AGL7.0 Home screen NOT displayed
← Thread:Talk:R-Car/Boards/Yocto-Gen3/AGL7.0 Home screen NOT displayed/reply (2)
Thank you very much for your reply.
No, there is nothing displayed on the monitor during startup and even after Linux login prompt is shown on serial console which is running on other PC. The monitor says that no signal input.
You do not have permission to edit this page, for the following reasons:
- The action you have requested is limited to users in the group: Users.
- You must confirm your email address before editing pages. Please set and validate your email address through your user preferences.
You can view and copy the source of this page.
Here is the results of printenv command.
baudrate=115200 bootargs=console=ttySC0,115200 ignore_loglevel vmalloc=384M video=HDMI-A-1:1920x1080-32@60 root=/dev/mmcblk0p1 rw rootfstype=ext4 rootwait rootdelay=2 bootcmd=run load_ker; run load_dtb; booti 0x48080000 - 0x48000000 bootdelay=3 fdt_high=0xffffffffffffffff filesize=12a7200 initrd_high=0xffffffffffffffff load_dtb=ext4load mmc 0:1 0x48000000 /boot/r8a7795-es1-h3ulcb.dtb load_ker=ext4load mmc 0:1 0x48080000 /boot/Image stderr=serial stdin=serial stdout=serial ver=U-Boot 2015.04 (Apr 08 2019 - 09:51:12) Environment size: 547/131068 bytes
> load_dtb=ext4load mmc 0:1 0x48000000 /boot/r8a7795-es1-h3ulcb.dtb
This device tree is for the H3 v1.1 SK(RTP0RC7795SKBX0010SA00).
> [ 0.005726] NOTICE: BL2: PRR is R-Car H3 Ver.2.0
According to the above log you are using H3 v2.0 SK.
Please use the "r8a7795-h3ulcb.dtb".