Enabling Reset button/Power button functionality on Kingfisher + M3 Starter Kit

Reset button (SW8) and Power button (SW9) do not work when M3 starter Kit connected to Kingfisher board.

We need this in order to evaluate fastboot feature with Camera connected to Kingfisher.

Any workaround?

Note: SW8 and SW9 work fine without connecting Kingfisher board to M3 starter Kit.

[Use Case]

1. Connect M3 starter Kit to Kingfisher Advanced Model board.

2. Boot up the board.

3. Press SW9 for resetting the board, without physical power disconnection. (Volatile memory should be maintained.)

OR

1. Connect M3 starter Kit to Kingfisher Advanced Model board.

2. Boot up the board.

3. Software suspend the board. Press SW8 in order to power on the board, without physical power disconnection. (Volatile memory should be maintained.)

[Board and other env.]

Renesas RCAR M3 Starter Kit

Sample Loader V3.02 2017.07.04 (M3 Starter Kit)

MiniMonitor V3.02 2017.07.04 (M3 Starter Kit)

Kingfisher Board Version (SBEV-RCAR-KF-M05)

Thanks,

WN

Wnatsume (talk)

According to the schematic the power supply seems to be controlled from Kingfisher(M05). I think you can not control power from SW8.

Ygohda (talk)

Is there any switch/workaround to reset the kingfisher board ? Or would this be considered as a hardware limitation and no work around possible ? Although we would hope this is not the case.

Chetan (talk)