version 3.00 loaded.
 [    0.285262] usbcore: registered new interface driver usbfs
 [    0.285290] usbcore: registered new interface driver hub
 [    0.285339] usbcore: registered new device driver usb
 [    0.286212] i2c-sh_mobile e60b0000.i2c: I2C adapter 7, bus speed 400000 Hz
 [    0.286525] media: Linux media interface: v0.10
 [    0.286549] Linux video capture interface: v2.00
 [    0.286609] pps_core: LinuxPPS API ver. 1 registered
 [    0.286612] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
 [    0.286624] PTP clock support registered
 [    0.286857] EDAC MC: Ver: 3.0.0
 [    0.287021] dmi: Firmware registration failed.
 [    0.287822] Advanced Linux Sound Architecture Driver Initialized.
 [    0.288076] NetLabel: Initializing
 [    0.288082] NetLabel:  domain hash size = 128
 [    0.288085] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
 [    0.288122] NetLabel:  unlabeled traffic allowed by default
 [    0.288389] clocksource: Switched to clocksource arch_sys_counter
 [    0.288492] VFS: Disk quotas dquot_6.6.0
 [    0.288526] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
 [    0.288624] pnp: PnP ACPI: disabled
 [    0.292639] NET: Registered protocol family 2
 [    0.293103] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
 [    0.293323] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
 [    0.293600] TCP: Hash tables configured (established 32768 bind 32768)
 [    0.293720] UDP hash table entries: 2048 (order: 4, 65536 bytes)
 [    0.293786] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
 [    0.293945] NET: Registered protocol family 1
 [    0.294173] RPC: Registered named UNIX socket transport module.
 [    0.294179] RPC: Registered udp transport module.
 [    0.294182] RPC: Registered tcp transport module.
 [    0.294186] RPC: Registered tcp NFSv4.1 backchannel transport module.
 [    0.294194] PCI: CLS 0 bytes, default 128
 [    0.295066] hw perfevents: enabled with armv8_cortex_a57 PMU driver, 7 counters available
 [    0.295311] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
 [    0.295611] kvm [1]: 8-bit VMID
 [    0.296481] kvm [1]: vgic interrupt IRQ1
 [    0.296594] kvm [1]: Hyp mode initialized successfully
 [    0.298243] audit: initializing netlink subsys (disabled)
 [    0.298320] audit: type=2000 audit(0.291:1): state=initialized audit_enabled=0 res=1
 [    0.298579] workingset: timestamp_bits=44 max_order=20 bucket_order=0
 [    0.301676] squashfs: version 4.0 (2009/01/31) Phillip Lougher
 [    0.302008] NFS: Registering the id_resolver key type
 [    0.302027] Key type id_resolver registered
 [    0.302030] Key type id_legacy registered
 [    0.302039] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
 [    0.302153] 9p: Installing v9fs 9p2000 file system support
 [    0.303592] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
 [    0.303600] io scheduler noop registered
 [    0.303701] io scheduler cfq registered (default)
 [    0.303706] io scheduler mq-deadline registered
 [    0.303710] io scheduler kyber registered
 [    0.309980] gpio_rcar e6050000.gpio: driving 16 GPIOs
 [    0.310196] gpio_rcar e6051000.gpio: driving 28 GPIOs
 [    0.310399] gpio_rcar e6052000.gpio: driving 15 GPIOs
 [    0.310612] gpio_rcar e6053000.gpio: driving 16 GPIOs
 [    0.310813] gpio_rcar e6054000.gpio: driving 18 GPIOs
 [    0.311007] gpio_rcar e6055000.gpio: driving 26 GPIOs
 [    0.311208] gpio_rcar e6055400.gpio: driving 32 GPIOs
 [    0.311403] gpio_rcar e6055800.gpio: driving 4 GPIOs
 [    0.330185] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
 [    0.331737] SuperH (H)SCI(F) driver initialized
 [    0.332150] e6e88000.serial: ttySC0 at MMIO 0xe6e88000 (irq = 139, base_baud = 0) is a scif
 [    1.421607] console [ttySC0] enabled
 [    1.425906] msm_serial: driver initialized
 [    1.431015] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [    1.437635] [drm] No driver support for vblank timestamp query.
 [    1.444070] rcar-dw-hdmi fead0000.hdmi: Detected HDMI TX controller v2.01a with HDCP (DWC HDMI 2.0 TX PHY)
 [    1.453906] rcar-dw-hdmi fead0000.hdmi: registered DesignWare HDMI I2C bus driver
 [    1.467965] brd: module loaded
 [    1.475104] loop: module loaded
 [    1.490544] libphy: Fixed MDIO Bus: probed
 [    1.494893] tun: Universal TUN/TAP device driver, 1.6
 [    1.500977] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
 [    1.506814] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
 [    1.512762] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
 [    1.519722] igb: Copyright (c) 2007-2014 Intel Corporation.
 [    1.525314] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
 [    1.533142] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
 [    1.539375] sky2: driver version 1.30
 [    1.543779] ravb e6800000.ethernet: no valid MAC address supplied, using a random one
 [    1.551668] libphy: ravb_mii: probed
 [    1.556513] ravb e6800000.ethernet eth0: Base address at 0xe6800000, 16:20:6c:d7:26:9c, IRQ 136.
 [    1.565824] VFIO - User Level meta-driver version: 0.3
 [    1.572018] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
 [    1.578550] ehci-pci: EHCI PCI platform driver
 [    1.583016] ehci-platform: EHCI generic platform driver
 [    1.588514] ehci-platform ee0a0100.usb: EHCI Host Controller
 [    1.594186] ehci-platform ee0a0100.usb: new USB bus registered, assigned bus number 1
 [    1.602151] ehci-platform ee0a0100.usb: irq 146, io mem 0xee0a0100
 [    1.620397] ehci-platform ee0a0100.usb: USB 2.0 started, EHCI 1.10
 [    1.626919] hub 1-0:1.0: USB hub found
 [    1.630684] hub 1-0:1.0: 1 port detected
 [    1.634869] ehci-orion: EHCI orion driver
 [    1.639021] ehci-exynos: EHCI EXYNOS driver
 [    1.643290] ehci-msm: Qualcomm On-Chip EHCI Host Controller
 [    1.648938] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
 [    1.655131] ohci-pci: OHCI PCI platform driver
 [    1.659612] ohci-platform: OHCI generic platform driver
 [    1.665006] ohci-platform ee0a0000.usb: Generic Platform OHCI controller
 [    1.671716] ohci-platform ee0a0000.usb: new USB bus registered, assigned bus number 2
 [    1.679616] ohci-platform ee0a0000.usb: irq 146, io mem 0xee0a0000
 [    1.774650] hub 2-0:1.0: USB hub found
 [    1.778413] hub 2-0:1.0: 1 port detected
 [    1.782540] ohci-exynos: OHCI EXYNOS driver
 [    1.787219] usbcore: registered new interface driver usb-storage
 [    1.793280] usbcore: registered new interface driver usbserial
 [    1.799131] usbcore: registered new interface driver usbserial_generic
 [    1.805672] usbserial: USB Serial support registered for generic
 [    1.814089] i2c /dev entries driver
 [    1.824815] cs2000-cp 2-004f: revision - C1
 [    1.829065] i2c-rcar e6510000.i2c: probed
 [    1.837639] i2c-rcar e66d8000.i2c: probed
 [    1.842151] usbcore: registered new interface driver i2c-tiny-usb
 [    1.849517] renesas-cpg-mssr e6150000.clock-controller: Cannot get module clock 600: -2
 [    1.857531] rcar-fcp fea3f000.fcp: failed to add to PM domain always-on: -2
 [    1.864808] imr fe860000.imr0: IMR device (pdev: -1) registered as /dev/video0
 [    1.872241] imr fe870000.imr1: IMR device (pdev: -1) registered as /dev/video1
 [    1.879686] imr fe880000.imr2: IMR device (pdev: -1) registered as /dev/video2
 [    1.887103] imr fe890000.imr3: IMR device (pdev: -1) registered as /dev/video3
 [    1.896853] renesas-cpg-mssr e6150000.clock-controller: Cannot get module clock 620: -2
 [    1.904865] vsp1 fea38000.vsp: failed to add to PM domain always-on: -2
 [    1.912480] rcar_gen3_thermal e6198000.thermal: is using pseudo fixed FUSE values
 [    1.924605] rcar_gen3_thermal e6198000.thermal: TSC0: Loaded 1 trip points
 [    1.935724] rcar_gen3_thermal e6198000.thermal: TSC1: Loaded 1 trip points
 [    1.946786] rcar_gen3_thermal e6198000.thermal: TSC2: Loaded 3 trip points
 [    1.955932] sdhci: Secure Digital Host Controller Interface driver
 [    1.962119] sdhci: Copyright(c) Pierre Ossman
 [    1.966966] renesas_sdhi_internal_dmac ee100000.sd: Got CD GPIO
 [    1.973104] Synopsys Designware Multimedia Card Interface Driver
 [    1.979860] sdhci-pltfm: SDHCI platform and OF driver helper
 [    1.986901] ledtrig-cpu: registered to indicate activity on CPUs
 [    1.993872] usbcore: registered new interface driver usbhid
 [    1.999448] usbhid: USB HID core driver
 [    2.004160] optee: probing for conduit method from DT.
 [    2.009504] R-Car Rev.1.0.8
 [    2.012585] optee: initialized driver
 [    2.017494] usbcore: registered new interface driver snd-usb-audio
 [    2.032174] rcar_sound ec500000.sound: probed
 [    2.036828] NET: Registered protocol family 17
 [    2.041351] 9pnet: Installing 9P2000 support
 [    2.045664] Key type dns_resolver registered
 [    2.050389] registered taskstats version 1
 [    2.059274] thermal emergency: set temperature to 110 celsius
 [    2.065132] thermal emergency: shutdown target cpus 1-7
 [    2.070360] thermal emergency: freq scaled target cpus 0
 [    2.075951] renesas_irqc e61c0000.interrupt-controller: driving 6 irqs
 [    2.083667] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [    2.090288] [drm] No driver support for vblank timestamp query.
 [    2.097834] bd9571mwv 7-0030: Device: BD9571MWV rev. 4
 [    2.106501] renesas-cpg-mssr e6150000.clock-controller: Cannot get module clock 600: -2
 [    2.114514] rcar-fcp fea3f000.fcp: failed to add to PM domain always-on: -2
 [    2.121858] renesas-cpg-mssr e6150000.clock-controller: Cannot get module clock 620: -2
 [    2.129875] vsp1 fea38000.vsp: failed to add to PM domain always-on: -2
 [    2.138130] renesas_sdhi_internal_dmac ee100000.sd: Got CD GPIO
 [    2.204556] renesas_sdhi_internal_dmac ee100000.sd: mmc0 base at 0xee100000 max clock rate 200 MHz
 [    2.214922] asoc-simple-card sound: ak4613-hifi <-> ec500000.sound mapping ok
 [    2.222069] asoc-simple-card sound: ASoC: no DMI vendor name!
 [    2.230113] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [    2.236736] [drm] No driver support for vblank timestamp query.
 [    2.243646] renesas-cpg-mssr e6150000.clock-controller: Cannot get module clock 600: -2
 [    2.251676] rcar-fcp fea3f000.fcp: failed to add to PM domain always-on: -2
 [    2.259979] renesas-cpg-mssr e6150000.clock-controller: Cannot get module clock 620: -2
 [    2.269020] vsp1 fea38000.vsp: failed to add to PM domain always-on: -2
 [    2.277828] input: keyboard as /devices/platform/keyboard/input/input0
 [    2.285064] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [    2.288475] hctosys: unable to open rtc device (rtc0)
 [    2.288885] ALSA device list:
 [    2.288887]   #0: Loopback 1
 [    2.288888]   #1: ak4613
 [    2.302593] usb 2-1: new full-speed USB device number 2 using ohci-platform
 [    2.312156] [drm] No driver support for vblank timestamp query.
 [    2.313147] renesas-cpg-mssr e6150000.clock-controller: Cannot get module clock 600: -2
 [    2.313153] rcar-fcp fea3f000.fcp: failed to add to PM domain always-on: -2
 [    2.313413] renesas-cpg-mssr e6150000.clock-controller: Cannot get module clock 620: -2
 [    2.313416] vsp1 fea38000.vsp: failed to add to PM domain always-on: -2
 [    2.347893] Waiting 2 sec before mounting root device...
 [    2.557972] mmc0: new ultra high speed SDR104 SDHC card at address aaaa
 [    2.562026] input: ILITEK Multi-Touch-V3004 as /devices/platform/soc/ee0a0000.usb/usb2/2-1/2-1:1.0/0003:222A:0088.0001/input/input1
 [    2.562124] hid-multitouch 0003:222A:0088.0001: input: USB HID v1.10 Device [ILITEK Multi-Touch-V3004] on usb-ee0a0000.usb-1/input0
 [    2.562830] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [    2.562832] [drm] No driver support for vblank timestamp query.
 [    2.563731] renesas-cpg-mssr e6150000.clock-controller: Cannot get module clock 600: -2
 [    2.563738] rcar-fcp fea3f000.fcp: failed to add to PM domain always-on: -2
 [    2.563992] renesas-cpg-mssr e6150000.clock-controller: Cannot get module clock 620: -2
 [    2.563996] vsp1 fea38000.vsp: failed to add to PM domain always-on: -2
 [    2.568435] hid-generic 0003:222A:0088.0002: device has no listeners, quitting
 [    2.568966] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [    2.568967] [drm] No driver support for vblank timestamp query.
 [    2.569661] renesas-cpg-mssr e6150000.clock-controller: Cannot get module clock 600: -2
 [    2.569666] rcar-fcp fea3f000.fcp: failed to add to PM domain always-on: -2
 [    2.569910] renesas-cpg-mssr e6150000.clock-controller: Cannot get module clock 620: -2
 [    2.569913] vsp1 fea38000.vsp: failed to add to PM domain always-on: -2
 [    2.679926] mmcblk0: mmc0:aaaa SM32G 29.7 GiB
 [    2.686201]  mmcblk0: p1
 [    2.689480] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [    2.696097] [drm] No driver support for vblank timestamp query.
 [    2.702853] renesas-cpg-mssr e6150000.clock-controller: Cannot get module clock 600: -2
 [    2.710866] rcar-fcp fea3f000.fcp: failed to add to PM domain always-on: -2
 [    2.718094] renesas-cpg-mssr e6150000.clock-controller: Cannot get module clock 620: -2
 [    2.726101] vsp1 fea38000.vsp: failed to add to PM domain always-on: -2
 [    4.384422] md: Skipping autodetection of RAID arrays. (raid=autodetect will force)
 [    4.419655] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
 [    4.427773] VFS: Mounted root (ext4 filesystem) on device 179:1.
 [    4.434544] devtmpfs: mounted
 [    4.438086] Freeing unused kernel memory: 1152K
 [    4.819530] systemd[1]: Successfully loaded Smack policies.
 [    4.828363] systemd[1]: Successfully loaded Smack/CIPSO policies.
 [    4.835877] systemd[1]: System time before build time, advancing clock.
 [    4.875296] NET: Registered protocol family 10
 [    4.880426] Segment Routing with IPv6
 [    4.888486] systemd[1]: Relabelled /dev and /run in 2.512ms.
 [    4.933639] systemd[1]: systemd 234 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN default-hierarchy=hybrid)
 [    4.954674] systemd[1]: Detected architecture arm64.
 
 Welcome to Automotive Grade Linux 7.0.0+snapshot-20190409 (guppy)!
 
 [    4.977001] systemd[1]: Set hostname to <h3ulcb>.
 [    5.270305] systemd[1]: Reached target Swap.
 [  OK  ] Reached target Swap.
 [    5.288655] systemd[1]: Listening on Network Service Netlink Socket.
 [  OK  ] Listening on Network Service Netlink Socket.
 [    5.308544] systemd[1]: Listening on Journal Audit Socket.
 [  OK  ] Listening on Journal Audit Socket.
 [    5.328491] systemd[1]: Listening on udev Kernel Socket.
 [  OK  ] Listening on udev Kernel Socket.
 [    5.348533] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
 [  OK  ] Started Forward Password Requests to Wall Directory Watch.
 [    5.372541] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
 [  OK  ] Listening on /dev/initctl Compatibility Named Pipe.
 [    5.400431] systemd[1]: Listening on Process Core Dump Socket.
 [  OK  ] Listening on Process Core Dump Socket.
 [  OK  ] Started Dispatch Password Requests to Console Directory Watch.
 [  OK  ] Reached target Paths.
 [  OK  ] Listening on Journal Socket (/dev/log).
 [  OK  ] Listening on Journal Socket.
 [  OK  ] Reached target Remote File Systems.
 [  OK  ] Created slice User and Session Slice.
 [  OK  ] Listening on udev Control Socket.
 [  OK  ] Created slice System Slice.
 [  OK  ] Reached target Slices.
          Starting Load Kernel Modules...
 [  OK      5.565412] mostcore: loading out-of-tree module taints kernel.
 0m] Created slic[    5.573039] mostcore: init()
 e system-getty.slice.
 [    5.578681] aim_cdev: init()
 [    5.581895] mostcore: registered new application interfacing module cdev
 [    5.590559] mostcore: registered new application interfacing module networking
 [    5.599450] aim_sound: init()
 [    5.602471] mostcore: registered new application interfacing module sound
 [    5.611614] mostcore: registered new application interfacing module v4l
 [  OK  ] Created slice system-afm\x2duser\x2dsession.slice.
 [    5.627757] usbcore: registered new interface driver hdm_usb
 [    5.636541] rgnmm_drv mmngr: assigned reserved memory node linux,multimedia
 [  OK  ] Created slice system-serial\x2dgetty.slice.
          Mounting Kernel Debug File System...
          Starting Remount Root and Kernel File Systems...
 [    5.697788] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null)
          Mounting POSIX Message Queue File System...
 [  OK  ] Listening on Syslog Socket.
          Starting Journal Service...
 [    5.737606] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [    5.744239] [drm] No driver support for vblank timestamp query.
 [    5.751646] renesas-cpg-mssr e6150000.clock-controller: Cannot get module clock 600: -2
 [    5.759717] rcar-fcp fea3f000.fcp: failed to add to PM domain always-on: -2
 [    5.767561] renesas-cpg-mssr e6150000.clock-controller: Cannot get module clock 620: -2
 [    5.775582] vsp1 fea38000.vsp: failed to add to PM domain always-on: -2
 [    5.783176] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [    5.789825] [drm] No driver support for vblank timestamp query.
 [    5.791274] renesas-cpg-mssr e6150000.clock-controller: Cannot get module clock 600: -2
 [    5.791282] rcar-fcp fea3f000.fcp: failed to add to PM domain always-on: -2
          Starting Create list of required st…ce nodes for the current kernel...
          Starting Setup Virtual Console...
          Mounting Temporary Directory (/tmp)...
          Mounting Huge Pages File System...
 [  OK  ] Mounted Kernel Debug File System.
 [  OK  ] Mounted POSIX Message Queue File System.
 [    5.903129] pvrsrvkm fd000000.gsx: opp[1/4]: (200000000 Hz, 830000 uV)
 [    5.909701] pvrsrvkm fd000000.gsx: opp[2/4]: (300000000 Hz, 830000 uV)
 [    5.916277] pvrsrvkm fd000000.gsx: opp[3/4]: (400000000 Hz, 830000 uV)
 [    5.922851] pvrsrvkm fd000000.gsx: opp[4/4]: (600000000 Hz, 830000 uV)
 [    5.930165] [drm] Initialized pvr 1.9.4991288 20110701 for fd000000.gsx on minor 0
 [    5.938515] renesas-cpg-mssr e6150000.clock-controller: Cannot get module clock 620: -2
 [    5.946541] vsp1 fea38000.vsp: failed to add to PM domain always-on: -2
 [  OK      5.953880] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 0m] Mounted Huge[    5.961589] [drm] No driver support for vblank timestamp query.
  Pages File System.
 [    5.969902] renesas-cpg-mssr e6150000.clock-controller: Cannot get module clock 600: -2
 [    5.978717] rcar-fcp fea3f000.fcp: failed to add to PM domain always-on: -2
 [  OK  ] Mounted Temporary Directory (/tmp).
 [    6.001392] AVIRT: core: Alsa Virtual Sound Driver avirt-0.0.1
 [    6.008368] renesas-cpg-mssr e6150000.clock-controller: Cannot get module clock 620: -2
 [    6.013705] AVIRT: core: Registered new Audio Path: Loopback Audio Path
 [    6.023021] vsp1 fea38000.vsp: failed to add to PM domain always-on: -2
 [    6.030490] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [    6.031089] renesas-cpg-mssr e6150000.clock-controller: Cannot get module clock 617: -2
 [    6.031095] uvcs fe8df000.vcp4: failed to add to PM domain a3vc: -2
 [    6.031127] renesas-cpg-mssr e6150000.clock-controller: Cannot get module clock 616: -2
 [    6.031131] uvcs fe8ff000.vcp4: failed to add to PM domain a3vc: -2
 [    6.065800] [drm] No driver support for vblank timestamp query.
 [    6.066949] renesas-cpg-mssr e6150000.clock-controller: Cannot get module clock 600: -2
 [    6.066955] rcar-fcp fea3f000.fcp: failed to add to PM domain always-on: -2
 [    6.067239] renesas-cpg-mssr e6150000.clock-controller: Cannot get module clock 620: -2
 [    6.067242] vsp1 fea38000.vsp: failed to add to PM domain always-on: -2
 [    6.068363] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [    6.068364] [drm] No driver support for vblank timestamp query.
 [  OK  ] Started Journal Service.
 [  OK  ] Started Remount Root and Kernel File Systems.
 [  OK  ] Started Create list [    6.148424] renesas-cpg-mssr e6150000.clock-controller: Cannot get module clock 600: -2
 of required sta瞼    6.157470] rcar-fcp fea3f000.fcp: failed to add to PM domain always-on: -2
 ・ice nodes for[    6.157714] renesas-cpg-mssr e6150000.clock-controller: Cannot get module clock 629: -2
  the current ker[    6.157719] vspm-vsp fe9c0000.vspm: failed to add to PM domain a3vp: -2
 nel.
 [    6.158107] renesas-cpg-mssr e6150000.clock-controller: Cannot get module clock 117: -2
 [    6.158111] vspm-fdp fe948000.fdpm: failed to add to PM domain a3vp: -2
 [    6.199034] renesas-cpg-mssr e6150000.clock-controller: Cannot get module clock 620: -2
 [    6.207050] vsp1 fea38000.vsp: failed to add to PM domain always-on: -2
 [    6.214396] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [    6.221021] [drm] No driver support for vblank timestamp query.
 [    6.227880] renesas-cpg-mssr e6150000.clock-controller: Cannot get module clock 629: -2
 [    6.235904] vspm-vsp fe9c0000.vspm: failed to add to PM domain a3vp: -2
 [  OK      6.243182] renesas-cpg-mssr e6150000.clock-controller: Cannot get module clock 117: -2
 0m] Started Setu[    6.251977] vspm-fdp fe948000.fdpm: failed to add to PM domain a3vp: -2
 p Virtual Consol[    6.260291] renesas-cpg-mssr e6150000.clock-controller: Cannot get module clock 600: -2
 e.
 [    6.269367] rcar-fcp fea3f000.fcp: failed to add to PM domain always-on: -2
          Starting udev Coldplug all Devices...
 [    6.294904] renesas-cpg-mssr e6150000.clock-controller: Cannot get module clock 620: -2
 [    6.302951] vsp1 fea38000.vsp: failed to add to PM domain always-on: -2
          Starting Create Static D[    6.311183] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 evice Nodes in /[    6.319270] [drm] No driver support for vblank timestamp query.
 dev...
 [    6.327985] renesas-cpg-mssr e6150000.clock-controller: Cannot get module clock 629: -2
 [    6.336024] vspm-vsp fe9c0000.vspm: failed to add to PM domain a3vp: -2
 [    6.343466] renesas-cpg-mssr e6150000.clock-controller: Cannot get module clock 117: -2
 [    6.351503] vspm-fdp fe948000.fdpm: failed to add to PM domain a3vp: -2
 [    6.358828] renesas-cpg-mssr e6150000.clock-controller: Cannot get module clock 600: -2
 [    6.366858] rcar-fcp fea3f000.fcp: failed to add to PM domain always-on: -2
 [    6.374520] renesas-cpg-mssr e6150000.clock-controller: Cannot get module clock 620: -2
 [    6.382563] vsp1 fea38000.vsp: failed to add to PM domain always-on: -2
 [    6.383676] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [    6.383678] [drm] No driver support for vblank timestamp query.
 [    6.384988] renesas-cpg-mssr e6150000.clock-controller: Cannot get module clock 629: -2
 [    6.384995] vspm-vsp fe9c0000.vspm: failed to add to PM domain a3vp: -2
 [    6.385359] renesas-cpg-mssr e6150000.clock-controller: Cannot get module clock 117: -2
 [    6.385364] vspm-fdp fe948000.fdpm: failed to add to PM domain a3vp: -2
 [    6.385631] renesas-cpg-mssr e6150000.clock-controller: Cannot get module clock 600: -2
 [    6.385635] rcar-fcp fea3f000.fcp: failed to add to PM domain always-on: -2
 [    6.385928] renesas-cpg-mssr e6150000.clock-controller: Cannot get module clock 620: -2
 [    6.385931] vsp1 fea38000.vsp: failed to add to PM domain always-on: -2
          Starting Flush Journal to Persistent Storage...
 [FAILED] Failed to start Load Kernel Modules.
 See 'systemctl status systemd-modules-load.service' for details.
 [DEPEND] Dependency failed for Driver configuration for Unicens2.
 [  OK  ] Started Create Static Device Nodes in /dev.
 [  OK  ] Reached target Local File Systems (Pre).
          Mounting /var/volatile...
          Starting udev Kernel Device Manager...
          Mounting Kernel Configuration File System...
          Starting Apply Kernel Variables...
 [  OK  ] Mounted Kernel Configuration File System.
 [  OK  ] Mounted /var/volatile.
 [    6.671222] systemd-journald[1983]: Received request to flush runtime journal from PID 1
          Starting Load/Save Random Seed...
 [  OK  ] Reached target Local File Systems.
 [  OK  ] Started Flush Journal to Persistent Storage.
 [  OK  ] Started udev Coldplug all Devices.
 [  OK  ] Started Apply Kernel Variables.
 [  OK  ] Started Load/Save Random Seed.
 [  OK  ] Started udev Kernel Device Manager.
 [  OK  ] Found device /dev/ttySC0.
          Starting Setup Virtual Console...
          Starting Load Kernel Modules...
 [    7.222742] renesas-cpg-mssr e6150000.clock-controller: Cannot get module clock 617: -2
 [    7.231662] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [    7.231665] [drm] No driver support for vblank timestamp query.
 [    7.244962] uvcs fe8df000.vcp4: failed to add to PM domain a3vc: -2
 [    7.244976] renesas-cpg-mssr e6150000.clock-controller: Cannot get module clock 629: -2
 [    7.244981] vspm-vsp fe9c0000.vspm: failed to add to PM domain a3vp: -2
 [    7.245765] renesas-cpg-mssr e6150000.clock-controller: Cannot get module clock 117: -2
 [    7.245769] vspm-fdp fe948000.fdpm: failed to add to PM domain a3vp: -2
 [    7.246057] renesas-cpg-mssr e6150000.clock-controller: Cannot get module clock 600: -2
 [    7.246061] rcar-fcp fea3f000.fcp: failed to add to PM domain always-on: -2
 [    7.246341] renesas-cpg-mssr e6150000.clock-controller: Cannot get module clock 620: -2
 [    7.246345] vsp1 fea38000.vsp: failed to add to PM domain always-on: -2
 [    7.310250] renesas-cpg-mssr e6150000.clock-controller: Cannot get module clock 616: -2
 [    7.318275] uvcs fe8ff000.vcp4: failed to add to PM domain a3vc: -2
          Starting Create Volatile Files and Directories...
 [  OK  ] Started Setup Virtual Console.
 [FAILED] Failed to start Load Kernel Modules.
 See 'systemctl status systemd-modules-load.service' for details.
 [    7.438340] random: crng init done
          Starting Load Kernel Modules...
 [    7.457284] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [    7.457454] renesas-cpg-mssr e6150000.clock-controller: Cannot get module clock 617: -2
 [    7.457462] uvcs fe8df000.vcp4: failed to add to PM domain a3vc: -2
 [    7.457498] renesas-cpg-mssr e6150000.clock-controller: Cannot get module clock 616: -2
 [    7.457502] uvcs fe8ff000.vcp4: failed to add to PM domain a3vc: -2
 [    7.492658] [drm] No driver support for vblank timestamp query.
 [    7.494214] renesas-cpg-mssr e6150000.clock-controller: Cannot get module clock 629: -2
 [    7.494222] vspm-vsp fe9c0000.vspm: failed to add to PM domain a3vp: -2
 [    7.494741] renesas-cpg-mssr e6150000.clock-controller: Cannot get module clock 117: -2
 [    7.494746] vspm-fdp fe948000.fdpm: failed to add to PM domain a3vp: -2
 [    7.495060] renesas-cpg-mssr e6150000.clock-controller: Cannot get module clock 600: -2
 [    7.495065] rcar-fcp fea3f000.fcp: failed to add to PM domain always-on: -2
 [    7.495451] renesas-cpg-mssr e6150000.clock-controller: Cannot get module clock 620: -2
 [    7.495456] vsp1 fea38000.vsp: failed to add to PM domain always-on: -2
 [    7.497747] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
 [    7.497749] [drm] No driver support for vblank timestamp query.
          Starting Setup Virtual Console...
 [  OK  ] Started Create Volatile Files and Directories.
 [FAILED] Failed to start Load Kernel Modules.
 See 'systemctl status systemd-modules-load.service' for details.
 [  OK  ] Started Setup Virtual Console.
          Starting Start Psplash Boot Screen...
          Starting Update UTMP about System Boot/Shutdown...
 [  OK  ] Started Start Psplash Boot Screen.
 [  OK  ] Started Update UTMP about System Boot/Shutdown.
 [  OK  ] Reached target System Initialization.
 [  OK  ] Listening on GPS (Global Positioning System) Daemon Sockets.
 [  OK  ] Listening on D-Bus System Message Bus Socket.
          Starting sshd.socket.
 [  OK  ] Started Daily Cleanup of Temporary Directories.
          Starting cynara-monitor-get.socket.
 [  OK  ] Started dnf makecache timer.
 [  OK  ] Started dnf-automatic-download timer.
 [  OK  ] Listening on security-manager.socket.
 [  OK  ] Listening on cynara.socket.
 [  OK  ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
 [  OK  ] Listening on cynara-admin.socket.
          Starting cynara-agent.socket.
          Starting Network Service...
 [  OK  ] Started dnf-automatic-install timer.
 [  OK  ] Listening on afm-system-daemon.socket.
 [  OK  ] Started dnf-automatic-notifyonly timer.
 [  OK  ] Reached target Timers.
 [  OK  ] Listening on sshd.socket.
 [  OK  ] Listening on cynara-monitor-get.socket.
 [  OK  ] Listening on cynara-agent.socket.
 [  OK  ] Reached target cynara sockets.
 [  OK  ] Reached target Sockets.
 [  OK  ] Reached target Basic System.
          Starting Terminate Psplash Boot Screen...
          Starting Save/Restore Sound Card State...
          Starting User Mode Init Manager for TI shared transport...
 [  OK  ] Started D-Bus System Message Bus.
 [    8.282253] Bluetooth: Core ver 2.22
 [    8.285923] NET: Registered protocol family 31
 [    8.290386] Bluetooth: HCI device and connection manager initialized
 [    8.296758] Bluetooth: HCI socket layer initialized
 [    8.301650] Bluetooth: L2CAP socket layer initialized
 [    8.306726] Bluetooth: SCO socket layer initialized
          Starting Connection service...
          Starting Cynara service...
 [  OK  ] Started Hardware RNG Entropy Gatherer Daemon.
          Starting PowerVR consumer services...
          Starting neard service...
          Starting Avahi mDNS/DNS-SD Stack...
 [  OK  ] Reached target Containers.
          Starting Login Service...
          Starting Initiate afm-system-setup...
          Starting Telephony service...
 [  OK  ] Started System Logging Service.
 [  OK  ] Started Kernel Logging Service.
          Starting Start the security manager...
          Starting Disk Manager (legacy version)...
 [  OK  ] Started Network Service.
 [FAILED] Failed to start Terminate Psplash Boot Screen.
 See 'systemctl status psplash-quit.service' for details.
 [  OK  ] Started Save/Restore Sound Card State.
 [  OK  ] Started User Mode Init Manager for TI shared transport.
 [  OK  ] Started PowerVR consumer services.
 [  OK  ] Started Cynara service.
 [    9.028788] nfc: nfc_init: NFC Core ver 0.1
 [    9.033101] NET: Registered protocol family 39
 [  OK  ] Started neard service.
 [  OK  ] Started Initiate afm-system-setup.
 [  OK  ] Started Telephony service.
 [  OK  ] Started Login Service.
 [  OK  ] Started Avahi mDNS/DNS-SD Stack.
 [  OK  ] Started Application Framework Supervisor.
 [  OK  ] Started Application Framework Master, system side.
 [  OK  ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
          Starting Bluetooth service...
 [  OK  ] Reached target Sound Card.
 [  OK  ] Started Start the security manager.
 [  OK  ] Started Connection service.
 [  OK  ] Reached target Network.
          Starting Target Communication Framework agent...
          Starting Berkeley Internet Name Domain (DNS)...
          Starting Permit User Sessions...
 [  OK  ] Started Disk Manager (legacy version).
 [  OK  ] Started Automount Disk Manager.
 [  OK  ] Started Permit User Sessions.
          Starting Hostname Service...
 [  OK  ] Started Serial Getty on ttySC0.
 [  OK  ] Reached target Login Prompts.
 [  OK  ] Started Initiate afm[    9.771720] Micrel KSZ9031 Gigabit PHY e6800000.ethernet-ffffffff:00: attached PHY driver [Micrel KSZ9031 Gigabit PHY] (mii_bus:phy_addr=e6800000.ethernet-ffffffff:00, irq=184)
 -user-session 0.
 [    9.789428] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
          Starting WPA supplicant...
 [  OK  ] Started Bluetooth service.
 [  OK  ] Started Bluetooth Audio ALSA Backend.
          Starting Authorization Manager...
 [    9.964662] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
 [    9.969995] Bluetooth: BNEP filters: protocol multicast
 [    9.975257] Bluetooth: BNEP socket layer initialized
 [  OK  ] Started Target Communication Framework agent.
 [  OK  ] Started Hostname Service.
 [  OK  ] Started WPA supplicant.
 [   10.374665] audit: type=1006 audit(1554702896.535:2): pid=3745 uid=0 subj=System old-auid=4294967295 auid=0 tty=(none) old-ses=4294967295 ses=1 res=1
 [  OK  ] Created slice User Slice of root.
          Starting User Manager for UID 0...
 [   10.441290] audit: type=1006 audit(1554702896.603:3): pid=3776 uid=0 subj=System old-auid=4294967295 auid=0 tty=(none) old-ses=4294967295 ses=2 res=1
 [  OK  ] Started Session 1 of user root.
 [   10.492970] audit: type=1400 audit(1554702896.655:4): lsm=SMACK fn=smack_inode_permission action=denied subject="System" object="_" requested=w pid=3762 comm="named" name="bind" dev="mmcblk0p1" ino=30115
 [   10.511216] audit: type=1300 audit(1554702896.655:4): arch=c00000b7 syscall=48 success=no exit=-13 a0=ffffffffffffff9c a1=aaaaaec33698 a2=2 a3=aaaaaec33698 items=0 ppid=3739 pid=3762 auid=4294967295 uid=987 gid=987 euid=987 suid=987 fsuid=987 egid=987 sgid=987 fsgid=987 tty=(none) ses=4294967295 comm="named" exe="/usr/sbin/named" subj=System key=(null)
 [   10.544424] audit: type=1327 audit(1554702896.655:4): proctitle=2F7573722F7362696E2F6E616D6564002D750062696E64
 [  OK  ] Started Authorization Manager.
 [  OK  ] Started Berkeley Internet Name Domain (DNS).
 [  OK  ] Reached target Host and Network Name Lookups.
 [  OK  ] Reached target Multi-User System.
          Starting Weston Wayland compositor...
          Starting Update UTMP about System Runlevel Changes...
 [  OK  ] Started Update UTMP about System Runlevel Changes.
 [  OK  ] Started Weston Wayland compositor.
 [  OK  ] Started User Manager for UID 0.
 [   11.958499] can: controller area network core (rev 20170425 abi 9)
 [   11.964822] NET: Registered protocol family 29
 [   12.148666] can: broadcast manager protocol (rev 20170425 t)
 
 Automotive Grade Linux 7.0.0+snapshot h3ulcb ttySC0
 
 h3ulcb login: root
 h3ulcb:~#
21:03, 11 April 2019

Hello.

Is the penguin and AGL logo displayed on the monitor during startup?

00:24, 15 April 2019

Hello,

Thank you very much for your reply.

No, there is nothing displayed on the monitor during startup and even after Linux login prompt is shown on serial console which is running on other PC. The monitor says that no signal input.

00:51, 15 April 2019

Hi OK, please paste the result of the "printenv" command.

18:46, 15 April 2019

Hello,

Here is the results of printenv command.

 baudrate=115200
 bootargs=console=ttySC0,115200 ignore_loglevel vmalloc=384M video=HDMI-A-1:1920x1080-32@60 root=/dev/mmcblk0p1 rw rootfstype=ext4 rootwait rootdelay=2
 bootcmd=run load_ker; run load_dtb; booti 0x48080000 - 0x48000000
 bootdelay=3
 fdt_high=0xffffffffffffffff
 filesize=12a7200
 initrd_high=0xffffffffffffffff
 load_dtb=ext4load mmc 0:1 0x48000000 /boot/r8a7795-es1-h3ulcb.dtb
 load_ker=ext4load mmc 0:1 0x48080000 /boot/Image
 stderr=serial
 stdin=serial
 stdout=serial
 ver=U-Boot 2015.04 (Apr 08 2019 - 09:51:12)
 
 Environment size: 547/131068 bytes
20:35, 15 April 2019

> load_dtb=ext4load mmc 0:1 0x48000000 /boot/r8a7795-es1-h3ulcb.dtb

This device tree is for the H3 v1.1 SK(RTP0RC7795SKBX0010SA00).

> [ 0.005726] NOTICE: BL2: PRR is R-Car H3 Ver.2.0

According to the above log you are using H3 v2.0 SK.

Please use the "r8a7795-h3ulcb.dtb".

21:40, 15 April 2019