Thread history

From Talk:R-Car/Boards/Yocto-Gen3
Viewing a history listing
Jump to: navigation, search
Time User Activity Comment
00:55, 16 May 2017 Ryuohno (talk | contribs)

New thread created

 
01:02, 16 May 2017 Ryuohno (talk | contribs)

Comment text edited

 
01:16, 16 May 2017 Ryuohno (talk | contribs)

Comment text edited

 
02:27, 16 May 2017 Ryuohno (talk | contribs)

Comment text edited

 
04:52, 16 May 2017 Ryuohno (talk | contribs)

Comment text edited

 
23:25, 17 May 2017 Ygohda (talk | contribs)

New reply created

(Reply to CA57CA53BOOT)
17:56, 21 May 2017 Ryuohno (talk | contribs)

New reply created

(Reply to CA57CA53BOOT)

Currently, two CA57s are running in StarterKitPro. Could you tell me how to boot with six cores total of two CA57s and four CA53s?

To try it here, CA57CA53BOOT = "1" was added to local.conf.

root@m3ulcb:~# cat /proc/cpuinfo
processor       : 0
BogoMIPS        : 16.66
Features        : fp asimd evtstrm aes pmull sha1 sha2 crc32
CPU implementer : 0x41
CPU architecture: 8
CPU variant     : 0x1
CPU part        : 0xd07
CPU revision    : 3

processor       : 1
BogoMIPS        : 16.66
Features        : fp asimd evtstrm aes pmull sha1 sha2 crc32
CPU implementer : 0x41
CPU architecture: 8
CPU variant     : 0x1
CPU part        : 0xd07
CPU revision    : 3
00:55, 16 May 2017

Hi

This is quoted from the AGL mailing list.

[agl-discussions] A53 CPU on renesas board? 2017/05/10 (水) 18:01

> Out of curiosity, A53 cores on R-Car board (in additoin to A57 cores) could also be enabled for AGL system easily (for accelaration), or rather to be used to host different OSs?
>
Hello,
In order to enable the A53 CPU's on the r-car boards, you need to add this line in
meta-rcar/meta-rcar-gen3/recipes-bsp/arm-trusted-firmware/arm-trusted-firmware_git.bb:
export PSCI_DISABLE_BIGLITTLE_IN_CA57BOOT="0"
and rebuild and reflash the firmware as explained in http://elinux.org/R-Car/Boards/M3SK.

Is this useful for you?

23:25, 17 May 2017

Thank you very much.
I solved it.

17:56, 21 May 2017