Build for Yocto Gen3 not completing.

Jump to: navigation, search

I started developing the Yocto Gen3 for the Renesas M3SK. I followed the guide at the link: http://elinux.org/R-Car/Boards/Yocto-Gen3

I was able to complete till step 11 in the 'Building the BSP for Renesas H3ULCB, M3ULCB section'. During the bitbake process I got an error as follows.

NOTE: Sending SIGTERM to runqemu WARNING: Qemu ended unexpectedly, dump data from host is in /tmp/oe-saved-tests/201706200953_qemu DEBUG: Python function do_testimage_auto finished ERROR: Function failed: do_testimage_auto ERROR: Task 10 (/home/pisquare-dev/Yocto/build/build/../poky/meta/recipes-graphics/images/core-image-weston.bb, do_testimage_auto) failed with exit code '1' NOTE: Tasks Summary: Attempted 5155 tasks of which 5154 didn't need to be rerun and 1 failed. No currently running tasks (5154 of 5156)

Summary: 1 task failed: 

 /home/pisquare-dev/Yocto/build/build/../poky/meta/recipes-graphics/images/core-image-weston.bb, do_testimage_auto


Please help me with this issue.

Smodak (talk)

‎09:16, 20 June 2017

Seems that you enabled TEST_IMAGE option in your local.conf:

Please comment it back:

  1. TEST_IMAGE = "1"

In case you need to use it then you need properly setup QEMU on your host machine.

Cogente (talk)

‎03:45, 21 June 2017

You do not have permission to edit this page, for the following reasons:

  • The action you have requested is limited to users in the group: Users.
  • You must confirm your email address before editing pages. Please set and validate your email address through your user preferences.

You can view and copy the source of this page.

Return to Thread:Talk:R-Car/Boards/Yocto-Gen3/Build for Yocto Gen3 not completing./reply (2).

 
 
Retrieved from "https://elinux.org/Thread:Talk:R-Car/Boards/Yocto-Gen3/Build_for_Yocto_Gen3_not_completing.#Build_for_Yocto_Gen3_not_completing._3141"