Thread history
| Time | User | Activity | Comment |
|---|---|---|---|
| No results | |||
I've attached the my log.
H3 SAMPLE LOADER V1.16 2016.10.24
CPU : AArch64 CA57
DRAM : LPDDR4 DDR3200 DEVICE: QSPI Flash(S25FS128) at 40MHz DMA
BOOT : Normal Boot
Backup: DDR Cold Boot
jump to 0xE6330000
H3 MiniMonitor V0.23 2016.10.24
Work Memory SystemRAM (H'E6328000-H'E632FFFF)
>
>
>xls2
===== Qspi/HyperFlash writing of Gen3 Board Command =============
Load Program to Spiflash
Writes to any of SPI address.
Please select,FlashMemory.
1 : QspiFlash (U5 : S25FS128S)
2 : QspiFlash Board (CN2: S25FL512S)
3 : HyperFlash (SiP internal)
Select (1-3)>3
READ ID OK.
Program Top Address & Qspi/HyperFlash Save Address
===== Please Input Program Top Address ============
Please Input : H'e6304000
===== Please Input Qspi/HyperFlash Save Address ===
Please Input : H'40000
Work RAM(H'50000000-H'53FFFFFF) Clear....
please send ! ('.' & CR stop load)
H'00040000-0007FFFF Erasing..Erase Completed
SAVE SPI-FLASH....... complete!
======= Qspi/HyperFlash Save Information =================
SpiFlashMemory Stat Address : H'00040000
SpiFlashMemory End Address : H'0005B03B
===========================================================
>
If you don't solve it please attach your log.
Issue is not yet resolved, please see log below.
H3 SAMPLE LOADER V1.17 2016.11.08
CPU : AArch64 CA57 DRAM : LPDDR4 DDR3200 DEVICE: QSPI Flash(S25FS128) at 40MHz DMA BOOT : Normal Boot Backup: DDR Cold Boot
jump to 0xE6330000
H3 MiniMonitor V0.24 2016.11.08
Work Memory SystemRAM (H'E6328000-H'E632FFFF)
>xls2
Contents
Qspi/HyperFlash writing of Gen3 Board Command ========[edit]
Load Program to Spiflash Writes to any of SPI address. Please select,FlashMemory.
1 : QspiFlash (U5 : S25FS128S) 2 : QspiFlash Board (CN2: S25FL512S) 3 : HyperFlash (SiP internal) Select (1-3)>3 READ ID OK.
Program Top Address & Qspi/HyperFlash Save Address
Please Input Program Top Address =======[edit]
Please Input : H'e6320000
== Please Input Qspi/HyperFlash Save Address[edit]
Please Input : H'0
Work RAM(H'50000000-H'53FFFFFF) Clear.... please send ! ('.' & CR stop load) SPI Data Clear(H'FF) Check :H'00000000-0003FFFF Erasing..Erase Completed SAVE SPI-FLASH....... complete!
= Qspi/HyperFlash Save Information ===========[edit]
SpiFlashMemory Stat Address : H'00000000 SpiFlashMemory End Address : H'00000E67
===============================================[edit]
>xls2
Qspi/HyperFlash writing of Gen3 Board Command ========[edit]
Load Program to Spiflash Writes to any of SPI address. Please select,FlashMemory.
1 : QspiFlash (U5 : S25FS128S) 2 : QspiFlash Board (CN2: S25FL512S) 3 : HyperFlash (SiP internal) Select (1-3)>3 READ ID OK.
Program Top Address & Qspi/HyperFlash Save Address
Please Input Program Top Address =======[edit]
Please Input : H'44000000
== Please Input Qspi/HyperFlash Save Address[edit]
Please Input : H'1C0000
Work RAM(H'50000000-H'53FFFFFF) Clear.... please send ! ('.' & CR stop load) Program over size Error
SpiFlashMemory Stat Address : H'001C0000 SpiFlashMemory End Address : H'105C05D3
>xls2
Qspi/HyperFlash writing of Gen3 Board Command ========[edit]
Load Program to Spiflash Writes to any of SPI address. Please select,FlashMemory.
1 : QspiFlash (U5 : S25FS128S) 2 : QspiFlash Board (CN2: S25FL512S) 3 : HyperFlash (SiP internal) Select (1-3)>3 READ ID OK.
Program Top Address & Qspi/HyperFlash Save Address
Please Input Program Top Address =======[edit]
Please Input : H'e6302000
== Please Input Qspi/HyperFlash Save Address[edit]
Please Input : H'40000
Work RAM(H'50000000-H'53FFFFFF) Clear.... please send ! ('.' & CR stop load)
