Enabling Reset button/Power button functionality on Kingfisher + M3 Starter Kit

Jump to: navigation, search

Is there any switch/workaround to reset the kingfisher board ? Or would this be considered as a hardware limitation and no work around possible ? Although we would hope this is not the case.

Chetan (talk)

‎19:06, 23 July 2018

SW9 on Starter Kit can reset to CPU( and devices on Starter Kit). However it cannot reset to devices on Kingfisher.

Why do you need reset rather than SW6 on Kingfisher?

Ygohda (talk)

‎22:42, 26 July 2018

You do not have permission to edit this page, for the following reasons:

  • The action you have requested is limited to users in the group: Users.
  • You must confirm your email address before editing pages. Please set and validate your email address through your user preferences.

You can view and copy the source of this page.

Return to Thread:Talk:R-Car/Boards/Yocto-Gen3/Enabling Reset button/Power button functionality on Kingfisher + M3 Starter Kit/reply (4).

KF doesn't support Suspend to RAM(S2R).

In order to support S2R on SK+KF, it is necessary to redesign the power control schematics on KF.
(I have never heard of such a plan.)

Ygohda (talk)

‎19:32, 31 July 2018

We understood no support considered for S2R so far. Thanks, Gohda-san, Chetan-san.

WN

Wnatsume (talk)‎05:34, 9 August 2018
 
 
 
 
Retrieved from "https://elinux.org/Thread:Talk:R-Car/Boards/Yocto-Gen3/Enabling_Reset_button/Power_button_functionality_on_Kingfisher_%2B_M3_Starter_Kit/reply_(2)#Enabling_Reset_button.2FPower_button_functionality_on_Kingfisher_.2B_M3_Starter_Kit_3676"