Currently, two CA57s are running in StarterKitPro. Could you tell me how to boot with six cores total of two CA57s and four CA53s?
To try it here, CA57CA53BOOT = "1" was added to local.conf.
root@m3ulcb:~# cat /proc/cpuinfo processor : 0 BogoMIPS : 16.66 Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 CPU implementer : 0x41 CPU architecture: 8 CPU variant : 0x1 CPU part : 0xd07 CPU revision : 3 processor : 1 BogoMIPS : 16.66 Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 CPU implementer : 0x41 CPU architecture: 8 CPU variant : 0x1 CPU part : 0xd07 CPU revision : 3
This is quoted from the AGL mailing list.
[agl-discussions] A53 CPU on renesas board? 2017/05/10 (水) 18:01
> Out of curiosity, A53 cores on R-Car board (in additoin to A57 cores) could also be enabled for AGL system easily (for accelaration), or rather to be used to host different OSs? > Hello, In order to enable the A53 CPU's on the r-car boards, you need to add this line in meta-rcar/meta-rcar-gen3/recipes-bsp/arm-trusted-firmware/arm-trusted-firmware_git.bb: export PSCI_DISABLE_BIGLITTLE_IN_CA57BOOT="0" and rebuild and reflash the firmware as explained in http://elinux.org/R-Car/Boards/M3SK.
Is this useful for you?
You do not have permission to edit this page, for the following reasons:
- The action you have requested is limited to users in the group: Users.
- You must confirm your email address before editing pages. Please set and validate your email address through your user preferences.
You can view and copy the source of this page.