Enabling Reset button/Power button functionality on Kingfisher + M3 Starter Kit

Jump to: navigation, search
Revision as of 12 July 2018 at 02:34.
The highlighted comment was edited in this revision. [diff]

Reset button (SW8) and Power button (SW9) do not work when M3 starter Kit connected to Kingfisher board.

We need this in order to evaluate fastboot feature with Camera connected to Kingfisher.

Any workaround?

Note: SW8 and SW9 work fine without connecting Kingfisher board to M3 starter Kit.

[Use Case]

1. Connect M3 starter Kit to Kingfisher Advanced Model board.

2. Boot up the board.

3. Press SW9 for resetting the board, without physical power disconnection. (Volatile memory should be maintained.)

OR

1. Connect M3 starter Kit to Kingfisher Advanced Model board.

2. Boot up the board.

3. Software suspend the board. Press SW8 in order to power on the board, without physical power disconnection. (Volatile memory should be maintained.)

[Board and other env.]

Renesas RCAR M3 Starter Kit

Sample Loader V3.02 2017.07.04 (M3 Starter Kit)

MiniMonitor V3.02 2017.07.04 (M3 Starter Kit)

Kingfisher Board Version (SBEV-RCAR-KF-M05)


Thanks,

WN

    Wnatsume (talk)

    ‎19:32, 11 July 2018
    Retrieved from "https://elinux.org/Thread:Talk:R-Car/Boards/Yocto-Gen3/Enabling_Reset_button/Power_button_functionality_on_Kingfisher_%2B_M3_Starter_Kit"